Cannot open the IOM sysadmin Deployment Manager console

Similar Questions

• Cannot open the database: TrueSuite Access Manager

  Whenever I try to record fingerprints in TrueSuite Access Manager, I get an error indicating that it was unable to open the database.

  Hello

  Have you tried to reinstall the TrueSuite software?
  I think that the registry is confused upwards or a part of the software is damaged. Who knows.
  But I think that a new installation of software could help to make it work again...

• Cannot open the Adobe extensions even Manager after installation

  I downloaded and installed Adobe Dreamweaver CS6. As I was not able to find server behavior, bond and database options in the drop-down window, I tried to install Adobe Extension Manager CC in my Windows PC. After installation, I am not able to see them in Dreamweaver CS6. I was able to install the CC extensions Manager, but not able to open. Could someone help please?

  CC2015 no longer uses an Adobe Extension Manager of product. That you downloaded is not compatible with your version of DW, even if it is open, it wouldn't help.

  In CC2015, you must install the extensions via third party EM (not available through Adobe), use the creative cloud desktop application, or a command line installation process.

  DMX Zone has an EM you can enter: http://www.dmxzone.com/go/22670/dmxzone-extension-manager-for-dreamweaver/

• Could not open computer management. I m, like__MMC error message cannot open the file C:\WINDOWS\system32\compmgmt.msc

  I am the administrator total privileage still i'm getting the following error...

  MMC cannot open the file C:\WINDOWS\system32\compmgmt.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  I am the administrator total privileage still i'm getting the following error...

  MMC cannot open the file C:\WINDOWS\system32\compmgmt.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  Hey Sandy_Nepal

  read the answer below

  http://www.Winhelponline.com/articles/72/1/error-message-when-you-try-to-open-a-MMC-console.html

  http://www.allpostnews.co.UK/II27/compmgmt%20msc%20error%20messag.php

  Walter, the time zone traveller

• Cannot open Device Manager or services.msc a message box pops up it says "MMc cannot open the file C:\Windows\system32\devmgmt.msc.

  Original title: I can't connect to my wireless network. My convenience store does not work and I can't open the network and sharing Center. I'm sure it's some type of virus. Help, please.
  It says "an unexpected error has occurred. The Troubleshooting Wizard can not continue. "When I try to run the troubleshooter.

  When I try to open Device Manager or services.msc a message box appears, it says "MMc cannot open the file C:\Windows\system32\devmgmt.msc.

  He said also my Defender pro subscription has expired, even if I've just recently added a one year subscription.

  Hello

  You did changes to the computer before the show?

  Method 1:
  Try these steps and check if it solves the problem:
  a. click Start, type cmd, right click and select run as administrator.

  b. at the command prompt, type regsvr32 msxml3.dll , and then press ENTER.

  Method 2:
  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:
  Run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  See the steps in the link and check.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• El Capitan: Cannot open the application "app name" because it may be damaged or incomplete

  Came across this several times. After you initially upgrade to El Capitan 10.11.2, after logging into my main account (admin), I was not able to open applications and received the following error:

  "Cannot open the application name"app"because it may be damaged or incomplete."

  I couldn't open "Activity Monitor", "System Preferences", "Finder" or anything (provided, App Store or other system). The icons will revert to the default application icon. Other users have no problem with the same apps.

  After the panic, I found a solution: go to another admin account, delete the old user account, and then add it again. This version corrects the problem of this user; It apparently rebuilt the user for that user identity information, while leaving their home folder (and preferences, documents, key rings, etc.) only. iCloud information must be re-entered, but it is trivial. Once the user delete and add, I was able to run these applications.

  When I upgraded to 10.11.3, it is the same thing, but to 3 accounts. I managed to solve this problem through the guest account - that is, I was still able to authenticate as an administrator, but I could not open a session and run anything.

  El Capitan removed permissions repair; I think it can be done in the recovery console, but I shouldn't do that.

  No idea why this continues to be?

