Why not, t I receive my Security Center to run on windows xp, I was told to contact microsoft

Similar Questions

• I have an Acrobat 9 pro I want to reinstall on acomputer that has been reformatted. the serial number I have does not work. I talked to your support on the phone and was told to contact you. Help! Thank you Beni

  I have an Acrobat 9 pro I want to reinstall on acomputer that has been reformatted.

  I have the serial number: [deleted by Moderator] does not work.

  I talked to your support on the phone and was told to contact you.

  Help!

  Thank you

  Beni

  b. sagi

  Please, do not share your serial number on the public forums.

  Also confirm you are correctly using the serial number, serial number Adobe contain 24 digits.

  Once you have found the correct serial number, see links below

  Error "invalid serial number". Acrobat 9 | CS4

  Error "serial number is not valid for this product". Creative Suite

  Invalid serial number error

• Why should I manually start the Security Center when windows loads

  When the load windows vista, I get a warning "check your Security Center.
  I have to then turn manual Security Center. Why?

  Hello

  1 are logged as administrator?

  2 How long have you been faced with the question?

  3. do you have security software installed on the computer?

  4 did you a recent software or changes to the material on the computer?

  I suggest you to go through the steps mentioned in the article and the Coachman.

  Windows Firewall is turned off every time I start my computer

  http://TechNet.Microsoft.com/en-us/library/cc749262 (v = ws.10)

  See also:

  Using Windows Security Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-Windows-Security-Center

  Disable Security Center alerts

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-Security-Center-alerts

  Hope this helps and keep us informed if you need help.

• Security Center and updates of Windows do not work on Vista laptop

  I have a laptop Dell Inspiron with Vista 1405E.    The Security Center and Windows updates do not work.

  I ran Norton Utilities to clean the registry and I deleted Norton Antivirus (completely, following the instructions from Symantec on the phone), but nothing has changed.  Any suggestions on what could be the problem?

  Thank you

  Should I remove S * PERAantiSpyware from my computer?

  If it is not necessarily - free SAS, but if all were fine with your computer (and it's not!), you should not have installed SAS because MSE includes a component of anti-malware.

  Should I install the [definitions optional updates offered by Windows Update MSE]?

  You pouvez install them but this is not necessary - assuming that MSE is installed & working properly... but I suspect that this is NOT the case!  See this FAQ: http://answers.microsoft.com/thread/74e507b8-f6da-4eca-8ce7-d1aca7d3f1ba

  [Microsoft] Security Essentials is related to the Security Center?

  Yes. Security Center monitors the status of the firewall, automatic updates and Protection against malware (anti-virus & anti-malware; applications i.e. Microsoft Security Essentials).

  Translation: Since the Security Center still cannot be permanently turned on, there is a very good chance that MSE and Windows Firewall will not work correctly - despite the fact that we have now managed to get the computer fully patched to Windows Update and despite the multi-step fix, I had to make.

  In your case, there are several possible causes for this behavior:

  1. your McAfee subscription and/or your previous subscription of Norton AntiVirus may have expired before that you did something;

  2. do not run the remove McAfee & Norton tools at the right time; or...

  3. misguided use of registry cleaners.

  So, what can you do about it?...

  OPTION A: MSE support could be able to help you. Residents of the United States (only!) should be able to open a support incident free of charge by e-mail via this page-online https://support.microsoftsecurityessentials.com/default.aspx?productkey=morrolaunch&mkt=en-us&st=1&wfxredirect=1

  Note: After selecting your option, language (e.g., English-US) and clicking the button CONTINUE, click on the EMAIL button, not the FORUM button!

  OPTION B (recommended): See the poster in this thread and follow the instructions of (my) WHOLE (to the letter and in order! ) to restore your computer to a State safe & functional: http://answers.microsoft.com/thread/c44429fb-3f7c-4646-8529-5a97bb3cd0eb

  If these procedures are outside your technique "comfort zone" - and there is no shame in admitting this isn't your cup of tea - take the local computer, reputable and independent (i.e., not a 'BigBoxStore' or Geek Squad!) computer repair shop & let them do the work.

  IMHO your computer must NOT be connected to the internet or local area network (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you. Good luck!

• Windows Security Center indicates the firewall Windows is off, but when I click on the Windows icon fire, he says his ONE. How to make sure it's on?

  I tried to install SP3 on Windows XP Home edition without success. MS wrote cut all firewalls and antivirus software. Yes, I did. SP3 cannot be installed, and now I have problems with XP. It's just one of the problems. Is there a way to veryify my firewall is actually turned on even if the icon says it is DISABLED?

  Hello

  ·          Y at - it any other security software installed on your computer?

  A possible reason for this problem is that you have installed entirely or partially on the computer security software conflict. Remove all other computer security software

  Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://onecare.live.com/site/en-us/default.htm

• After you have reinstalled Windows XP, I was told that my product key is not valid.

  Hi, my system rescently hang so I reinstall the window d and that I did exactly the same procedure as the first. Unfortunately, I was told THAT the product key is incorrect. What should I do in order to get the window started? My existing product code is * removed product key *. Thks

  original title: Activation of the window

  Remove your product key of this ticket. \

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the letters and numbers (number 8 for the)
  Letter B, etc.).

