Similar Questions

• Cannot open InDesign Mac files on pc

  I am trying to open certain InDesign files made on a mac on my pc, but it does not work.

  I have the latest version of InDesign on my PC.

  We tried:

  Open mac files as they are.

  Resave the mac as the former format of indesign files, then open them on PC

  Export from mac to IDML files and open these files on the pc.

  Open the file on my pc as a "copy".

  Nothing works.

  I get the message:

  Either the file does not exist, you may not, or the file may be in use by another application.

  With a deadline for this project very soon so really need to solve this problem. Any ideas out there?

  I don't know what's the mac version of original for this. And it will take some time to find out.

  I see this somewhere? It would make a difference?

  Use this: http://forums.adobe.com/thread/934429

  Yes, it makes a difference. First of all, my script checks if it is indeed an InDesign file. If this is the case, it indicates which version of the file has been created with (and recent versions of the script also usefully tell you this as that means for you, that is, whether or not you can open it with your version of inDesign).

  Also check out: nothing strange in the name of the file? Don't assume - Remove the name of the original file and type in something reasonable. There are a lot of strange symbols of Mac that can have hooked a ride along.

  If this does not work: either send the file somewhere for us to watch (preferred), or open it in a hex editor and show us the first two bytes. To allow us to check what it is.

• my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• Cannot open the application "iTunes" because another user is open.

  I recently bought a new computer with vista. Installed iTunes on this computer and found that there is a problem between the two profiles on the computer. I run iTunes on my profile - but whenever my wife profile is active we are getting consistent error messages indicating "cannot open the application"iTunes"as another user, he has opened." Ask the other user to quit the application and try again.

  I need to keep itunes open in my profile - and anyway, why are they bent them in two profiles in Vista... we never had this problem under XP.
  I asked Apple for advice, and they suggested to install itunes in the second profile... which I did and said to reinstall/repair...which is not the goal... Apple then told me to contact Microsoft support as he would have to do with the admin files...
  Any advice pls.
  Thank you

  Find the Itunes.exe in the Itunes folder in Program Files.  Right click on the .exe / Properties / compatibility, look down at the bottom of this page for the 'privilege level' and check the box that says "change settings for all users.  In the heartbeat window according to the box that says "run this program as an administrator".  This can only solve your problem if you can both run under the same user name.

  When you run a program as an administrator you should get a quick UAC (unless maybe you have turned off UAC?

  To see the file extensions, you may need to go into Control Panel / folder Options / discovers, there you can uncheck "hide known file type.

• Cannot open the project file with write access.

  I saw that this problem has been reported before, but have yet to find a solution.

  I have my project file in an external hard drive.  When I plug the hard drive to another computer and want to save it, I get this message:

  "Cannot open the project file with write access.  The file may be locked, or you don't have permission to write to this location.  Select Save as... »

  I don't want to register as because other projects refer to this file and also my file is still going to be ruined.

  FYI two computers use Windows 7.

  All solutions?

  Right-click on the folder in Question and select Properties. Select tab security make sure you that you then add everyone to the list of users. Do you this by selecting edit and then add. Type in all members of the section of the object, and click ok. Then select all the user and check full control. Press Apply and we'll adjust the permissions for the folder and subfolders and files.

  Eric

  ADK

• "Sorry, Move Maker cannot open this project file. The file is not compatible with Windows Live Movie Maker or damaged. Please select a different project file. »

  Hello!
  I installed Win Live Movie Maker, but when I tried to open my .mswmm file I only got this message: "sorry, Move Maker cannot open this project file. The file is not compatible with Windows Live Movie Maker or damaged. Please select a different project file. "The file will open correctly in Windows Live Movie Maker 7, so everything should be OK. What I am doing wrong?

  Hello

  This is supported in Windows Live movie maker file type.

  http://help.live.com/help.aspx?project=wl_movie_makerv1&market=en-IE&querytype=topic&query=wl_movie_maker_ref_supportedfiles.htm

  For any request or problems related to Windows Live Movie maker, please post to the Windows Live Help forum.

  Here is the link: http://www.windowslivehelp.com/product.aspx?productid=5

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• FNDCPASS: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: no such file or directory...

  Hello friends,

  After the end of my process of cloning... I try to change my login user ID pwd through FNDCPASS, but, unfortunately it show me this error as I try to used the @CMclean.sql. also, you cannot run.

  
  

  FNDCPASS: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: no such file or directory...

  
  

  Score help out me
  

  Post the details of the version of the application and the operating system.

  Have you from the correct env file before running FNDCPASS? See (Doc ID 943005.1) for more details.

