Cannot modify ' simultaneous: URL Lifetime' profile option at the user level

Similar Questions

• Cannot modify only directory attributes of reading, all the readers all the directories.

  Original title: cannot modify only directory attributes of reading, all the readers all the direcotries.

  For some reason now all directories are read-only. I have a check only reading tab, it goes through the process of change in all files in the subdirectory (I put their scrolling), click ok. But when I go in the directory again that reading is only check again. It is on my C: dirve all directories and all the other readers, including empty directories. Any suggestion would be appreciated. Thank you
  Bit defender shows no problem.
  SdS49r

  Hi SdS49r,

  I would like to ask you a few questions to better understand:

  (a) you connected to the administrator account? because you do not have the \n(Assurez-vous if you are not in the administrator account

  (b) don't you make changes on the computer?

  (c) have you created the file read-only?

  (d) what message do you get while changing the read-only attribute?

  (e) have you been able to change the attributes previously in your computer?

  You can scan your computer, then follow the steps in the link: http://www.microsoft.com/Security_Essentials/

  Try the system restore, it restores the computer to its point earlier while it was working fine.

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  
  Hope this information helped!

  Thank you, and in what concerns:

  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• I have a corrupt user profile. Windows XP. When I add a new can be the same, or should be different. And the user's profile should match the user ID?

  Corrupted user profile

  I have a corrupt user profile.  Windows XP. When I add a new can be the same, or should be different.  And the user's profile should match the user ID?

  If the profile has recently become corrupted, you can probably get the same user by performing a system restore operation:

  "Windows XP problems if your profile is corrupted"
    <>http://support.Microsoft.com/kb/326688 >

  Otherwise, you will need to create another user and copy your data.  The simplest procedure is here:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  HTH,
  JW

• How to hide a menu option unless the user is connected to a specific area of Secure

  Is it possible to hide a menu option and it display only if a user is logged into a secure area?

  I know that I can add pages to secure areas so that no one can navigate to this page unless the information is recorded in the secure area, but I also want to show a menu in the main menu option, if the user is connected to a secure area.

  Perhaps I could address the issue with CSS to hide the menu option and show only if {module_isloggedin} but it would mean that any user who is connected to any secure area would then see this menu option.

  Is it possible to do?

  Hi David,

  The traditional way was to use JS and CSS in combination with the module_subscriptions module which is a bit tricky, more information on the module here:

  {module_subscriptions} | Developers of business catalyst

  However, now with the liquid that is much easier and safer (as is the side Server). Using the same output of module in liquid form in the collection:

  {module_subscriptions} | Developers of business catalyst

• User profile Service failed: the user profile Service service has no logon. User profile cannot be loaded

  I have another computer.   I turned it on and when I typed my windows password, I received the following message: the user profile service service has no logon.  User profile cannot be loaded. Service user profile Service has no logon.  User profile cannot be loaded.  I use Windows 7 Professional.  I don't have a password reset disk.  How can I get?

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• The user profile Service and the user profile cannot be loaded

  My Windows Vista has just received an automatic update online.  Now I can login to my administrator account more.  I get two error messages) 1 the user profile Service does not logon and the user profile 2) cannot be loaded.

  I can sign in as a guest, but I don't see any of my documents and files as they are accessible only when I log in under my logon administrator... Help

  Try this:

  http://support.Microsoft.com/kb/947215

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• How to write graph of waveform data to text file with the option to the user to do

  So, I'm new to labview and will have bad to write a program in particular.  I have a waveform graph that runs for 120 seconds, generating a sine curve.  I am, however, having a time difficult get the program to write the x and are coordinated in a text file.  I've attached what I have so far.

  The first task I was assigned was to write a program that creates a curve of snusoidal on the front panel by adding a data point every half second for 120 seconds.  The plot should starts only if the user presses a button to start.

  The next part is to give the user an option to write the data generated in a file of worksheet called 'sine.txt '.  The file name and location should be hard-coded.  The file must contain the x and there contact information of each data point in columns separated by tabs, also known as the delimited.

  I spent several hours refining the attached program, and I can't seem to make it work right.  Any suggestions would be helpful at this stage.

  Sincerely,

  A student of chemistry frustrated whose research mentor is out of town

  First, you create files Excel.  You create text files.  And it seems that your writing on a file already created X (time) vs Y (curve of data) that is delimited by tabs.

  All you do is simply too complicated or a Rube Goldberg.

  All you need is the joint.

• Hide a metadata profile based on the user role.

  Hi all

  I need to hide a metadata profile (log, update) based on the user role page. I have added metadata to a rule like "change" and added the rule to the profile. Now I want the metadata submitted must be visible for couple of user roles (admin, contributor) and it should be hidden for other user roles. How to achieve this?