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• Why is there a circle in the center of the browser window?

  Hello

  Sometimes when you browse the web, Firefox displays a circle cross - like in the middle of the screen. This just started a few weeks ago. I could not find any information about it. It seems to happen when I type in the fields of form like this. But then it persists even after that I go to another page or another site. Could this be a problem with an add-on? I have AdBlock Plus and installed Ghostery.

  Anyone know why this is happening and how to make it stop?

  Thank you.

  It's the mouse pointer changes and does not change back? In this case I guess an add-on, perhaps related to the filling of the form?

  Or is it like a display problem that is superimposed on what is behind it? If it's the latter, could you try to disable graphics hardware acceleration? As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You need to restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Orange Firefox button or classic menu Tools > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

• Why not inform you how to get bookmarks in firefox on Windows XP for firefox on windows7?

  I use Firefox for many years, I never use internet explore, I have a new laptop with windows7 and old big PC with windows xp on both machines, I installed Firefox, the problem is that I can't bring the bookmarks from my old computer (it was very easy to bring them from windows xp to windows xp or from windows 98 to windows xp , but it seems impossible to put windows XP windows7 and any instructions from Firefox. If someone uses Firefox for many years, don't guard favorite not on internet explorer, please give an instruction how to get bookmarks in Firefox on windows xp for Firefox on windows 7.

  Follow these steps.

  1. Copy the portable bookmarks.htm to your new computer and save it somewhere.
  2. Open Firefox on the laptop, click on the orange button Firefox and go to history | View the whole story.
  3. Click on the link titled "import and backup" above and choose 'Import HTML'.
  4. Choose HTML file in the wizard that appears, and then navigate to where you saved the file copied from the old PC.

  If the file is not in HTML format, but . JSON format, then in the menu import and backup , choose 'Restore' instead and then navigate to where you saved the file.

  If this answers your question, please click the button solved next to this post after logging in to the forum. This will help others looking for a solution for the same topic.

  Thank you.

• My HP Deskjet 2050 will not scan. HP support have tried everything and have now given up, which suggests to contact Microsoft. Help.

  I followed the instructions from HP for 4 weeks. Nowhere!

  Hello

  "HP support have tried everything and gave up now."

  If HP has renounced their product, we can not offer much hope.

  It's their hardware and their software that runs their product.

  I suggest that you try their Support Forums, as it appears from their support of the unscrupulous company.

  http://h30434.www3.HP.com/

  See you soon.

• I tried running chkdsk/f, but I was told I did not enough privleges and had to UN mode high. What should I do?

  I tried to run chkdsk /f on my computer at home, but I was told I had no sufficient privileges and had to run chkdsk /f in elevated mode.  How can I get enough privilege or run in elevated mode?

  In Windows 7, you can use a command-line high;
  http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html

• Error - Connection Internet Service does not start when try to start Windows Security Center.

  Original title: Windows security center usually run in windows XP.

  When I open the control panel and click on security, Windows Security Center indicates that it is not executed and wont run then when I try to turn it on I say error message does not start internet connection service. Also, my computer has been slowing way down lately and it takes forever to do even the simplest taskes. I just uninstall norton because my subscription ran out and then I installed MSE and malwarebytes MSE runs even slower, so I got rid of him.

  -Edit
  I also tried to use FixIt, but he said that there was an error during installation.

  Thank you. I had security work center. That's how I did it.

  I wen to your link and found that I needed to go to start-my network places - view the network (in the sidebar) connections - click Properties (click on) Local Area Connection 2 - click on the Advanced tab - click settings (skip this step if who does not appear)

  now, here, he said that there is an error and that I needed to start a process. I think it was 'Windows management instrumentation' but whatever it is, click Activate and change the startup type to automatic, and then click Start. then try to then you should do the same thing with

  • Application Layer Gateway Service
  • Network connections
  • Knowledge of the network (NLA) locations
  • Plug-and-Play
  • Remote Access Auto Connection Manager
  • Remote Access Connection Manager
  • Remote procedure call (RPC)
  • Telephony

  Then Security Center. When you press OK in the properties, you should see a small lock appears on the network connections icon. now Security Center should work.

  useful articles:
  http://support.Microsoft.com/kb/919291
  http://support.Microsoft.com/kb/827328
  http://TechNet.Microsoft.com/en-us/library/bb457029.aspx

• my computer does that in safe mode, it does not start in normal mode, my Security Center opens not or my updates of the widow.

  Hello

  my computer has stopped working on normal mode. I have to use my computer on safe mode.

  My Security Center lights.

  Windows dates won't turn on.

  I think having a consistency of disk.

  Can someone help me?

  Hello

  1. what exactly happens when you try to start in normal mode?

  2. do you receive any error messages?

  3. don't you make changes to the computer until the problem occurred?

   

  Method 1: Perform a system restore

  To get the procedure perform system restore, open the site mentioned below

  http://windows.microsoft.com/en-US/windows-vista/What-is-System-Restore.

