HP Deskjet F4200

Similar Questions

• I'll be able to use ePrint on HP DeskJet F4200?

  I have a DeskJet F4200. Is there a way you ePrint on this model?

  The 4200 is not capable of ePrint

• DeskJet f4200 install it on windows 8.1

  I want to install my HP F4200 on my OS Windows 8.1.  Where can I get software and drivers?

  BrecqueHello and welcome to the Forums of HP, I hope you enjoy your experience!

  I see you are trying to install the printer.  I would like to help.

  I recommend to download and run the HP Deskjet F4200/F4224 all-in-One Printer series full feature software and driver.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• How to change a disk for HP Deskjet F4200 series for Windows 7

  Hello

  I have a HP Deskjet F4200 all-in-One series and a game disc upward for Windows 2000, XP, Vista, but now I have Windows 7, so I can it pass or will it still work ok on this system if I install it?

  Can someone advise please?

  In my view, that it is your printer in this case.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=3746674#N183

  Download the Win 7 software and drivers for your operating system.

• DeskJet F4200 Series CD Incompatible with Windows 7

  Hello!

  Now I have a new HP G62 Notebook with Windows 7, 64-bit, and the CD for my Deskjet F2400 gives an incompatibility message when inserted in my notebook. The CD is for Vista and earlier operating systems.

  I downloaded/installed something called "dot4patch_reboot", I found a solution in the support section, but always the same 'inconsistent' message appears.

  A sollution that works?

  I suggest you go to this site www.hp.com/support

  take note of the number of your product for your printer, then put on this Web site and when you get to the page where you will be asked for your operating system checked if there is a driver for a windows 7...

  If there is:

  1. choose the proper win 7 x 64, and then click Next

  2 locate the pilot field and then select or search for full features software

  3 dl and install

  ENJOY!

• install a deskjet f4200 all-in-one

  p = p - wnloaded the driver and hp software - I went to downloads and extracted the application, now I am trying to install the printer and it does not find the download I just fact-help! What should I do next? I have not plugged in the usb cable, still... it says is not up to this requested to...

  If it has been extracted, then you might find the Setup file in the temp folder.

  Select the Windows startup icon, in the search programs and files , type %temp%. There should be a starting folder by 7z. Open that folder and it should have a record of your product, the F4200 containining. The setup.exe file must be there.

  Otherwise, you can always download it again and save it to a location you can remember.

• How to install a printer hp deskjet f4200 series with windows 7 ultimate

  I have the disc and when I put and try to add printer says spooler does not feed so I tried to diagnose problems and it says something about the not shared printer and it drives me crazy. Why can't I install a simple printer?

  Hello Angela,.

  The spooler service is required for a printer at work; It starts automatically when Windows starts. So the first thing I would say is restart your computer without the disc. Then, once the computer has restarted, insert the disc and try again.

  If this does not work, you might want to try the hp.com site. Here, you can download the latest version of your driver, but also diagnostic tools that could help to diagnose printer problems. Go here and enter your model number: http://www8.hp.com/us/en/support-drivers.html .

  Let me know if this helps you.

  Kind regards

  BearPup

• HP Deskjet F4280: HP Deskjet F4280 (download only software suite)

  Hello

  I tried to install the driver/software from the website package, but I still get it.

  In the form of an error box above the install so that it's on control systems.

  I found no way around this, how ever, the drivers work with plug-and-play, but I need the software that came with it also.

  I was unable to locate a download for JUST the software suite and not drivers.

  Is anyone able to provide it?

  Hello again @Kryptical,

  It's a delicate issue, but I have a few more suggestions for us.

  Let try to launch a scrubber from the HP software that you have already installed, to remove what is already on your computer from previous attempts to install. Then we will try to re-installation using HP printer Installation Wizard.

  1. First of all, we will restart the computer.
  2. Once it starts up, press and hold the Windows Logo key () on the keyboard and the 'R' to open the Run dialog box.
  3. Type folder in the Run dialog box, and then press ENTER. The Temp folder opens.
  4. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  5. Download a new version of the software and choose Save as, save to desktop > series all-in-one printer, HP Deskjet F4200/F4224 full functionality of software and the driver
  6. After downloading software and extracts, open the temp folder again (you can use the instructions in step 1)
  7. Locate and open the folder starting with 7z (example: 7zS2356)
  8. Open the Util folder
  9. The CCC folder
  10. If you have a computer HP run the L3uninstall.exe. If you have a computer no HP run the L4uninstall.exe, however, it will remove all THE HP software, including other installed printers.
  11. Restart the computer to complete the uninstall.
  12. Follow these steps to reset the registry settings and options for Windows Installer.

