Cannot print, open print preview or get into the page layout

Similar Questions

• I can't and never been able to open a file that was previously saved on hard disk by selecting the print option to get in the print dialog box

  I can not and never been able to open a file that was previously saved on hard disk by selecting the print option to get in the print dialog box. Firefox displays gooblygook, even if the name of file is an html element, the Notepad of Windows crashes, MS Excel does not recognize the file type. MS Word also displays goobblys when the file has no file extension.

  If you use the file printing, then you will get a file that is supposed to be sent to a printer, and this file has any sort of code formatting for this printer.

  Open such a file in Firefox or a text editor can only work if you use one printer for text to print the file to, then make sure that such a printer is installed and selected.

• HP Photosmart C6280: cannot print on C6280 wireless after the upgrade to Windows 10

  Cannot print on C6280 wireless after the upgrade to Windows 10. Have removed the device, but try to re install the printer when is not found. Can print if I connect USB. Tried to reload the driver using HP Support software help, but when he arrives at the end of the download fails.

  Hi @Ron9871,

  Welcome to the Forums of HP Support!

  I see that you are unable to get your printer HP Photosmart C6280 wireless printing. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I would like to try the steps in this guide, "offline" Status Message printer (Windows 10).

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  • Print a Page of Network Configuration menu of the printer front panel. Note: the IPV4 IP.
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.

  Please restart the router, the printer and the computer in this sequence.

  If you're still having problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  You can try to change your WSD printer port by a Standard TCP/IP port.

  To do this, you will need your current IP address printers.  The Network Setup page shows the parameters of network for the product. To print this page; Press the button of network () on the control panel of the product.

   

• When I open the games online I can't get into the game, and they will write check your firewall

  can you please answer

  When I open the games online I can't get into the game, and they will write chek your firewall

  Original title: network programs network networking Internet Web site Site Web Web Site URL

  can you please answer

  When I open the games online I can't get into the game, and they will write chek your firewall

  Hello

  I'm sorry for the inconvenience, but I should be able to help.
  Internet connection issues are widely available and vary from one case to another. Your question, however it seems that the most likely cause is that your computer's firewall prevents your applications to connect to the internet. You can check this easily by:

  1. go to the Start Page of Windows 'default Page of Windows 8.

  2 mouse hover in the top right of the screen then click on the search"" button.

  3. type in 'Control Panel' after a brief search you will see a button at the top of the page left labled 'Control Panel' click on this button and you go in desktop mode and allow you to navigate in the control panel.

  4 from there, click on the tab labeled "system and security."

  5. then, click on the second option in the list titled "Windows Firewall"

  6. the first thing you want to do is to check if you are on a "private" or "Public network" (a private network is usually the safest and although on this type of network, you are less likely to be vulnerable to attacks, Public network are accessible by anyone and give a greater risk).

  7 the right it will say Private Networks Connected / not connected and below that it will say comments or connected/not connected networks public. Most computer security settings differ based on your type of connection, if you are on a network audience of settings on your computer will be more strict and could prevent your programs connected to the internet. (Say if you are connected to a private network, you can probably exclude this.)

  8. If you are connected to a private network and your programs don't always work correctly in the top left of the window under "Control Panel Home" you want to click on the option "allow an app or feature through Windows Firewall."

  9 a list first your "Internet Capable of programs" quickly browse and find that you are having problems with and take note of the checkboxes next to them. If no box is checked, you will want to allow them to connect. Do this by clicking on the "Edit settings" button located in upper right

  10 you want then allow your program through the firewall, this by simply checking the box next to it. (Note that if the Public network that can leave your computer vulnerable or higher risk)

  11 after doing this click ok, now go back and try to run your program and see if the problem is resolved.

  12. If you cannot find your program, click the "Allow" another app... button and navigate to your programs (usually in the folder C: / drive in the folder programs.) and choose your program and adjust the settings to allow through the firewall.

  13 if this does not solve your problem, and the problem persists, try to go into Internet Explorer, by clicking on the gear in the top right and open Internet Options. Go to the Security tab and check how strict your settings are. You should be able to click on "Reset to Default" to solve this problem, if that's the problem. (Located at the right bottom)

  I hope that this helps if not let me know and I'll give you some suggestions.

  Thanks for your time, I hope this has helped.

  -Ian

• Cannot get into the BIOS on my Portege R700

  Hello friends,

  I have laptop Portege R700-1321.
  1 year a go, I was updating my version of BIOS to 2.20 and after that I have cannot get into the BIOS!
  try a passer-by but noway :(

  When you press F2 after you restart the computer nothing add and put it back again.
  try to change ro F10 boot order but still just restart :(
  I need to change the boot order to install the new OS fresh and of course my BIOS setting.

