Get an error loading a Web page in the Panel with require

Similar Questions

• New installation of windows 10 over windows 7, cannot load any web page, all the patches to Firefox?

  I find some information about the SSL problems and that you have copied certificates internet options, but that still does not solve the problem. Firewall is turned off, while trying to solve the problem. Microsoft edge is able to get on the web pages that I have also tried with Firefox. Loading Firefox, it seems that his will display the homepage for a micro second then displays only a blank page, no error message any. Could not include any troubleshooting info from Firefox since then I can not to show anything. Any other ideas?

  After a complete reset of the TCP stack, Firefox has been completely works again.

  In short, I ran fallow on the start menu: cmd (ctrl + shift + enter) to run it as admin, then each of these command lines, if after you run the commands, the system asks to be restarted to complete, do.

  ipconfig/flushdns
  ipconfig/registerdns
  ipconfig/release
  ipconfig / renew
  NETSH winsock reset catalog
  NETSH int ipv4 reset reset.log
  NETSH int ipv6 reset reset.log

  Thanks for your help jscher2000.

• Error "Cannot display Web page" when the wireless internet access.

  Original title: dubious connection

  seriously, my internet connection Wireless plays up.

  It works fine on my laptop, but on my desktop it will work well for maybe a few minutes and then all of a sudden that take forever to load pages or just say 'cannot display Web page' and that will be the end of it. Also says that I'm connected to the internet and internet access. I have done all troubleshooting, clean boot, disable the antivirus/firewall, reset tcp/ip stack, network troubleshooting, nothing is. It works for two minutes then boom, slow as a snail and then not working. If I disconnect my wireless network and reconnect it seems working again for a few minutes then slow again. Very frustrating, any advice appreciated

  This has only started happening last week?  You have McAfee on your desktop PC?

  If so,.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the removal of McAfee Development tool, they mention a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  - - - - - -

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

• Occasionally Safari for Mac does not load web pages; Firefox is loading of web pages. The possible reasons?

  I started having this problem around mid-2016. In short, if I use Safari to surf the internet, after about 5-10 minutes, Safari would not completely load the page not load completely. If I turn off my wifi then return (on the macbook), the page will load temporarily. On the other hand, Firefox does not have this problem and loads web pages normally. Possible reasons or solutions?

  I do not think that the problem comes from my internet connection or your router because my iPhone Safari normally connects under the same network.

  I use a Macbook Air, OSX V. 10.11.3 (El Capitan)

  Go step by step by step and test.

  1. turn off the power to the router. Unplug it from the wall. Wait a while.

  Plug it in, back to the wall. Turn on the router. Wait for all lights are light up properly. It will take a while.

  Restart the computer.

  Boot mode safe.

  https://support.Apple.com/kb/PH18760?locale=en_US

  2 remove Caches.db

  Close all windows and close all applications.

  Hold down the 'option' key, then click on the "Go" menu in the Finder menu bar.

  Select 'Library' in the menu dropdown.

  Library > Caches > com.apple.Safari > Caches.db

  Right-click on the Caches.db file and select "move to trash".

  Close the windows.

  Restart and restart Safari.

  3 empty Caches

  Safari > Preferences > advanced

  Tick the box "Show develop menu in menu bar."

  Develop menu will appear in the Safari menu bar.

  Click on develop and select 'Empty cache' in the menu dropdown.

  4. remove the Cookies

  Safari > Preferences > privacy > Cookies and other data from the website:

  Click on the button "Details".

  Delete all cookies except those from Apple, your internet service provider and the banks.

  5 Disable Extensions and test them.

  Safari > Preferences > Extensions

  Uncheck 'Enable the Extension' and test.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button

  If this does not help, run EtreCheck and post the report here.

  http://etresoft.com/etrecheck

  Download, open the download folder, click on it to open it and select "Open" in the dialog box to execute.

  Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste it when replying.

• I bought an older version of Photoshop Elements (4.0) - in product unused in sealed original packaging. Try to install on my MacBook Air but the part was through the installation, I get this error message: "failed to install. The installer with

  I bought an older version of Photoshop Elements (4.0) - in product unused in sealed original packaging. Try to install on my MacBook Air but the part was through the installation, I get this error message: "failed to install. Setup has encountered an error that caused the installation to fail. Contact the manufacturer of the software. »

  then it is probably too old and incompatible.

