Cannot move from a start page

My father has a toshiba laptop with windows vista.  It normally stops the other night and tried to turn it on today.  It goes directly to the page that gives options to start windows normally, boot go ├a the previous configuration that worked etc etc.  He took every option and every time that he is turning a bit and then the same screen comes up again.  Whenever he gives a countdown from 30 seconds and if you let the timer run out the screen goes black and you can hear the computer running, but he returned to the same boot screen again.  Is there a way around this problem.  Would it be useful to put in disk systems at this stage, or which would cause more problems?

I would be grateful for any suggestions!

http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

We do not know what type of disc you have.

It may be a straight line on Recovery DVD factory settings.

You should ask Toshiba on the disk, what is and what it does.
Click on the link above.

If it's a recovery disk and you start from it, it can give you Options to tell you that he's going to do: repair or reinstall.

Try this:

If you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

Download the ISO on the link provided and make a record of repair time it starts.

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

When you have changed that, insert the Bootable disk you did in the drive and reboot.

http://www.bleepingcomputer.com/tutorials/tutorial148.html

Link above shows what the process looks like and a manual, it load the repair options.

NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

Read all the info on the website on how to create and use it.

http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

It's a very good Vista startup repair disk.

You can do a system restart tool, system, etc it restore.

It is NOT a disc of resettlement.

And the 32-bit is what normally comes on a computer, unless 64-bit.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • How to remove movies from the summary page

    With the help of iTunes version 12.4.  Can anyone help in my attempts to remove movies at home summary page in iTunes?  I was able to remove movies from my iPhone and iPad and unchecked on the summary in the movies tab page.  However, films controlled and deleted still appear in the section summary of movies.  Cannot find a delete any action to remove unwanted movies.  This has to do with the deletion in iTunes itself on a Windows version 10.

    Steve

    FOUND THE ANSWER!  From a previous post-, I had the same problem. You cannot remove them from the summary page. Cannot you.

    In the app iTunes on Mac or PC, without your phone, from the drop-down menu at the top left - select movies and then click on, select, Home Videos. In the next screen, select the home theater and right click. This will allow you to remove. Once you reconnect your phone and sync, the cinema will be gone from your Summary Page!

    Steve

  • Cannot open the Firefox start page.

    Original title: network programs network networking Internet Web site Site Web Web Site URL

    I couldn't open the start page of the Fire Fox. relatively, I could not access for all from a single, as new brands or a book.

    Hi Masami,

    1. is the issue limited to Firefox?

    2. you receive messages or error codes?

    3. have you made a recent software or hardware changes to the system?

    If you are facing the issue only with Mozilla Firefox, you must contact Firefox for additional assistance.

    Support for Firefox

    Hope the helps of information.

    Let us know if you need help with Windows related issues. We will be happy to help you.

  • Cannot browse the internet from the start page. Used to be OK, not now?

    Nothing happens on this search page. It used to work fine until about a week ago

    Nothing happens.

    a your firefox profile reset everything works?

  • cannot connect on the start page, as the owner.

    computer froze on the star page. cannot connect as an owner.

    Hi mycasmas,

    1. don't you make changes before the show?
    2. the problem persists with other users accounts?

    Step 1: We recommend that you check if the problem persists in safe mode
    a. see Description of the Mode of course in Windows XP startup options
    b. in the menu advanced startup options select Safe mode and press on enter.
    c. connect to your user account.

    Step 2: If the problem does not persist in safe mode, check if a non-Microsoft program is causing the problem
    see How to configure Windows XP to start in a "clean boot" State .
    b. in the article, follow the method 1 and method 2 to find out if any program is causing the problem.
    c. Once you have found the culprit that is the program that is causing the problem, then uninstall it.

    Note: Article, remember to follow 'steps to configure Windows to use a Normal startup state. "

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Cannot print from desktop computer, page test continually prints up to no more than paper in the printer. Printer will print from laptop (wireless).

    The office recently repaired under warranty. (Windows 7). Cannot send anything to print successfully. Uninstalled the printer.  Installed using disc. Followed the instructions to print a test page. This printed and kept. Printer disconnected. Tried to print a coupon. Impression went immediately to the non-stop test page printing. How can I stop the test page (button stop/clear on ineffective printer) printer works with my laptop (wireless).

    Hello

    Were there any changes made to the computer before the show?

    Please follow the steps from the link and check that it works very well.