  Generally to searching for the above error message is specific to applications from the App Store or other, not about things like "Activity Monitor" and "System Preferences."

  You now have this problem?

• Windows 2k8R2 - receiving error when you connect (MMC cannot open the file: C:\Windows\system32\ServerManager.msc)

  Windows 2008 R2 - I just started getting this when I connect, and also when I try to manage the machine:

  MMC cannot open the file:

  C:\Windows\system32\ServerManager.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. This may also be because you don't have sufficient access to the file.

  It always worked before and work for other users simply not me on this particular area. It is a production company, and I need a quick resolution please. Thanks in advance.

  PM

  Hello

  Your Windows is better suited for the public of Windows Server on TechNet. Please post your question in the TechNet Windows server forum.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

• MMC cannot open the file C:\windows\system32\WF.msc

  When I try to open the Action Center, I receive this message. MMC cannot open the file C:\windows\system32\WF.msc

  Hello

  Thanks for posting the question in the Microsoft Community forums.

  According to the description, you get a message of error 'mmc cannot open the file C:\windows\system32\WF.msc' when you try to open the center of the Action.

  We will perform the steps and check.

  Method 1:

  
  Try to access the Windows Firewall configuration through the console Microsoft Management console.
  
  a. click on start
  b. type MMC (right-click and choose Run as administrator)
  c. click on file (in the upper right corner)
  d. click Add/Remove snap-in software component
  e. Select Windows Firewall with advanced settings, in Add Remove snap-ins windows
  f. click Add (clicking ok does not make any changes)
  d. click OK and you should be able to use the settings of the Console 1 window.
  
  Method 2:
  
  If you are able to use the settings of the firewall through MMC, then scan your computer for corrupt system files.

  Perform a SFC scan on your computer. Consult the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information helps. Please reply with the status so that we can help you.

• 9.1 Safari cannot open the page after el capitan 10.11.4 updated updated

  have an imac (retina 5 k, 27 ", end of 2014)

  4 GHz of processor intel core i7

  8 GB 1600 Mhz DDR3

  1 TB of flash storage

  running Safari 9.1 (11601.5.17.1)

  Safari opens but does not open the page - get - Safari cannot open the page - safari can't open the page because the server dropped the connection unexpectedly.

  Journal of the console after repeated attempts-

  

  appreciated all help to solve them.

  Go step by step and test.

  1. turn off the power to the router. Unplug it from the wall. Wait a while.

  Plug it in, back to the wall. Turn on the router. Wait for all lights are light up properly. It will take a while.

  Restart the computer.

  Boot mode safe.

  https://support.Apple.com/kb/PH18760?locale=en_US

  2 remove Caches.db

  Close all windows and close all applications.

  Hold down the 'option' key, then click on the "Go" menu in the Finder menu bar.

  Select 'Library' in the menu dropdown.

  Library > Caches > com.apple.Safari > Caches.db

  Right-click on the Caches.db file and select "move to trash".

  Close the windows.

  Restart and restart Safari.

  3 empty Caches

  Safari > Preferences > advanced

  Tick the box "Show develop menu in menu bar."

  Develop menu will appear in the Safari menu bar.

  Click on develop and select 'Empty cache' in the menu dropdown.

  4. remove the Cookies

  Safari > Preferences > privacy > Cookies and other data from the website:

  Click on the button "Details".

  Delete all cookies except those from Apple, your internet service provider and the banks.

  5 Disable Extensions and test them.

  Safari > Preferences > Extensions

  Uncheck 'Enable the Extension' and test.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button

• IdeaPad Y450 - message 'cannot open the camera.

  I recently bought a Lenovo IdeaPad Y450. There is a problem with the camera. I use the Windows 7 32-bit operating system.

  I installed the drivers and the Lenovo easy Capture software.

  When I check the Device Manager on my computer, the camera is listed under imaging devices and it indicates that the device is functioning properly.

