Cannot play music files because they are protected from the DMA

Similar Questions

• Unable to access the photo viewer; and also cannot access the desktop icons because they are changed to the photo viewer icon.

  Original title: I tried to apply the photo viewer to open a file and the photo viewer icon replaced each icon on my desktop. Now I can't open anything on my desktop. What is going on?

  The name is below the icon, but the correct icon has been replaced by windows Photo Viewer icon. When I click to open it, it says: windows Photo Viewer cannot open this photo because Photo Viewer does not support this file format, or you do not have the latest updates... I don't know what I did!

  Hi,

   

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you are unable to access the photo viewer; and also cannot access the desktop icons because they are changed to the photo viewer icon. Please let me know if you do not experience this problem.

  I understand the inconvenience caused to you. I'll help you solve the problem!

   

  Before troubleshooting, I have little information on the issue.

  1. did you of recent changes to the computer before this problem?

  Try the methods suggested in the article below and check after each method:

  Method 1: Icons change incorrectly in Windows: http://support.microsoft.com/kb/2396571

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the in the Microsoft Knowledge Base: 322756. How to back up and restore the registry in Windows: http://windows.microsoft.com/en-us/windows-vista/Back-up-the-registry

   

  Method 2: Run scan files system (CFS) auditor, to repair missing or corrupted system files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.microsoft.com/kb/929833

  If the problem persists, post your reply with the results and the questions asked above. We are happy to help you further in the advanced troubleshooting steps!

  It will be useful.

• Cannot open this file because you are not allowed access to the location of the file

  I restored my compaq 510 professional vista, I get the "cannot open this file because you are not allowed access to the location of the file" whenever I tried to open a file or image

  I guess these are files from your previous installation. Take possession of them.

  A. check the permissions of the file or folder the file is saved in and appropriated:
        
  1. right click on the file or folder and then click Properties.
  2. click on the Security tab.
  3. under group or user names, click your name to see the permissions you have.

  To open a file, you must have the read permission. For more information about permissions, see what are permissions?

  http://tinyurl.com/2j9vgr

  To take ownership of a folder:

  1 right click on the folder you want to take control and then click Properties.
  2. click on the Security tab, click Advanced, and then click the owner tab.
  3. click on modify. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  4. click on the name of the person you want to give to the property.
  5. If you want this person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects to check.
  6. click OK MS - MVP - Elephant Boy computers - don't panic!

• Cannot play music files in Windows media player hard disk external.

  Hello

  I tried for a while to play the transferred music from my hard drive external.

  I tried all sorts of things with WMP and it's just not going to play the files.

  I canoe play my music.

  The thing is that it shows the albums and songs listed there.

  But when I open a song and try to hit the room then a box opens with a warning.

  Say that Windows Media Player cannot find file.

  This has never been a problem with older media players.

  I tried to re - download the player, but it's not part of windows more I guess and that sucks.

  I want the old player back.

  This was very frustrating, I hope someone can help.

  Thank you.

  Robert

  Hello

  1. What are the troubleshooting steps you have tried?

  2. What is the file format?

  3. are you able to play other files?

  4. What is the exact error message you are getting?

  5. don't you make changes to calculate it before the show?

  Please follow the steps below.

  Method 1:

  Run the troubleshooter from the below mentioned link.

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2:

  Run the troubleshooter from the below mentioned link.

  Open the troubleshooter in the Windows Media Player library

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

• Cannot play music files in the Amazon (m3u)

  Windows 7 x 64
  Firefox 39.0.3

  I still managed to play music in the Amazon files until either a Windows or Firefox recent update - don't know which came first. No matter now as Amazon apparently use m3u files & I don't seem to have a plugin for them it keeps wanting me to download or save etc, which is not what I want to do with I want to taste a few tens of individuals.

  I have VLC and WMP plugins media both always active value & restarted Firefox many times while working through this issue, but probably none of these work for m3u files? I've read more articles on similar issues, but none of the various fixes have worked for me for example on: plugins options - True (not sure exactly that one is that I had to change). I downloaded and tried to install a 'media pack' for Win 7, but that no longer works.

  Never had this problem until recently through several updates to Windows & /or Firefox so a bit puzzled as to what else to do. The only types of files mentioned in the Options are mp3, 4, mpeg4, wmp.

  Appreciate any ideas. Thank you.

  Please upgrade to the latest version of Firefox:

  • Update to the latest version of Firefox

  The former autour work should do an add operation, try Firefox is Mode without fail to ensure that it is not not a problem with an add we:

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Cannot play music files in the car

  original title: music files

  Hi player I have in my car will not play some music files on a flash drive, the files are wma and are compatible with the player, he plays some wma files, can anyone help please.

  It could be a variety of reasons. If able to read certain files WMA but not others, it could be a bit rate or file corrupt or many other reasons. Some car stereos are limited to a certain bit rate (320 Kbps). Everything depends on your Hi-Fi and WMA files are coded as, among other factors.

