Cannot place the file?

Similar Questions

• Error message on the 'open' file: 'cannot place the illustration. Could not read the tiff preview.

  To all,

  When you try to open an illustrator file I get the following error message:

  "Cannot place the illustration. Could not read the tiff preview.

  Anyone know how I can recover my document?

  Thank you

  Ian

  Version of IT? OPERATING SYSTEM?

  Does the linked graphics?

  You have several versions of the installed AI? If so, try all versions.

  Have you tried to drag the Acrobat file? Maybe he will open it.

  Just noticed you said "Can PLACE the illustration. You place instead of open by chance?

• InDesign doesn't let me place an eps file... gives an error "cannot place this file. No filter for the requested operation. »

  InDesign doesn't let me place an eps file... gives an error "cannot place this file. No filter for the requested operation. »

  This happens with a particular .eps file or many .eps files?

  • The EPS files from Illustrator? What parameters are used when files are saved?
  • Also this happens for all files created in Illustrator EPS (even one you create brand new, with just a few text and simple work in it).
  • Where are stored the EPS files that you place in InDesign?  If there is a form of corruption of files on the hard drive? (Maybe need repair file permissions?).
  • If you work on a network: can the files when they are saved as EPS files on your hard drive?

  CARI

• In the error message is Vista "Windows Media Player cannot play the file, might not support the codec used to compress the file.

  It worked very well what place please?

  * original title - Window Media Player cannot drive cannot read the file the player could does not load the file or may not support or does not support the codec used to compress the fichier.*

  Hello

  1. what changes have been made to your computer before the problem?
  2. the problem occurs on a particular file?
  3. What is the format of the file you want to play in Windows Media Player?

  You may encounter this error message for the following reasons:

  (a) the file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player.

  (b) the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  Windows media player will play only the files and videos only if it supports this type of file.

  Please see the bottom of the article that gives you information on the types of media files that supports Windows Media Player.

  http://support.Microsoft.com/kb/316992

  If the files are not supported by Windows media player, then you will need to use a few players from third party that supports this file format.

  WARNING OF THIRD PARTY SOFTWARE

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  See the link below for more information on the codec.

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

• Cannot manage libraries. Cannot retrieve CD using Windows Media Player 12, error '"Windows Media Player cannot find the file'

  Original title: WMP 12 won't fill the library, allow me to manage the libraries, or it is for me to rip music

  WMP 12 is unable to find my music files; When I select > Union > manage libraries > music (or any other library), nothing happens. If I try to extract a new music CD WMP will not let me select a location to store the file torn; If a test of tear, anyway, I get an error message saying WMP "Windows Media Player cannot find the file.

  Through the windows, I can see my music library and that it complements filled with many good things and play music that is then added to the library WMP one track at a time. But that bat rather point to WMP.

  I have added and deleted folders from the libraries of music, I used different hard drives, I used the store to library WMP and I installed and uninstalled and reinstalled WMP three times, I tried using WMP with and without Windows Media Center. Nothing helps. Any ideas?

  Hi Watford CVS,

  Try to enable and disable Windows Media Player and check the result.
  Step 1: Disable Windows Media Player
  a. Click Start, type optionalfeatures and press to enter.
  b. in the list of objects, expand multimedia functions.
  c. uncheck Windows Media Player and click ok.
  d. restart the computer so that the changes take effect.

  Step 2: Turn on Windows Media Player
  a. Click Start, type optionalfeatures and press to enter.
  b. in the list of objects, expand multimedia functions.
  c. place a check on Windows Media Player, and then click ok.
  d. restart the computer so that the changes take effect.
  e. check if the problem persists.

  See Or turn off Windows features turn on

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Player cannot find the file. 'If you try to play, burn, or sync an item that is in your library, the element can point to a file that has been moved, renamed or deleted'.

  Original title:

  Problems with rip audio CDs with windows media player

  Bought the CD now 82 and try to tear with the windows media player player, but keep getting the message "Windows Media Player cannot find the file. If you try to play, burn, or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted." What should I do to rip this cd please did tear previously no probs, but now seems to have a problem

  Thanks in advance

  Anne

  Hello
  1. You did changes to the computer before the show?
  2. Are you able to extract other CDs using Windows media Player?
  3. What is the file format of the file you are trying to extract?
  Method 1:
  Step 1:
  You can run the Windows Media Player Library convenience store & check if you are able to rip CDs.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
  Step 2:

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  
  Method 2: Rebuild the windows media player.

  exit Windows Media Player.
  b. click Start, type %LOCALAPPDATA%\Microsoft\Media Playerand then click OK.
  c. Select all files in the folder, and then click delete on the file menu.

