Cannot load a Html5 page in the BrowserField

Similar Questions

• New installation of windows 10 over windows 7, cannot load any web page, all the patches to Firefox?

  I find some information about the SSL problems and that you have copied certificates internet options, but that still does not solve the problem. Firewall is turned off, while trying to solve the problem. Microsoft edge is able to get on the web pages that I have also tried with Firefox. Loading Firefox, it seems that his will display the homepage for a micro second then displays only a blank page, no error message any. Could not include any troubleshooting info from Firefox since then I can not to show anything. Any other ideas?

  After a complete reset of the TCP stack, Firefox has been completely works again.

  In short, I ran fallow on the start menu: cmd (ctrl + shift + enter) to run it as admin, then each of these command lines, if after you run the commands, the system asks to be restarted to complete, do.

  ipconfig/flushdns
  ipconfig/registerdns
  ipconfig/release
  ipconfig / renew
  NETSH winsock reset catalog
  NETSH int ipv4 reset reset.log
  NETSH int ipv6 reset reset.log

  Thanks for your help jscher2000.

• When I run mozilla or open a link in a new window but I get the page you want to load an additional page of the new tab opens with it, the difficulty?

  When I launch mozilla or open a link in a new window I get the page you want to load but an additional page of the new tab opens with her. I tried to change my homepage to different things (new tab, firefox home, see the blank page) but I always get a new additional tab to open. How can I get only one page to open it?

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  For Firefox versions prior to 29,0:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the "Reset Firefox" line

     

     button.

  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  For Firefox 29,0 and above:

  1. Click the menu button

     

     click Help

     

     and select troubleshooting information.

  Now, should open a new tab containing your troubleshooting information.

  1. At the top right of the page, you should see a button that says "Reset Firefox"

     

     . Click on it.

  2. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  3. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• How to load a web page with the Web page class

  Hello world

  I try my app to display the title and favico starting from a given url without showing the content of the Web page itself using the class bb::cascades:WebPage, but after the constructor method and setUrl, apparently not start the loading content and methods title() both icon give anything (or loading())

  Any idea on how to load the webpage using this class?

  void handleInvoke (const bb::system:InvokeRequest & request) {}

  Web page * bookmark = new WebPage();

  Bookmark-> setUrl (request.uri ());

  root->findChild ('message')-> setProperty ('text', QString (bookmark-> title()));

  }

  Thanks in advance

  Diego

  I have use the class Web page, but the documentation, it seems you should subscribe to the loadingChanged signal and wait for the download to complete. The download can begin asynchronously so loading() might return false immediately after the definition of the URL.

  https://developer.BlackBerry.com/Cascades/reference/bb__cascades__webpage.html#loadingchanged

• Get an error loading a Web page in the Panel with require

  Hello

  I'm trying to load a remote Web page in the control panel. I followed the example here: samples/Trello to master · Adobe-CEP/Samples · GitHub

  I also added the lines here to make sure that versions require node / module do not interfere with my requireJS I loading: CEP 6 HTML Extension Cookbook for 2015 CC · Adobe-CEP/CEP-resources Wiki · GitHub

  However, this is the error that I see, that require resources that he always uses a function node according to me: requireError.js

  In fact, I realized what I was doing wrong, what was obvious after the fact. The problem is that if I reload the page, of course my redefine require it and functions of the module will be lost. I had to add the node require redefinitions on the page that was being loaded.

• Error message: (translated from Dutch) 'Cannot find corresponding style page for the query.

  Error message: (translated from Dutch) ' cannot find corresponding style page for media interview "(see picture).

  I can't find what the problem with this page: steun Yolaine

  This message does not appear on the other pages of this site...

  What I've done wrong?

  Thanks in advance!

  Martian

  

  There are two things that are probably the origin of this error.