• Cannot play music files in the Source (CS6) monitor

  I just met a very strange problem today that I can't fix.

  If I click on an MP3 or WMA file in the project window, it will not play in the source window. It blocks all the other windows and I have to restart the first.

  Sometimes, he will play in the windows, but then there is no sound even if the meters are moving.

  However, I can play the music in the Source window if I double click top in the main timeline. everything is normal to do this way.

  I have no problem with playing in the Source window MXF files.

  So for now, I can't see any music file in the source window.

  Anyone know what could be the problem?

  My PC spec is:

  I7 3930

  64 GB of ram

  4GB nvidia 680

  Card SB X - Fi Creative sound

  C drive: SSD

  D drive: 300 GB Raptor > Scratch disk

  F drive: RAID 3 array > videos

  Media cache is drive D and the option "Save media cache files next to the originals when possible" checked.

  Thank you

  Thank you.  Try again, one more down.  (Audio)

  Also, replace 5.1 mix front only.

• What is I can print RGB files because they are more close to what is on the screen?

  Greetings,

  I have an important question on how to set up my files for printing. At school, I was taught to work in CMYK mode or at least convert any RGB, I work on CMYK. I'm at work now, and the files that I print out of the dull (in CMYK). I converted an RGB file and characterized by the color space RGB 1998 and re do print. The first CMYK print looked gray and lacked vitality. The new print print RGB very dynamic and matched to the screen better than the CMYK colors. My boss wants me to do the rest of the prints in RGB because it prints with better momentum. Also, I work in Illustrator.

  So my question is: can I convert all my CMYK in RGB files, send them to the print shop and wait for prints to be vibrant? Or convert my CMYK RGB files will mess up standards for printing companies?

  RGB print better, but I've learned to always print in CMYK mode.

  I appreciate the help.

  F

  In fact I'll leave the files to CMYK as turning them into RGB can cause loss of color during the big final prints. I'll print however RGB layout files.

  Post edited by: Quinonez

  Quinonez,

  It sounds like your printer (driver) no PostScript and made to receive RGB documents which are then converted to CMYK on the side of the printer.

  When you use it for a CMYK document, it will convert first in RGB, then back to CMYK, in other words a double conversion is about as bad as it sounds.

  For such a printer, it's best to start in RGB, but who can fall back you into the issue of having different bases for printing.

  You can get around it with PS Printer Kit - Q3 to add features for printing PostScript 3 emulation, mentioned here fifth point in the list of features), that I hope will give you some colors at least as good as you have with RGB:

  http://www.digitalcopier.org/Canon-digital-copiers/Canon-imageRUNNER-IR-C3480

  Exclusive Canon UFR II's printing technology is standard on all models. This means that each color imageRUNNER system is a real right of MFP out of the box, ready to produce volumes of general business documents. Guests also have a choice of two print controller options, imagePASS-J1 or PCL Printer Kit - Q3, for extended print capability. For customers who don't require true Adobe PostScript, the unit can also be equipped with the PS Printer Kit - Q3 to add capabilities to print PostScript 3 emulation.

• serious problems! Adobe seems to have supported all the files - cannot open most files, says they are c

  Hello

  Help please! After using Adobe reader software only cd-rom and try to convert the images to save elsewhere - my computer seems to have been taken over by Adobe. I can't access a lot of my files - just get a message from Adobe saying file not supported or damaged.

  The desktop icons have especially taken over by Adobe.

  Cannot access that browser (Firefox) by going through "Gadgets Google Desktop" online.

  Have tried to uninstall and re-install Adobe, won't do it anymore - and can't access system restore.

  Tried everything several hours (maybe made things worse!).

  There is a message of standing Adobe with box error message on the start page.

  Wrong - obviously tried to restart etc.

  Very worried and do not want to have to pay Adobe for the privilege to unravel, he.

  Have no Flash Player at the moment and impossible to install.

  Please how to restore all my files there normal condition and what to do about Adobe.

  Would be very grateful for the constructive help.

  My PC is a dv6-6001sa 64-bit windows 7.

  Thank you very much

  concerning

  Zelda

  Hello

  Please use this hotfix from Microsoft.

  Kind regards.

• my windows media cannot read a file because it does not support the code, with which it has been compressed. What program is best to open it

  the file is BHS1_Dwayne.rpc
  I'm confused why I can't open it. Is there a way I can change the file type or use a general program

  Hello

  You may encounter this error message for the following reasons:

  (a) the file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player.

  (b) the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  Windows media player will play only files, if it supports this type of file.

  Please see the article which gives you information on the types of media files that supports Windows Media Player: http://support.microsoft.com/kb/316992

  If the files are not supported by Windows media player, then you will need to use a few players from third party that supports this file format.

