tar: /usr/lib/vmware/modules/source/vmnet.tar: cannot open: no such file or directory (the installation failed)

Similar Questions

• "Could not open/dev/vmmon: no such file or directory." Please make sure that the "vmmon" kernel module is loaded. »

  I installed vmware Player on a linux Open Suse (32-bit), the supplied file .bundle machine. It worked very well, and I could load my file of virtual machine very well. Then, my machine had a random failure. When it restarts, I could no longer use my virtual machine, always get the error:

  "Could not open/dev/vmmon: no such file or directory."

  Please make sure that the "vmmon" kernel module is loaded. »

  I look in / dev, and of course, there is no vmmon. I see a lot of archived messages stating that you must run the script ' vmware - config.pl '... (more specifically the following link: ) http://blog.solutionperspectivemedia.co.UK/?p=6 )

  but I do not have it. It seems that maybe it was a part of the installation (no-bundle) more old?

  What should I do? Is this a known problem, as indicated in this Web site? Or random failure caused something? I'm quite confused.

  Have you tried to uninstall as root? Otherwise I think it won't work.

  With respect to your original problem, I got it, too, and that's what I did:

  sudo mv/usr/lib/vmware/modules/binary /usr/lib/vmware/modules/binary.old

  vmware-modconfig--console--install-all--appname sudo = 'VMware Player' - icon = 'vmware-player '.

• Pull information from /usr/lib/vmware/vm-support/bin/swfw.sh

  What is the best way to pull information from the report and treat?  Ideally, I would like to put the content in a kind of table and query through to different things, I want (versions of components etc.).  Thank you!

  Are there elements that people are aware of which are not contained in the output?  Seems to contain a lot of information system (bios version, firmware disc etc.)

  $User = "root".

  $Pswd = "password"

  $Computer = "server name".

  $plink = "s:\Putty\plink.exe".

  $plinkoptions = '$Computer-l root - pw $Pswd.

  # launch ssh

  Get-vmhost $Computer | Get-vmhostservice | where {$_.} Key - eq "TSM - SSH"} | Start-VMHostService-confirm: $false | Out-Null

  $cmd1 = ' /usr/lib/vmware/vm-support/bin/swfw.sh > usr/lib/vmware/vm-support/bin/output.txt'

  $remoteCommand = ""' + $cmd1 + "'"

  $command = ' echo there "+" "+" | "+" "+ $plink +" "+ $plinkoptions +" "+ $remoteCommand

  # run remote command

  $msg = expression invoke-command $command

  $msg

  # Disable ssh

  Get-vmhost $Computer | Get-vmhostservice | where {$_.} Key - eq "TSM - SSH"} | Stop-VMHostService-confirm: $false | Out-Null

  You seem to redirect the output of the command into a file on the local file system.

  Why is this?

  If you leave the output come from the screen, it should be later in the $msg variable.

  And I suspect you easily retrieve the necessary info with a RegEx expression.

  What information you want to extract exactly?

• / usr/lib/VMware/bin/VMware: symbol lookup error: /usr/lib/vmware/lib/libssl.so.0.9.8/libssl.so.0.9.8: undefined symbol: EVP_ecdsa

  Hello

  After a few package update/install vmware (7.0.1 build 227600 x86_64) has stopped working.  When you try to start, I get an error:

  / usr/lib/VMware/bin/VMware: symbol lookup error: /usr/lib/vmware/lib/libssl.so.0.9.8/libssl.so.0.9.8: undefined symbol: EVP_ecdsa

  ameeba 06:38 & gt; md5sum /usr/lib/vmware/lib/libssl.so.0.9.8/libssl.so.0.9.8

  8ee5d0ab909cbf5604ab025f836f5cc0 /usr/lib/vmware/lib/libssl.so.0.9.8/libssl.so.0.9.8

  System is Fedora Core 11 with all updates with a few multimedia tools and the rpmfusion Nvidia drivers.

  ameeba 06:41 & gt; less /tmp/vmware-pasi/setup-9349.log

  Mar 15 06:41:15.938: app-140707592353520 | Journal for VMware Workstation pid = 9349 version = 7.0.1 build = build-227600 option = output

  Mar 15 06:41:15.938: app-140707592353520 | The process is 64-bit.

