cannot locate any photo on MAC files to load into LIGHTROOM and how to load?

Similar Questions

• Satellite A300 - cannot locate any wireless network

  Hi all

  I just bougth today a Satellite A300, everything works fine except the wireless access. Ethernet access works very well, and the problem is not with my wireless device since it works with my old laptop.

  It cannot locate any wireless network. It does not appear to be activated WLAN and I don't know how to enable it in the BIOS.

  The swicht wireles on the front of the laptop is turned ON, but not the function Fn + F8 appearing at all.

  Can anyone help please?

  What you mean with this WLAN is in the BIOS not enabled? Normally, you can change all BIOS options then try to activate it.
  Also make sure that the WLAN switch is on and active with FN + F8.

  Visit the Toshiba for a driver and the update to the BIOS:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• I recently installed the Flash Player version 14.0, but it cannot locate on my computer (Mac OS x 10.6).

  I recently downloaded and installed the Flash Player version 14.0, but it cannot locate on my computer (Mac OS x 10.6).  The version I can find is Flash Player version 10.2.153.1.  Can you tell me how I can find and verify that the version 14.0 was installed?  When I use the Adobe web site to check what version I am running I'm under version 14.0, but a search of my computer does not display the version 14.0 anywhere on my system.

  Hello

  Version of the Flash Player plugin is installed in the directory/Library/Internet Plug-ins.

  --

  Maria

• Recovery of DNG issue: I have photos stored on an external hard drive which have previously been imported into Lightroom and converted to DNG.  The laptop on which I was running Lightroom died and I had to replace the hard drive and rebuild the

  Recovery of DNG issue: I have photos stored on an external hard drive which have previously been imported into Lightroom and converted to DNG.  The laptop on which I was running Lightroom died and I had to replace the hard drive and rebuild the computer.  In the process of my Lightroom program and catalog related to these images have been lost.  When I re-associate these photos with my new installation of Lightroom and a new catalogue is there a way to retrieve the keywords or other changes or metadata catalogue Mountaga?  Is any of this information embedded with the imge DNG file or was it only in the cataloght lost on my failing hard drive? I re-import just as if it were new images with no prior treatment of Lightroom?

  By default, LR saves all changes in the catalog, and that applies to any type of file.

  Optionally, you can save changes to the file as well, for raw files owners, this will create a xmp file - for DNG that changes are going to be cooked in the file, without additional xmp file.

  But it does not default. Go to the catalog and parameters under the control of metadata automatically save changes to XMP.

  Unless you do this, the changes are saved only in the catalog.

  Hope this makes things clearer.

• Organizer can import any Photos of Mac OS

  Organizer can import Mac iPhoto library. Is it possible to import Photos from Mac library instead?

  Thank you

  Hi Anteric,

  Unfortunately, there is no option to import Images directly from Photos from Mac to the Organizer, you can run the import from Iphoto to the Organizer function.

  We can suggest you select all your images on Mac picture and export them to any folder on your system, from there, you can import in the menu Organizer

  Steps to follow:

  Open Mac OS Photos

  Click Edit in the top menu bar

  Select all

  Click the file menu in the top menu bar

  Export.

  Related link: items Organizer Help | Import media from iPhoto (Mac OS only) library

  Let us know if it helps.

  ~ Mohit

• How to transfer Photos on Mac files to reset iPhone

  The software on my iPhone 5s is corrupted by the employee of the Genius Bar. She suggested I go back to iTunes, and then back up my photos for the Photos on my Mac, then reset the iPhone and set up as a 'new' phone. That would eliminate the corrupted software. My concerns are:

  -How can I get photos of the Photos on my Mac app to my iPhone?

  -How can I copy my "notes" back to the iPhone? It shows that some are saved on my gmail account and others to my AOL account.

  -all my contacts will be copied to the iPhone when I sync with iTunes?

  -What happens to the data in the apps on my iPhone? Record Fiitness, game scores, etc., it is in the apps in iTunes and will be copied to my iPhone without losing any data?

  The Genius Bar employee was able to tell that the system software is corrupted and therefore needs to be reset. Randomly, my phone crashes and restarts.

  Thanks for any help!

  There's an iPhone forum where you need to ask questions of the iPhone

  On Photos for Mac issues easier to migrate the Photos to IOS devices use iCloud photo library- iCloud Photo library FAQ - Apple support - it is constant and totally automatic and all changes made to any device (additions, deletions, or modifications) are made on all devices

  LN

• Cannot locate the Excel 2007 spreadsheet files after uninstalling Firefox

  Trying to open spreadsheets with Explorer that were registered with Firefox as browser. Are worksheets related to the browser? If this is the case, I plead ignorance. Is there anyway to recover? I am a bit technologically challenged then you please answer in layman's language. I reinstalled Firefox but no cigar. TKS so much! Hope this makes sense...