  Please help me.
  If any body had a same problem or know how to fix it :(

  First of all you n t need to change the boot order in the BIOS if you want to reinstall the new system.
  You can press F12 all turn on/off the unit.
  Then a menu should appear where you can change the boot device.

• Occult video BIOS BIOS occult system and I cannot get into the bios?

  IT SAYS: System hidden BIOS Video BIOS with a shadow and I cannot get into the bios?  WHAT CAN I DO

  Hello

  Why you try to go into the BIOS (Basic Input Output System)?

  For the problem with the BIOS (Basic Input Output System), I recommend you contact the manufacturer of your computer for help.

  Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  Hope the helps of information.

• Pavilion P6-2378: Cannot get into the BIOS

  I've recently updated my BIOS to v8.19 on my motherboard of Jasmine using service pack SP67068 after seeing a security warning on my original BIOS on the HP driver update site.  After the update, I am unable to enter the BIOS and more!  I see more startup or other screen.  Here's what I've done so far:

  (1) I entered "bcdedit/set {default} bootmenupolicy legacy" (and standard).  No splash screen.

  (2) I momentarily pressed and also pressed the ESC key during several start ups.  No splash screen.  When I press ESC after turning, the drive just stops.  To continue, I have to press Ctrl-Alt-Del to continue, and it starts Windows normally without a splash screen.

  (3) I went to change the settings of pc and navigated at startup in the UEFI Bios, but after the restart, but the computer crashes just until I press Ctrl-Alt-Del, then it boots normally into windows 8.0, but without the boot (legacy or HP splash) screen.

  (4) I opened the discount to zero the BIOS jumper and removed the battery for 5 minutes, several times.  No splash screen and press ESC or F10 after that reboot causes hang until you press Ctrl-Alt-Delete.

  I wouldn't have updated the BIOS if it is not for the security warning, as it worked very well. Now, I can't get into bios no more.  Help, please.

  Hello!  Yes, your right, it's the graphics driver!  But I had already updated just before I had this problem, so I rolled back the driver and still had the problem.  But then I realized that my TV is connected to the computer when I upgraded and downgraded the graphics driver.  I've updated the driver with the TV disconnected and VOILA, I see the spash screens and am able to get into the BIOS.  The graphic resolution of boot has been masking splash screens.  THANK YOU for your help.  I am very grateful.

• Cannot print.  Receive messages "The Document cannot be printed." "No pages selected.  Cannot print image.  I tried the suggested solution in wire 30/11/15, but that has not worked.  Have current printer driver.

  Cannot print.  Receive messages "The Document cannot be printed." "No pages selected.  Cannot print image.  I tried the suggested solution in wire 30/11/15, but that has not worked.  Have current printer driver.

  Hi cirjcus,

  In this case, I will propose you to perform a new installation of drive.

  Download Adobe Reader and Acrobat cleaning tool - Adobe Labs

  Adobe - Adobe Acrobat Reader DC Distribution

  Try again with DC first then with XI.

  Thank you

  Abhishek

• Cannot get into the BIOS on my Sat A30

  Hi all

  I have problems to enter the BIOS. I heard when I want to get into the BIOS I have to press the ESC key when Toshiba logo is shown in the startup.

  But nothing happens!

  Could someone help me?

  Sammy23

  Hi Sammy23
  That is right. It's actually the ESC you press. But there is more to know. During the time where appears the Toshiba logo, that represents about 1.5 seconds or so machine "listens" for the ESC at the beginning.
  Means that you have to be quick like a cat to press ESC. I usually press ESC several times all the way to the market (until the Toshiba Logo is displayed). Try this. Another way to get into the BIOS uses Toshiba HWSetup (looks like a key any) in the in the Windows Control Panel. You can access almost all the parameters of the BIOS from there.

  BR

  Tom

• Satellite Pro 6100: cannot get into the BIOS and does not start

  I have a portable Satellite pro 6100, en I was trying to boot from an external USB hard drive. When I activated the second hard drive option in the BIOS it has stopped booting all in all, I can't even get into the BIOS Setup more. All I get is "In touch with tomorrow TOSHIBA" screen with the icons to select the method of priming preferred manually after it's just blank screen with a cursor blinking in the upper left.

  Press ESC or F8 before to turn usually results in fast beeps sounds.
  Press tilde (~) before turn is reflected in the remaining space screen (not even the home toshiba screen appears) and slow Zens sounds.

  Apart from that I can't really do nothing at all.
  I tried to reset the BIOS by disconnecting the battery CMOS/RTC (hoewever, we call it) of the motherboard for a while with no results.

  Turn on/off without the results of HD internal in a white screen with an ERROR 'IDE #0.
  I can always stop by pressing the power button, you don't have to bother on the external hard drive it past I don't even want it works more.

  Suggestions?

