Cannot open the SAP IDES by virtual machine.

Similar Questions

• The former "cannot change the power state of virtual machine: the process has exited with an error: end of the error message" thing again (Fedora 8/Server 1.08)

  OK, this problem beautifully undescriptive I've seen caused by what seems to be dozens of things happening for me.

  I made the mistake of horrible update my FC8 kernel to the latest one (2.6.26.8 - 57.fc8).  Mind you, that's all that's changed.  It was with a 1.06 server with happiness and perfectly good computers running virtual in use before the upgrade.

  After the new kernel and reboot, I had to rebuild vmmod.  I had to get a fix of any - any later that I used with my previous kernel (116 does not solve the problem of compiling) so I used all-any117d.  Update like a champion.

  Try to turn on a VM and Ihanta!, the above error.

  Nothing else was changed.

  I tried the upgrade to VMware Server 1.08.  Used all-new any117d - update OK.

  Error again.

  I have re-run the compilation, this time to say 'yes' to what the installation script to "adjust the permissions of all virtual machines in xxxlist" or whatnot.

  Error again.

  1. status of /etc/init.d/VMware

  Networking networking on/dev/vmnet0 is running

  Invited only on/dev/vmnet1 network is running

  Network invited only on/dev/vmnet8 is running

  NAT networking on/dev/vmnet8 is running

  Responsible vmmon module

  Loaded module Vmnet

  FWIW, I compile as long as root, but have always run VMware server from my UID nonroot.

  What now?

  I'm in the same boat.  Fedora 8 2.6.26.8 - 57.fc8 #1 SMP

  I have tried uninstalling/reinstalling v1.0.6 thru 1.0.8 with all 116 updates and 117d.   117D compiles with every version of server but when I try to turn on a virtual computer I get this error.

  Cannot change the power state of virtual machine: the process has exited with an error:

  vmxvmdb: name of the Index generated by the configuration file

  POST (no connection): Version mismatch with vmmon module: expected 138.0, obtained 168.0.

  You have a bad version of the module kernel "vmmon.

  Try reinstalling VMware Server.

  POST (no connection): failed to initialize the surveillance apparatus.

  Failed to initialize the virtual machine.

  End of the error message.

  I found several posts other people have this problem but

  they are months with no recent activity and nothing that solved the problem.  I found appeared

  to get a fix, one updated the all an update that corrects the problem for

  2.6.26 performing several nuclei, but the link for the update on TI-psycho appears to be dead.  Here is the link to the discussion

  http://Fedoraforum.org/Forum/showthread.php?t=199026&page=2

  Of course, I would like to know how to solve this problem as well.

  Thank you

• Open the console on a virtual machine is already connected with customer Horizon

  Good afternoon

  Is there a way to see the screen (with console open on vsphere) of a virtual machine when someone is connected with the customer on the Horizon?

  Because, if I try to open a console, I am connected to the virtual machine, but I see a black screen, the video seems to be taken by a customer of the horizon.

  Best regards

  How to hide a Horizon VMware view desktop - Mike Tabor

  Thanks mittim12, it brings me to this Web site and the Group Policy object model works very well

• Cannot connect the removable devices to virtual machines

  Hi people,

  I'm trying to connect any device USB to my virtual machine, having read all the guides, I don't see any of my USB dconnected the removable devices tab.

  VMware tools are installed.

  I'm using VMware Workstation - 8.0.6 build 1035888 on Windows 8, 1 - updated with the latest updates.

  

  Can someone help me?

  Thank you

  D.

  Following your response, I found the solution:

  Configuration of Windows compatibility:

  '

• cannot resize the disk on a virtual machine

  Hello!

  I have a little problem, I can not resize the size of the disk on some of my virtual machines.

  I tried yesterday on two and worked well, tried to day (different vm) and it does not work so well for me.

  I first stop the virtual machine, rightklick, change the size to 20 GB, 4 GB and press OK.

  When I then rightklick on the virtual machine after pushing OK the size is always 4 GB (I don't mean in VI client for Windows).

  Why? workaround solution?

  Thnx for help.

  VM there snapshots?

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• Windows 7 a vmdk file not found, cannot open the file '... Virtual Machines.localized/Windows 7.vmwarevm/Windows 7. VMDK

  Could not open the file ".../Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7.vmdk:

  Help, please. I copied this over from a backup and it does not open. I joined the collection of support...

  Thank you very much!

  B

  it2webber wrote: could not open the file ".../Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7.vmdk:

  Help, please. I copied this over from a backup and it does not open.

  How the Virtual Machine has been backed up and restored?  If Time Machine then...

