Cannot open my .psd of Lightroom after update

Similar Questions

• Cannot open RAW files in CS6 after update

  Hi all

  I have Photoshop CS6 and have been able to open my Raw D4 files without any problems using the plugin Camera Raw version 7.1.

  Yesterday, I upgraded my Mac OS Snow Leopard in Yosemite (a big jump I agree) and updated to the latest version Photoshop but also install Adobe DNG Converter 8.8.

  I apparently still uses the same version 7.1 plugin as I always have but I am now is no longer able to open RAW files in Photoshop because it displays a message saying "unrecognized file" when I try to open them.

  I jumped too many updates? Updates of Photoshop CS6 leave me unable to open RAW files? Am I pushed down the road CC?

  Anyone would offer no help at all because I have a wedding to change, but can't open any files! Stress!

  I backed up my system through Time Machine before I did the update, but I'm not sure if I restore that I will still have a Yosemite OS running.

  Any help or advice is really appreciated.

  Thank you very much.

  Phil

  Camera RAW should be at version 8.8 for CS6

  Adobe - Photoshop: For Macintosh

  Adobe - Adobe Camera Raw and DNG Converter: for Macintosh

• Cannot open my iphone more 6s after updating to ios 10, gorgeous itunes logo

  iPhone more than 6 s has been supplied with itunes logo can not open more

  Did you upgrade to ios 10 via OTA?

• Cannot open disk by double-clicking after Windows update

  Cannot open the drives by double clicking

  I use windows 7 and after that windows update today (KB2454826 and KB2419640), impossible to open the drives by clicking twice. However, I can open the discs in a right-click then click "open in a new window.

  I did a full scan.

  Hi Oxbis,
   
      
  1. what happens when you double-click on the HARD drive?

  I suggest you to install the updates one by one on your computer in a clean boot state, and check if the problem reappears.

  Download and save the Setup on your desktop package and try to install the same one by one and check what update is causing the problem.

  To do this, you must enter the number of the Windows Update in the search field in the link provided below.

  Link Download Center

  http://www.Microsoft.com/downloads/en/default.aspx

  Refer to KB2454826:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=ddafd2cb-022c-4235-a644-426ae6b6d36f

  Refer to KB2419640:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=3dfd4f1c-e7a5-4686-8d2c-b7a5a53c5333

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Cannot open my files money 2005 after replacing the hard drive

  Hi, I had to replace the hard drive in my computer and now I am unable to open my money (Version 2005) files. I get an error message indicating "Money cannot locate C:\~~~ or cannot open it, possibly because it is a read-only file or you are not allowed to change it or your hard drive, it is write protected etc.» I tried uninstalling and re-installing the money, but it has not solved the problem. The problem may be to do with the regional settings during installation of money, but when I re - install the money it is not giving me the option to set the perameters during the installation process for a reason any. My OS is XP Home edition Service Pack 3. How can I solve this problem?

  So your real problem is not that the files are missing or read-only, but that the money does not recognize the format the files are in.

  Even if you reinstalled Money, maybe you don't have also downloaded and installed some updates have been released for your version.  See http://support.microsoft.com/kb/320193:

  If you are using Microsoft Money 2005, and you receive this error message after you have reinstalled Money, the behavior may be caused by not having money is not all installed updates.

  See methods 4 and 5 in the article.

  If this does not help, Veritas Aquitas had the right answer: ask in the forum of the money:
  http://social.Microsoft.com/forums/is/money/threads

• Microsoft Money 2004 cannot open my previous .mny file after you have reinstalled my PC!

  I used a .mny file with my MS Money 2004 without problems.

  After having reinstalled my PC (Windows XP) and reintall with the same version of money, when I tried to open my file it asks for my password but delivers so the following error (after trying to convert the file!): "money cannot locate 'path\file.mny' or cannot open, possible because this is the file read-only or you are not allowed to change or your hard disk is write protected".

  Needless to say, none of these conditions are met. I tried to restore from a backup file, but the error was just the same.

  His face wit agonizng this kind of problems in Microsoft products.

  Can someone help me please?

  
  

  Francisco

  14.0.120.805 is no money 2004 Money 2005, and must be updated to 14.0.120.1105 if your old file is to open.

