Cannot open my dynamics on my computer. the application is not compatible.
Cannot open my dynamics on my computer. the application is not compatible.
This is a forum intended for consumers. You're more likely to get help from the Microsoft Dynamics community.
Start here--> https://mbs.microsoft.com/customersource/Global/RMSPOS/support
When you ask one of the forums, you have to mention what happened to your system, shortly before the problem started.
Tags: Windows
Similar Questions
-
Cannot open any office files or icons, the Panel even not. Help!
Hello
I really need help desperately. I can't open any office files or icons. I restored to the point the closest that I can, but no difference. Cannot open the Panel even from the Start button. My compuetr crashes every time I double-click or right-click on the icon 'My Computer' or 'My Documents '.
My restore CD that was shipped with the Toshiba Satellite 1800 does not work either. Help, please! I'm really desperate!
JessWhat do you think average with "I tried with the restore CD but nothing '? Have you tried to completely format your HARD drive? I had a similar problem, but in my case it was because of the transplant of BONE... so I reinstalled the system from the beginning and it was ok.
If you can not solve this problem with the cd supplied by the factory... I think it might be a hardware problem, probably due to the HARD drive. Your HARD drive makes strange noises, like "Click - Clack"?Good bye
-
We have microsoft vista and cannot logon - received messages saying the password is not correct Admin and the other account.
http://support.Microsoft.com/default.aspx/KB/189126
"Microsoft's strategy concerning lost or forgotten passwords"
Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. Mick Murphy - Microsoft partner
-
Cannot open a session in analytics if the user is not mapped to the BIAdministrators group
Hello
I created a new user, lets say 'abc '.
The issue I'm facing is: for the 'abc' user, I traced only groups 'Author BI' and 'BI consumer' as I forced her to test the SPR where I didn't that correspond to the BIAdministrators group.
With the above user, if I try to log in analytics, I get the below error message:
An error occurred during authentication. Try again later or contact your system administrator.
When I added BIAdministrators group through the console of the 'abc' user, I am able to connect successfully.
Is the same for all users by default those too - weblogic etc.
But when I tried the same steps (not to add BIAdministrators group to a user) in the system of my colleague, its working fine.
Could someone help me with this problem.
I also checked privileges section to manage both the system and there seems to be no change.
Thank you
Srikanth.
I found the answer on my own. It seems that the role of the authenticated user is not having access to the object.
Therefore, open the RPD-> right click-> properties-> change permissions for the authenticated user to read field
Deploy the RPD now.
Problem solved.
-
icons are not normal, downloaded progam icons do not show up on desktop, errors of all kinds of files, cannot load down internet Explorer.
Thank you
icons are not normal, downloaded progam icons do not show up on desktop, errors of all kinds of files, cannot load down internet Explorer.
Thank you
Rebuild your icon cache. It could be damaged
http://www.Vistax64.com/tutorials/117229-icon-cache-rebuild.html use an easier Option.
For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
I just installed windows 7 and cannot open powerpoint. Message says that my anti virus blocking. I tried to update (AVG) but the computer indicates that the driver is not compatible
How your problem is related to Windows Update (compared to the Windows upgrade)?
You posted your question in the AVG Free Forum? -Online http://forums.avg.com/
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft -
Please help me!
I have HP Windows Vista Home Basic 32-bit. Cannot open .exe files. I get the error message by side configuration is incorrect. In the event log, it says error in manifest or policy file as a component version required by the application in conflict with one another component version already active. The two components are: c: Program Files\Viewer\Microsoft.VC80.CRT.MANIFEST.
Problems arise when I deleted some files (don't remember which) I am now myself for kicks. Then I completely restored my system with a restore cd, upgrading to vista, downloaded all the updates and everything else works fine only problem is the opening of .exe files. Can someone please help? I'm no computer wiz only right following the indications :)
Thank you.
Hello
Follow these methods and see if the problem still occurs.
Method 1:
Scan an System File Checker (SFC) on your computer and see if that fixes the problem.
Method 2:
Test the issue in a clean boot State.
Note: follow step 7 to your computer as usual.
Method 3:
Follow the steps in this link as well.
-
Cannot open new tab by going to the file/new tab (or CTRL + T or by clicking on the new field of the tab). One is to right-click on a link and choose open in a new tab.
I found that the ASK toolbar is the culprit. I have no recollection of ever install Ask and wanted not just her in any case. Withdrawal fixed the problem.
-
My iCloud and shared calendars has stopped working in MS Outlook today. They worked yesterday. Now, I get the error message "cannot open this series of records. The information store cannot be opened? I tried the fix standard support.
Same thing here. Looks like Windows did an automatic update during the night, and now nothing iCloud associated work (calendars, contacts, etc.)
I also noticed that the error message: "could not load file or Assembly ' MOM." Implementation ' or one of its dependencies. The system cannot find the specified file. "It started after restarting the Windows Update as well. I imagine that the two are related in the same problem to iCloud.
-
Hello!
I installed Win Live Movie Maker, but when I tried to open my .mswmm file I only got this message: "sorry, Move Maker cannot open this project file. The file is not compatible with Windows Live Movie Maker or damaged. Please select a different project file. "The file will open correctly in Windows Live Movie Maker 7, so everything should be OK. What I am doing wrong?Hello
This is supported in Windows Live movie maker file type.
For any request or problems related to Windows Live Movie maker, please post to the Windows Live Help forum.
Here is the link: http://www.windowslivehelp.com/product.aspx?productid=5
Diana
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I have 4 virtual servers running on a host ESX 4. 3. run OK but 1 gives the following error when you choose works in Vsphere client.
