How to hide the results of the formulas until the conditions are met

Similar Questions

• Hide the button until all Conditions are met?

  Please help!  I am creating a forklift safety training module. There are 12 buttons on the first slide (see screenshot 1); However, only 11 are visible at the beginning of the slide.  The 12^th button is a "continue" button that appears only after all the content slides (slides 2-12) were considered by the learner.  I used a conditional action to hide the button (something I learned from @Lilybiri) until all the conditions are met.

  
  

  The problem:

  The "Continue" button does not always appear once the content slides have been read.  I found I can do appear to ebb in each slide content, show the slides a few seconds more before returning to the main slide- which seems certain conditions which tells Captivate to display the button "continue".  Of course, I don't want the learners to face to the challenge of trying to understand why they cannot continue. I just want to visit the pages relating to each key to all conditions met.
  

  
  

  Screenshot 1: the initial screen (actions related to the change of color of button below)
  

  

  
  

  Screenshot 2: chronology of the page main interaction

  

  
  

  Screenshot 3: conditional Action to display the button CONTINUE (created as a decision 2nd out of action of 'Transport').

  My expectation was that OnEnter, slide would be recognized as read and count for the condition that all 11 pages of content would be considered before that appear the continue"" button.  I set the time to s 3.0 (see screenshot above) on all content slides.  No transition, no effect.
  

  

  
  

  Screenshot 4: each slide content is returned to the slide main interactivity by an OnSuccess: jump to the command of the slide.  Nothing special here.  I tried to reduce all the content slides to 1.5 s nothing works.

  

  
  

  Screenshot 5: an example of the page interaction BEFORE all the content slides were read and before 'CONTINUE' button appears (ignore the footer buttons; it was just me to experiment with styles of button).

  

  
  

  That's a lot, I know.  I wanted to cover the entire base.  I would appreciate your thoughts and your expertise.  Thank you in advance!

  
  

  Michael
  

  How about what is probably very close to what you have already made... (After double checking all of your shares advanced for bugs)

  Each main menu button sets the variable 'consulted' 1, hides the active button, show visited button, then jump to the content. Alternatively, you can put the action on the close button for each slide as you did.

  Then in your main menu, you will have the conditional action on enter that verifies that each variable 'seen' is 1. If it is true, then it will show your button continue.

  I use this method with almost all of the modules that are non-linear. I use it to display a button quiz start, tab summary etc...

  To check your programming that I'm down in a text caption that has all the variables, you will have to look and make sure that they change to 1 as it should. As soon as something does not change probably you have found your problem. Also make sure that none of your actions changed to continue if you have accidentally deleted an object or something similar.

  Also BTW: If you want to increment a variable, you use the action "expression" rather than "assignment." If you keep just assign 1 to a variable, all that you will ever get is 1. example: If the variable = 7 and you assign 1 then now variable = 1.  If you use the variable expression variable = + 1 then you will be able to increment. Also be careful if a user visits an article more than once because it increments the new variable unless you have a control to see if the content has been seen before, and then past increment. Otherwise they could visit the same section 11 times and then have the button continue become visible.

• "All the conditions are met" - not exactly?

  Hello again! I'm experimenting a little, set up a mock up of the slightly more complicated project of Captivate to help some of my practice of co-workers with Captivate. I am under a problem but with one of my examples:

  I put a map of the world and six text entry areas to invite a user to name the continents (except Antarctica). I attributed to each box TE an associated variable where it is placed, that is the entrance area of text on Europe is associated with linked a variable titled 'in Europe. I want the slide does not advance until all mailboxes of YOU are properly labelling of each continent.

  Currently, for each main entry text box, rather than by a single shipment, a peak action occurs which assigns the associative variables with a literal name. For example, for action advanced in North America, marked NA_Check, it has an action to display a caption saying 'okay' and assign the NorthAmerica variable with a literal: "North America".

  An advanced global action runs when a user is trying to push a "Continue" button that checks the State of the variables. The conditional action because its properties 'if' that all the conditions are met with Asia = 'Asia', Africa = 'Africa', etc. of all human beings "AND". I assumed that with all of them being 'AND' they must all be true for this check properly. However, I have separate legends for the success or failure, and for some reason all I have to do is to get two correct and I can go forward as if I was 100% correct.

  I thought that maybe it had to do with the variables being assigned prematurely, so I made an action on enter which assigns each variable with "0" so that the entry in the text box would be the only way to make the correct variables. This doesn't seem to work. Any thoughts? Why only do two of the 6 conditions for success when I list all necessary?