• Error when running a page of the OFA with 12.1.1 (jdeveloper patch 8431482)

  Hello
  I'm working on Oracle apps R12.1.1
  I m using jdeveloper with who is mentioned in metalink patch 8431482 Doc-Id 416708.1
  I tried to run the page of jdeveloper.
  It gives me the following error.
  I checked the DBC file, and that's okay.
  can someone please throw pointers?
  Concerning
  Hitesh
  
  Logout
  
  Error page
  Details of the exception.
  oracle.apps.fnd.framework.OAException: Application: DNF, Message name: FND_GENERIC_MESSAGE. Chips: MESSAGE = java.lang.NullPointerException.
  at oracle.apps.fnd.framework.OAException.wrapperException (unknown Source)
  at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId (unknown Source)
  at oracle.apps.fnd.framework.CreateIcxSession.createSession (unknown Source)
  at runregion. jspService(_runregion.java:132)
  at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
  at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
  at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
  at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
  at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
  at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
  at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
  at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
  at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
  at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
  at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
  to oracle.oc4j.network.ServerSocketReadHandler$ SafeRunnable.run (ServerSocketReadHandler.java:260)
  at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
  to oracle.oc4j.network.ServerSocketAcceptHandler.access$ 700 (ServerSocketAcceptHandler.java:34)
  to oracle.oc4j.network.ServerSocketAcceptHandler$ AcceptHandlerHorse.run (ServerSocketAcceptHandler.java:880)
  to com.evermind.util.ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:298)
  at java.lang.Thread.run(Thread.java:595)
  # # 0 in detail
  java.lang.NullPointerException
  at oracle.apps.fnd.security.SessionManager.recordSuccess(SessionManager.java:3820)
  at oracle.apps.fnd.security.SessionManager.validateLogin(SessionManager.java:2082)
  at oracle.apps.fnd.security.SessionManager.validateLogin(SessionManager.java:1946)
  at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId (unknown Source)
  at oracle.apps.fnd.framework.CreateIcxSession.createSession (unknown Source)
  at runregion. jspService(_runregion.java:132)
  at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
  at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
  at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
  at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
  at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
  at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
  at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
  at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
  at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
  at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
  at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
  to oracle.oc4j.network.ServerSocketReadHandler$ SafeRunnable.run (ServerSocketReadHandler.java:260)
  at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
  to oracle.oc4j.network.ServerSocketAcceptHandler.access$ 700 (ServerSocketAcceptHandler.java:34)
  to oracle.oc4j.network.ServerSocketAcceptHandler$ AcceptHandlerHorse.run (ServerSocketAcceptHandler.java:880)
  to com.evermind.util.ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:298)
  at java.lang.Thread.run(Thread.java:595)
  java.lang.NullPointerException
  at oracle.apps.fnd.security.SessionManager.recordSuccess(SessionManager.java:3820)
  at oracle.apps.fnd.security.SessionManager.validateLogin(SessionManager.java:2082)
  at oracle.apps.fnd.security.SessionManager.validateLogin(SessionManager.java:1946)
  at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId (unknown Source)
  at oracle.apps.fnd.framework.CreateIcxSession.createSession (unknown Source)
  at runregion. jspService(_runregion.java:132)
  at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
  at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
  at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
  at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
  at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
  at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
  at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
  at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
  at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
  at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
  at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
  to oracle.oc4j.network.ServerSocketReadHandler$ SafeRunnable.run (ServerSocketReadHandler.java:260)
  at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
  to oracle.oc4j.network.ServerSocketAcceptHandler.access$ 700 (ServerSocketAcceptHandler.java:34)
  to oracle.oc4j.network.ServerSocketAcceptHandler$ AcceptHandlerHorse.run (ServerSocketAcceptHandler.java:880)
  to com.evermind.util.ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:298)
  at java.lang.Thread.run(Thread.java:595)
  
  
  Logout
  
  Copyright (c) 2006, Oracle. All rights reserved.