  Mar 15 06:41:15.938: app-140707592353520 | Host codepage = UTF-8 encoding = UTF-8

  Mar 15 06:41:15.938: app-140707592353520 | Login to /tmp/vmware-pasi/setup-9349.log

  Mar 15 06:41:16.077: app-140707592353520 | Mark modconf initialized interface

  Mar 15 06:41:16.077: app-140707592353520 | modconf initialized library

  Vmware reinstalling did not help.

  Any ideas?

  -Pasi-

  We can suspect that your libcrypto.so were captured earlier a comes with vmware, try: export LD_LIBRARY_PATH=/usr/lib/vmware/lib/libcrypto.so.0.9.8 & vmware & command line

• exec: 206: / usr/lib/vmware-vcenter-converter-standalone/converter-gui: not found

  Hello everyone this is my first post!

  I am currently running Ubuntu 8.10 (x86_64) and Converter 4.0 installation has been completed successfully. I'm running into a problem when running command "vmware-converter-client", I get the following error...

  exec: 206: / usr/lib/vmware-vcenter-converter-standalone/converter-gui: not found

  I searched the forum but I can't seem to find anything that refers to this specific error. I've seen other posts that do not include this error, but are usually accompanied by a missing library etc...

  I even tried to run the executable files in the directory/var/lib/vmware-vmware-vcenter-converter-standalone directly, but then, I get the following errors...

  bash:. / vmware converter: no such file or directory

  bash:. / Converter-gui: no such file or directory

  The files are obviousely there!

  ?:|

  You're 64-bit Linux has support on the implementation of the binary 32 bits? All the binary converter are 32-bit

• VMware Workstation 9: could not open/dev/vmmon: no such file or directory

  I'll have a plethora of problems installing and get VMware Workstation 9 (9.0.2 build-1031769) to work on Ubuntu 13.04 (kernel 3.8.0 - 26-generic).

  I experienced exactly the same process on my laptop and it works perfectly, while on the desktop, it seems that everything breaks. Could someone give me some kind of help / advice on how I can do to get this working. I tried full uninstall / reinstall of the software, headers of the kernel, kernel images, different kernels, patches here on fresh installs of everything I can think of. Here are the issues I encounter in the order of importance (or so I think):

  (1) whenever I try to open my new (and virtual) machine, I get the error sequence of:

  "Could not open/dev/vmmon: no such file or directory. " Please make sure that the "vmmon" kernel module is loaded. '--> 'Failed to initialize the device monitor. "->" cannot change the power state of VM: could not find a valid peer to connect to '

  
  

  (2) every time I try to run the following command to configure the modules on a completely fresh setting (reinstalled kernel, vmware) I get the following output:

  sudo modconfig vmware - console - install-all

  Stopping VMware services:

  Demon of authentication makes VMware

  VM communication interface socket family is

  Virtual machine communication interface is

  Virtual machine monitor makes

  File system is blocking

  Using 2.6.x kernel build system.

  do: enter the directory "/ tmp/modconfig-G9S0TM/vmmon-only '.

  / usr/bin/make /lib/modules/3.8.0-26-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.8.0-26-generic'

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/linux/driver.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/linux/driverLog.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/linux/hostif.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/apic.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/comport.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/cpuid.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/hashFunc.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/memtrack.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/phystrack.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/task.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/vmx86.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/vmcore/moduleloop.o

  LD [M] /tmp/modconfig-G9S0TM/vmmon-only/vmmon.o

  Construction modules, step 2.

  MODPOST modules 1

  Warning: "mcount" [/ tmp/modconfig-G9S0TM/vmmon-only/vmmon.ko] undefined!

  CC /tmp/modconfig-G9S0TM/vmmon-only/vmmon.mod.o

  LD [M] /tmp/modconfig-G9S0TM/vmmon-only/vmmon.ko

  make [1]: leaving directory ' / usr/src/linux-headers-3.8.0-26-generic'

  / usr/bin/make - c $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-G9S0TM/vmmon-only '.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-G9S0TM/vmmon-only '.

  CP f vmmon.ko. /... vmmon.o

  make: leaving directory ' / tmp/modconfig-G9S0TM/vmmon-only '.

  Using 2.6.x kernel build system.

  make: entering directory ' / tmp/modconfig-G9S0TM/vmnet-only»

  / usr/bin/make /lib/modules/3.8.0-26-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.8.0-26-generic'

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/driver.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/hub.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/userif.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/netif.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/bridge.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/filter.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/procfs.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/smac_compat.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/smac.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/vnetEvent.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/vnetUserListener.o

  LD [M] /tmp/modconfig-G9S0TM/vmnet-only/vmnet.o

  Construction modules, step 2.

  MODPOST modules 1

  Warning: "mcount" [/ tmp/modconfig-G9S0TM/vmnet-only/vmnet.ko] undefined!

  CC /tmp/modconfig-G9S0TM/vmnet-only/vmnet.mod.o

  LD [M] /tmp/modconfig-G9S0TM/vmnet-only/vmnet.ko

  make [1]: leaving directory ' / usr/src/linux-headers-3.8.0-26-generic'

  / usr/bin/make - c $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-G9S0TM/vmnet-only.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-G9S0TM/vmnet-only.

  CP f vmnet.ko. /... vmnet.o

  make: leaving directory ' / tmp/modconfig-G9S0TM/vmnet-only.

  Using 2.6.x kernel build system.

  do: enter the directory "/ tmp/modconfig-G9S0TM/vmblock-only.

  / usr/bin/make /lib/modules/3.8.0-26-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.8.0-26-generic'

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/block.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/control.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/dentry.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/file.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/filesystem.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/inode.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/stubs.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/module.o

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/control.c: in function 'ExecuteBlockOp ':

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/control.c:285: warning: assignment of incompatible pointer type

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/control.c:296: warning: passing argument 1 of the "putname" incompatible pointer type

  include/Linux/FS.h:2052: Note: expected ' struct filename *' but argument is of type ' char *'

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/super.o

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/inode.c:49: warning: initialization from incompatible pointer type

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/dentry.c:38: warning: initialization from incompatible pointer type

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/dentry.c: in function 'DentryOpRevalidate ':

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/dentry.c:104: warning: argument passing 2 of 'actualDentry-> d_op-> d_revalidate' makes whole pointer without a cast

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/dentry.c:104: Note: expected 'unsigned int' but argument is of type ' struct nameidata *'

  LD [M] /tmp/modconfig-G9S0TM/vmblock-only/vmblock.o

  Construction modules, step 2.

  MODPOST modules 1

  Warning: "mcount" [/ tmp/modconfig-G9S0TM/vmblock-only/vmblock.ko] undefined!

  Warning: "putname" [/ tmp/modconfig-G9S0TM/vmblock-only/vmblock.ko] undefined!

  CC /tmp/modconfig-G9S0TM/vmblock-only/vmblock.mod.o

  LD [M] /tmp/modconfig-G9S0TM/vmblock-only/vmblock.ko

  make [1]: leaving directory ' / usr/src/linux-headers-3.8.0-26-generic'

  / usr/bin/make - c $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-G9S0TM/vmblock-only.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-G9S0TM/vmblock-only.

  CP f vmblock.ko. /... vmblock.o

  make: leaving directory ' / tmp/modconfig-G9S0TM/vmblock-only.

  Using 2.6.x kernel build system.

  do: enter the directory "/ tmp/modconfig-G9S0TM/vmci-only.

  / usr/bin/make /lib/modules/3.8.0-26-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.8.0-26-generic'

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/linux/driver.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/linux/vmciKernelIf.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciContext.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciDatagram.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciDoorbell.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciDriver.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciHashtable.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciEvent.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciQPair.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciQueuePair.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciResource.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciRoute.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/driverLog.o

  LD [M] /tmp/modconfig-G9S0TM/vmci-only/vmci.o

  Construction modules, step 2.

  MODPOST modules 1

  Warning: "mcount" [/ tmp/modconfig-G9S0TM/vmci-only/vmci.ko] undefined!

  CC /tmp/modconfig-G9S0TM/vmci-only/vmci.mod.o

  LD [M] /tmp/modconfig-G9S0TM/vmci-only/vmci.ko

  make [1]: leaving directory ' / usr/src/linux-headers-3.8.0-26-generic'

  / usr/bin/make - c $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-G9S0TM/vmci-only.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-G9S0TM/vmci-only.

  CP f vmci.ko. /... VMCI.o

  make: leaving directory ' / tmp/modconfig-G9S0TM/vmci-only.

  Using 2.6.x kernel build system.

  do: enter the directory "/ tmp/modconfig-G9S0TM/vsock-only '.

  / usr/bin/make /lib/modules/3.8.0-26-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.8.0-26-generic'

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/af_vsock.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/notify.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/notifyQState.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/stats.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/util.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/vsockAddr.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/driverLog.o

  LD [M] /tmp/modconfig-G9S0TM/vsock-only/vsock.o

  Construction modules, step 2.

  MODPOST modules 1

  Warning: "mcount" [/ tmp/modconfig-G9S0TM/vsock-only/vsock.ko] undefined!

  CC /tmp/modconfig-G9S0TM/vsock-only/vsock.mod.o

  LD [M] /tmp/modconfig-G9S0TM/vsock-only/vsock.ko

  make [1]: leaving directory ' / usr/src/linux-headers-3.8.0-26-generic'

  / usr/bin/make - c $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-G9S0TM/vsock-only '.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-G9S0TM/vsock-only '.

  CP f vsock.ko. /... vsock.o

  make: leaving directory ' / tmp/modconfig-G9S0TM/vsock-only '.

  Starting VMware services:

  Virtual machine monitor failed

  Virtual machine communication interface failed

  Family of VM communication interface socket failed

  File system is blocking

  Virtual Ethernet failed

  Demon of authentication makes VMware

  Cannot start the services

  (3) I often get the Ubuntu "this program has planted" messages on "/ usr/lib/vmware-installer/2.1.0/vmis-launcher" "' (this message of crash always occurs when you run the"vmware-modconfig"above command on a new installation.

  (4) at different times during Assembly and have VMware workstation on my system I get Ubuntu hangs on "/ usr/lib/vmware/bin/appLoader" and even "/ bin/su" (especially when you are trying to install - su NEVER blocks anywhere else).

  Thoughts / ideas on what is happening on earth / what could have caused this all go so downhill / how to go about fixing?

  Thank you

  Solved.

  The problem is that for another program I used gcc - 4. 4 instead of later. Restore the (by update-alternatives - config ) for gcc, g ++ and CPC - bin.

  Not a very graceful exit to have a version not valid I would say, maybe some sort of basic check could be added to ensure that the correct versions are present?

• VMWare Fusion 6.0.5: Could not open/dev/vmmon: no such file or directory.

  I've been running VMWare Fusion 6 on my MacBook Pro with the Mavericks for quite awhile.  I just got a Mac Mini with Yosemite and I want to copy one of my virtual machines of the MBP to the Mini.

  I tried to just copy the vmware.vm of the MBP to the Mini but when I open it and try to start it I get the following errors:

  • Unable to open/dev/vmmon: no such file or directory.

  Please ensure that the "vmmon" kernel module is loaded.

  • Could not initialize the surveillance apparatus.
  • Internal error

  I also tried to import the vmware.wm file, but it is always grayed out.

  How can I copy a virtual machine from one Mac to another?

  Hi atj777,

  Are you absolutely certain that this is Fusion 6.0.5, you're there?  Fusion 6.0.4 and earlier would fail on Yosemite the way you describe.  There are many other possible causes of the same error message, but it would be the first thing I would check a second time.  (My apologies if you have already verified!)

  What version of Yosemite are you running?  10.10.2?

  It can also be useful to restart your Mac to see if that helps... sometimes he does.

  To answer your question directly: simply copy the ".vmwarevm" package on the whole should be enough.  The message you see is a generic merge error and has nothing to do with the copy process.

  See you soon,.

  --

  Darius

• Question of el capitan "-bash: / usr/bin/runenergyplus: no such file or directory".

  Hello

  I'm new to mac. I try to run a simulation software "EnergyPlus" but cannot run the software and end with "-bash: / usr/bin/runenergyplus: no such file or directory". Can someone help me solve the issue.

  Thank you

  RKishore

  Hello R_kishore,

  This program is not compatible with recent versions of Mac OS X. And to tell the truth, it's always bad. If they had done it correctly at first, he could have still worked.

• / usr/bin/linux32: /opmnctl: no such file or directory

  Hello

  We have been updating on the instance of 11i to R12.2.0 on OEL5U8 - 64 Bit

  At the end of the American English driver Patch, I configured auto config in db node.

  then next step run Quick Setup to configure the instance of release 12.2 E - Business Suite completed and started the application services.

  All services came except opmn.