  Note:
  You don't have to remove the folders that are in this folder.
  c. restart Windows Media Player.
  Note:
  Windows Media Player automatically rebuilds the database.
  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:
  exit Windows Media Player.
  b. click Start, type %LOCALAPPDATA%\Microsoft, and then click OK.
  c. Select the Media Player folder, and then click delete on the file menu.
  d. restart Windows Media Player.
  Note:
  Windows Media Player automatically rebuilds the database.

  Method 3: Disable and enable the windows media player. Follow these steps:

  a. open the Control Panel from the Start menu.
  b. open programs and features in Control Panel .
  
  Note: If the programs and features are not available, change the view by large icons at the top right of the control panel.

  c. Select Windows turn on or off features in the left column of the window programs and features.
  d. click on the plus sign next to multimedia functions.
  e. uncheck Windows Media player and then click OK. (You may receive a warning message. Click on the Yes button.)
  f. restart your computer.
  g. to reactivate the Media center follow the same steps and place a checkmark for Windows Media player.
  h. click on the Ok button.

  
  i. restart your computer.
  Reference:
  Turn on or off Windows features
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off
  Method 4:
  Change the location of Rip. see the steps mentioned in the link
  given below:
  To change rip settings in the Options dialog box
  
  
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-ripping-music
  I hope this helps!

• Get an error 'he cannot read the file' in Windows media player after the recent bios update

  * Original title: windows media player cannot play the files after the recent bios update

  I installed the latest update of the bios on my Hewlett Packard Windows 7 and now windows media player comes up with an error message saying that it cannot read the file for each file that he used to play.  Is it possible to uninstall and reinstall windows media player separately from windows?  or y at - it a file update or repair that I can download to make it work again.  I don't get a codec error.

  Hello

  1. What is the full error message?

  2. What is the number of KB of the update of the Bios?

  Please follow the steps below and get back to us with the results.

  Method 1: Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/is-is/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: Uninstall and reinstall Windows Media Player.

  Step 1: Uninstall Windows Media Player.

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck the brand in the face of Windows Media Player.
  d. restart the computer

  Step 2: Reinstall Windows Media Player.

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the multimedia functions and place a check mark in front of Windows Media Player.
  d. restart the computer and check with the question.

  Turn on or off Windows features

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  I would say that you can download the last packs of codec for Windows Media Player to the Internet and check out them. Make a search using your favorite search engine.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Let us know if it helps!

• ORA-19504: cannot create the file '+ DATA '.

  Hello everyone.

  This is the scenario:

  We have a test server that is used to restore daily backups of the Production database. Restore us the database with the same SID as the production one.

  For specific reasons, we need create a second database (with a different SID) on this server with an older backup from the production one. To realize that I'm trying to use a part of the "DUPLICATE without connection to the target" tutorials on the web.

  I tried the simple guide that I found which is:

  (1) copy the backup files cold /somedirectory

  (2) start OLD database with nomount

  (3) connect RMAN with OLDER as an auxiliary

  (4) run the following: DUPLICATE DATABASE FOR OLD BACKUP LOCATION ' / somedirectory' NOFILENAMECHECK.

  Here's the result (I deleted some lines because of the size of it):

  ----------------------

  RMAN > ProdDB to OlderDB DUPLICATE DATABASE

  2 > LOCATION of BACKUP "/ home/oracle/OlderBackupFiles.

  3 > NOFILENAMECHECK.

  4 >

  From October 1, 14 Db double

  content of Script memory:

  {

  clone of SQL 'alter system set control_files =

  "+DATA/OlderDB/controlfile/current.829.859839217" comment =

  ' Set by RMAN "scope = spfile;

  clone of SQL 'alter system set = db_name

  "ProdDB" comment =

  ' Modified by RMAN duplicate "scope = spfile;

  clone of SQL 'alter system set db_unique_name =

  "OlderDB" comment =

  ' Modified by RMAN duplicate "scope = spfile;

  clone to stop immediately;

  Start clone force nomount

  Restore controlfile primary clone of ' / home/oracle/OlderDB/controlfile_ProdDB_20141001_4159.bkp';

  change the clone database mount;

  }

  execution of Script memory

  SQL statement: alter system set control_files = comment "+DATA/OlderDB/controlfile/current.829.859839217" = "defined by RMAN" scope = spfile

  SQL statement: change the system db_name set = comment "ProdDB" = "modified by RMAN duplicate" scope = spfile

  SQL statement: alter system set db_unique_name = comment "OlderDB" = "modified by RMAN duplicate" scope = spfile

  (...)