  Hi all
  There is the problem with the patch newly relased jdeveloper to 12.1. We raised a SR with Oracle and they responded by saying rear: profile "Sign-On: Notification ' to 'No' at a site level, which decided the issue.
  Mukul-

• I get an error loading online in firefox during the loading of webcams, chrome and IE ok

  Vista Windows

  In the details of your Question > more details of the system, I do not see the plugin Flash player listed. You have it turned off because it was causing problems?

  If you don't turn it off intentionally, could check you if you can reactivate on the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. On the right side, look for 'Shockwave Flash' who might be down on a gray background. Assuming that it is not a message that he's blocked, you can replace 'never activate' for "Ask to activate" (to give permission to individual sites when you trust him) or 'always' (to allow all websites use Flash automatically).

  If your Flash needs an update, you can get the version 18.0.0.209 on this page:

  https://www.Adobe.com/products/flashplayer/distribution3.html

  In the first table, find the row corresponding to "browser plugin", and you can use either the EXE or the MSI installer.

  To ensure that the old version is removed, please close the tabs that are using Flash, or quit Firefox, during the update.

  If you HAVE problems with Flash, it is a standard orientation that addresses the most common questions. I'm sure you've seen some of it before, but just in case:

  (1) If you have any recorders/downloaders who interact with Flash media to ensure that they are as up-to-date as possible, or disable them temporarily.

  (2) disable hardware acceleration in Flash: right click on the media in the drive and click on settings, then the first mini tab and uncheck the box to use hardware acceleration

  More information in this article from Adobe technical support: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues

  (3) turn off mode protected (Windows Vista and later)

  The functionality of the safe_mode of the Flash player plugin has security benefits, but there seem to be some compatibility issues on some systems. You can disable it using the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. On the right side, find 'Shockwave Flash' and click on the link for more. Then uncheck the box for "Enable Adobe Flash protected mode" and try it for a day to see if that helps you.

• I try to capture a Web page using the Acrobat "Convert" icon, but this no longer works. I get an error message: "no access to Acrobat WebCapture. Acrobat is posibly busy or waiting for input. »

  I try to capture a Web page using the Acrobat "Convert" icon, but this no longer works. I get an error message: "no access to Acrobat WebCapture. Acrobat is posibly busy or waiting for input. »

  Thanks Abhishek,

  already, this option was unckecked. But miraculously it works now (after spending hours trying...).

  Beste, Geert

• Firefox suddenly do not load multiple web pages correctly

  I got 4 of Firefox since the release date, but today it acting up - is not loading some Web pages correctly, removing all of the formatting and just put all the text/links/etc in a list along the left side of the window. It is also not displayed pictures of all not more, even if they are all hosted on Photobucket. It's literally ther first time there was a problem with it since the update, and I did not change settings on it at all, so I have no idea why he broke up suddenly. Anyone else get this?

  I've looked everywhere for a solution to this problem; uninstalled ff.; reinstalled FF; Restore my computer; etc, etc, and nothing worked until I found this! Thank you very much!

• Laptop does not connect to the internet. error cannot display Web page

  Original title: laptop does not connect to the internet. How can I fix it?

  I'm trying to get my laptop to connect to internet, but it will not. It keeps telling me that it cannot display the Web page. The wireless connection is the link and he sees the laptop, but it's like he goes. How can I fix it? Help!

  Hello

  1. Have you tried using anythird party web browser to connect to Internet?
  2. You use Internet Explorer to surf the Internet?

  If you receive error message cannot display Web page in Internet Explorer, then you can check the link below to fix the problem.

  "Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer

  http://support.Microsoft.com/kb/956196

  Note:

  Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• I can't get Firefox more due to my Web Page to the top of the screen around and unable to free him.

  Recently, when I clicked on Firefox I had 3 bars of tools, then on my web page on the rest of the page. Now when I click on Firefox, I get a white screen then my web page is displayed. If I click on any of the bands, the only way I can clear my screen is turning off my laptop.

  Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Ctrl + Shift + F).