  Error:

  [applmgr@r122 scripts] $./adapcctl.sh start

  You are running version 120.0.12020000.2 adapcctl.sh

  From OPMN managed instance Oracle HTTP Server (OHS)...

  / usr/bin/linux32: / ebiz/apps/fs1/FMW_Home/webtier/forums/EBS_web_VIS_OHS1/bin/opmnctl: no such file or directory

  / usr/bin/linux32: / ebiz/apps/fs1/FMW_Home/webtier/forums/EBS_web_VIS_OHS1/bin/opmnctl: no such file or directory

  adapcctl.sh: exit with status 0

  I checked there is no directory by name under FMW_HOME/fs1/webtier instances and to FMW_HOME/fs2/webtier also folder there is no case of name

  AutoConfig exisits with 0

  How we can solve the problem, please suggest.

  I checked

  Cannot install the Web Tier utilities ebs 12.2.0

  After the installation of E - Business Suite 12.2, why OPMNCTL missing? (Doc ID 1619645.1()

  
  

  Here mentinoning to reinstall... is there any resolution please suggest.

  
  

  
  

  Thank you

  Shaik
  

  Hello

  I deleted the network server in which make the upgrade. then I created the Instance R12.2 in another server where I have already even OS.

  Once Installation completed "instance" directory which is 22 MB copied to the local disk.

  Then the new server that crashed and started server where iam to upgrade and continued.

  Thank you

  SHaik

• Remove VMware completely when the installer fails - HOW?

  I had VMware Workstation 8 works fine on a 64-Bit machine of Windows 7.

  I bought 9 Workstation and tried to install it, and he says that he should uninstall version 8.

  Well, it failed.  Now, I can not install ANY version, version 7, 8 or 9, all versions.

  The installer is apparently unable to deal with an error to uninstall an earlier version. Why?

  [at this point, Monday, December 17, 2012, it is all fixed with VMware technical phone support. It involves several

  steps and a key was to use the utility Fixit from microsoft from here: http://support.Microsoft.com/kb/2438651/en-us

  and 1308 VMware knowledge base article http://KB.VMware.com/kb/1308 .

  Microsoft fixit scanner not found VMware, but she showed 'unknown' (or other?) and VMware

  technical support took the key to the article above of 1308

  {0D94F75A-0EA6-4951-B3AF-B145FA9E05C6} HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\

  Paste in the registry key when asked by the fixit utility

  {0D94F75A-0EA6-4951-B3AF-B145FA9E05C6}

  Who noted a mistake and fixed it.

  My options are:

  1 reinstall the Windows operating system and start from scratch (which will take a few days to catch up with installed programs).

  NOTE: DON'T DO THIS WITH THE SUPPORT OF VMWARE

  2. remove all vestiges of the previous installations of VMware so I can install without being told that the installer has found another version.

  NOTE: THIS WAS DONE BY THE TECHNOLOGY WITH THE HELP OF THEIR CONTROL PROGRAM REMOTE

  ------------------------------------------------------------------------------

  They have the option "/ clean" on the installer, which does not work, but it must do what he pretended to do so, remove all previous keys and elements.

  What a VMware solution that fixed what well Setup obviously cannot fix. It should prepare my computer so it will NOT report versions of VMware if I can install two versions 7, 8, or 9.

  -------------------------------------------------------------------------------------------

  With the help of VMware support, they were able to completely remove VMware and install VMware 9. I'm going to

  to try to writeup that they did, but the solution took about 30 minutes and many find and remove the

  Directories of VMware.

  I now have version 9 installed and it works fine.

  Post edited by: jeff92677 - TO EXPLAIN THAT THE PROBLEM IS SOLVED, AND THANKS to VMWARE for THE SOLUTION

  This feature was introduced in WS 7.
  Since then WS installers often think that older versions is present - and this happens even on systems that has never ever been before WS.

  On the issue of the port... This is normal. Most of the time it does not configure the port correctly during a first installation.
  You have installed Skype? -Make sure that remove you it temporarily.
  Then stop vmware - pass manually - change the
  C:\Documents and Settings\All Users\Application Data\VMware\hostd\proxy.xml
  -use an equivalent path for win7 of course - so that it uses the port you want.

  445

  Then restart vmware - pass and it works hopefully

• Delete the files from/usr/lib/vmware/hostd/docroot/downloads with Powercli

  I'm tying to achieve the same goal as their example of cron in this KB with PowerCLI or c#:
  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1026359

  We have tools that bring together our newspaper bundles ESX/ESXi and ship it to Vmware support for analysis, but the files never get removed from the * / downloads directory on the host.