  Line 22 in your HTML code looks like this:

  Hi all!
  I created 2 custom pages "EITPersonPG" and "EITPersonMainPG" and imported in the SDM repository using import.bat. I created a function to 'EITPersonPG' and he added in the menu. I can open my pages in the menu directly, but when I try to open "EITPersonMainPG" of "EITPersonPG" I get this error:
  "
  oracle.apps.fnd.framework.OAException: no data available for the region (ibsborlas/oracle/apps/by/EIT/webui/EITPersonMainPG).
  ...
  # # 0 in detail
  
  Exception:
  oracle.adf.mds.MetadataDefException: unable to find the component with an absolute reference = ibsborlas/oracle/apps/by/EIT/webui/EITPersonMainPG, XML Path = null. Please check that the reference is valid and the definition of the component on the file system or in the MDS repository.
  ...
  "
  I executed "(exec jdr_utils.printDocument('/ibsborlas/oracle/apps/per/eit/webui/EITPersonMainPG');" in Sql and it's OK.
  I created a function to 'EITPersonMainPG' and he added in the menu. I can open it.
  
  I can open "OA.jsp?page=ibsborlas/oracle/apps/per/eit/webui/EITPersonMainPG" from the menu, but it cannot open 'OA.jsp?page=ibsborlas/oracle/apps/per/eit/webui/EITPersonPG '.
  What must I do in order to open 'EITPersonMainPG' to 'EITPersonPG '?
  
  Thanks in advance.
  Pavel.

  Hi Pavel,

  Instead of

  OA.jsp?page=ibsborlas/oracle/apps/per/eit/webui/EITPersonMainPG

  use

  OA.jsp?page=/ibsborlas/oracle/apps/per/eit/webui/EITPersonMainPG

  You missed a ' / '.

  Thank you
  Anoop

• Cannot load web Member page

  After the updated 50.0.2 I can't access my page of Member on ancestry.com , loading the ancestry normally web page, but when I connect and press ENTER, I get the message that the requested URL is not found, please make sure of course that you have entered it correctly. It loads normally with microsoft edge, so it's something in the latest version of firefox, which seems to be to block it.

  If you use a bookmark or a link that specific GET data added to the link or a page that was requested by submitting a form with the POST data to open a specific page on the server, and then try to access this page from the homepage or the login page in case this bookmark/link is currently broken. If you use a bookmark, then try to navigate to this page from the homepage or the login page in case there is a problem with this bookmark.

  Best is to avoid bookmarking a specific page requested by sending POST data in a (hidden) form or bookmarking a page that contains the GET data added to the URL (? xxx = xxx) or links to a specific subdomain (xx #. example.com) where load balancing is used as a link can easily get broken in case of changes on the server.

  Clear the cache and delete cookies from Web sites that cause problems via the '3-bar' menu button of Firefox (Options/preferences).

  "Clear the cache":

  • Firefox/Options/preferences of-> advanced-> network-> cached Web content: 'clear now '.

  'Delete cookies' websites that are causing problems.

  • Firefox/Options / preferences-> privacy-> "Use the custom settings for history"-> Cookies: "show the Cookies".

• Cannot setParent to a page after the call to resetScene

  Previously, I put a Page as the scene. If I try to reset it, then set the stage with a TabbedPane then it works fine. But if I want to reset the stage and then you want to define it is parent to null and then delete then I get exception while affecting the null parent or another object. Why its happening?

   AbstractPane *pane = this->app->scene();
      this->app->resetScene();
      if(pane != NULL)
      {
          pane->setParent(NULL);// exception here
          delete pane;
      }
      this->app->setScene(filteringPane);
  

  Thank you.

  If the Page is administered by the Application, I suspect that resetScene() it suppresses contrary the docs.

  This seems logical, because the docs of setScene say that the previous scene is deleted if it is owned by the Application. I don't see why resetScene() would work the same:

  http://developer.BlackBerry.com/native/reference/Cascades/bb__cascades__application.html#function-se...

  So, it seems like it after a call to resetScene() as the old pane no longer exists.

  'pane' become not NULL because it is just a local variable that contains an address, resetScene() can not change it.

• After updating to Firefox 9, the browser cannot load a Web page.

  When I try to visit a Web page there is an error message saying that Firefox cannot connect to the server and suggesting that I check the internet connection, no matter which Web page, I try to visit. I use Internet Explorer right now to be able to report this problem...

  See this support article - difficulty of problems connecting to websites after Firefox update

• How to load several HTML5 canvas on the same page (the right way)

  Hello

  I struggled to load several animations of canvas on the same page. At the beginning, I thought that export movies with different namespaces and reload the libraries in a sequential workflow might work, but it doesn't. It still load just the last loaded movie. More info here: coding challenge: what am I doing wrong?

