Similar Questions

• Cannot open reports ACS 5.6

  Hello

  When opening reports in ACS 5.6 I poster a blank page. I use IE 11.0.14 and Java 7 update 17 version. Content of Java is enabled in the browser.

  Any ideas why its failure? I don't see others having the same problem...

  Hello

  I had the same problem. I upgraded from ACS 5.4 (latest Patch) to 5.6 (latest Patch).

  Could it be, that the ACS 5.6 needs Flash to reports Page? (ISE needs Flash, and the new reports Page looks a lot like ISE) Flash is disabled on our platform remotely and on the site of the customer because of security concerns.

  @frodestra: you have active Flash?

  Also, I rebooted GBA surveillance and tried different browsers.

  Best regards

  Michael

• Oracle 12 c not not opening Report Builder

  Hi all

  I'm installing Oracle 12 c forms and reports.

  For me report generator does not open.   It throws error as ca.dll not found.

  and I started the report server using startManagedWeblogic WLS_REPORTS

  when checking the url http://localhost:9002 / reports/rwservlet/showjobs ?

  It shows error like REP-52266: the current report server

  How to solve these problems?

  Thank you

  Su.GI

  I think that you should start the rwbuilder.bat not find files exe for rwbuilder.bat file and double click it it will start the generator of reports for you.

  After you have started all the below

  startNodemanager,

  startWeblogic,

  startManagedWeblogic WLS_FORMS,

  startManagedWeblogic WLS_REPORTS

  Step forward

  Example of

  1 - run wlst.cmd/wlst.sh ORACLE_HOME/oracle_common/common/bin

  2 - connect on AdminServer.

  Connect ("WebLogic", "weblogic_password", "hostname:7001")

  3 run the following command from wlst.

  createReportsToolsInstance (instanceName = 'reptools1', 'AdminServerMachine' = machine)

  B. create the stand-alone reporting server

  Example of

  1 - run wlst.cmd/wlst.sh ORACLE_HOME/oracle_common/common/bin

  2. connect to the AdminServer.

  Connect ("WebLogic", "weblogic_password", "hostname:7001")

  3 run the following command from WLST.

  createReportsServerInstance (instanceName = 'rep_server1', 'AdminServerMachine' = machine)

  This will create a new independent Reports Server named "rep_server1".

  4 - launch the report server.

  Note: The examples use ports and the default credentials.

  C. start / stop the stand-alone reporting server

  Go to the DOMAIN_HOME/bin folder and issue the following commands:

  startComponent.cmd or startComponent.sh [name of report server]

  or

  stopComponent.cmd or stopComponent.sh [name of report server]

  Then follow my approach I gave above.

  I think your problem will be solved.

• Cannot open reports in the form of url using web.show_document

  Hi experts,

  I'm trying to access the oracle forms to oracle reports. port 9001 turn my forms and my report has been set up in port 9002.

  While trying to open the report using web.show_document (), the web page opens with the port 9001 and returns a 404 error. But when I change the port number 9002 in the url it opens the report sucessfully.

  Please find the link forms and reports below:

  http://10.180.218.158:9001/forms/frmservlet? config = kvb11g

  http://10.180.218.158:9002 / reports/rwservlet/getjobid97? Server = rptsvr_mohadam-in_adam2unst

  I tried to change the machine name of the ip address in theforms.conf and reports_ohs.conf as suggested in the link below. but it dint work out.

  URL-

  https://forums.Oracle.com/thread/1105289

  http://prasadmadhasi.com/2011/11/19/changing-presentation-services-port-number-in-OBIEE-11g/

  My reports_install.properties is given below,

  Properties of installation #Reports

  #Fri Oct 13 16:10:59 IST 2013

  WLS_USER = weblogic

  USE_REPORTS_BUILDER = true

  OHS_COMPONENT_NAME = ohs1

  REPORTS_MANAGED_WLS_PORT = 9002

  Server_name = RptSvr_MOHADAM-IN_adam2unst

  REPORTS_MANAGED_WLS_HOST = 10.180.218.158

  FORMS_CONFIGURED = true

  ORACLE_INSTANCE_NAME = adam2unst

  REPORTS_APP_DEPLOYMENT_DIR=C\:\\Oracle\\Middleware\\user_projects\\domains\\kvbdomain\\servers\\WLS_REPORTS\\tmp\\_WL_user\\reports_11.1.2\\uxabaw