  Other USB devices on my computer work correctly.

  When I open the Lenovo easy Capture software, I get the following message: "cannot open the camera.

  I tried to uninstall everything and do a fresh install, but nothing seems not to solve this problem.

  Do you have any suggestions?

  
  

• Cannot open the illustration. The illustration contains an illegal operand.

  Hi guys

  Need help here, I was working on my case when all of a sudden, it crashed on me. When I tried to open it again, I got this error:

  Cannot open the illustration. The illustration contains an illegal operand. Vertical arrow (car)

  (Grid)

  (LED \(4 numbers\ screen))

  (LED \(2 numbers\ screen))

  (Horizontal arrow)

  (Vertical arrow)

  From "... vertical arrow" go seem the names I gave my instances of the file (maybe wrong here?)

  
  I tried to read a lot of help articles, including, How to recover an Illustrator file (HAVE). DesignPoint, but do not seem to solve my problem.

  Most of these items asked me to open Adobe Illustrator preferences and /enableContentRecovery the value 1. However, I've just updated my CS6 version 16.0.4 recently, and the /enableContentRecovery does not exist in the file.

  If there is someone who knows how to do on this subject, I will be eternally grateful!

  Thank you!

  Thanks for your help Jacob!

  I managed to solve the problem on my end. What I did reinstall an older version of Illustrator CS6, where he (finally) had /enableContentRecovery somewhere in the Adobe Illustrator preferences file.

  After that, I opened the file recovered and removed the name of the instance (which, in this case, was "vertical arrow" who had problems) from the list and it worked. I got my rear backrest (with the instance of course lack).

  Thank you very much for your help guys!

• After downloading, I get a message that cannot open the application because it may be damaged or incomplete

  After downloading, I get a message that cannot open the application because it may be damaged or incomplete

  Please remove Adobe Application Manager to help cleaning tool and install Adobe Application Manager using this link: Windows | Macintosh

• I have Photoshop elements 12, I just bought the new Canon 5 d with 50mp a Photoshop cannot open the Raw file what should I do for PS 12 can open the file Raw 50mp

  I have photoshop elements 12 and I just buy Canon 5 d with 50 MP and Photoshop cannot open the 50mp RAw file I get an error message, I can fix PES 12 so it can open the big Raw files

  You need a version of Camera Raw of 9.0 or higher and Photoshop elements 12 will not manage that. You need to get the free DNG Converter, convert your DNG files, before you can open the items.

  Adobe - Adobe Camera Raw and DNG Converter: for Windows

  Adobe - Adobe Camera Raw and DNG Converter: for Macintosh

• Cannot open the raw files of Nikon d800 in PS CS5 and can not be updated Camera Raw plug-in

  Cannot open the raw files of Nikon d800 in PS CS5 (Win7 64 bit). It is said, the model not supported by Camera Raw. Tried to update Camera Raw plug-in for d800 but keep error message: failed to update, Adobe Application Manager may be damaged. Re-install the latest application manager, but still the same error message. How to fix?

  Thanks to them both.

  Nothing worked until I managed to speak directly to Adobe support. They recommended to install the latest version of Camera Raw Installer 8.6. It has not helped to open NEF files immediately but he fixed an error of 6.7 'update failed' updated Camera Raw! After updating to 6.7 all goes well, see my d800 naves. Cheers, Sergey

• Cannot open the repository in mode online

  I can't open the repository in ONLINE mode
  
  I use version 11.1.1.3 the Administration of BI of Oracle and Oracle Enterprise Manager 11 g version 11.1.1.3 tool.
  
  My procedure is:
  -Manage company: open the repository, apply changes, restart the services
  -Administration tool: CTRL + L (open line) and type user name and password. But the Open button in the administration tool is always grey.
  
  Concerning
  Andrej

  Hello

  Can you please check the below mentioned link and follow the same and update.

  Cannot open the RPD in ONLINE mode

  Hope this helped / replied

  Concerning
  Young