  Here's a sample of what I'm doing:

  1: publish two flash animations with namespaces customized to "lib" defined in the "publication settings": "libFirst" and "libSecond".

  2nd: Edit the canvas tags in the HTML page. One called "firstCanvas" and another one called "secondCanvas".

  3rd: change the javascript like this:

          <script>
              // change the default namespace for the CreateJS libraries:
              var createjsFirst = createjsFirst||{};
              var createjs = createjsFirst;
          </script>
          <script src="//code.createjs.com/easeljs-0.7.1.min.js"></script>
          <script src="//code.createjs.com/tweenjs-0.5.1.min.js"></script>
          <script src="//code.createjs.com/movieclip-0.7.1.min.js"></script>
          <script src="{{assets}}/js/first.js"></script>
          <script>
              function initFirstAnimation() {
                  var canvas, stage, exportRoot;
  
                  canvas = document.getElementById("firstCanvas");
                  exportRoot = new libFirst.first();
  
                  stage = new createjsFirst.Stage(canvas);
                  stage.addChild(exportRoot);
                  stage.update();
  
                  createjsFirst.Ticker.setFPS(libFirst.properties.fps);
                  createjsFirst.Ticker.addEventListener("tick", stage);
              }
          </script>
          <script>
              // change the default namespace for the CreateJS libraries:
              var createjsSecond = createjsSecond||{};
              var createjs = createjsSecond;
          </script>
          <script src="//code.createjs.com/easeljs-0.7.1.min.js"></script>
          <script src="//code.createjs.com/tweenjs-0.5.1.min.js"></script>
          <script src="//code.createjs.com/movieclip-0.7.1.min.js"></script>
          <script src="{{assets}}/js/second.js"></script>
          <script>
              function initSecondAnimation() {
                  var canvas, stage, exportRoot;
  
                  canvas = document.getElementById("secondCanvas");
                  exportRoot = new libSecond.second();
  
                  stage = new createjsSecond.Stage(canvas);
                  stage.addChild(exportRoot);
                  stage.update();
  
                  createjsSecond.Ticker.setFPS(libSecond.properties.fps);
                  createjsSecond.Ticker.addEventListener("tick", stage);
              }
          </script>
  
  <body onload="initFirstAnimation(); initSecondAnimation();">
  
  
  
  

  Could someone please answer with best practices on how to do it? If possible, without the need to reload all libraries...

  If I only need to show a flash animation at the same time, it would be more efficient to cut/paste the canvas using jQuery tag in the DOM and reload a different lib on this subject?

  Thank you very much!

  #flash #reborn

  I was able to remedy. In the end, it was easier than I thought. Just publish using namespace different 'lib' for each film, load all the scripts at the end of theand add the following in the onload or ready events:

  $(document).ready(function () {
  
          var canvas, stage, exportRoot;
  
          // First movie
          canvas = document.getElementById("firstCanvas");
          exportRoot = new libFirst.first();
  
          stage = new createjs.Stage(canvas);
          stage.addChild(exportRoot);
          stage.update();
  
          createjs.Ticker.setFPS(libFirst.properties.fps);
          createjs.Ticker.addEventListener("tick", stage);
  
          // Second movie
          canvas = document.getElementById("secondCanvas");
          exportRoot = new libSecond.second();
  
          stage = new createjs.Stage(canvas);
          stage.addChild(exportRoot);
          stage.update();
  
          createjs.Ticker.setFPS(libSecond.properties.fps);
          createjs.Ticker.addEventListener("tick", stage);
  
          // Third movie
          canvas = dument.getElementById("thirdCanvas");
          exportRoot = new libThird.third();
  
          stage = new createjs.Stage(canvas);
          stage.addChild(exportRoot);
          stage.update();
  
          createjs.Ticker.setFPS(libThird.properties.fps);
          createjs.Ticker.addEventListener("tick", stage);
  });
  

• cannot connect to windows because of password required, cannot load mode safe due to the accident.