  From restoration to 1 October 14

  allocated channel: ORA_AUX_DISK_1

  channel ORA_AUX_DISK_1: SID = 191 type device = DISK

  channel ORA_AUX_DISK_1: restore the control file

  channel ORA_AUX_DISK_1: restoration complete, duration: 00:00:03

  output file name=+DATA/OlderDB/controlfile/current.829.859839217

  Restoration finished in October 1, 14

  mounted database

  output channel: ORA_AUX_DISK_1

  allocated channel: ORA_AUX_DISK_1

  channel ORA_AUX_DISK_1: SID = 191 type device = DISK

  content of Script memory:

  {

  until the SNA 274262921.

  the value of newname for datafile clone 1 again;

  the value of newname for datafile clone 2 again.

  the value of newname for datafile clone 3 again.

  the value of newname for datafile clone 4 new ones;

  the value of newname for datafile clone 5 again.

  the value of newname for datafile clone 6 again.

  the value of newname for datafile clone 7 again.

  restoration

  database clone;

  }

  (...)

  From restoration to 1 October 14

  using the ORA_AUX_DISK_1 channel

  channel ORA_AUX_DISK_1: from the restore backup set data file

  channel ORA_AUX_DISK_1: specifying datafile (s) to restore from backup set

  channel ORA_AUX_DISK_1: restore datafile 00001 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00002 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00003 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00004 in + DATA

  channel ORA_AUX_DISK_1: restore datafile 00005 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00006 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00007 to + DATA

  channel ORA_AUX_DISK_1: reading from the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece

  channel ORA_AUX_DISK_1: ORA-19870: error when restoring the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece

  ORA-19504: cannot create the file '+ DATA '.

  ORA-17502: ksfdcre:4 cannot create the file + DATA

  ORA-15041: diskgroup space 'DATA' exhausted

  switch to the previous backup

  Oracle instance started

  (...)

  content of Script memory:

  {

  clone of SQL 'alter system set = db_name

  "OlderDB" comment =

  ' Restore the original value by RMAN "scope = spfile;

  clone of SQL 'alter system reset db_unique_name scope = spfile;

  clone to stop immediately;

  }

  execution of Script memory

  Errors in the script of the memory

  RMAN-03015: an error has occurred in the script stored memory Script

  RMAN-06136: the auxiliary database ORACLE error: ORA-01507: database not mounted

  ORA-06512: at "SYS." "X$ DBMS_RCVMAN ', line 13466

  ORA-06512: at line 1

  RMAN-05556: not all data files have backups can be recovered on SNA 274262921

  RMAN-03015: an error has occurred in the script stored memory Script

  RMAN-06026: some targets not found - abandonment of restoration

  RMAN-06023: no backup or copy of the file 4 found to restore

  RMAN-06023: no backup or copy of datafile 3 found to restore

  RMAN-06023: no backup or copy of datafile 2 found to restore

  RMAN-06023: no backup or copy of datafile 1 found to restore

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the command duplicate Db at 15:39:11 01/10/2014

  RMAN-05501: abandonment of duplicate target database

  Complete recovery manager.

  ------------------------------------------------------------------

  The first mistake of the stack was ORA-19504 while trying to restore the backup of the database.

  First thing I took a glance was ASM occupation but it enough available space.

  The second was a permission problem, but it doesn't seem to be the case because RMAN can correctly write the controlfile to ASM.

  One have some advice on what I should look for?

  Thanks in advance sorry for my English.

  Select this option.

  Hello.

  Thanks, but is not the case. As I have said, that the DATA diskgroup has space enough he uses only a single disk in a RAID.

  But I solved my problem... To the auxiliary database, I added the following to the spfile:

  DB_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".

  LOG_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".

  I don't know why, but with these two clauses, it worked well. Perhaps RMAN was trying to restore it to the wrong place?

• Photosmart C4780 installation fails at the "system cannot find the file specified."

  My problem began simply with your printer, a HP Photosmart C4780, who has always had a wireless connection and would not print.  Initially, the checked network connection fine control panel of the printer.  I ran a Microsoft printer troubleshooting, which found a block in line print and authorized.  The first test page print, but did print the "internal test page.  I did not understand what it meant, so I looked for help on the HP site.