• To re - install my web download drivers for my Deskjet F4280 all-in-One Printer

  I have installation problems with my Deskjet F4200 all-in-One printer on my Windows 7, Home Premium desktop PC / 64 bit version & I had, once last month, uninstalled my I bought online for my version of platform & bit of the os, printer drivers & all program of printer drivers have been uninstalled successfully in the programs section and my control panel features except for :
  HP Software IDF.

  I ended up, in addition to the tasks above performed & completed, deleted all files remaining hp of my drive (c).

  I discovered a web page of troubleshooting on the hp.com Web site, under the following title:

  ""Of HP Installer has stopped working "or the installation program does not run when you install under Windows 7 HP printing software"

  on the following web page: "http://support.hp.com/us-en/document/c03030583".

  My processor information:
             "AMD Athlon II X 2 240 processor / 2.80 Ghz '.

  I tried to re - install my drivers for my printer, & have problems trying to re - install, with no luck.

  I have read the following information since the last link web I mentioned (SHOWN above and here @: 'http://support.hp.com/us-en/document/c03030583') trying to follow them to correct my problem exact, but without success.

  If anyone who reads this could have a solution to my problems, please contact me either by one or more of the following methods:

  {Deleted private information}
  

  Thank you, Christopher Canfield.

  The troubleshoting document you provided a link to not tell to use the hotfix with the processor installed in your desktop PC.

  Have you tried to use the Wizard for Windows HP printer installation?

  I recommend to try it. It can solve the problem you are experiencing.

  If it is truncated, without success, then click on the following link and select Windows 7 from the list provided on the HP document.

  Uninstall the HP printer software.

  Once you have completely uninstalled the printer software and driver, run the HP printer install wizard again.

  Please keep us in the loop by posting your success or lack of success with the installation of the software of the printer here in your thread.

• F4200 all-in-One scanner all of a sudden does not work

  I was very happy with my HP Deskjet F4200 all-in-One printer/scanner.

  Suddenly today the scanner refuses to contribute.

  I get a report:

  ERROR

  Cannot perform the analysis because another program has control of the HP imaging device.  Try the following steps.  After each step, try to scan the image.
  -Restart the program.
  -Close all programs that might be using the device.
  -Restart the computer.

  I don't have any other program open.  I closed the printer/scanner program, shut down the computer - but remains problaem.       What should I do now?

  Uninstall and reinstall?  Or something else?

  Please someone advise

  Ruth

  Hi @Rufels

  I'd love to help you boost your F4200 analysis. The following document addresses the issue you described; "Another program has control of the scanner" Message appears on the computer when scanning.

  I hope this helps.

• HP Deskjet F4240: My printer is connected to my computer

  I have a HP DeskJet F4240 series and I want to connect it with my new Asus computer. The problem is that when I plug the USB into my computer, the printer does not appear. I would try to print but I can't find the name of the printer. Help, please.

  Hello

  Thank you for using the HP forum.

  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-F4200-all-in-one-printer-series/3390945/model/3571306#Z7_3054ICK0K8UDA0AQC11TA930O2

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  Please plug the cable USB ONLY when prmpted to do so by the software.

  Hope that helps.

• HP Deskjet F4280 don't scan on MAC OSX 10.6

  Just bought a MacBook Pro 13 "which came with a HP Deskjet F4280 all-in-One printer/scanner/copier.  The MacBook is under Snow Leopard - 10.6.  Install the drivers Mac OS since the CD HP Deskjet F4200 Series (Version 9.6).  Everything works well except the scan.  I can print.  Can I photocopy it.  Whenever I try to scan, I get the following message...

  Error.  Sorry, an unknown error has occurred.  I can hear the scanner moving until the error is displayed.

  I thought that maybe there could be an update of the Mac software - so I checked and downloaded the version 9.7.1 of the drivers on the HP site and install them.  However, I still get the same message every time I try to run a scan.  Software HP Scan Pro (Version 7.4.5) loads the scanner begins to work, and then I get the error message.

  I noticed other users complaining about the same problem, but have not seen all the solutions.  Y at - it a solution or a fix to this problem.  Digitization is a thing I need to be able to do.

  Hey, I was able to find a solution to your problem. I had the same problem too.

  Rather than support the new analysis, go to the Image Capture which is located in the Application folder. Click the HP Deskjet printer on the devices tab, and it will start scanning.

  I hope that helped!

• DHH on Mavericks Scan utility

  I've recently updated to the Mavericks and my scanning for my Deskjet F4280 HP utility does not open, it returns this error message.  Where can I find an updated version?