  I'm not sure. Maybe a bug in the code of Captivate?

  I think I might rather assign some values to variables and do some calculations, and proceed only if the result is equal to a specific value.

  But that's just me... Rick

• How to hide the Breadcrumb area level TAB of the model Page 2

  Hello
  
  I use the theme 16 and Page template 2 level tab.
  I'm not using Breadcrum, but default region of breadcrumb appears on the level 2 tab.
  
  Is it possible, I should hide the breadcrumb area.
  
  Thank you
  Deepak

  Hello

  I think you need to change the page template.

  Original copy for backup.

  Then edit the page template and remove those lines

  
  
  #REGION_POSITION_01#
  
  
  

  BR, Jari

• How to hide the remaining area bar reading is hidden?

  Hello

  I use 7 Captivate and one of my module design requires me to display the playback bar on specific training slides. I put my PlayBar to NOT show on overlay because that would cover the lower part of the screen shot of the application, so now the PlayBar is displayed outside the canvas area and does not interfere with anything on the screen. The problem is that on the siides where the PlayBar is hidden (assign cpcmdShowPlaybar = 0), there is a band of colorful at the bottom of the screen (where the playback bar would have been had visibility been lit), I don't want to have.

  How do I get there?

  Thank you

  Sean

  No way to change the resolution of the project at halfway, that is what you want: reduce the height when there is no playback bar. Would look funny too. Try to make the bottom border, which is what we will see when the PlayBar is hidden, in the same color as the background of your slides. I wanted to propose the PlayBar in overlay, but you don't want that.

• Hide the button if the Conditions are met

  I have a form that has 3 drop drop-down options 1, 2 and 3 in them.  I want to hide a button if '1' is selected any of the 3 boxes of drop-down list.  But the problem is I want what he re appear if the user changes his mind and wants to select 2 or 3.  So at any point and time I want the visible button if "1" is selected.  But I want it visible if none of the boxes have "1" or are empty.

  Thanks in advance for taking the time to help.

  Hello

  The script itself works. Not sure what prevents it from giving you the results you need without seeing (that is, it has to do with something other than the structure of the script itself).

  Check the following:

  • Set the values as numbers on all drop-down lists: 1,2,3 in the binding of the object palette tab
  • Make sure that the reference syntax is correct - if the drop-down lists reside in a different subform or other line in a table, you will need to make changes.
  • Make sure you have chosen formCalc on all drop-down lists
  • Make sure that you place the scripts on the Exit event - must be out event, change event no.
  • Make sure other scripts are not interfere - maybe, there are scripts attempts you have forgotten to remove
  • Use the "Check syntax of Script" button in the Script Editor
  • Check the newspaper for clues to guide you.

  It is the best help I can offer without seeing the form.

  Good luck

  Stephen

• Conditional liquid do not print when the conditions are met.

  I build a simple menu in British Colombia and for the purpose of this project, I'm going to be exposing this menu without using Module of menu in British Colombia. I use the following code:

  {% If globals.user.isLoggedIn contains 'true' %}}

  < id = "my-account-link" li > < a href = ' / my account "> < i class ="fa fa-diamond"> < / i > < span class ="-animate "> my account </span > < /a > < /li >

  < id li = "settings-link" > < a href = "/ my account-#settings" > < class i 'fa fa-sliders' = > < / i > < span class = "-animate" > my settings </span > < /a > < /li > ""

  < id = 'link-support' li > < a href = "/ my account/help" > < i class = "fa-fa-question-circle" > < / i > < span class = "-animate" > support </span > < /a > < /li >

  < id li = "logout link" > < a href = "/ LogOutProcess.aspx" > < class i 'fa-fa-sign-out' = > < / i > < span class = "-animate ' > Log Out < / span > < /a > < /li >" "

  {% other %}

  < id li = "connection-link" > < a href = "/ login" > < i class = "fa fa-sign-in" > < / i > < span class = "-animate" > Login / / Sign Up </span > < /a > < /li >

  {% endif %}

  I have used before with other snippets of code and this liquid condition print very well. For some reason, when I test the newspaper, the State still shows the wrong code even when I look through the JSON printed in the console object and the object user loggedin contains the value Boolean 'true '. Sort of at a loss as to why it is not printing when the user connects. Really want to use liquid on it and do not have to revert to the version JS of the hiding items.

  Thanks in advance to all! Best wishes!

  Well, I feel stupid, I was following the copy and the tutorials BC and pasted. Realized that I had to use operators such as "is" appropriate and «!» = ». I fixed it now

• check the table to see if all the conditions are met.