  Right click on the shortcut to launch the money and select run as administrator. You need an update online at 1105 and this will allow money to install it.

• Cannot open the download of Lightroom 6 purchased from B & H Photo.

  Can't open the download of Lightroom 6 purchased from B & H Photo-'cannot be opened because the identity of the sponsor cannot be confirmed. Have 5 Lightroom on my IMac computer.  Thank you

  It is the function of Apple OS X kick guard to protect your computer from malware.

  Right-click on the file and choose open from the menu to work around the Gatekeeper.

  How to open the applications of a developer not identified in OS X Lion mountain | IVous (also applies to the OS X Yosemite)

• Menu start cannot open or pane of Notification after system restore

  I think I might have discovered what caused my problem with opening the menu start before. I had an operation system restore and now cannot open the start menu or the notification pane. I tried to cancel the system restore, but that did not help. Does anyone know how to fix this without using the Windows restore feature? I tried editing the registry found here, but it did not work. The haptic feedback that happens by pressing the soft Windows button on the front of the computer worked again (because it is not this worthless), but the start menu still does not open.

  Hello

  Thanks for posting your question on the Microsoft forums.

  I understand that you are in a frustrating situation because you are facing problems with access to the start menu in the Windows 10 Technical Preview 9926 build. Please provide the following information to help you in a better way.

  1. do you get an error message when you try to access the Start button?

  2. What is the brand and model of the computer?

  I suggest you to refer to the suggestion of Sharath Srinivasa from the following link and check if you can access the start menu.

  http://answers.Microsoft.com/en-us/Insider/Forum/insider_wintp-insider_search/start-menu-doesn

  I hope this helps.

  Please post back with the State of the question and we will be happy to help you further.

• Why can't I open my camera with bridge after updating my Mac with Mac was last updated?

  After updating my Mac with the latest Mac updates, that bridge will not read my camera when it is connected even when I try to refresh the picture towards the bottom of the charger?

  Have you tried recommended workaround here Bridge and El Capitan ?

  ~ Assani

• Cannot open the PSD or TIFF in Camera Raw

  I made a photo in HR Pro, and I want to work on it. I saved it as a .psd and also as a .tif, but I can't open the .psd or .tif the in Camera Raw? If I save it as a. Jpg I already lose quality... ?

  Title of the message was edited by: Brett N

  Ghislaineke wrote:

  Is it possible that a file is too big?  I just opened a little picture, without problem, I've saved as a tif. Who can not be opened is 233 MB!

  What is a multilayer file by accident?

  Camera Raw does not open files multilayer.  Period.

• No tab transformation of lightroom after update.

  I've just updated to the latest version of lightroom cc and I still don't have a transformation on the side Panel tab. I am a photographer of architecture, so I was happy using the guided vertical feature. Any guidance would be greatly appreciated!

  El capitan, like all the latest versions of Mac OS X number is 64-bit only, so it must be. You just need to install Lightroom CC creative cloud app. Then, you will also need to make sure to start the right program. Installation of LR CC removes the old enough now LR 5.7.1 and the icon in your dock will still refer to the old version in your Applications folder. You can open LR CC of the PPA for CC and then control click (or right-click) on the new icon for Lightroom that bounces in your dock and select "keep in dock" If you have a shortcut in your dock that is easy to find. You can get rid of the icon in your dock for LR 5 after that.

• Cannot open the 5.3 Lightroom Catalog. Download «...» It is not writable and cannot be opened"message.

  Hello world

  I'm having a problem opening a lightroom catalog. I get a message "Lightroom can't use the catalog because it is not writable and cannot be opened.

  The catalogue and thousands of RAW files are stored on an external drive.

  Here are the steps that caused the problem in my view:

  1 has worked with the catalog on my laptop. Disconnected the disk without closing first Lightroom (big mistake).

  2 connect the external hard drive on desktop PC and did extra work. Closed Ligtroom (office) and disconnected the disk.

  3 reconnect the drive of the laptop while original catalogue is always open (see #1 above). Clicked on an image at which point Lightroom crashed and closed by itself.

  The problem now is that the catalog opens is no longer on computers. Any attempt to open the results in the message "Lightroom can't use the catalog because it is not writable and cannot be opened. There is no lock or log file that can be deleted, just the lrcat file and tons of files with preview of the data.