  • https://support.Mozilla.org/KB/how-to-use-full-screen

  If you are in full screen view then hover over with the mouse upward to make the bar appear Navigation and tab bar.
  Click the expand (in the top right Navigation bar) to exit full screen or right-click on an empty space on a toolbar and select "exit full screen" or press the F11 key.

• Loading slow web page and with Airport Extreme connection speeds

  About 5 days ago, I noticed a significant slow down the loading of web pages. In some cases, I see a blank white screen for up to a minute before the page is loaded. In others, the page never loads at all. And sometimes they load very quickly as expected. This happens with my iMac that is connected to a router via ethernet, as well as my Macbook Air connected via Wifi to Airport Extreme.

  I have a high-speed internet connection by cable Comcast/Xfinity: Blast 250Mbps.

  I tried to connect my iMac directly on the model of cable (Arris Surfboard SB6183), and there is no problem. Download speed was 30Mbps 300Mbps and upload.

  Then, I plugged my Airport Extreme router again and connected the iMac to the router via Ethernet. Download speed dropped to 100 Mbps!

  This suggests that the problem may be with the Airport Express. It is not a wireless problem, because as you can see the download speed went from 300Mbp/s connected directly to the model 100 Mbps when connected to the Airport Extreme.

  How do I troubleshoot/fix this?

  One last thing: I did a speed test with my Macbook Air that is connected via Wifi and the Airport Extreme router. Download speed dropped to 35 MB/s.

  Direct connection to the modem is so very fast, suggesting the internet connection Comcast isn't the issue. Speed falls even with ethernet to the Airport Extreme router connection, then decreases even more with the Wifi connection.

• Mac will not load some web pages but works in safe mode

  Hello

  I am trying to solve the following problem...

  MacBook Pro with 10.11.3 will not load some web pages (booking.com people.com are just a few). Browser will not make a difference.

  Looked around the discussions and tried a few remedies but without success. for example, change the dns data, site reset or 8.8.8.8.8 create a new user and I have tried several different networks.

  All the site will load in safe mode.

  Thank you guys!

  If they load in Safe Mode, then it is a third-party plug-in or software blocking sites while not in Safe Mode.

  Do you have the third-party antivirus or firewall? Do you have any unknown third party plugins or extensions?

  Open the Finder, click go > go to folder, copy and paste the following and click on Go

  ~/Library/Internet plug-Ins

  This is where your plug-in user. By default, this folder must be completely empty, so anything here has been added either by you or with 3rd party software that has been installed. You can move anything in this folder on the desktop and then try with your sites. If this works, your choice in their folder one by one until it doesn't. Remove the problem and it redownload only if you really need.

• I get an error loading C: Windows\ifapilidarexowex.dll rundll. How can I solve this problem?

  I have a laptop Gateway running Windows XP Pro. When you connect to any account, I get an error loading C: Windows \ifapilidarexowex.dll rundll. I click on the OK button and the system starts and seems to work fine. It is an annoyance and should be fixed. I don't know how.

  C: Windows\ifapilidarexowex.dll<-- this="" is="" a="" malware="">

  As already mentioned by the first poster, the loading of the module above error is because the point of loading in the registry is still intact and trying to load a file that no longer exist. (A malware dll) file has been deleted either by your resident anti-virus or other scanners, but left intact registry value where the error.

  What needs to be done, is either operate scanners who clean up redundant reg for example, MalwareBytes entries or other scanners or run other tools such as HijacThis and tick the corresponding section of fault start and click on the "Fix checked" button. hijackThis will then remove the redundant value and error loading stops. It is easier to use a tool, so you don't have to worry about editing the registry.
  You could also disable the offending boot entry via msconfig > startup if it shows up there.

  Below is an example of an error in loading a module of malware that has been deleted by the antivirus, but has not removed the corresponding registry value.
  04 entry in the log from hijackthis should look like the example below.

  "Error loading c:\windows\system32\ravkgmff.dll the specified module is not found."

  O4 - HKLM\... \Run: [GPLv3] rundll32.exe "C:\WINDOWS\system32\ravkgmff.dll",realset"

  http://free.antivirus.com/HijackThis/

• As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." How should I do?

  Original title: Rundll error help

  As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." -What it means and how to fix it?

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.