Cannot install Windows on disk 0 partition 1

Similar Questions

• Cannot install windows vista disk

  Hi everyone im new to this so sorry if I met so well dnt

  I need to reinstall vista on my computer toshiba laptop, but when I boot on cd/dvd disc does not start and comes up with errors

  any1 can help all

  x

  A recovery disk, you must contact the manufacturer for assistance and/or replacement (or tell you how to make your own from the partition of recovery if you have a).  We cannot help you because these discs are manufactured by the manufacturer - not Microsoft.  Each manufacturer does differently and just, we do not have this information.

  Here is Microsoft's policy on replacement software: http://support.microsoft.com/kb/326246.

  I hope this helps and I'm sorry, that we cannot do more to help.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot install windows 7, error: Windows cannot be installed to this disk. The selected disk is the GPT partition style.

  Original title: Install windows 7 on GTP style partition

  Nice day

  I try to install windows 7 on my laptop but there is a massege
  Say cannot install windows on the selected drive cos it's GTP
  Partion of style, I was using before windows 8 but then format
  My hard drive please guide me on how to archive this because only through
  I'm really frastrated

  Hi Nnrmalata,

  1. you are trying to install 32-bit or 64-bit Windows 7?

  2. What is the brand and model of your computer?

  Boot from GPT is only supported for 64-bit of Windows 7 on UEFI-based systems.

  For more details, refer to this link:

  http://msdn.Microsoft.com/en-us/Windows/hardware/gg463525.aspx

  If your computer does not support UEFI, back up your important data to an external drive and delete all partitions on hard drives and create a new partition.

  (a) start from the Windows 7 DVD

  (b) click on install now

  (c) in the configuration screen, click Custom (Advanced)

  (d) click on drive Options

  (e) select the partitions to format

  (f) click on Format - this will erase EVERYTHING on this partition

  (g) create a new partition, and then select a partition to install Windows on.

  (h) follow the on-screen instructions and install Windows.

  Note: Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  You can check the link for reference:

  http://TechNet.Microsoft.com/en-us/library/dd799232 (WS.10) .aspx

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If above did not help, please refer to the steps in this link.

  Note: Backup your important data to an external drive

  Change a Table of Partition GUID drive on a main boot drive

  http://TechNet.Microsoft.com/en-us/library/cc725797.aspx

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Cannot install Windows on this disk selected disk.the has a MBR partition table. On EFI systems, windows can be installed only on GPT disks.

  Cannot install Windows on this disk selected disk.the has a MBR partition table.

  On EFI systems, windows can be installed only on GPT disks.

  When I try to install WS2008R2 in my turn lenovo G580 i5-3210 as a dual-boot option.

  Hello Pratap ReddyBh,

  As you try to install Windows Server 2008 R2, it would be better for you to ask your question in the TechNet Windows Server forums.
  Click on the link here for TechNet.

  Thank you

  Marilyn

• Cannot install windows via bootcamp (Imac Mid 2011)

  Hi, I struggled for the last 2 days and can't seem to find how to create a windows partition and installed it.

  Note: I have a 27 inch mid 2011 Imac and run MacOS Sierra 10.12.

  I have problems with bootcamp especially at the stage of the process USB drive.

  1. I do not understand why Bootcamp assistant 2 display only tasks being #1 download the windows software and #2 install windows 10 when all apple support pages show 3 different tasks available as here https://support.apple.com/en-us/HT205016http ://

  

  2. I prefer to install windows 7 on my partition, bootcamp, however 'install windows 10', which means that I can't install an older version on my partition? I tried to install windows 7 via a win7 .iso file AND a win10 .iso but none of them works.

  3. whenever I try to install windows, the system do not recognize my USB (it would be with .iso win10 associated drivers or Win7 .iso. + drivers associated) and constantly asking for a disc to be inserted.

  

  My USB has been formatted through disk as MS-DOS (FAT32) volume and all utility used .iso comes from Microsoft. I don't understand why I can't have my. ISO recognized by the system.