Cannot open disk ' * hard ' or one of the snapshot disks it depends on. Reason: One of the parameters is not valid.
I have attached the log file and the list of files in the folder of servers.
Any help much appreciated.
Welcome to the community,
This virtual machine successfully powered on since July 23?
To me, it seems that something went wrong with the clichés (I guess they are / were created by a backup application). Due to the size of the files I guess more that snapshots were created and not modified.
If this is the case, you can delete the virtual machine to inventory, edit the vmx file by
replacement of
scsi0:1.filename = LHMU-VIC04_1 - 000004.vmdk
with
scsi0:1.filename = LHMU - VIC04_1.vmdk
then right-click on the vmx file in browser data store and add it to the inventory.
Before adding it to the inventory, delete the snapshot vmdk files (those with '00000 x' in their file names) as well as the vmsd file. BTW, you can also remove the zdump file if you want.
If you are not sure if snapshots contain valid data, take a look at the (small) header files vmdk. If the CID and the parentCID match, snapshots were created while the virtual machine has been powered down.
If you are not sure, please post back before doing anything.
André
-
Original title:
Everything was fine until yesterday. Juice now, when I plugged the external HD into the USB port it does not appear in the 'my computer' window. It is recognized by the computer as it is present on the list of the "Disk Clean Up" and it also appears when I click on ' Safe Remove Hardware ' on the taskbar. But if she does not appear in the 'my computer' window I can't work with it or don't even know what it I have arquived in it.
Trying to find a solution, I realized that same 'information system' to 'System tools' is also not available. Pops up a window saying that "Windows cannot open help and Support because a system service is not ongoing enforcement. " To resolve this problem, start the service named help and Support '. OK, I tried to open 'Help and Support' ' Start Menu ' and the same window appeared again to "not have a system service that runs". I don't know what her soul precisely and I have not the slightest idea of what I need to do to correct this 'disappearance' of Service 'system '. There is nothing without the appearance of HD in the window of thw work? Everything else works fine and the calculation is virus-free. What should I do?
Hello
You did changes to the computer, before the show?
Solution A:
For the problem with the external drive not appearing is not in Windows Explorer, see the following methods.
Method 1:
Check out the following link.
A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive
http://support.Microsoft.com/kb/925196
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 how to back up and restore the registry in Windows
Method 2:
Connect the external hard drive on another USB port and check.
Solution B:
For the problem with the help and Support, check if the service is enabled.
a. click Start, click run. In the Open box, type services.msc and press ENTER.
b. right-click on the service called Help and Support , and then select Properties.
c. under the general tab, set the type Startup to Automatic and click Start.
d. close the services window and check for the issue.
-
Original title: Intervoip and skpye does not work on my computer. When I open the PC screen, cannot start the base engine, the application can not continue. How I have this problem?
My Intervoip and skpye does not work on my computer. When I opened the PC screens, failed to start the base engine, the application can not continue. How I have this problem?
Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"? Perform, even if your user name is an administrator.
Try right click on the actual Setup.exe and choosing the option "Run As Administrator"? Perform, even if your user name is an administrator.
Two applications load mode safe mode with setting in network or a clean boot?
Startup options (including safe mode)
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-modeHow to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/default.aspx/KB/929135If you test with another Windows user, have the same problem?
Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking. First try checking not be (read-only) to see if it reports any problems file or hard drive. If this is the case, start by checking the two boxes, in no other rerun.
-
Windows cannot open help and support because a system service is not ongoing enforcement. to resolve this problem, start the service called help and support
lhthomas,
Welcome to the Microsoft Answers community.
In doing research, I found this article in which people have found a solution:
Help and support-Service not started
I hope this helps.
Lisa
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Origianl title: windows live does not open
My Windows Live Mail has recently stopped working, by double-clicking on the desktop icon top of page does not open the program, appears it the "Windows Live Mail" logo and then a message saying:-"Windows Live Mail could not be started. The application could not open the Windows Live Mail message store. Your Windows Live Mail mailbox is currently being used by another program, such as a virus scanner. close the program or wait so he could complete its operation, then open Windows Live Mail again. (0x800C0155).
I tried to reinstall WLM, restore my computer, remove anti virus protection. Nothing works
Help, please!
Hi B Clinton,
For a more specialized on issue of Windows Live Mail help, send your query on the Windows Live Forum.
Windows Live Forum -http://windowslivehelp.com/
Maybe you are looking for
-
Data on the iMac, but can not access the files.
Hi all I have a iMac Core 2 Duo (3.33, 21.5 inches) since end 2009, running 10.6.8 Snow Leopard and I'm trying to recover some files that seem to be there, but I can not access it due to an update of the unfinished software. A few years back, I tried
-
HP Officejet Pro 8620: Help indicator on and don't know how to clear.
Tried turning printer off overnight but help always seeing on what printer repressed the next morning. Scrolls unable to find the reason for light on help screen. How to clear the light helps so I can print again? The printer is wireless.
-
Vision: How to get on board all points of coordinatioin
Hello I tried to get all the points egde of a return on investment of an object with labview vision module. I used "IMAQ find edge VI", but it returns only the coordination of beginning and end. In addition, I used "IMAQ rake 3 VI", it can get every
-
XP guard wake up from sleep is does anyone know how to stop it
When I put XP ito standy, she sleeps for several times but still wakes up and running the hard drive of the diving and the log is displayed in the screen. Is there something that can run I can turn off so that is doesn't happem not?
-
I bought 300-28 how she config for stp and trunk