  I ran the HP print and Scan Doctorand he suggested I have reinstall the driver.  I have downloaded and saved the current HP (PS_AIO_06_C4700_USW_Full_Win_enu_140_175.exe) and then uninstalled the existing driver.  When I tried to install a new, a window pops up saying "the system cannot find the file specified," with only a single box for click that simply says "OK".  The installation went through 'examining installation options', after entering "check updates, download updates, install updates" and then it was all in "audit system", who jumped out of the window "file not found" upwards, and when I clicked 'OK', the installation window as well as the error message box simply disappeared.  Which I suppose is the path to the file is under the window, but it didn't fit so he showed not the end.  What I read was "C:\Users\... \Local\Temp\7zS588E\Setup\.\Setup\hpzpnp40...»

  I found a topic on the same printer model for the same problem in the forum, which offered this hotfix:

  You must first complete a level 3 of the software uninstallation. I've included the steps below to do this.
  
  1. press the Windows key and the letter R
  2. type %temp%, and then click OK
  3. open the 7z folder (a more recent if there are multiples)
  4 open the util folder
  5 open the folder of the ccc
  6. double-click on the Uninstall_L3
  
  Once you have completed the Uninstall_L3, delete all of the items listed in the temp folder. Note, you will not be able to remove all the elements, please ignore those that do not. Then please empty the trash and perform a clean boot. I've included the document «How to perform a boot in Windows» If your computer does not request it, restart your computer.
  
  Once your computer is back, you must reinstall the printer software. You can do this either by using the Setup CD, or by downloading the software.

  I did what was suggested, until he got to the point where it says it was the case recommend not removing any more items if I had intended on using the HP Officejet printer (Yes, I have a second HP printer connected to the network) anytime in the future.  Not really understand how it all works, I decided to stop what I was doing, so unfortunately it has not solved my problem.

  Do I need to uninstall both printers HP before I can reinstall a?  And if I do that, is there a reason that I wouldn't be able to reinstall the two printers?  Looks like I'm asking trouble.  Bottom line... I can not install the driver.

  I tried to install the full versions and the driver base and still get the same result.

  I have a HP Pavilion dv6 - 3100t for computer laptop, running Windows 7 Edition Premium, version 6.1.7601 family service pack 1 64-bit.  I have not installed new hardware or software.  This printer has always had a wireless connection.  The router I'm using is a Netgear 54Mbps WGR614 v6 (provided by my cable company) and the network includes not only my laptop and the Photosmart printer, but also desktop ASUS, HP printer, an Officejet 6300 series (used only for printing graphics and photos via a wired to the router) and a chip on Vizio TV.  I use Norton 360 first Edition and disabled the antivirus auto-protect when I downloaded and tried to install the driver.

  Help, please!  And thanks in advance for your time and your attention.

  Oh, Jamieson, it worked!  I can print again!  A massive amount of thanks and congratulations to you.

  I couldn't believe it when he actually passed the point where it normally would stop the installation, but then almost at the end, upward jumped «Fatal error during installation»  My excitement sank into a depression.  He said while the installation was not successful and he needed to collect information in order to diagnose the fault.  I looked at what has been collected, and it was more or less gobblety-* beep * for me.  There was a code of 19714722 error condition, if that means anything.

  Then he placed on my desk, the "Error of Installation HP - Windows 7.hta" file and instructed me to do away with the current window, restart, and then open the file and move forward with these guidelines.  I did and he basically had me to restart the computer once again, and then turn the printer off, unplug the printer, then unplug the router, wait 30 seconds and then plug the TAA - DAA and back in, I'm back in the business of printing.

  Thank you very much for your time and patience.

  All the best to you and yours!

• Windows Media Player cannot play the file

  I get the following message appears when you try to listen to a streaming radio station live online.

  Windows Media Player cannot play the file. A network firewall might prevent the player to open the file by using the UDP transport protocol. If you typed a URL in the open URL dialog box, try using a different transport protocol (for example, "http:").

  I can listen to other stations, but not this one.  Before about 2 weeks ago, I had no problem getting the live stream.  Has been no change on my computer.  URL is: http://www.wlpv1079online.com/Live%20Streaming%20Page.htm

  Hi Kathy,

  1. what operating system is installed on the computer?
  2. which web browser is installed on the computer?
  3. What is the accurate and complete error message you get?

  Method 1
  I suggest you try the steps from the following link:

  Windows Media Player Error Message help
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5145&ID=C00D11B6&ContextId=70&OriginalID=C00D2EF9

  Method 2
  If the problem is with a particular station, then I suggest you to contact the support of the radio station.