  The content Server: 11.1.1.8

  Thank you

  Maury

  (1) create a rule that allows you to hide the metadata for all roles

  (2) create a new one which will show use the condition of activation of rule with building userHasRole("contributor")

• Something wrong with the profile of all the users of the IOM

  Hi all
  
  I don't know what is happening but everytime I login with a user id and password of the IOM and click on the profile of the user in the Console of the Self Service, I get this error thrown:
  
  java.lang.NullPointerException
  
  on the user interface. Also, in the diagnostic server logs, this is the entry:
  
  [2012 07-26 T 12: 16:47.989 + 05:30] [oim_server1] [NOTIFICATION] [IAM-0060016] [oracle.iam.platform.auth.impl] [tid: [ASSETS].] [ExecuteThread: '3' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: xelsysadm] [APP: IOM #11.1.1.3.0] the IP address from which flows the browser is 10.76.227.130
  [2012 07-26 T 12: 16:48.317 + 05:30] [oim_server1] [WARNING] [] [oracle.iam.consoles.faces.mvc.common] [tid: [ASSETS].] [ExecuteThread: '3' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: xelsysadm] [APP: #11.1.1.3.0 IOM] java.lang.NullPointerException
  [2012 07-26 T 12: 16:48.317 + 05:30] [oim_server1] [ERROR] [] [oracle.iam.consoles.faces.mvc.common] [tid: [ASSETS].] [ExecuteThread: '3' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: xelsysadm] [APP: IOM #11.1.1.3.0]
  
  
  This happens for all users. Same xelsysadm. Please help me solve this problem. Its quite urgent. There, it is not concrete and specific error shown in newspapers, so I'm totally confused. And this error started happening after I changed some attributes through the administration and then mapped these attributes to RequestDataSet through MDS. However, these pages work fine. Perhaps the profile has still some attribute that I deleted in the administration page, or something. I'm not sure. Impossible to find any specific set of data for the profile in the MDS. I only demand, create user, alter user and these other sets of data. If someone knows what page of profile uses the data set, then please reply. Any help is very appreciated.
  
  Thank you
  $id

  Did you change the visibility of the user usr_locale attribute? Normally it is visible, but if you removed the visibility of this attribute in your configuration of user attribute you will get this error.

• Cannot install a new font - my options on the screen do not match Windows online instructions

  I want to install a new font. I need to use it-"Dancing #215dcc '-for my posts in Word and Email marketing.

  I don't see the option to file or install a new font. When I go through the control panel.  I only see icons for existing policies but no way to add a new font.

  I tried to click on Windows Explorer, but who has not added to my options.

  Windows 7 service pack 1

  Help, please.

  Hello

  To install a font under Windows 7: download the file of police on the desktop, right-click
  the font file and click on install.

  Concerning

• Cannot modify PDF even if I paid for the subscription to do.

  I am connected to my paid subscription to Adobe Acrobat Pro DC. However, when I try to edit a PDF file (open from Dropbox) I am always prompted to purchase the package.  When I followed the instructions for 'More' and 'Subscribe now', the window adobe recognizes that I am already connected.

  Yet I am denied access to my PDF editing.  What I'm missing here?

  micheallh wrote:

  Yet I am denied access to my PDF editing.  What I'm missing here?

  Once you sign up and pay, you must download and install Adobe Acrobat Pro. Looks like you open your pdf files into the free Reader still.

• No option in the user account dialog box to add administrator to my account

  I have only 1 currently on my computer and I want to say to have administrator privileges.  I use Windows XP Home Edition SP3

  Hello
   
   
  1. have you had any administrator account on your computer before?
   
   
  Method 1.
  If you have an administrator account on your computer before, then you can perform a system restore and go back to this account.
   
  Reference:
  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084
   
   
  Method 2.
  If the problem persists I you recommend to start on the administrator account via safe mode and then change the type of account for your administrator account.
  Reference:
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Advanced options in the user interface

  Hello!

  I would like to change the values in the options in advance (for example. Disk.PathEvalTime) but I'm quite a beginner in this kind of things, so if someone could post some interesting links to do this I would be more than happy.

  Thank you

  in the esx/esxi, go to the Setup menu > in the left pane, you can see the software section > click Advanced settings

  

  There you can change,

  NOTE - VMware does not recommend to change these values.

• How to give the option to the user to select the measures of temperature or voltage with NEITHER cDAQ-9178

  Hello. I wrote two programs for the NOR cDAQ-9178 that work perfectly, but now I would like to combine... and users the ability to perform a measurement of the temperature (module NI 9214) or a measure of tension (NI 9201 module). I tried to use an Enum to a case Structure control, where the

  user can choose either 'Measure the temperature', or 'Measure the tension', but during execution of the program, only the before user input panel opens and the program stops. Could someone please look at the code below and give me advice on the placement of my two programs in a structure of case? Each program contains two screws... a Subvi user input and a measure vi. Is it possible for me to drag the temperature and tension screw in the structure of matter? Thank you.

  FYI - I am reposting this, because I couldn't get tethering to work on my previous post

  I found my solution. I had to right click on the Subvi vi... 'Subvi node Setup' and select set the front panel

• Profile picture of the user account on the desktop computer?

  My Windows user account image appears on my desktop Windows 7 64 bit. Anyone know why or how to do stop?

  Thank you.

  (I don't know that if it comes to the good Windows themes box, either, so it must be moved, if not move.)

  I think I knew what was causing it. I had "Show hidden files and folders" checked while I was trying to do something and I forgot to uncheck it when I was. I've unchecked and he went.