    See the link.

    Solve printer problems

    http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    For all windows questions do not hesitate to contact us and we will be happy to help you.

  • When I start my computer my icon account disappeared from the start page, so I can´t access my account

    2 other icons of account are there, but I still have can´t access my normal account

    Hey Mikkel A.Larsen,

    1. did you of recent changes on the computer?

    2 when was the last time it was working fine?

    Method 1

    Check and make sure that your user account is not disabled on the computer.

    You will need to connect to an administrator account and try the procedure below.

    one) to open computer management, click Startand then click Control Panel. Click Administrative Tools, and then double-click computer management.

    (b) in the left pane, click local users and groups.

    (c) on the right pane, click users.

    (d) click on your username and make sure the box account is disabled is not checked.

    To disable or enable a user account

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/lsm_disable_or_enable.mspx?mfr=true

    Method 2

    Check if the problem persists in safe mode.

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    Method 3

    If the previous step fails, then I suggest that you perform the restore of the system on the computer and check if it helps.

    How to restore Windows XP to a previous state

    http://support.Microsoft.com/kb/306084

  • Cannot move from a fill and stroke.

    Here's the problem: I'm on an iMac, new, using illustrator CS5. After a few years of use CS3. In CS5, if I draw a shape, flat, in the illustration, and then try to give him an overview, or change the outline or no matter what with the outline, I can't. If I click on the shape tools in the Toolbox and the draw on an oval, for example, I can pass between the outline and filling without any problem. Select form, go to the Toolbox, select the curved arrow to switch from one to the other. That's all. But if I draw a freehand shape, then try it, I can't do it. IT IS A BIG CHANGE FROM PREVIOUS VERSIONS OF THE APP TO GET IT? What is the problem? If it's something I did, fine, tell me and I'll fix. I tried to call Adobe support in Bangalore, and it took 30 minutes just to get the problem well appreciated by technicians. They could not just get the idea for half an hour! I had to go on it 4 or 5 times. And they could not find an answer. they were no help. I hope that the forum will give better results. It's pathetic, guys. Your 90 days tech support is a piece of crap, worthless guys. The only support we have is this wrestling forum. I've been using Illustrator since 1987, (illustrator 88), believe it or not, it's true. And I've always been able to get technical support for cure. No more. Is it how Adobe plans to offer technical support? If there was a way to contact Support technique by going around Bangalore from Adobe, Adobe I would use it. But, alas, I'm stuck with it.

    Did you use the pull down menu (small triangle in the upper-right) in the color Panel and check the color space that is checked. It says probably grayscale and you want to change it to CMYK.

  • When I connect to the start page of mozilla, I can't go to any other sites Web - get "unable to connect to the server", but I'm still able to access the internet through Internet Explorer on the same computer.

    Cannot move to the start page of Mozilla. Any site or search I run, I get a message that Mozilla can not establish a connection with the server.

    See this support article - difficulty of problems connecting to websites after Firefox update

  • Windows XP will not move past the first page (Page in XP) when you try to start the system.

    System worked normally but very slow.  Tried to start today and cannot move from one Windows XP page.  It seems that it tries to start but dones does not advance.  I installed Windows Explorer 8 yesterday.  System starts in safe mode.

    In Safe Mode, what is the error reports can you see in the event viewer for a startup in normal mode?

    Take a look in the system and the Application records in Event Viewer for
    Errors and warnings and copies of post here. Don't post any more than 48
    Twitter.com.

    You can access event viewer by selecting Start, Control Panel,
    Administration tools, and Event Viewer. When the search for meaning
    error, event, Source ID, and Description information
    are important.

    A tip for posting copies of error reports! Run the event and double observer
    Click on the error you want to copy. In the window that appears is a
    button resembling two pages. Click on the button and close event
    Viewer.Now start your message (email) and do a paste into the body of
    the message. Make sure that it is the first dough right out of
    Event Viewer.

    Hope this helps, Gerry Cornell

  • How to open file extension "apreff-ms" If you cannot download from Apps Store?

    Hi, I have a surface and need to open a "apreff-ms" file extension, on applications, it is not software to open this and the surface do not allow me to download anything outside of the app store.

    Could someone help me?

    Thank you.

    Sonia Maricato

    Hello SoniaMaricato |

    Where do you see the .appref-ms extension? You try to install a program?