  INPROCESS_SERVER_NAME = RptSvr_MOHADAM-IN_adam2unst

  MANAGED_SERVER_NAME = WLS_REPORTS

  OHS_PORT = 8891

  DOMAIN_HOME = it\: / Oracle/Middleware/user_projects/domains/kvbdomain

  COMMON_COMPONENTS_HOME = C\:\\Oracle\\MIDDLE~1\\ORACLE~1

  ORACLE_INSTANCE = C\:\\Oracle\\Middleware\\adam2inst

  REPORTS_APP_CONFIGURATION_DIR=C\:\\Oracle\\Middleware\\user_projects\\domains\\kvbdomain\\config\\fmwconfig\\servers\\WLS_REPORTS\\applications\\reports_11.1.2\\configuration

  OHS_HOST = MOHADAM - IN .in .oracle .com

  Domain_name = kvbdomain

  ORACLE_HOME = C\:\\Oracle\\Middleware\\Oracle_FRMHome

  USE_OID = false

  REPORTS_APP_VERSION = 11.1.2

  USE_SSL_FOR_APP_LDAP = false

  INSTALL_MODE = deployment

  SSO_CONFIGURED = false

  Looking forward for your help.

  Kind regards

  SYL

  Hello

  It's the forum space

  Developer SQL (not for general questions of SQL/PLSQL)

  Please mark this thread as answered and post your issue in the reports

  Concerning

  Marcus

• Cannot open reports BI in OIM 11 g r2 ps3

  Hi all

  As you know, we can run the verification of identity (some reports) of console IOM itself.

  For this report, I enabled the identity Audit characteristics Set availability propertiy (make TRUE).

  Then I can enter tab acquiescence of Identity Manager.

  There are 3 options: Certification of identity, reports, identity verification.

  I enter Certification of identity identity verification.

  When I click on "Reports", an error occurs:

  Diagnosis in and out log, error message is:

  < WARNING > < oracle.iam.ui.common.model.certification.bipwebservice71.proxy.ReportService_Service > < BEA-000000 > < could not read the URL wsdlDocumentLocation WSDL definition: null >

  How can I solve this problem?

  

  Hello

  We do not have upgrade environment.

  We initially put PS3.

  When I control PIF url in EM, the url is correct.

  So, I think, we don't have to deal with the evolution of PS2 to PS3.

  Thank you.

• Report Builder is not not as forms of fusion middleware &amp; installation reports

  Dear all,
  
  I installed oracle fusion middleware forms & services ofm_frmrpts_win_11.1.2.1.0_64_disk1_1of1 report.
  
  generator of form is there, but the Report Builder is not there? Why? where is the generator of reports?
  
  Kind regards.

  Hi Maahjoor,

  Try from Report Builder using the rwbuilder.bat in the directory % ORACLE_INSTANCE%\config\reports\bin\.

  If you still have questions to
  (a) save the file rwbuilder.bat to %ORACLE_INSTANCE%\config\reports\bin\
  (b) now change file rwbuilder.bat the file % ORACLE_HOME%\bin\rwbuilder.bat, by manually hard code the correct paths for:

  $$Instance.directory$$\config\reports\bin\reports.bat
  $$Instance.oracle_home$$\bin\rwbuilder.exe

  In other words, if your instance is C:\Oracle\Middleware\as_inst1, then change the rwbuilder.bat to take into account:
  C:\Oracle\Middleware\as_inst1\config\reports\bin\reports.bat
  C:\Oracle\Middleware\as_inst1\bin\rwbuilder.exe

  (c) and then re-run the file updated the rwbuilder.bat to the % ORACLE_INSTANCE%\config\reports\bin\.

  If it still does not work...
  Follow these metalink 2 ID, they will be useful

  * REP-50125 "rwbuilder.conf:java.lang.NullPointerException" try to Open Report Builder [Article ID 1532120.1] *.

  * 11g on MS Windows error generator with: REP-50125 [Article ID 1059638.1] *.

  Concerning
  Fabian

• New blank tab window cannot open file, new tab. In Tools/Options/tabs o open new windo w in a new tab?

  New blank tab window cannot open file, new tab . In Tools/Options/tabs I checked open new window in a new tab?

  The "Ask Toolbar" is probably originally in the version of Firefox 3.6.13. Disable this extension or uninstall it.

• Using Reporting SERVICES report server cannot open a connection to the report server database in SQL server 2008 R2 sp1

  Hello

  I'm running Reporting SERVICES Version 2007.0100.1600.022 ((SQL_PreRelease). 080709-1414 in Visual Studio 2008 with Microsoft SQL Server 2008 R2 Express Edition with Advanced Services (64-bit) on Windows NT 6.1 SP1.)
  Everything seems to work fine except that I can't deploy: "the report server cannot open a connection to the report server database."
  Connection test ReportServer as OK in the Configuration service report manager and Visual Studio. Run reports in Visual Studio against ReportServer and my other databases.  Deployment fails on a report of VM. Remote access is enabled in the firewall, pipes is enabled in configuration Manager SQL server, the permissions for all access in Windows.
  The error in the log file of report Service:
  Library! WindowsService_1! 12ac! 09/23/2012-21: 05:12: e ERROR: ServiceStartThread: Exception caught during the startup of service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerDatabaseUnavailableException: the report server cannot open a connection to the report server database. A connection to the database is required for all applications and treatment. ---> System.Data.SqlClient.SqlException: a network-related or instance-specific error all by establishing a connection to SQL Server. The server is not found or inaccessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - error Search Server/Instance specified)
  Any ideas?
  Thank you.
  -Phil

  Just, I solved the problem I had.

  It turns out, there, there were two questions... first concealing the second.

  SQL Web browser has not been activated.  solution: in properties SQL server configuration manager, transformed the startup to automatic mode and activated the service.

  Microsoft Visual Studio project property targetdatasourcefolder had a server name that precedes the name of the folder. Removed the name of the server.  This works.

  Everything unfolds right now.

• error LNK1181: cannot open input file "... \..." \.. \build\win\objR\PMRuntime.lib'

  I have create a new Plugin.

  But happen error LNK1181: cannot open input file "... \..." \.. \build\win\objR\PMRuntime.lib'

  Why?

  I looked at the project and have it fixed with success, but unfortunately I can't send that overall because of the way the project was sent initially. Most absolute paths are the paths used in the project file and that's your project needs changes to much space when focused on a new machine. I'll give you advice on how to solve your problem and how to improve the project is configured for better portability.

  How to solve your problem.

  1. Remove $(MODEL_PLUGIN_LINKLIST) from the list and it will work well for you. The wrong way is written in the sdk file attachments that are included in your file accessories
  2. After taking the first point, you will again have a binding error, to solve, it adds ASLSupport.lib to the additional dependencies in the section of the linker.

  How to set up a project in a more portable way

  1. You should avoid using absolute in several locations paths, because when you move the project to another machine, you will need to change the paths to all these places
  2. Even using relative paths does not solve the issue properly, because in this case you must place the project from a location on each computer so that it works correctly. This is the reason why it was not $(MODEL_PLUGIN_LINKLIST) for you. The Adobe sdk samples use relative paths, so move the project so that by using their configuration fails if the relativeness of the road is not maintained
  3. In order to be totally portable, we should make use of macros and define them in one place. So that when you move the project, change the paths in this single file solves everything. An example of this is how you set the id_sdk_dir macro in your file attachments.

  Hope these points help you to solve your problem and put in place the project in a better way.

  -Manan

• "Lightroom_5_LS11_mac_5_7.dmg" for Mac update my Lightroom 5.6 (build 974614) but when I try to open it I get the error message "Lightroom_5_LS11_mac_5_7.dmg cannot open the disk image is not recognized. I am running OS 10 of Yosemite

  I downloaded "Lightroom_5_LS11_mac_5_7.dmg" for Mac that allows to update my Lightroom 5.6 (build 974614), but when I try to open it I get the error message "Lightroom_5_LS11_mac_5_7.dmg cannot open the disk image is not recognized. I am running Yosemite OS 10.10 on a Macbook Pro (retina, 13 inches, end 2012 with 2.9 GHz Intel Core i7 processor).

  Vk2mh looks that the download was not complete or corrupt.  When you download the update from?  Have you tried to download it again?

• Vision Builder HAVE: (Hex 0xFFFA960C) cannot open the record of inspection.

  I HAV built an inspection in the generator of vision for automated inspection (the code, the image and inspection is provided in the attachment)
  but my program cannot open the inspection is to launch an error: error-354804 occurred in VBAI Interface - open Inspection.vi.

  I am using the NI 1742 smart camera and run the program on the remote target

  I don't get the reason for this error.

  If smbdy can solve... Please...

  I think the problem is that the path you specify is invalid for a goal of RT. On the RT, the 'path' should just be the name of the inspection. If you look at help for the VI open Inspection, it says to use the get target Inpections VI to see what paths for all controls are... sometimes the path is a name of numbers subsequent, though it may not be what you think.

  Hope this helps,

  Brad

• Cannot open - Security Service Center

  original title: Security Service Center

  Cannot open security service center

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------

  Some antivirus/security products may cause this error. McAfee, Norton, Windows Live OneCare.
  ThreatFire are some. What antivirus/antispyware/security products you have on machine now. And
  who have you ever on it, even if you have uninstalled them. (These leave the remains that can cause some)
  strange questions.)

  Check the default services and dependencies to ensure that they are running.
  http://www.blackviper.com/WinVista/services/Security_Center.htm

  Security Center not related anti-virus or firewall State correctlyhttp://www.winhelponline.com/blog/security-center-not-reporting-anti-virus-or-firewall-status-correctly/

  How to fix Vista Reporting incorrect information Security Center
  http://www.Vistax64.com/tutorials/195736-Security-Center-not-reporting-correct-information.html

  How to disable or enable the Security Center in Vista
  http://www.Vistax64.com/tutorials/67737-Security-Center.html

  This thread might help as it might be a permissions problem.
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3d2049ae-4581-439b-8E15-3f603f5c60f0/

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Driver power state failure; BSOD; Cannot open the minidump files

  Two weeks, my computer with Vista has started giving me a BSOD with status message driver failure.  I found the minidump files, but cannot open them.  The BSOD usually occurs after the computer has entered a sleep or hibernation.  I have not added any equipment to the computer and Norton 360 when I scan computer everything seems OK.  It is August 10, 19, then 23, also.  Don't know what the cause of the problem. Is there general reasons that could cause this or is - associated virus or what?

  Thank you

  Hello

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 answers (now 4).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  You can use BlueScreenView to stick the BSOD info in a message here.

  NOTICE - report HTML all THE ELEMENTS or right-click on a BSOD line and select the same. Then, copy and
  Paste the lines in a message here. Make sure and check the file name section. Also check the time
  in MyEventViewer for more information as possible.

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• SpeedGrade CC cannot open first Pro CC projects?

  Hello

  My Speedgrade CC cannot open first Pro CC projects because it is said that Premiere Pro is a newer version, but both are up to date.

  If that's what you get, the CC app is lying to you. It happens... happens to me also. Check your numbers... lower left of the "Help-> about" screen in PrPro, lower left corner of the top tab of the Panel preferences-wrench, 'About', in SpeedGrade. You may need to scroll down in the Panel of Sg.

  Here's what the current builds are:

  PrPro: 8.2.0 (65)

  SpeedGrade: 8.2x51

  Legacy: 13.2.0.49

  Hearing: 7.2.0.52

  You're probably showing a lower number of SpeedGrade. If so, you need to try a few things...

  (1) open the app Abobe creative cloud on your desktop, log out, & sign... that could fix things it will appear you have an available update. If it isn't...

  (2) download the Adobe CC Cleaner App...

  Adobe CC Cleaner App

  https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  It lets uninstall THEM and clean all the preferences/cache for the creative cloud app AND SpeedGrade. Then download a new copy of the creative Cloud application, log in and download the new copy of SpeedGrade & install.

  Neil

• Software update new cannot open applications

  Model: Macbook Air 6

  Recently updated software (Mac OS X 10.10.5)

  Restart, but now I "problem report for Finder" on the loop. Says "Finder close unexpectedly. This report will be sent to Apple. "

  I click OK but the message just re-.

  Cannot open the application Photo booth, FaceTime, or even the App Store, Mail, Notes, Google Chrome :/

  Only things running are Safari and iTunes.

  I have no idea what I did wrong. Desperately need help!

  Hello mia_sn,

  Thank you for using communities of Apple Support.

  I see from your post that you have a problem with the Finder leave unexpectedly, and that causes a problem with the opening of some applications. I know how it is important to ensure that you have access to all your applications. I have a couple of things I want you to try.

  First of all, try to start your computer in safe mode. Safe mode (sometimes called secure boot) is a way to start up your Mac so that it performs some checks, check your startup disk and prevents certain software from loading automatically or opening. The following article will help you start in safe mode:

  OS X Mavericks: start in safe mode

  Once you're in safe mode, test and see if you can open these applications. After that, give your computer a fresh reboot and then log in normally and test again.

  If you continue to have a problem, try to test in a new user. Test in a new user account can help circumvent the problem of your main user account. This article will help you set up a new user:

  OS X Mavericks: set up users on your Mac.

  Once you are in a new user account, see if you get the same result when opening these applications.

  Best regards.