  We have a mixed esx 3.5 / 4.0 to esx / esxi 4.1 environment. I prefer not to run local cronjobs on the hosts. Someone at - it a good way to handle this with PowerCLI or c# code against vCenter?

  Thank you!

  Jeff

  On the ESX servers, where you have a COS, you can use the command subsequently plink.exe alottt.

  There is an example in the HBA information: PowerCLI wire.

  On an ESXi server, you can use the same procedure, but it requires a bit more.

  And the environment that you are connecting is somewhat more limited compared to the COS.

  See the example of policies to change password on ESXi

• SFC scan reports sidebar.ini and source file as a corrupted file even after the installation of WIndows Vista repair.

  Hey, I'm Ryan.
  I am running windows vista 32 bit and I get 2 files corrupted when I run SFC - they relate to the windows sidebar (sidebar.ini and store source file is also corrupted). I did a repair installation, and this always happens when I run the SFC.

  1 - is this going to cause any problems to my laptop if I leave it alone?
  2 could it be related to a virus?
  I'm sorry for the questions, but I'm confused as to how this happened... Any help would be appreciated.
  Thank you very much.

  1 NO.

  2 NO.

  This SFC message could be caused by the manufacturer of the computer adding gadgets to the sidebar before installation of Windows for you, or some other change to the sidebar gadgets

  http://www.vistax64.com/general-discussion/219350-sfc-cannot-repair-sidebar-ini-hash-error.html.

  http://support.Microsoft.com/kb/947595

• Anyone get this message: sh: / usr/bin/lockfile: no such file or directory.

  I hear this from time to time and have no idea why. Anyone know what this means?

  

  Hello Gemmett,

  You are using an older version of SuperDuper!

• SE /usr/lib/amd64/ld.so.1: bad ELF interpreter during installation GC12C

  Hello
  
  I try to install GC 12 c on OEL 5.3 64-bit
  I have the following
  
  [oracle@gcsrvr install] $ id - a
  UID = 500 (Oracle) gid = 503 (oinstall) groups = 501 (oracle), 502 (dba), 503 (oinstall)
  [oracle@gcsrvr install] $ uname - a
  Linux gcsrvr 2.6.18 - 128.el5 #1 SMP Wed Jan 21 08:45:05 this 2009 x86_64 x86_64 x86_64 GNU/Linux
  [oracle@gcsrvr install] $. / runInstaller
  bash:. / runInstaller: /usr/lib/amd64/ld.so.1: bad ELF interpreter: no such file or directory
  [oracle@gcsrvr install] $
  
  I use OEL 5.3 64-bit and I have too much the dir/usr/lib/amd64
  
  Anyone who has had this issue before?
  
  Concerning

  You can check if you have downloaded the 12 c EM the right OS software (for example, for EM12c for 64-bit OEL not for Solaris 64 bit).

  Kind regards
  -Loc

• / usr/bin/VMware: line 31: 5266 Segmentation fault

  Greetings,

  just installed VMware-Workstation - 6.5.1 - 126130.x86_64.rpm

  under Open Suse 11.0 64-bit (Linux linux-bymz 2.6.27.7 - 9-default #1 SMP 2008 - 12 - 04 18:10:04 + 0100 x86_64 x86_64 x86_64 GNU/Linux)

  installation went well but when I'm trying to:

  & gt; VMware

  Login to /tmp/vmware-secop/setup-5266.log

  ModInfo: vmmon module is not found

  ModInfo: module vmnet is not found

  ModInfo: module vmblock is not found

  ModInfo: vmci module is not found

  ModInfo: vsock module is not found

  ModInfo: vmmon module is not found

  ModInfo: module vmnet is not found

  ModInfo: module vmblock is not found

  ModInfo: vmci module is not found

  ModInfo: vsock module is not found

  / usr/bin/VMware: line 31: 5266 Segmentation fault "$BINDIR" / vmware-modcig - appname = "VMware Workstation" - icon = "vmware-workstation.

  Any suggestions on how to make it work are greatly appreciated.

  Move the/usr/lib/vmware/modules/binary in the directory precompiled binary modules. Then the startup script will try to compile the corresponding modules for your kernel.