  If it comes to 12.1.x on Linux OS, please make sure that you follow all the steps by (Doc ID 761564.1) / (Doc ID 761566.1) and you have all applied pre - req OS packages.

  Thank you

  Hussein

• The security on my pc, I cannot open any pdf file, including attachments.  Help, please!

  The security on my pc, I cannot open any PDF file, including attachments. Help, please

  Sara, problem solved.  FYI-I went to Google tool bar/internet reception/security/choose medium security / clicked on allow reliable messaging users / restarted the computer and success!  Put finely pfd to download and print.  I tried this before but did restart.   Please provide this information to all users of Adobe Reader XI. Thank you, Mike Shaver

• How to open an EPS file with embedded fonts / missing without losing the appearance of these fonts?

  I often work with graphics created by others in a variety of programs (Matlab, GnuPlot,...). Sometimes, they're sending me EPS files with fonts "embedded", but when I go to open them in the CS6, I get the box alerts missing fonts / substituted.

  I also tried ' site > flatten transparency...» "as you can do with a PDF file, but I encounter an error indicating"related work that interacts with transparency can be flattened. Incorporate the work (using the links Panel) before flattening. "When I try this, I get once the box alert missing fonts / substituted.

  Someone at - he encountered the same problem and find their way around it?

  I solved the problem, so I just came back to share:

  I open the EPS file in Mac preview and it has exported to PDF.

  I then followed the procedure that I listed above to open the PDF files.

  Hope this helps everyone.

• tar: /usr/lib/vmware/modules/source/vmnet.tar: cannot open: no such file or directory (the installation failed)

  I tried to install VMWare Server for the past few hours now, but nothing helped. I use Ubuntu 8.10.

  I have already patched, had to move manually the files, and now I'm here:

  VMware

  VMware is installed, but it has not been configured (correctly)

  for this system. To (re-) set, invoke the following command:

  usr/bin/vmware-config.pl.

  root@xxxxxx-laptop: /usr/bin/vmware-config.pl

  Ensuring services for VMware Server are stopped.

  Stopping VMware services:

  Virtual machine monitor makes

  Networks bridged on/dev/vmnet0 made

  Server DHCP on/dev/vmnet1 did

  Guest network only on/dev/vmnet1 made

  Server DHCP on/dev/vmnet8 is

  NAT service on/dev/vmnet8 is

  Guest network only on/dev/vmnet8 is

  Virtual Ethernet is

  Configure libraries GTK + 2.4 relief.

  In which directory you want to install the mime type icons?

  use

  This directory contains your desktop menu input files? These files have a

  .desktop file extension. / usr/share/applications

  In which directory you want to install the application icon?

  pixmaps

  /usr/share/applications/VMware-Server.desktop: warning: value ' vmware - server.png ' key 'Icon' in the group "Desktop Entry" is an icon of name with an extension, but there should be no extension as described in the icon theme specification if the value is not an absolute path

  /usr/share/applications/VMware-console-URI-handler.desktop: warning: value ' vmware - server.png ' key 'Icon' in the group "Desktop Entry" is an icon of name with an extension, but there should be no extension as described in the icon theme specification if the value is not an absolute path

  Try to find a vmmon module suitable for your running kernel.

  None of the vmmon modules pre-built for VMware Server is suitable for your

  kernel running.  Do you want this program to try to build the vmmon module for

  your system (you must have a C compiler installed on your system)?

  Using compiler "/ usr/bin/gcc". Environment variable CC to override.

  What is the location of the directory of C header files that match your running

  kernel? /lib/modules/2.6.27-11-generic/build/include

  Extract the sources of the vmmon module.

  The construction of the vmmon module.

  Building for VMware Server 1.0.0.

  Using 2.6.x kernel build system.

  do: enter the directory ' / tmp/vmware-config4/vmmon-only '.

  do /lib/modules/2.6.27-11-generic/build/include/ - C... SUBDIRS = $PWD SRCROOT = $PWD. modules of

  make [1]: Entering directory ' / usr/src/linux-headers-2.6.27-11-generic'

  CC /tmp/vmware-config4/vmmon-only/linux/driver.o

  CC /tmp/vmware-config4/vmmon-only/linux/driverLog.o

  CC /tmp/vmware-config4/vmmon-only/linux/hostif.o

  /tmp/vmware-config4/vmmon-only/linux/hostif.c: in function 'HostIF_SetFastClockRate ':

  /tmp/vmware-config4/vmmon-only/linux/hostif.c:3441: warning: argument passing "send_sig" 2 rejects the characterization of target of pointer type