  Hello dflhoo, you are sure that you have downloaded and opened not only spreadsheets directly with excel (in the latter case that they downloaded to a temporary location where they are deleted after a one-time-use)?

  downloaded files normally are not related to your browser - they will always be accessible without any problems after you have uninstalled or switched browsers and are found at the place where you downloaded the original to (in default firefox, the download in your user folder folder), the file system

• Edit raw photos to mac files

  I use a Fuji X - T10. Raw files are currently supported by OS X. When I download the pictures, I don't seem to be able to edit raw files. 'Use RAW original title' menu option is grayed out. Can someone explain how to use Photos to directly modify the raw file? Thank you!

  'Use RAW original title' menu option is grayed out. Can someone explain how to use Photos to directly modify the raw file?

  This option is only available, if you are in edit mode. Then, it will be activated in the picture menu, but only for RAW and JPEG pairs.

  If you have imported only RAW files, the RAW file is already the original and will be used, when you edit a photo.

  I'm not sure what you want to achieve.  Photos do not edit the original RAW file. The original will still be retained unchanged. Photos will open the RAW file, apply adjustments to the image and then create a preview. You can export the photo retouched in many formats, but not as an edited RAW file; export the photos edited in TIFF high quality, or in the form of JPEG file.

  

• Keep the dng or CR2 files when switching from Lightroom and Photoshop.

  From Lightroom and Photoshop, how can I keep the dng or CR2 files. Now it changes the psd and when I return to Lightroom it removes options in the section of Calibration of the camera, so that while I have a choice (Adobe Standard/camera faithful), after returning from Photoshop file I have "Embedded." How can I keep the dng or CR2 files

  Adding to the good advice of Alfred - a raw file cannot be registered as the other files.

  Its only use is the basis for the creation of new files, which must be regular files, such as tiff, psd or jpg.

  When you edit a raw file in Lightroom, it does not change the file, the changes are written to the catalog.

  Optionally, save the changes in the form of metadata (xmp) sidecar files, or in the case of DNG in the file itself.

• Cannot install any photo editing software on windows 7

  I tried to install the 3 programs editing different photo on my computer. was'nt able to install a

  Could list you the name of the photo editing software?

  See the developers website for compatibility with Windows 7 and if there are updates, corrections or difficulties that might ensure compatibility.

  Windows 7 Compatibility Center

  Check if your application software or hardware is on the list

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Software:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=software

  You can also try to run the program in compatibility mode

  You can find more information on compatibility modes in the articles below:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-question

• I iput a dvd rw drive in my computer, formatted and cannot locate the contents of the dvd anywhere on the computer and the drive seems to have been deleted.

  I put a dvd rw drive in my computer to play music from the disk, formatted and cannot find the content of the dvd anywhere on the computer.  I accidentally delete the dvd?  When put the DVD back in my camcorder it's empty!

  A DVD RW Formatting erases it.

• cannot open any what with adobe flash have charged 15 times and it opens no whatever can not open all downloads since the start outlook

  I received my Bill electric co. in a pdf document that says you need Adobe 9.2 or better I have adobe XI but he just continues to say to dwnlde, I have at least 15 times and it won't work you had a good program and you blew it.

  Note that Adobe Flash and Adobe Reader are two different programs.
   
  Adobe Reader has been problematic for years. I suggest you download this PDF reader and see if it works.
   
   
  Foxit Reader
  http://www.foxitsoftware.com/Secure_PDF_Reader/
   
   
  If the attachment try opening with Adobe, save it first and then create an association.
   
   
  1. download and save the attachment to the office.
  2. right click on the saved file.
  3. Select: Open with on the shortcut menu.
  4. click on: choose [default] program.
  5. Select: Foxit Reader.
  6. check: always use the selected program to open this type of file.
  7. click on OK.
   
   
  
   
   

• Cannot open any link on safari, I'm looking for something, and when I click on it, don t do anything about it either, if I press 2 times safari are blocked

  Nothing happened after that I pressed this link, safari does not open or charge.

  You can open pages in Safari when connected to a Wi - Fi network?

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again?

  You won't lose data by doing this, but it can cure some problems after installing new software.

  If that doesn't work, reset network settings in settings/general/reset would be a new step to try.

  Restrictions put in place in settings/general/restrictions?

  If still no luck, set it back to factory settings and restore from last backup:

  Use iTunes to restore your device to factory settings - Support Apple iOS

• file rundll32 a doesn't and how closed I repair__

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: help

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  There is a chance that this error is linked malware so next message will tell you how to check carefully
  because only if necessary.

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  -----------------------------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------

  If no joy trying to determine what is the cause:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Elements 8: why my files open at 72 dpi and how can I change it?

  My files all open them at 72 dpi, which causes important problems of resizing. How can I change this?

  It shouldn't cause any problems at all. When you take a picture, your camera doesn't know anything ppi; It includes only the dimensions of the pixels. PPI is unimportant, until you are ready to print. When you want to the top of the ppi, just go toImage > resize > Image size and change what you want to with resampling turned off.

  Some manufacturers to put a frame of reference for the ppi in the exif data for the image - canon uses for example, 180 for some of their devices, but if there is nothing that PSE can understand, use 72 dpi by default. It is not really important. What is important is that you have enough pixels in the photo. Do not turn the resampling and you will keep the same number of pixels when you up the resolution, so you will get a good impression.