  It is a known fact that Time Machine is not 100% reliable backing up/restoring VMS in all circumstances/conditions.  Also back up Virtual Machines via Time Machine of disk/time intensive and wastes a lot of space for something that may be corrupted and worthless time to restore it.  At least I would exclude the Virtual Machines with virtual machines and Time Machine shutdown, not suspended and VMware Fusion closed and then manually copy the VMS to another location, preferably on a different physical hard drive.  So keep the user data stored in the virtual machine saved out of the Virtual Machine on a regular basis in order to always have a backup of the current user data.  If you need to restore a properly saved by VM is not as common at least you will have a virtual working Machine and data user to go forward with when you find out your Time Machine backup of the virtual machine fails.  Also take a look at: best practices for backup of virtual machine (programs and data) in VMware Fusion (1013628)

  That said, if you don't have a copy of the file "Windows 7 - f004.vmdk" and then to try to retrieve the data from the user, you can try the following:

  Download then unzip it (double-click on) the joint "Windows_7 - f004.vmdk.zip" file that contains the file "Windows 7 - f004.vmdk ' an empty logical binary measure that has been created on the metric of the existing drive and add to the Package of the Virtual Machine.  This should allow the VHD to be considered as a virtual hard drive, assuming that there is no damage to the extent of the binary left headers.  Take a look on: work with Virtual Machine packages

  At this point, that the VHD has the scope necessary to show as a full disk, assuming that it is not corrupt the header in other binary extensions and can now attempt to access for the recovery of user data.

  There are several ways to try to retrieve user data.  The easy, although not necessarily work properly according to what now lack us due to replace the missing binary extensions with a logical empty measure, is trying to start the VM normally.  If the virtual machine starts up on the desk and VMware Tools load properly you should be able to copy your data to user off on a USB or slip and fall on the side of Mac or if you have a configured VMware folder then copy the files through it.

  Other methods involve starting the Virtual Machine with a Live OS ISO Image and copy files from a USB key or temporarily assemble the VHD to another Virtual Machine work.

  With the right tools installed the virtual hard disk could also be mounted as another accessible Volume through Finder.

• Cannot open the lightroom catalog called "Lightroom Catalog" because it's too new to be used by this version of Lightroom.  You want to select a different catalog?  This is the message when I first click on LR and I have no idea what do to m

  Cannot open the lightroom catalog called "Lightroom Catalog" because it's too new to be used by this version of Lightroom.  You want to select a different catalog?  This is the message when I first click on LR and I have no idea

  Hi steves

  This means that you try to open a catalog from Lightroom CC/6 in an earlier version of Lightroom

  What version of Lightroom you have installed?

  Concerning

  Assani

• Burn the disk to a virtual machine?

  It seems that I cannot burn a disc of my virtual machine. I searched, and apparently you have to add the drive as a SCSI device. So I edited file (this file may be less organized!) machine's .vmx and changed all instances of ide0: 1 at scsi0: 1, but it seems to merge changed to IDE.

  So, how to configure a virtual machine to allow under 3.1 disc burning?

  Hello

  .. .and changed all instances of ide0: 1 to scsi0:1, but it seems to merge changed to IDE.

  Normally merge changes only return if you do not leave merge until you have changed the .vmx file.

  This meant that the file has been opened by Fusion during the time that you edited.

  Just as a note.

  Every time you handedit a .vmx file, make a backup before you change it, then you can go back if someone went wrong

  Hope this helps.

  --
  Wil
  _____________________________________________________
  VI Toolkit & scripts wiki at http://www.vi-toolkit.com

  Writer to the blog www.planetvm.net

  Twitter: @wilva

• Error: Cannot open the disk: Test.vmdk

  Hi all

  I'm having a problem with the ovftool.

  Here's what I did.

  (1)I have created a virtual machine running CentOS.

  2)these are the 3 files I had.

  Test.vmx

  Test.VMDK (file descriptor)

  # Disk DescriptorFile

  version = 1

  CID = 5046e880

  parentCID = ffffffff

  createType = "vmfsPreallocated."

  
  

  # Description of the measure

  RW 83886080 VMFS 'Test - flat hard' 0

  
  

  # The database disk

  #DDB

  
  

  ddb.virtualHWVersion = "4".

  DDB. Geometry.Cylinders = "83220.

  DDB. Geometry.Heads = "16".

  DDB. Geometry.sectors = "63".

  ddb.adapterType = "free".

  Test - flat hard

  (3) this is the command I ran

  OVFTool 'Test.vmx' 'Test_New.ova '.

  (4) it is the error I got.
  2012-09 - 05T 12: 24:57.817 + 05:30 [verbose 7F22134FE740 "Default"] [ovfTool.cpp] is the initialization of the libs

  2012-09 - 05T 12: 24:57.817 + 05:30 [verbose 7F22134FE740 "Default"] [ovfTool.cpp] the determination of source

  2012-09 - 05T 12: 24:57.818 + 05:30 [verbose 7F22134FE740 "Default"] [ovfTool.cpp] the determination of targets

  Source VMX opening: Test.vmx

  2012-09 - 05T 12: 24:57.821 + 05:30 [verbose 7F22134FE740 "Default"] could not open the disk:./Test-1-0.vmdk

  2012-09 - 05T 12: 24:57.821 + 05:30 [7F22134FE740 verbose "Default"] Exception: cannot open the drive:. / Test-1 - 0.vmdk. Reason: The specified file is not a virtual disk

  Error: Cannot open the disc: Test-1 - 0.vmdk

  Help, please!

  Thank you

  createType = "vmfsPreallocated."

  is not an options valid here - have you set yourself?

  Try
  createType = "vmfs".

• Cannot open the application "Mail" because PowerPC applications are no longer supported

  I work on a MacBook Pro mid 2012

  Intel Core i5 2.5 GHz

  OS X El Capitan 10.11.6

  The Mail app suddenly quit and when I tried to resume, I got this message

  "Cannot open the application"Mail"because the PowerPC applications are no longer supported."

  This also happens with the "Maps" app

  All Mac software are up to date, but "Mail" has been working fine since my last update that was awhile ago.

  I am confused to say the least. Suggestions? Thank you!

  If you do a Get Info (command - I) on Mail and Maps applications, what version numbers do you see?

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• Receive "Safari cannot open the page. Too many redirects occurred trying to open google

  On a Mac OS X 10.7, when I try and access google/mail I get the message: "Safari cannot open the page. Too many redirects occurred during open yo... Any ideas?

  In your Safari menu bar, click Safari > Preferences then select the Privacy tab, then click: delete all data Web site

  Then exit then restart Safari to test.

  If you see the same message, the redirects may be due to malicious software.

  You can download here free malware removal utility > https://www.malwarebytes.org/

  Or, if you would rather download MalwareBytes, you follow the instructions in the malware removal manually here > remove the unwanted advertising software that shows ads advertising and graphics on your Mac

• Safari will not open a Web site, open to all others. I checked with chase, the site that I can not open, they said that their system works. I closed the computer. The message I get is "" Safari cannot open the page because the unexpected server ""

  I have a mac-mini end 2012, OSX El Capitan 10.11.3, 2.5 GHZ intel core i5, 116 GB 1600 MHZ, DDR3

  When I connect to my Chase account using 1Password, I get the message "Safari cannot open the page because the server has quit unexpectedly the connection, try again later".

  I called Chase, their system is working normally. I rebooted the computer twice, I have tried for 3 days now.

  I went to Safari/Preferences, deleted cookies etc. All to nothing does not.

  Ideas?

  Have you signed up with before Safari?

• El Capitan: Cannot open the application "app name" because it may be damaged or incomplete

  Came across this several times. After you initially upgrade to El Capitan 10.11.2, after logging into my main account (admin), I was not able to open applications and received the following error:

  "Cannot open the application name"app"because it may be damaged or incomplete."

  I couldn't open "Activity Monitor", "System Preferences", "Finder" or anything (provided, App Store or other system). The icons will revert to the default application icon. Other users have no problem with the same apps.

  After the panic, I found a solution: go to another admin account, delete the old user account, and then add it again. This version corrects the problem of this user; It apparently rebuilt the user for that user identity information, while leaving their home folder (and preferences, documents, key rings, etc.) only. iCloud information must be re-entered, but it is trivial. Once the user delete and add, I was able to run these applications.

  When I upgraded to 10.11.3, it is the same thing, but to 3 accounts. I managed to solve this problem through the guest account - that is, I was still able to authenticate as an administrator, but I could not open a session and run anything.

  El Capitan removed permissions repair; I think it can be done in the recovery console, but I shouldn't do that.

  No idea why this continues to be?

  Generally to searching for the above error message is specific to applications from the App Store or other, not about things like "Activity Monitor" and "System Preferences."

  You now have this problem?

• Cannot open the file resource user interface

  Hi all

  I have to do an interview on a 2000 project (don't remember what version of the CVI was). I have 10 files IUR in the project and open all fine in the IDE, but one. I get the following message: "cannot open the Pnl_Main.uir user interface resource file (suddenly reached the end of the file).

  I've checked all my backup and they are all identical, so if there is a file corruption, he is old enough.

  In any case, here is the file, in case, can someone tell me what is wrong with him, or maybe open and re-record with an older CVI in case it's just a problem of version...

  
  

• lack of PIDOCOB6.dll cannot open the program

  lack of PIDOCOB6.dll cannot open the program of old software from microsoft for photos

  lack of PIDOCOB6.dll cannot open the program of old software from microsoft for photos

  =========================================
  The article Microsoft Knowledge Base that address the
  Question of PIDOCOB6.dll are no longer available, but I think
  the fix was to uninstall/reinstall Picture It!.

  Also... the error could be related to a printer driver... If you
  recently installed a new printer or your printer driver update
  It is maybe at fault.

  Sorry that's all I have on the subject.

  There is a Picture It! Group on Yahoo Groups... maybe
  could someone offer a few ideas:

  A_Picture_It_Help · Creative with Picture It & SOAK!
  http://tech.groups.Yahoo.com/group/A_Picture_It_Help/