  CC /tmp/vmware-config4/vmmon-only/common/comport.o

  CC /tmp/vmware-config4/vmmon-only/common/cpuid.o

  CC /tmp/vmware-config4/vmmon-only/common/hash.o

  CC /tmp/vmware-config4/vmmon-only/common/memtrack.o

  CC /tmp/vmware-config4/vmmon-only/common/phystrack.o

  CC /tmp/vmware-config4/vmmon-only/common/task.o

  cc1plus: WARNING: command line option "- Werror - implicit-function-declaration" is valid for C/ObjC but not for C++

  cc1plus: WARNING: command line option ' - Wdeclaration - apres-declaration "is valid for C/ObjC but not for C++

  cc1plus: WARNING: command line option ' - Wno - pointer-sign "is valid for C/ObjC but not for C++

  cc1plus: WARNING: command line option ' - Wstrict - prototypes "are valid for Ada/C/ObjC but not for C++

  In file included from /tmp/vmware-config4/vmmon-only/common/task.c:1195:

  /tmp/vmware-config4/vmmon-only/common/task_compat.h: function ' void Task_Switch_V45 (VMDriver *, Vcpuid)':

  /tmp/vmware-config4/vmmon-only/common/task_compat.h:2667: warning: 'sysenterState.SysenterStateV45::validEIP' may be used uninitialized in this function

  /tmp/vmware-config4/vmmon-only/common/task_compat.h:2667: warning: 'sysenterState.SysenterStateV45::cs' may be used uninitialized in this function

  /tmp/vmware-config4/vmmon-only/common/task_compat.h:2667: warning: 'sysenterState.SysenterStateV45::rsp' may be used uninitialized in this function

  /tmp/vmware-config4/vmmon-only/common/task_compat.h:2667: warning: 'sysenterState.SysenterStateV45::rip' may be used uninitialized in this function

  CC /tmp/vmware-config4/vmmon-only/common/vmciContext.o

  CC /tmp/vmware-config4/vmmon-only/common/vmciDatagram.o

  CC /tmp/vmware-config4/vmmon-only/common/vmciDriver.o

  CC /tmp/vmware-config4/vmmon-only/common/vmciDs.o

  CC /tmp/vmware-config4/vmmon-only/common/vmciGroup.o

  CC /tmp/vmware-config4/vmmon-only/common/vmciHashtable.o

  CC /tmp/vmware-config4/vmmon-only/common/vmciProcess.o

  CC /tmp/vmware-config4/vmmon-only/common/vmciResource.o

  CC /tmp/vmware-config4/vmmon-only/common/vmciSharedMem.o

  CC /tmp/vmware-config4/vmmon-only/common/vmx86.o

  CC /tmp/vmware-config4/vmmon-only/vmcore/compat.o

  CC /tmp/vmware-config4/vmmon-only/vmcore/moduleloop.o

  LD /tmp/vmware-config4/vmmon-only/vmmon.o

  Construction modules, step 2.

  MODPOST modules 1

  WARNING: modpost: vmmon.ko module uses the marked "init_mm" symbol is not USED

  CC /tmp/vmware-config4/vmmon-only/vmmon.mod.o

  LD /tmp/vmware-config4/vmmon-only/vmmon.ko

  make [1]: leaving directory ' / usr/src/linux-headers-2.6.27-11-generic'

  CP f vmmon.ko. /... vmmon.o

  make: leaving directory ' / tmp/vmware-config4/vmmon-only '.

  The module loads perfectly in the kernel running.

  This program already created the file/dev/vmmon and was about to remove

  He someone else apparently already made.

  You have already setup network.

  You want to skip the network configuration and keep your old settings as they are?

  (yes/no)

  Extract the module vmnet sources.

  tar: /usr/lib/vmware/modules/source/vmnet.tar: cannot open: no such file or directory

  tar: error is not recoverable: leave now

  Unable to decompress the "/ usr/lib/vmware/modules/source/vmnet.tar" file in the

  directory ' / tmp/vmware-config4.

  For more information about how to troubleshoot module, please

  visit our Web site at " " http://www.VMware.com/download/modules/modules.html "and "

  " http://www.VMware.com/support/reference/Linux/prebuilt_modules_linux.html ". "

  The execution is canceled. [/ b]

  I know that vmnet.tar was here before... and he suddenly disappeared. How do we do it back, or can I download it somewhere? Thank you.

  A little worrying that this file should simply disappear - never happened on any of my guests. Check the logs, etc. for possible reasons. You get also warnings much more when you run vmware - config.pl I've ever encountered. What files did you manually have to move?

  If you download the tarball, extract the file from here and place it in the folder "/ usr/lib/vmware/modules/source", then you should probably go further. Should also be vmci.tar, vmnet.tar and vsock.tar in there.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• ORA-07391: sftopn: fopen error, cannot open the text file.