  Method 3
  I suggest you to disable the firewall and see if the problem still occurs.

  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: Make sure that you enable the firewall after troubleshooting is completed.

• Unable to play video file error: Windows Media Player cannot play the file. The player might not support the file type or a required codec may not be installed on your computer

  Original title: Windows Media Player shows that the new codecs are required

  Original title: query codec and Media Player re

  Have used windows media player for many years on my dell. Usually to see the videos from Sony handycam. Just downloaded wmediaplayer and recent videos from Camcorder will not open one of the videos.

  The following message is displayed "Windows Media Player cannot play the file. The player might not support the file type or a required codec may not be installed on your computer. »

  As I have not changed anything helpful suggestions please.

  concerning

  The winemaker

  Hello

  1. What is the format of the video file?

  2. what operating system is installed on the computer?

  Method 1: Run the troubleshooter in Windows Media Player on Windows 7 settings:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: You can check if the file format of the music files are supported by Windows media player using the link below.

  Information on the types of media files that supports Windows Media Player

  Note: If you have tried to play the file type is included in this table, the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  Method 3: In addition, you can also download & install the necessary codec to play the files.

  For more information, see: Codecs: frequently asked questions

  (For Windows Vista)

  WARNING of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

• Recently I have not been able to burn a CD with Windows Media Player: I get an error message: "Windows Media Player cannot find the file."

  Hello

  I recently haven't been able to burn a CD with Windows Media Player (he worked last week, but not now). I get an error message "Windows Media Player cannot find the file. The link between the library item and its digital media file associated with may be broken. "Try to fix the link or delete the item. There is a web help option which says that to fix a link, you click on the blue icon next to the item, then click "Browse this article. But the only icon I see is a little blue triangle next to individual songs in the library pane or list, there is no icon next to the name of the playlist. Although the click with the right button on the blue triangle gives me a few options, "Browse this point" is not one of them. Does anyone have any ideas what is wrong and how can I sort it please!

  Rick

  original title: burning a CD problems

  Hello

  
  (1) what version of Windows Media Player do you use?
  (2) what is the model of your CD burner?
  (3) you have the latest drivers for the CD burner?
  (4) what type of file you are trying to burn?
  (5) you receive error codes?
  (6) what version of the operating system is installed on the computer?
  (7) we get to a particular file?
   
  
  Method 1: You can try to update the drivers of your CD burner visit the manufactures Web site.
   
  Method 2: You can try to remove the CD, and then insert another CD and try to burn another file and check if the problem persists.
  
  Method 3: You can also check out the link below:

  Windows Help and procedures: burn a CD or DVD in Windows Media Player: frequently asked questions

  I hope this information helps!

• Windows 2k8R2 - receiving error when you connect (MMC cannot open the file: C:\Windows\system32\ServerManager.msc)

  Windows 2008 R2 - I just started getting this when I connect, and also when I try to manage the machine:

  MMC cannot open the file:

  C:\Windows\system32\ServerManager.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. This may also be because you don't have sufficient access to the file.

  It always worked before and work for other users simply not me on this particular area. It is a production company, and I need a quick resolution please. Thanks in advance.

  PM

  Hello

  Your Windows is better suited for the public of Windows Server on TechNet. Please post your question in the TechNet Windows server forum.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

• Setup cannot copy the file hpinkins5412.exe

  Setup cannot copy the file hpinkins5412.exe

  Using full features software and pilot OJ6500_E710n - z_334.4

  When I use this version:

  full feature software and driver OJ6500_E710n-z_1315

  All software installs normally.  I get all the correct screens.  I connect to a network printer. He fined the printer. He asks me where (postcode), I use the software.  I re - start.  The drivers are not installed.  I have run the diagnostics.  He said that the drivers are not installed.

  HP Officejet 6500 has more 710n

  XP Pro sp3

  I solved the problem with the latest version of the software:

  full feature software and driver OJ6500_E710n-z_1315

  The pilot would not have installed.  I used this web page to fix:

  http://support.HP.com/us-en/document/c01084522

  Thank you

  Docfxit

• Get error Windows media - player media player cannot play the file (0xc00d11B1)

  When I try to play music on napster, I get a message that says that the media player cannot play the file, and not (0xc00d11B1) that can napste fix or is there a problem with my Media Player?

  Hello

  I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

  http://Windows.Microsoft.com/en-us/Windows7/C00D11B1

  It will be useful.