  I hope this isn't a lost cause and I can still recover the catalog. There are 2 work days.

  Thanks in advance for any help/advice!

  Ok. I found a solution. As Ligthroom catalog is a SQLite database, you can use a database tool to fix it. Just download SQLite www.sqlite.org for your OS (Windows 7 in my case) and unzip into C:\SQLite for ease of use. Copy your catalog corrupted the C:\SQLite file as well as to keep things simple.

  At the command prompt start > run, type 'cmd' and press ENTER. This opens the command prompt where you will need to run the following commands:

  1 cd sqlite

  2. echo .dump | SQLite3 yourcatalogfilename.lrcat > tempcatalog.sql

  3 sqlite3 - init tempcatalog.sql newcatalogfilename.lrcat

  After the execution of line 3, you may or may not see error messages. No worries, it simply truncated faulty records that is what causes the catalog to crash.

  Now, copy the newcatalogfilename.lrcat into your lightroom catalog file and run it. You should be able to get things up and running to where you left, or to the point where original Lightroom Catalog has been corrupted in first place.

  I hope this helps. It took me a few hours to find a solution, but it saved me at least 2 days of work. Original credit goes to the author of the article according to http://www.simplyness.com/more-photography-tips/recover-corrupted-unrepairable-lightroom-3 - catalog - with - sqlite.html. It seemed to have worked for Lightroom 3 and still worked for Lightroom 5.3 in my case.

• CANNOT IMPORT PHOTOS/CONNECT TO MAC AFTER UPDATE IOS10

  Try to import photos or videos of my iphone 6 s to my macbook pro 09. Before the update to ios10, I had no problem doing this. I have chosen to APPROVE this computer, when the notification appears on my phone. Now, here's the problem, I get this message on my computer when you open iphoto and image capture. "Pictures on the Filmstrip on"iPhone"cannot be imported because the iPhone is locked with a password or read." I don't have a password well. I even created a new phone password just to see if it would work, and he never even gave me a chance to enter one. Tried to turn the phone on/off switch, unplug the power cord, reopening of image capture programs. Do not know what is happening since this new update to ios. Any ideas?

  Ditto for me, picture see the iphone IOS 10.0.0.1 as a player and there display "no name". Any help?

• Cannot hear or talk on calls after update

  I've updated my phone this morning and now I can't hear or talk on calls.   Does anyone else have this problem and if so how do solve you?

  Hi zoefromglasgow,

  Welcome to the communities of Apple Support! I'm sorry to hear you're having problems with your iPhone after a recent update. If you continue to have problems with making/receiving calls or talking/hearing by the receiver, you will find the troubleshooting steps in the following articles useful:

  If you cannot make or receive calls on your iPhone - Apple Support

  If you do not hear a person on an appeal or a voice message or if the sound is not clear on your iPhone - Apple Support

  Get help with microphones on your iPhone, iPad and iPod touch - Apple Support

  Concerning

• Cannot open the secondary an executable after upgrade 2009

  I have a request that I had built in an executable in LV 8.6 open successfully several sub-panels using calls to the VI server. I use the App.Kind property to programmatically determine if the application runs in the system development or as an executable file. In both cases, I first use the Reference.vi Application open to get a reference to the instance of localhost, then I pass this reference to the Open Reference.vi VI, as well as the path of the VI. In the case of development system, I pass the absolute path to the VI to be opened in secondary school; in the executable file, I just pass the name of VI. Since each Secondary VI is included in the executable version (in the.) EXE file; always included), RTE has never had any problems finding files VI and by opening the sub-panels.

  However, after the LV2009, my executable update can't find the screw more. I checked they are all designated as "Still included" in the specification to build, and I rebuilt the executable several times, trying different possible paths (absolute and relative) to try to coax the RTE to find the necessary files. But everything I try it, still no luck. I'm still stuck with error 7 - file not found.

  Are there known issues with calls to the server LV2009 and VI in the executables? Does anyone have any ideas as to what could have changed that a running executable to screw would build between versions 8.6 and 2009? I would be very happy to help.

  Maybe this will help:

  7 error when launching my executable generated in LabVIEW 2009

  http://digital.NI.com/public.nsf/allkb/EEE8A5650DAC28558625762F0070A384

  Steve