  Hello

  I agree with Graeme. Your HARD drive is probably faulty. Sorry, but I don't think that you will be able to use the external HARD drive. The option in the BIOS is not for EXTERNAL HARD drive is just, I guess, for disk HARD placed in select Bay.

• T530: Cannot get into the bios

  Hello.

  The issue of this link does not seem to be solved with the last update of the BIOS (or it's a similar question).

  I'm running 2.04 and since I have set to UEFI boot only I can't get into the BIOS. When I press Enter to interrupt normal startup the screen goes black, it seems to interrupt the boot but nothing looms on the screen. Starting continues after a few seconds (I guess that after the time-out of the screen of the interruption).

  There seems to be a problem with the code modesetting, because if I connect to an external monitor to the VGA port everything works correctly.

  Note that what is happening with optimus, as well as with only the active Intel card.

  Thank you.

  This seems to be fixed with the last BIOS update (2.07).

  Although a little more comments would be welcome.

  Thank you.

• I have windows Vista Sp2. Cannot get into the BIOS. Computer does not start on the desktop. What can I do?

  Have Windows Vista SP2.  Switch on computer will go not on the desktop.  Tried to get into the BIOS, but get a blank screen.

  Someone at - it ideas. Thank you.

  Have Windows Vista SP2.  Switch on computer will go not on the desktop.  Tried to get into the BIOS, but get a blank screen.

  Someone at - it ideas. Thank you.

  Don't ned to start the Office before accessing the BIOS...

  The following tutorial is about changing the bios boot sequence.
  #1 step is how to get to the BIOS window. THIS show be what you need. You can skip the rest if they do not apply to you.
  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Cannot get into the bios of the start screen.

  Well I had run into trouble with my video card, and it had to be replaced. Before I do that but I was invited to try a system recovery to get rid of any possible program that was at the origin of defective symptoms of a video card.

  Well, I replaced the video card and everything has been fixed. But... because of the recovery of the system, some of my settings changed in Bios is returned back to default. I remember specifically in the Bios to disable the action keys (Fn + everything related F who did something).

  Problem is now I can't return to the Bios to change the settings once more.

  In order to dispel some of the suggestions more simple I tried already:

  Using another keyboard (allows me to enter the Setup program, reinstall system, diagnostics, etc. very well but not Bios)

  Unplug everything in the back, but the monitor and keyboard

  Erased from the memory CMOS, which led me to a screen saying that my Bios is set by default and to go to the configuration, press F10. But by pressing F10 led me to the single configuration screen and couldn't get into the BIOS.

  I carefully searched the internet to find answers for this problem, but I really hit a dead-end.

  I want to say I know that I've changed before setting on this computer it's just that I don't remember how. I mean I tried F1, F2, Del, Ctrl + Alt, and everything inbetween for shortcut keys enter the BIOS nothing helped.

  Thanks in advance for your reply eagerly to receive a response.

  Oh and I have a HP Pavilion Slimline s5260f, if that helps anything.

  Well fiddle with stuff I have solved my problem. Thing, it's actually, I couldn't have what I wanted through the BIOS screen. I remember he made on my friends computer to get rid of it, where their BIOS had more options.

  As for anyone with my problem (hit accidentally the Fn and the sleep button) I recommend that to go in Control Panel Power Options - then select doing nothing to hit the Sleep button.

• Re: Satellite C850D - impossible to get into the BIOS

  I'm unable to access the BIOS on this machine. I tried (a number of times) by pressing the FN and F2 and FN and F12 keys while the Toshiba logo is displayed. Unlike the Satellite A500, I have, no prompt for keys F2 or F12 doesn't appear at the bottom of the screen showing the Toshiba logo.

  I tried F2 and F12 keys without the FN key, but still no result.

  I need to be able to boot from the CD drive, but cannot get the BIOS to add this record to the boot sequence.

  Help pls.

  Rod.

  If you use Win8 you must make full stop at first. How to do that you can read on http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
  After the full stop restart your machine and press F12 to get into the boot menu. There, you can choose which device can be used as first boot device.

• Print on both sides of the page

  For printing on both sides of the page, the instructions say to FLIP on LONG EDGE or RETURN on SHORT EDGE.   WHAT WOULD BE THE CRITERIA FOR THE REVERSAL OF ONE WAY OR THE OTHER?  I'm printing docs on 8-1/2 x 11 paper. 1 set of docs is 14 unique pages that I could turn it into 7 if I could print on both sides.

  Instructions more tell - printer is will automatically load the back paper to print on the other side. Someone please help me understand these instructions?  Thank you.  Judy

  > to FLIP on LONG EDGE or RETURN on SHORT EDGE.

  This difference is important if you want to print portrait vs landscape.

  For the first case, you usually run flip on the long side, on the side.