    From the Start Page, type in the Panel. In the left pane, click Control Panel to open.
    Click default programs. Then click "associate a file type or Protocol with a specific program.

    You see a list of file type, .appref-ms? I stated it in my Windows 8. The description is the ClickOnce Application. The default to open this type of file is a click once Application Deployment Support Library.

    If please reply back and let us know your answers.

    Thank you

    Marilyn

  • DW 8 Start Page - Home Spa - slow

    OK, WARNING: I'm completely new to DW and using version 8, just learning, new to this forum, and no idea why simply create a site locally and then add a page (from the Starter page, unchanged) is a problem. When I navigate to the start page (IE 7) or save it and go to the view... that it is very slow. Slow, as... a mouse on a link and wait 10 seconds for the hover to highlight... this kind of slow. I tried a different start page and it worked ok... but the spa page has the style that I want to use in a site that I need to prototype. .. .and I can't simply ignore it is to say as a platform for navigation if cela question.

    Must be something extremely obvious I missed. Ignorance is not happiness.

    Apparently, the problem is my particular browser of IE (settings). The Web site performs well with IE on several other machines and works well with Safari on my desk. I do not know what settings of IE is the cause, this isn't a question of Dreamweaver.

    ... Thank you for your answer to my question.

  • Cannot remove a program from the start menu icon

    Original title: icons in the Start Menu;. Cannot delete the program start menu icon to remove/uninstall, need help?

    S pie Menu icons; Ghost of icons

    I deleted a program and uninstalled completely, but the program icon always appears in the start menu.  I was not able to remove the icon. Right-clicking on the icon simply freezes the start menu for several minutes. I was able to remove from the desktop.

    I tried the Program Data > Microsoft > Windows > Start Menu > programs > but the icon.

    I had this problem before, but I just do not remember how I fixed it. Any help would be appreciated.

    Hi Kevin, thanks for responding.

    The program was the Vuze, and I managed to get rid of the icon.  By a right click and do not move the mouse and wait 5 minutes eventualy box popped up and I was able to remove the icon from the start menu.

    The solution was a lot of patience.

    Please help us well!

    :)

    p.s. I ran various software cleaning, like glary utilities, ccleaner and reboot several times.

  • This start page comes from Firefox? (see screenshot)

    This is a legitimate Firefox start page? I've been doing this for days when I open Firefox. He returned to the standard page when I update. I need to know if it comes from Mozilla.

    Hello bits339, this is just an excerpt interactive integrated favouring the gaming capabilities of the browser, which airs for 1-2 weeks.

    https://blog.Mozilla.org/blog/2014/10/14/play-awesome-indie-games-directly-in-Firefox-including-the-award-winning-FTL/

  • Cannot move images from album to album dif

    Impossible to return some photos of 1 album to another

    What specific album?

    Were the photos taken by or stored or were they synced to the device?

    You cannot move/delete photos that have been synchronized to the device

    If they were taken by or saved in the device (attachment) if yo remove and then the film, they will be deleted from the other albums, you copied them.

Maybe you are looking for

  • General problem with Satellite A100-491

    I have a laptop Satellite A100-491 and also the Toshiba Windows Vista HP Express installed update. It worked without any problems for half a year. Now whenever it starts, an error fatal system occurs and I tried to repair Windows, to re - install and

  • Problem with recovery partition

    I have HP DV6 6051ea laptop, my problem is when I try to recover my OS (win7 Home Premium) provided that the factory by the recovery partition, it says use created recovery disc. I created them but I really ned to use the partiton to recover OS not D

  • E250 stucks at "image main writing.

    Hey,. as a first step please don't mind my English, I'm German. Ive had my e250 player runs without major problems (well okay, ring of death last year, but was able to fix it), but 3 days ago, he said all of a sudden while listening to the music, tha

  • Microsoft Wireless Natural Multimedia Keyboard, special keys on top of the keyboard do nothing

    Hello I use Vista 64 bit and am having a problem with my Microsoft Wireless Natural Multimedia keyboard.  I use a port USB to ps/2 adapter for keyboard can work in my Dell which has usb inputs.  I downloaded and installed ITP64Eng6.30.191.0.exe Web s

  • ordered a pavilion with graphics card upgrade, upgrade used only 16-bit location

    ordered a pavilion with graphics card upgrade, upgrade used only 16-bit location. I want to connect a second monitor, can I use the parent connections card currently have coverage through them that say "do not remove"?