  Hello
  
  The last 3 days, we get the error in the alert below log.
  
  [ORA-00600: internal error code, arguments: [kmgs_parameter_update_timeout_1], [27091] [] [] [], [], []]
  ORA-27091: unable to queue I/O
  ORA-27072: IO file error
  
  I check as the same partners to it in metalink I found permission to check the directory solution. (DOC ID367619.1)
  I got permission from ORACLE_HOME\dbs $ to 777, but still m making the same mistake.
  
  also I try to recreate spfile so that I try to create pfile first
  
  create pfile from spfile
  
  I get the error below.
  
  ORA-07391: sftopn: fopen error, cannot open the text file.
  
  ls - lrt sp * in the below output shows $ORACLE_HOME
  
  -rwxrwxrwx 1 ora10g 3584 20 September dba10 05:42 < SID > spfile .ora
  
  Help, please.
  
  Thanks in advance

  user8757749 wrote:
  The output of ls - lrt is in the path $ORACLE_HOME\dbs only

  We also have the database version 10.2.0.4 that the spfile even uses everyday cold backup of the database.

  also, I put the 777 permission to the file.

  OK, I guess there will be corruption of the SPFILE as if edited manually or in any other cases too.

  You have a backup of SPFILE? backup of the file PFILE or?

  then starting using this SPFILE, if any backup then start with PFILE and then create SPFILE from PFILE.

  Otherwise, you can copy the contnets of the parameters of the alert log file initialization and paste in the editor and the instance of starutp.

  These are the options.

• Cannot open password protected file.

  Cannot open password protected file. I get a warning that I need to update the numbers, but I am running the most recent version - 3.6.1.

  Message itself: it's time to update! To open this spreadsheet, you will need the latest version of numbers.

  Went to icloud.com. Could not open file there either.

  It won't let me get to the point where I can enter my password.

• Photosmart c7180 cannot scan any computer file except C:\Users...etc... \Scans.

  New desktop computer. New OS than Windows 7, 64 bit. Office Enterprise 2007. Software loaded new Photosmart c7100 CD purchased from HP as directed.

  Photosmart c7180 cannot scan any computer file except C:\Users...etc... \Scans. I want to scan to E:\

  Nothing wrong with the scanned image. No error message.

  Found. Settings, scan settings, scan to... Configuration, settings button, buttons search for the solution Center, manage shortcuts scan... and then create new shortcuts in the folder of your choice!
  How bypassed can you get?

• Get the Error Message When you try to reinstall Vista: Windows cannot open the required file: E:\Sources\install.wim

  I'm trying to reinstall windows vista for the following reasons:

  1. I have SQL Server 2008 installed on my computer.  I deleted some files a long time ago and it screwed something and I couldn't reinstall.
  2. I had partitioned my hard drive for vista half and half SuSE and I deleted who and when I did, I think I deleted another partition - my recovery partition (E:\?).
  3. I need to clean my laptop.

  When I try to start the installation of a disk and I put in my product key, I get the following error:

  Windows cannot open the required file E:\Sources\install.wim.  The file does not exist.  Make suure all files required for installation are available, and restart the installation.  Error code: 0 x 80070002.

  Let me know if you have any ideas how I can fix it.  My next step was to recreate this E directory and download the install.wim file and re start the installation.  I could not find the file install.wim well.

  Rob

  Hi Rob,

  I checked the link you provided.  What you downloaded was just the Vista recovery environment.  You cannot actually re - install Vista with that and if you blew your recovery partition unfortunately you may be out of luck.  You blew your partition containing Vista runs so the SFC will be of no help either.  I wish I had better news for you, but I don't see any way o get on without a Vista DVD.  I have good news for you if.  When you get your HP drive if you have problems with the installation, we will be able to help you with that.

  Take care and let us know if you need assistance when the disc arrives. Locutys of Borg

  Resistance is futile

  If you don't succeed the first time skydiving probably isn't for you!

• Try to install the new copy off error vista WINDOWS CANNOT OPEN THE REQUIRED FILE 0x8007000D

  OT: Hey tried down laptop restore none tried to install the new copy off vista prem with no joy only error 0x8007000D WINDOWS can NOT OPEN THE REQUIRED of joy

  Portable Hi down tried restore none tried to install the new copy off vista prem with no joy only error 0x8007000D comes WINDOWS CANNOT OPEN THE REQUIRED FILE of joy

  Hi jamesgillwn,

  1. when exactly you get this error message?
  2. what disc do you use to reinstall?
  3. What is the exact error that appears when you try to start?
  4. at what point of the installation you get the error message?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  Try the steps from the following link:

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Note: When you perform the installation, you will lose the data, make sure that you need to backup your data before you perform the installation.