  Hello

  I want to see if all my items in my table have hit an area on the stage and got a bit doing wrong.

  the following code works:

  If (ball1.hitTestObject (Box) & & ball2.hitTestObject (box) & & ball3.hitTestObject (box)) {}

  trace ("Completed");

  }

  However, my goal is to have these movieClips stored in a table and would still like to call the hitTestFunction and AFTER THAT each item has hit the area to trigger an action, like that I could just add however items I want and keep the same line of code. Obviously if I set the table in a loop and assign [i], it's just going to join this element and the trigger, and I "m thinking that each property on the table could work it is just a matter of implementing a function to capture the right information. I hope this makes sense, and I appreciate your help.

  Try this. Loop breaks when it is not hit - so a single object success will leave false hit test.

  var ballsArray:Array = [ball1, ball2, ball3];
  
  function checkHits():void {
      var isAllHit:Boolean = false;
      for each(var ball:Sprite in ballsArray) {
          isAllHit = ball.hitTestObject(box);
          if (!isAllHit) {
              break;
          }
      }
      trace("all hit?", isAllHit);
  }
  

• How to hide the LOGO Apex region

  We use the apex of interactive reports that we want to integrate with a front-end web exist (window based). I want to hide the 'LOGO' region, as the end before the Wicket already takes care of the LOGO. How delete/hide the LOGO area.

  I suggest you open another thread for the other issue. You can close this thread if your question is answered.

• How to hide the names of the recipients when I send an email to many people?

  I'll send a message to a lot of people I know, and I think that some of them would rather not showing e-mail addresses. How to hide the?

  You use the BCC (blind carbon copy) field instead of the CC field to prevent one of the most complete list.

  • httpp: / /en.wikipedia.org/wiki/Blind_carbon_copy

  Probably there is a button on the edit page to reveal this field.

• How to hide the images used in imovie 10.1.2?

  I am a new user of iMovie and use the latest version. How to hide the photos that I already added to the film? Moreover, that mean the purple and orange lines on the photos? Thank you!

  You can not hide, but the orange lines at the bottom of the clips in the media pane show what parts of clips have been used in the scenario, if you can easily avoid reuse them if that's what you want to do.  The purple lines at the top of some parts of some clips show moved excessive (which cannot be stabilized).

  Geoff.

• How to hide the menu item 'bookmarks '?

  Firefox 5.0.1
  At the menu bar: 'File', 'Edit', 'View', 'History', "Bookmarks", etc.
  How to hide the element of "bookmarks"?
  I have the add-on PLAINOLDFAVORITES installed and
  I forgot how with v3.6.18.
  

  Thank you very much
  

  Click the Firefox button and click on Add-ons -> Add-ons Manager, tab opens-> go to Control Panel Extensions-> select your add-on "Favorite PlainOld" , click Options

  Check and tell if its working.

• How to hide the sidebar with other files of Notes?

  OS X El Capitan (10.11.3)

  I am trying to read a PDF Acrobat Pro and take notes with Notes in my mac, side by side.

  I would like to know how to hide the sidebar on the left of Notes, where are the names of the other file.

  I don't want the files, I already went to 'View' and you click "hide files".

  I can just see the writing of the Notes area while sharing the screen with the document I read in Acrobat Pro.

  Looks like a basic feature which Apple or Adobe Acrobat Pro should have, but I can't seem to find it.

  Looked for other solutions to the App Store, but what I've found is a bit expensive.

  I appreciate any assistance.

  I asked that your thread moved to the El Capitan forum.

• How to hide the photos in my iPhone 6 more?

  Hello Apple!

  I searched for tutorials on how to hide the photos in my "Photos" application They say that, I will select a photo, then press on hold... then action will pop up with the options "Copy" and "hide".

  To do this, do not show the "copy" and "Hide" options.

  Why? Is there a function I need to activate?

  Thank you.

  Hello Apple!

  It is a user at tech support forum, not Apple.  Nobody is here saying 'why' Apple does or doesn't do anything.

• How to hide the button only break on the toolbar at run time

  Hello

  I had to hide all the buttons as run, run streaming, vi and other abandoned by accessing the properties VI and by unchecking the corresponding options.

  When I run the vi, everything becomes hide except the pause button and I found no option to hide manually as well as programmatically.

  can someone tell me how to hide the pause button. I have an urgent need for same.

  Thank you best regards &,.

  Samriddh Sarbalhi

  Hello

  You need...

  Properties of VI--> execution

  Turn off "enable debugging".

  Rod.