  Help please :)

  Damien Kitsune wrote:

  1. I do not understand why Bootcamp assistant appear only the 2 tasks being #1 and #2 install windows 10 download windows software when apple support pages show 3 different tasks available as here https://support.apple.com/en-us/HT205016

  This is normal and expected behavior. Your 2011 Mac does not support the USB Windows installation. You must use a physical DVD burned ISO. Your Mac does not officially support Windows 10. The ISO files are available at https://www.microsoft.com/en-us/software-download/home .

  Documentation on Apple's site shows not all models. Please visit https://help.apple.com/bootcamp/mac/5.0/help/ for an older version (FC5).

• Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  The Recovery Manager starts well. He correctly completed the following steps:
  1 format HDD

  2. copy the files from the CD to the drive. It copies all the 3 CD.

  Then he ask the driver (the 4th CD) CD. Once I have this CD, then after awhile I get messge below:

  Contact HP support

  In most cases, recover the hard disk will solve your problems.

  If your problem persists, you may have to contact HP support. Find details of support HO in the documentation of your PC.

  After that I see above meaage the only button I can click is "Finish". Once I click on finish, then in a minute, I get a message that "recovery completed successfully.

  The laptop restarts and displays the message on the screen "Bootmger" not found

  I called HP support and asked to run the hard drive and memory test and he succeeded.

  I can install windows on another CD I have with.

  But I can't install WIndows using the recovery CD, I received from HP. It's the 2nd CD series that I received these don't work or the other.

  I have two identical laptops. Tried installing on both and having the same problem on both.

  Can you please help with this.
  HP sends fake CDs?

  Kind regards

  Hello

  Here is another solution, you can try to see if you can get Windows 7 to install correctly.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• ThinkPad R60 cannot install Windows XP After erasing the HARD drive using the lenovo diagnostic utility

  WinXP pro Setup cannot find that any installed HARD disk so cannot install windows. Unfortunately after many attempts to use rescue and recovery to restore the factory settings and for some reason constantly default... After leaving another utility popped up giving me the opportunity to erase the HARD drive and so I did... After fact as well and all I had was a blank screen, no windows more or no matter what utility to reinstall windows, then I used my winxp pro installation CD, but the program installation would continue not after a certain point by saying that the installation did not find any HARD disk installed. followed by "ensure that any disk HARD r turned on and correctly connected, and that no matter what material associated drive configured correctly, this may involve running a manufacturer provided diagnostic or Setup program. Clearly it took me by surprise. What was supposed to be a cut to white erase and reinstall now me baffled and angry. Formats the HDD of the solution? If so why didn't not the usefulness of lenovo do... If not, what is the problem? Someone help pls

  Welcome to the forum!

  Go into the BIOS (F1 at startup), set the "compatible" SATA mode (NO AHCI), then press F10 to save and exit, and you should be all set.

  Good luck.

• Cannot install Windows 7 Professional 64 bit on HP Envy 4-1053TX (AVL)

  1. product name and the number: HP Envy 4-1053TX (B9K16PA #UUF)

  Windows 2 operating system installed 7 Home Premium 64-bit

  3 error message/symptom: blue screen * STOP: 0x0000007B (0FxFFFFF880009A9928, 0xFFFFFFFFC0000034, 0 x 000.., 0 x 000...)

  4. all changes made to your system until the problem occurred pre-installed Windows 7 Home Premium, trying to get at operating system level to Windows 7 Professional 64-bit using free license.

  5 cannot install Windows 7 Professional 64 bit which is open license. No player appears when Windows DVD/USB boot. Tried to install when Windows is running, appear a blue screen upon restart.

  Hello

  I see that you have a problem in the installation of new Windows USB port. It seems that your HDD was not detected, right? It's because your laptop uses a SATA HDD.

  what you need to do are:

  1. download the driver AHCI SATA website of intel. (just google it)

  2. copy the files (size 700 KB for 6 files) into the new USB

  3. reboot and install your laptop with win 7 (dvd/usb)

  4. by the time win 7 installation reached the drive to install (none detected), click load drivers.

  5. now load your other USB SATA drivers.

  6. then will show all disks in your system.

  7. continue with the installation process.

  hope this helps.

• Cannot install Windows 7 on an external hard drive

  Mr President, I want to install win7 in external hard drive operating system, but I get an error message saying "windows cannot be installed on this configrationof installation or installation on the disk drive, connect to a usb port or ieee 1394".my contact no. is 09660166247 and my email is * address email is removed from the privacy * help

  Cannot install Windows 7 on an external storage device. You must install it on an internal storage device.

• Cannot install Windows updates (has no status) on the computer desktop and laptop

  Desktop               (Purchase date: 13/07/2010)

  Model: Pavilion p6402f or 6402f

  Product: BK275AA #ABL

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 1 64-bit

  Product ID: {removed privacy}

  Portable               (Purchase date: 14/07/2011)

  Model: Pavilion g6 Notebook PC

  Product: QD317UA #ABC

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 164-bit

  Product ID: {removed privacy}

  Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

  No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

  Method of connection: wireless

  Technical expertise: intermediate level

  Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

  Hello amib004,

  As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

• Cannot install windows XP on the Satellite Pro A200-1N2

  Jin

  I have a Toshiba Satellite A200 - 1N2 PSAE3E and I don't want Vista on my laptop. I downgraded the bios to V5.30 but still cannot install windows xp and there is still no optin for SATA in the bios.

  Can someone help me?

  Thank you.

  Hello

  Did you install the SATA drivers first?
  You need this driver to recognize the HARD drive!

  You must download the Intel Matrix Storage Manager. You should find it on the page of the Toshiba driver or the Intel Web site.

  You must perform the installation of an external USB FDD drive using the F6 key during the installation of Win XP.

• Cannot install Windows server 2012

  Cannot install Windows server 2012. Whenever I get * error

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Error code: 80246007 (cannot install Windows Live Essentials 2011)

  I don'tseem able to install updates automatic, quest is my wide ban and they switched to norton antiviris of a care of windows live, had problems since I went.  Cannot install windows live essentials completely, still the same code error 80246007.

  I already changed the setting in "bits" to allow updates to day and downloads by following the instructions in the help, no change can not load low HP Essentials * msi.

• Cannot install window updates 14 altogether 646 of the code

  Cannot install window updates 14 altogether 646 of the code

  luckyslap,

  read the problems known in this page, they explain what to do. There is a link to a fix the article.

  http://support.Microsoft.com/kb/2258121

  Let us know if this helped.

• Cannot install Windows update - error 8007003 - updated fails repeatedley

  Cannot install Windows update - error 8007003 occurs whenever I try to update

  Would have been nice if you included the Windows operating system you are using, but nevertheless (pick that applies to you).

  Windows XP

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  When you search for available updates on the update site, you see the Error 80070002 0 x or 0 x 80070003
  http://update.Microsoft.com/windowsupdate/v6/showarticle.aspx?articleid=17&LN=EN&IsMu=false

  Error message when you try to download the updates on the Microsoft Windows Update Web site or from the Microsoft Update on a Windows XP computer's Web site: "0 x 80070003".
  http://support.Microsoft.com/kb/916248

  Vista

  Windows Update error 80070003
  http://windowshelp.Microsoft.com/Windows/en-us/help/dc8636cd-4742-4e4e-B07C-a8cc9c684b261033.mspx

  Description of the update of the system for Windows Vista tool
  http://support.Microsoft.com/kb/947821
  0 X 80070002 ERROR_FILE_NOT_FOUND

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  Error message when you try to download updates from Windows Update on a computer that is running Windows Vista: "error 0 x 80070003 the system cannot find the path specified."
  http://support.Microsoft.com/kb/942967

  And here's one for Windows 7

  Windows Update error 80070003
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070003

  TaurArian [MVP] 2005-2010 - Update Services