  Method 2: Perform a clean boot in safe mode

  For the procedure to place the computer in a clean boot, open the site mentioned below

  http://support.microsoft.com/kb/929135.

  Note: To set the computer back to start normally, use the step 7 in the same link.

   

• Hi, my computer is in safe mode because it does not start in normal mode. I can't spend on Security Center or widows to get updates, what I can do.

  I'm in safe mode, I can't start my computer normally. I can ' t spend on my Security Center updates or the window. I tried to download vista pack 2, but it will not allow him. What can I do?

  One at a time...

  See if the following method can get out you of safe mode...

  Logon in safe mode... click the button start... in the box search, type in msconfig... Press the Enter key... Click on the start up tab...

  don't make any tick before Safe Boot... Make sure you that there are no check marks anywhere in this window... click OK when finished.

  If this does not work, please report on performance and Maintenance forum for a question of fashion safe...

  http://answers.Microsoft.com/en-us/Windows/Forum/performance?tab=unanswered

  Please post to the forum security, privacy, and user accounts for your Security Center problem...

  http://answers.Microsoft.com/en-us/Windows/Forum/Security?tab=unanswered

  and post to Windows Update for your problem of updates...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_update?tab=unanswered

• Security Center does not recognize the Windows Security Essentials

  Windows Security Essentials does not seem to register with Security Center.  Security Center reports that no Virus protection is enabled.

  1. I installed Windows XP 32 - bit WGA, activated the product and updated to SP3.

  2 security Center starts giving Windows security alerts for Virus protection, because none has been installed.

  3. I installed McAffee VirusScan.

  4 security Center stopped giving Windows security alerts for Virus protection.

  5. I uninstalled McAffee VirusScan.

  6 security Center has resumed giving Windows security alerts for protection against the viruses as before.

  7. I installed Windows Windows Security Essentials and rebooted.

  8. I tried to uninstall and reinstall Windows Security Essentials with no joy.

  Windows Security Essentials installation did not prevent Windows security alerts.  No Windows Security Essentials registry entry will appear in HKEY_LOCAL_MACHINE/Software/Microsoft/Security Center and monitoring.  If Microsoft consider essential security to be an antivirus product, then how to Windows Security Essentials register with Security Center?

  I understand that this is an information and alert issue only.  I understand that Windows Security Essentials works actually ok.  I am particularly concerned by the reports.  It conditions my deployment of Windows Home Server.  Deactivation of surveillance or the alert is not a solution, just a poor quality work around.

  In a previous thread, the author of this question even abandoned and has not requested additional assistance.  An explanation was given (relevant for Windows 7), but no solution has been offered.  Windows XP has not been addressed.   http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/the-Security-Center-has-not-recorded-an-anti-virus/15ae2383-7ced-4850-A863-f7eb8cc90ee5

  I had the same problem for a while now (I'm on xp) and have searched the Internet for a solution but found nothing at the moment.

• Windows could not start service Security Center, Windows 7

  I am using windows 7 ultimate in my laptop, but whenever I try to open the security service windows to open action center located on the menu to the Quick Launch bar, it generates an error message stating:

  "Could not start the windows Security Center service.
  No error number.

  You can try the steps below and check if the problem is resolved.

  Try to manually start the service from the Services Management Console.

  For the Services console type in the find field, then press ENTER. You will need to click continue if you are prompted to open the Services window.

  After the opening of Component Services.

  Click: Services (Local)

  At the bottom of the window there will be two tabs, click: Standard

  After that will appear a list of services, including Security Center

  In this window, you must locate the Security Center service do a right click it and go to Properties, select Automatic, and then click apply , then select Start.

  If your Security Center turns off automatically after a few seconds or minutes, proceed as shown in the following post:
  COMBOFIX WORKED FOR ME! in Windows 7
  My symptoms were the same as above. Only when affecting the automatic Security Center service, and the startup, it automatically set it to homes disabled after a few seconds or more.
  This solution worked for me,
  -activate the hidden administrator account by following the steps on this tutorial... http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-windows-vista/
  -Once finished activating in the command prompt, to bookmark the websites for later use and log on to Windows.
  There is now an administrator option in the logon screen.
  -log on to the administrator account open a browser and open this page again.
  -Click on this link below and download to your desktop... http://www.combofix.org/downloadlink.php
  -disable your connection and internet anti-virus software.
  -Now run combofix.exe
  A window will appear and many scans will take place. It will take some time. Finally, the computer may restart. When this is the case, log back in the administrator account and Combofix will resume running for a little while. Do nothing until the log file appears automatically.
  -Restart your pc and you log in Administrator account.
  -now set the Security Center service back to automatic, then click on apply. Then, click on start and ok.
  -Restart your PC and you can now log in to your normal user account.
  Everything should work now... Well, it did for me.
  If you want to disable the account again, you can do so by following the steps to disable in the link above.
  After HAVING finished with "Combofix" you may have to restart your computer once more, and then go to "Security Center" again via "Component Services" and Activate and Start Security Center. This time, it will work for good.
  I hope this helps and good luck!