  WARNING OF THIRD PARTY SOFTWARE

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Why Thunderbird 38.1 suddenly treat the addresses of the list in the form of individual addresses, & dismiss them because they are not in the form user@url?

  When you try to send a message to a group set up in my address book, I get an error message [group name < updated the group description >] is not an email address valid because it is not the form user@host. You need to correct before sending the e-mail message. Thunderbird has apparently taken the description section and tried to treat it as an email address. In doing so, it changes the description of and the original format [names, name2, name 3] (with the exception of the hooks) of [< name >, name2, "name 3" >].

  The list of mail has worked with no problems until today.

  Zenos. thanks for the suggestion. Although he did not provide a direct solution, he pointed me a. Being reluctant to try to re-enter an address book with more than 1,000 entries, I saved the book and replaced by a backup copy of a computer when I heard the e-mail function worked as desired. I had the same problem.
  I tried to export the book to save what I could at least and ran into problems, I discovered since came from trying to export "all address books.
  Then, I opened a copy of AB. File MAB in Quattro Pro, where I noted PS split the description section of the list of mail problem in separate cells, from commas in this description. I went back to the address book, removed commas from the description, and my group e-mail went out as gently as might be desired.
  I would note that commas have been this likely description for 15 years or more and only now has caused a problem. I guess that's due to some changes in Thunderbird was last updated. Would be nice if we got warnings about this kind of change.
  Answer to my problem: remove the commas from the description in the properties of the list.

• Copy packaged files but related are taken from the old location

  Hello

  I use CS5 on Windows 7.

  I packed some InDesign files on my computer (let's call it the X drive). Then I take all of the folder that contains the document InDesign, the links folder and the folder of fonts and moved to another drive (let's cal it drive Q).

  If I open the file on drive Q and look at the links Panel, he tells me all the links are from drive X, rather than pull them from the drive Q.

  I know that I can use the option 'create a link to the folder' and tell him to use the links folder have the Q drive, but how come it does not only automatically?

  Thank you

  Katie

  Even if you have packed the file, links are always absolute and point to the location where the package was created. If you COPY the package to a new location, and the old site is still accessible, ID will continue to use the old links. If you MOVE to a new location, and the links are no longer at the old location, then ID search the links folder in the folder of the package.

• I get the error code 646 when trying to install 2 very important updates. Also pdf files and others are missing from the registry.

  RPDF files missing.never post private information such as numbers of mail or telephone!

  Ideas: pdf files are missing and error 646

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  during the installation of updates and some extensions files cannot be opened.  Also when you do e-mail or any continuous strike moving cursor then have to keep changing the typing.  Error 646 present during updates.

  Hey Jaynie Tatt

  Read and follow the information in the microsoft link below to fix your error code 646 using their fix - it or using the registry edit

  http://support.Microsoft.com/kb/2258121

  Walter, the time zone traveller

• Facebook games, I can't read the letters that they are far from the small and I can't change the

  on facebook games, the letters went just very small and so have games and I have tried every thing to get the bigger and nothing works

  As suggested by Rohit, you can use CTRL + or CTRL - zoom/reduce the size of your screen in your browser (works under IE and Firefox) and restore it to use by default CTRL 0

  I hope this helps.

• How can I link to R3D files when they are multiple (long resumes 4Gbs).

  Hello guys,.

  I'm transcoding (SOUL) my red images to the H.264 format for easy/fast mounting in another machine slow (the film's Director). But he comes to files with multiple R3D files, long takes over from 4Gbs, it creates several mp4 files, and they are all exactly the same.

  -Can I actually use an mp4 for my editing file and replace with originals later?

  -I should only transcode the first R3D file?

  -How can I connect back once the editing is done? Ive tried but do not know what R3D file should link to and does not after trying it. The mp4 file is take it all, but the R3D are not taking it together since they are separated in different R3D files.

  I work with first CC 2015.

  Thank you so much, I have spent days watching the tutorials but can't find my answer, I would greatly appreciate your help.

  I'd probably transcode to prores proxy, or something that does not have the long form, GOP, as Mp4.   Then, a test and make sure your guard to transcode the original code term when you bind again, there is no problem.

  do a test run w / a clip as not to lose time and when you do a couple of edits in a timeline w / as a clip, click with the right button on the clip in the project bin and select 'replace the clip', point to the original file then who must fill out your edited clip w / new source footage.

  you will then need to change the codec of your timeline should match that of your source.    hope that helps.    Certainly test first to make sure that you have the workflow down before you begin your session.

  This also works when there are tons of clips in your tray of sequences that need to be replace.

  When we work w / R3D files, usually created proxies on the fly for this reason (I think).   I'm sure that simply point to the first R3D file in this order if you make your own proxies, although I have not tested.   the first R3D file will usually connect automatic for the rest.

  This isn't the way we usually work but seems it should work.      Good luck.