  Hello

  I'm using Win XP Professional SP2 and I uninstalled my modem high speed orange and speedtouch thomson 330 USB modem software, then I restarted the pc. To restart, I have to open a session I've ever had to do before. the user Pc button requires a password that I was never assigned. Ive tried Admin, admin, etc, and even white. When I enter a password that I don't have any idea what it is, saying "the system cannot log because the LAN1 domain is not available.

  This pc was never part of a domain or a server. nor that I never had to log on before windows. Please can someone help? I understand that restart in safemode and signing in administrator will help, but when I restart in safe mode the pc turns off windows loading page. Please can someone help? I have a lot of work and no backup of my hard drive. I don't have a windows XP CD when I bought the pc.

  My pc is a dual core athlon 64-bit
  Windows xp Pro sp2
  2 GB of ram

  Thank you, Marcos.

  Marcos82,
  So it appears your system tries to connect to a domain.  You should have an option in the login screen to change the domain that you log in.  You will be able to change it to connect to any PC.
  Have you tried "Last known good configuration" among the startup options?  If this is not the case try first and see if it's back to normal.

  Post back with the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Occasionally Safari for Mac does not load web pages; Firefox is loading of web pages. The possible reasons?

  I started having this problem around mid-2016. In short, if I use Safari to surf the internet, after about 5-10 minutes, Safari would not completely load the page not load completely. If I turn off my wifi then return (on the macbook), the page will load temporarily. On the other hand, Firefox does not have this problem and loads web pages normally. Possible reasons or solutions?

  I do not think that the problem comes from my internet connection or your router because my iPhone Safari normally connects under the same network.

  I use a Macbook Air, OSX V. 10.11.3 (El Capitan)

  Go step by step by step and test.

  1. turn off the power to the router. Unplug it from the wall. Wait a while.

  Plug it in, back to the wall. Turn on the router. Wait for all lights are light up properly. It will take a while.

  Restart the computer.

  Boot mode safe.

  https://support.Apple.com/kb/PH18760?locale=en_US

  2 remove Caches.db

  Close all windows and close all applications.

  Hold down the 'option' key, then click on the "Go" menu in the Finder menu bar.

  Select 'Library' in the menu dropdown.

  Library > Caches > com.apple.Safari > Caches.db

  Right-click on the Caches.db file and select "move to trash".

  Close the windows.

  Restart and restart Safari.

  3 empty Caches

  Safari > Preferences > advanced

  Tick the box "Show develop menu in menu bar."

  Develop menu will appear in the Safari menu bar.

  Click on develop and select 'Empty cache' in the menu dropdown.

  4. remove the Cookies

  Safari > Preferences > privacy > Cookies and other data from the website:

  Click on the button "Details".

  Delete all cookies except those from Apple, your internet service provider and the banks.

  5 Disable Extensions and test them.

  Safari > Preferences > Extensions

  Uncheck 'Enable the Extension' and test.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button

  If this does not help, run EtreCheck and post the report here.

  http://etresoft.com/etrecheck

  Download, open the download folder, click on it to open it and select "Open" in the dialog box to execute.

  Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste it when replying.

• Turn off the lines in the region of the table when the page loads in standard page using the CO Extension

  Hi all

  I have a requirement in standard page OAF, When page load I need to disable a region advanced table standard page column and if we add the new line this column must be activate.

  Please help an emergency.

  Kind regards

  Manoj Kumar belaid.

  Maury,

  You will have to go with SPEL. Create an extra in your VO and default attribute set to true.

  Use as the SPEL for the disabled/ReadOnly property of the column.

  Reference: advice of Oracle of Johny: OAF: Spel liaison

  See you soon

  AJ

• Firefox loads a blank page to the google search only on certain business offshore

  Google search results are are ok, some load of links to selected other Web load a blank screen, obout 25% of sites don't load, internet browser explore handle sites that fail on Firefox.

  Start Firefox in Mode safe to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  To turn on safe mode

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.
  • Once you get the pop-up, simply select "" boot mode safe. "

  If it works in Mode safe mode and normal mode with all extensions (Tools > Modules > Extensions) off and then try to find which extension is the cause by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change via "Firefox > Exit ' (Windows: Firefox/file > quit;) Mac: ' Firefox > quit Firefox. " Linux: "Firefox/file > exit ')

  • https://support.Mozilla.org/en-us/KB/troubleshoot-Firefox-issues-using-safe-mode
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes