Cannot open several files at once

Similar Questions

• Open several files at once

  I have a user who is trying to open several files at once in IllustratorCC. When you select several files and right click-> open, it opens to a single file. If she double clicks on a file so that it has a file open in illustrator, nothing happens. The only way she found to open several files is to go to file-> open-> Browse to the location for each file. It's your time. Is anyway to allow to quickly open multiple files similar to how older versions of Illustrator has done?

  It should work the way it does, unless something is broken in CC

  try these other two options

  1. Select all the files and press 'Enter', they should all open

  2. Select all files, and then press the 'Open' button in the toolbar of the browser

  

• I can't open several files at once in Photoshop 5. Any suggestions?

  I just install CS5 on my Mac. If I drag multiple files Photoshop to Photoshop icon in my dock only open on my desktop. When I close all the files I tried to open the flash on the screen as they close too, after having been unavailable at this point. Any advice, short to wipe the drive and reinstall everything from scratch?

  Speaking of zero, I have a great record of work available.

  Are you sure they close and are not just rooted tabs?

  

• Error message - Windows cannot open this file after downloading program

  After several days in offline mode, I went online to update Microsoft Security Essentials and click on analysis complete.  It took an hour.  After that, I found that all my programs were virgins, almost of all of the standard microsoft Microsoft Security Essentials is.  I tried to download it again, plus others such as adobe acrobat, but all said "windows cannot open this file".  I asked help from Microsoft but received access denied.  I feel like an illegal immigrant, as all the doors were closed.  What does that mean?  My OS would be illegal?  It is Windows XP and was purchased new in the retail price in 2004 and has only once been out of my hands when I sent it repairs and have 2 GB ram added.  Any ideas?

  Hello

  1. What is the full and exact error message?

  Try the steps from the following link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/when-trying-to-open-desktop-icons-get-message/e75fd1c3-F772-E011-8dfc-68b599b31bf5

  I hope this helps.

• Click on the link-get "Windows cannot open the file" select a program?

  After clicking on link get "Windows cannot open this file" have to manually "selecta program programs installed" Firefox appears as a choice and I double-click. How can I solve this problem / eliminate these extra steps
  ? Thank you Joe
  I am running Windows XP, MS office Outlook 2007

  Is it a link in an e-mail message in Outlook? This problem arises from time to time.

  While Firefox can usually set himself as the proper application to open the URL, you click in other programs, settings are sometimes blur or do not take. This article has tips to solve this problem: setting Firefox as the default browser does not work - what to do. Anything there help?

  If the problem persists, is there something special about how you start Firefox? For example, you have this launch in a security 'sandbox' or virtual machine? You have all the command-line options set to allow several simultaneous sessions of Firefox, or call the Profile Manager? If none of this sounds familiar to you, the answer is probably not.

• Cannot open .exe files and the desktop icons appear as the white sheet

  Original title: Iopening programs

  Cannot open exe files. Removed several programs and all the desktop icons changed to a white sheet with a picture of a computer. Get error install disc insert message "for HP photo and image to reload.

  Hello

  ·         What are the programs that you have removed from the system?

  Method 1:

  I suggest you follow the steps mentioned in the article below.

  Cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP-based computer

  http://support.Microsoft.com/kb/923077/en-us

  Method 2:

  I suggest you do a system restore to the point when the system worked very well and see if the problem is resolved. Follow the steps mentioned in the article below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084/en-us

  Method 3:

  Perhaps, your user account is damaged. I suggest to create a new user account and check if the problem persists. Follow the steps mentioned in the article below.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783/en-us

• Cannot open PDF files on Web sites, or when it is attached to the email!

  Hello
  My computer is running Vista and I had this problem for the last 2 years! I can only receive the PDF sent by one of the companies I work for. I can't open most PDF files sent by attachment or all the files on Web sites. I have Adobe 9 and Foxit Reader and it does not work with either. I tried to re - install Adobe and still no luck. With Foxit Reader that I can manage to open the PDF files sent from the company I mentioned earlier, but that's all. I would really appreciate some help... Thank you very much! :) x

  Try this: uninstall all the software that you have to display the PDF documents. Then try to open a PDF file. You should receive a message that "Windows cannot open this file". If you get the message that the file is "corrupt" or "not supported" means that you have another program or display of PDF files.
  Once you receive a message that "Windows cannot open this file" download and install the latest version of Adobe Reader (9.3).

• Cannot open DOC files that are sent to me. I have wordpad and Notepad on my computer but you do not have Microsoft Office

  original title: DOC files

  Cannot open DOC files that are sent to me. I have wordpad and Notepad on my computer but you do not have Microsoft Office. Most of the time, I get a screen that says 'open' or 'save' the file and when I click on 'Open', this message disappears. Sometimes it opens, but the message is completely scrambled with letters and symbols.

  Cannot open DOC files in wordpad or Notepad. you will need a more advanced software suite. Try OpenOffice.org - it's free, and it supports the DOC format. But the best solution is to get Microsoft Office once and for all.

  Download OpenOffice.org: http://download.openoffice.org/contribute.html?download=mirrorbrain&files/stable/3.2.1/OOo_3.2.1_Win_x86_install-wJRE_en-US.exe. Note: Click on the link at the bottom that says "http://download.services.openoffice.org/files/stable/3.2.1/OOo_3.2.1_Win_x86_install-wJRE_en-US.exe" to download the program.

  This should solve your problem,

  Rifdhan

• Error: Cannot open the file: 1

  [INFO]              Parsing of the command line options
  [INFO]              Bbwp.properties analysis
  [INFO]              Validation of archive WebWorks
  [INFO]              The analysis of config.xml
  [INFO]              The application of filling source
  [INFO]              Compiling applications WebWorks
  [INFO]              Packaging of the record bar
  Error: Cannot open the file: 1

  Once I rebooted my machine it worked... But I dint knew why this error occurred

• error LNK1181: cannot open input file "... \..." \.. \build\win\objR\PMRuntime.lib'

  I have create a new Plugin.

  But happen error LNK1181: cannot open input file "... \..." \.. \build\win\objR\PMRuntime.lib'

  Why?

  I looked at the project and have it fixed with success, but unfortunately I can't send that overall because of the way the project was sent initially. Most absolute paths are the paths used in the project file and that's your project needs changes to much space when focused on a new machine. I'll give you advice on how to solve your problem and how to improve the project is configured for better portability.

  How to solve your problem.

  1. Remove $(MODEL_PLUGIN_LINKLIST) from the list and it will work well for you. The wrong way is written in the sdk file attachments that are included in your file accessories
  2. After taking the first point, you will again have a binding error, to solve, it adds ASLSupport.lib to the additional dependencies in the section of the linker.

  How to set up a project in a more portable way

  1. You should avoid using absolute in several locations paths, because when you move the project to another machine, you will need to change the paths to all these places
  2. Even using relative paths does not solve the issue properly, because in this case you must place the project from a location on each computer so that it works correctly. This is the reason why it was not $(MODEL_PLUGIN_LINKLIST) for you. The Adobe sdk samples use relative paths, so move the project so that by using their configuration fails if the relativeness of the road is not maintained
  3. In order to be totally portable, we should make use of macros and define them in one place. So that when you move the project, change the paths in this single file solves everything. An example of this is how you set the id_sdk_dir macro in your file attachments.

  Hope these points help you to solve your problem and put in place the project in a better way.

  -Manan

• How to open several files in ACR without bridge

  Is there a way? but not a single file, several files at once.
  Is it possible to open LR as bridge? (Some may wonder why I want to open if I use LR because ACR is similar to LR)

  There is no provision to do so. You are right, however. You can select multiple images in Lightroom and apply the corrections here. But when images to Photoshop Lightroom, Camera Raw only serves to interpret the Lightroom adjustments. Camera Raw itself does not open. Of course, you can open as smart objects. But only allow you to take individual images in Camera Raw.

• Cannot open JPG files in photoshop, error "could not complete your request because the file is not found.

  Cannot open JPG files in photoshop
  Has anyone ran into this problem? Photoshop worked perfectly in the past and the other day I noticed that I can't open all the jpg files in Photoshop (tried all the usual ways to circumvent the opening problem), I get the error message: "Could not complete your request because the file was not found." I know that JPGs are fine, as they open in other applications. My work-around for the moment, is to open in preview mode before and export as a PDF file, then open the PDF file in photoshop, however, this is not ideal.
  Someone at - it in the case, or have a fix
  Any help much appreciated

  Dan

  Hi Dan,.

  Please install camera Raw from following link: Camera Raw of Adobe Photoshop CC and CS6 Installer

  Once done, open file Jpeg, you shouldn't get the error more.

  Let me know if it helps.

  Kind regards

  Tanuj

• InDesign Mac CC: "cannot open resource file' popup message when loading a feather in my plugin

  We have a pretty simple plugin for InDesign, which we have maintained since the time Pre-cs.  We would wear to CC.  Everything works on Windows and Mac, with one problem.

  The plug-in displays a file save dialog box, which is customized with a couple of additional controls for additional information from the user on the exported file.  As far as I know, there is no way to do it with the InDesign SDK directly, so we do it with code specific to the platform and resources.  Under Windows, we have this by calling GetSaveFileName in the Windows API and by setting a custom resource .rc and "hook" function with OFN_ENABLETEMPLATE and OFN_ENABLEHOOK.  On Mac, until CC InDesign, we asked the function of carbon NavCreatePutFileDialog, with a style file old Pier and an event proc handling kNavCBCustomize and al.  This has all worked for a long time great.

  However CC InDesign on Mac is 64-bit only, and carbon will not work with it.  So, we took the leap in cocoa and put implement with [NSSavePanel setAccessoryView:], where load us a NSView custom from a pen integrated into our bundle of plug-ins.  And it works very well also.  However, when the plugin code call [NSNib initWithNibNamed:bundle:], InDesign CC appears a warning message saying: "Cannot open resource file."  However, the resource (the pen) is obviously loaded correctly.  Thus, the user must dismiss this apparently false alert box before being able to move forward.  Once the alert is dismissed, the NSSavePanel works very well, with our custom NSView.

  I can say that the popup alert just InDesign itself, rather than a subsystem of Mac underlying as cocoa, because he has the title of "Adobe InDesign" and the gray dark background as the rest of the CC of InDesign and the OK button has an orange highlight around it.  It is clearly not a standard thing of Mac as a NSAlert.  And if I do the same calls to [NSSavePanel setAccessoryView:] et al. in a stand-alone application, obviously no this popup appears.

  It seems that somehow our call to load the file Nib triggers some kind of hook in InDesign.  My guess is that it's a hook for InDesign load its own resources, which is hanging by mistake in features our plug-in.

  I tried two approaches to load the Nib enumerated file here:

  http://StackOverflow.com/a/5855561/3207828

  And they both work, the pen is responsible and we can get our NSView to it and use it in the NSSavePanel.  But if we call [NSNib initWithNibNamed:bundle:], or [NSViewController initWithNibName:bundle:], CC InDesign displays the message box as soon as the call to load the pen is made.

  Why InDesign CC showing the message 'Cannot open resource file', and how can it be prevented?

  Thank you

  Dan

  I thought about it.  The problem was the plugin code to create a ResourceEnabler object, which is needed by older versions (CS *) of the plug-in on Mac to locate resources .rsrc for the call of NavCreatePutFileDialog of carbon with the carbon resource custom.   I #ifdef'd out so that the ResourceEnabler object is not created during the generation of Cocoa 64 bit for the CC and the offending message popup no longer appears.

  I do not understand why the ResourceEnabler object is needed for carbon, resources of the plug-in to the top of the stack of the resource, but I do not completely understand why the presence of the ResourceEnabler object would have an effect on a call from cocoa to [NSNib initWithNibNamed:bundle:], which also works fine.

  Note that simply create the ResourceEnabler object does not trigger the popup even if the bundle of plug-in contains no carbon resources to move to the top of the stack.  It's only when I go to load the Nib file that the ResourceEnabler seems to want to get involved and complain that it cannot find anything.

  So if anyone from Adobe is reading this, I would say that set you the ResourceEnabler feature so that it does not interfere with loading crane of cocoa.  It is perhaps best to just do the ResourceEnabler a no - op in InDesign CC.

• "Extraction failure: cannot open output file" error message when installing new drivers

  Hello, I am trying to install new drivers for my HP Photosmart C4385 printer.  I downloaded the complete drivers of features for Windows XP 32-bit, and when I start to install (extract), I get the error message:

  Extraction failed

  Cannot open output file

  And the process ends.  He arrived at about 85% extraction every time.

  No idea why?  I called HP, but no longer under warranty they wanted money, which I think as absolutely ridiculous - not even give me basic support?  Poor, poor customer service.

  Hi GIJeff12,

  Temporarily disable any AntiVirus/Antispyware software.

  Cut the installer on your desktop then click on the Start Menu, click computer, double-click on the C: drive and paste the installler here.  Now try a right click on the installer for your printer, choose 7-Zip and choose Extract the files, and then click Ok.  If the installation program extracts now correctly, follow these steps.  If it does not extract, let me know.

  Disconnect your printer from the PC.  Restart your PC.

  Open the newly extracted folder and double-click the setup application to start the installation (the installation application will probably have the same icon as the original installation software that you downloaded).  Connect the printer to your computer when you are asked.

  If it was a success, re - enable your security software.

  Best wishes

  DP - K

• I just tried to update Firefox to version 9.0.1. Extract of 13%, and then I got an error message cannot open output file. Can you help me please?

  I just tried to update Firefox to version 9.0.1. Extract of 13%, and then I got the error message cannot open output file.

  The file can be uploaded incorrectly. Could you it redownload again from http://getfirefox.com?