  Process: HP Scan [43597]
  Path: Applications/Hewlett-Packard/HP Scan.app/Contents/MacOS/HP Scan
  ID: com.hp.scan.app
  Version:?
  Code type: X 86 (native)
  Parent process: launchd [384]
  Responsible for: HP Scan [43597]
  ID: 635424526
  
  Date/time: 2014-04-16 10:08:44.088-0400
  OS version: Mac OS X 10.9.2 (13 C 64)
  Report Version: 11
  Anonymous UUID: 04D3DA60-A81A-4643-7C85-5F547C859C4C
  
  Sleep/wake UUID: 8679BF4C-54D4-4A6E-81AB-03E5D9C1A220
  
  Crashed thread: 0
  
  Exception type: EXC_BREAKPOINT (SIGTRAP)
  Exception codes: 0 x 0000000000000002, 0 x 0000000000000000
  
  Request for clarification:
  dyld: launch, loading of the dependent libraries
  
  Dyld error message:
  Library not loaded: /Library/Printers/hp/Frameworks/HPWorkflowsManager.framework/Versions/A/HPWorkflowsManager
  Referenced from: Scan.app/Contents/MacOS/HP Applications/Hewlett-Packard/HP Scan
  Reason: image not found
  
  Binary images:
  0x8fe7d000 - 0x8feaf417 dyld (239.4) < 2E655535-479B-3E48-ADD3-6278819CA38A >/usr/lib/dyld
  0x913be000 - 0x91fdcff3 com.apple.AppKit /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit < 07125263-9E97-3A47-BBD3-6FB462910565 > (6, 9 - 1265.19)
  0x9978a000 - 0x99ab5ffe com.apple.Foundation /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation < C33A8984-7E97-36BE-B842-EE4FE35F53EA > (6, 9 - 1056.13)
  
  Model: MacBook5, 1, MB51.007D.B03 of BootROM, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, MSC 1.32f8
  Graphics card: NVIDIA GeForce 9400 M, NVIDIA GeForce 9400 M, PCI, 256 MB
  Memory module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533641465238432D47372020
  Memory module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533641465238432D47372020
  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
  Bluetooth: Version 4.2.3f10 13477, 3 services, 23 aircraft, 1 incoming serial ports
  Network service: Airport, AirPort, en1
  Serial ATA Device: Hitachi HTS543225L9SA02, 250,06 GB
  Serial ATA Device: HL-DT-ST DVD - RW GS21N
  USB device: Deskjet F4200 series
  USB device: ISight built-in
  USB device: Hub BRCM2046
  USB Device: USB Bluetooth host controller
  USB device: Apple keyboard / Trackpad
  USB Device: IR receiver
  Crush Bus:

  Hi there DaleTol, welcome to the forums!

  I saw your post about the problem of scanning you are having since the upgrade to the Mavericks. After research to help out you, I found that actually no scanning or downloadable software driver is available for the Deskjet F4280 and the Mavericks. I'll show you some information below, I found for installation on Mavericks and your scanning options.

  V10.9 OS X Mavericks: installing and using the printer on a Mac

  These are the scan with the Mavericks (work around methods) options:

  How to perform a scan: OS X v10.9

  I hope that helps clear up any confusion.

  Have a great weekend

• saving a document scanned in pdf format

  I have a desktop F4272 printer / scanner.

  It is used to be connected to a PC running Windows XP.  The pdf option was not available on the menu drop down, but after contacting e-mail Support Team in 2009, I ran OCR software and the pdf option has been made available

  The F4272 is connected to a computer to laptop Toshiba Satellite Pro under Wndows 8.1.  The F4272 set up the disc is not compatible with windows 8, it's why I can't launch the OCR software.  Windows 8 'automatically' configured the F4272 but file scanner options do not include the pdf - how to include this? Thank you

  Greetings @moreno1 ,

  Welcome to the forums

  Perhaps the installation disc is not compatible with Windows 8/8.1, and that's okay. You are able to download and install the software to print from a download. Below is the direct link for your driver. I hope that helps!

  HP Deskjet F4200/F4224 all-in-One Printer series Full Feature Software and Driver

  Best wishes

• Old printer in new issue of system

  I have Windows 8/new laptop computer and an old printer/scanner (HP Deskjet F4200 series). I tried to install the program cd old printer on the new laptop and it says that my printer is too old for my new system. My printer is still great, and I hate having to buy a new one! Anyway around this? Drivers? Help will be really appreciated! I looked up my printer series... just install the drivers? Install the program after I installed the drivers? Thanks much for any help!

  The driver can be downloaded from HP here.  Download the driver, and after you download it, run the program.  Do not connect the printer up to be instructed by the installer.