cannot repair broken links
Hello
I've got broken 267 links on a single page, all the images.
There seems to be no difference between the survivors of the links and broken links,
I tried to fix the links in the link Inspector and the properties panel, which failed.
I think that it can take a long time to fix, so I don't want to go down the wrong paths, especially with me being a relative newbee a whole.
The page in question is here:
http://denchworthponds.co.UK/pond%20Construction.html
It's a site heavy image in which each image has
a miniature, a miniature bearing and a great lightbox image that is activated when you click on the thumbnail
122 links are OK, 267 links are broken.
I didn't notice before I downloaded the site as happening in "Preview in browser".
Maybe the problem is in my code - I hope so.
Would it be one of the following values?
1 / the pictures are in the image files in the folder of images on my local site, it's a bad habit to have folders in the folders on my local site? (i've got charges)
2 / since registration (for the Web and devices) the images on my local site, I have many of them reopened in photoshop for alteration of the image, I was checking for an increase in file size so I did change the images, but do not see. Then, of course, I saved their return in the same folder with the same name etc. Was the problem that I simply recorded images and is not saved for the Web and devices? -they were already optimized. (some images have been changed manually, others using the Actions palette)
3 / some of the file names are probably not friendly DW, for example;
the pond6thumb4 file is located in my 12pondbuild6 4/11 folder,
DW reads this folder as 12pondbuild6 4% 3 a 11 - that is the problem?
(and, as I say, this folder is inside the Images folder on my local site)
The mystery to me is that 122 links are not broken, and I see no difference between the survivor and the broken links. It all seems a bit arbitory.
I'm running CS5.5 on a 2007 iMac core duo desktop computer.
Any thoughts anyone?
Thank you for your time and greycells in advance
-Shaun
Yes OK, it was indeed the names of folders:
change 12pondbuild6 4/11
What DW reads like 12pondbuild6 4% 3 to 11
at 12pondbuild6
-and then you can fix the link in the link checker
-I think he'll be a night loong.
-Shaun
Tags: Dreamweaver
Similar Questions
-
I don't know how to repair broken links
Hello, I am trying to fix the broken links for an assignment in Dreamweaver CS5 C7 and I couldn't find any instructions on how to repair broken links... How do we?
The easiest way is to remove the old links and insert new via the link field in the properties panel.
Nancy O.
-
Convert P65 without Pagemaker files to repair broken links?
I just bought InDesign Pagemaker is no longer available, but I have P65 files that have a broken because of new hardware and software link and need to be reconnected in Pagemaker if I just get a blank page. I can't Pagemaker somewhere? Or is there a way around this?
I cracked it! I did go through all the relevant files to write notes addresses file and when I tried to convert again, IT WORKED. The file opened, some of the captions and headings are passed and some of the most recent illustrations are missing but its OK. I tried to fix the first link and after waiting about a minute he told me that he had repaired 77 links!
-
I'm on RH8. I have a broken link, which I can't get rid of. When I try to import the htm, HR gives me a message that the subject is already in the project file. Is there a way to fix this? Or what I need to do something weird like delete the subject of this project and then re-import to get rid of the broken link?
The key is that you can't have two files of the same name in a project, unless they are in different folders. So, you could import the file in a different folder or delete the other file. Only you can say what action is best.
-
How can I remove a broken link?
You don't really know if there is a better way to put it. Basically my browser is to register a bookmark, but nothing more than his name; no location, nothing (see the url of the image: http://tinypic.com/r/2n1z4x/5).
It cannot be deleted or moved or whatever it is. It isn't really much of a problem more that all bookmarks below don't appear in the menu of the toolbar, but I don't want it if possible.Because the bookmarks file is actually readable in Notepad ++, I think it's the broken link (given the entry until it is the bookmark located directly above the toolbar):
{'index': 2, 'title': 'Tags', 'id': 4, 'parent': 1, 'dateAdded': 1357947259755000, 'lastModified': 1357947259755000, 'type': ' text/x-moz-place-container', 'root': "tagsFolder", "children": []}
Assuming that is the question, I would be fine in just this deletion or would do a different course of action?
Would be back up and then restore the question clearly?You can check for problems with the database places.sqlite file in the Firefox profile folder.
-
Broken link for the Download Center - Windows XP Service Pack 3 - file to Image CD ISO-9660
Need to make a physical copy to repair the machine. The Download Center seems to have a broken link when you try to save the file.
DOWNLOAD: WindowsXP-KB936929-SP3 - x 86 - ENU.exe
-
How to fix "Startup Repair cannot repair this computer automatically.
My computer not boot not correctly. I just get a blue page with an error message that says "Startup Repair cannot repair this computer automatically." How can I fix?
The following problems:Problem event name: StartupRepairV2
Signature of the problem 01: AutoFailover
Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
03:6 problem signature
Signature of the 04:1114129 problem
Signature of the problem 05: 0xa0
Signature of the problem 06: 0xa0
Signature of the problem 07:0
Signature problem 08:2
Signature of the problem 09: WrpRepair
Signature of the 10:1168 problem
OS version: 6.0.6001.2.1.0.256.1
Locale ID: 1033Hello
First disconnect the external devices connected to the computer except the mouse and keyboard.
Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.
As Windows automatically launches the Startup Repair tool there is a possibility that she cannot cross the whole scan problems.
I suggest that you do the startup repair using the Windows Vista installation disc and check if it works.
If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.
1. Insert the installation disc.
2. restart your computer.
Click the Start button, click the arrow next to the lock button, and then click restart.
3. If you are prompted, press any key to start Windows from the installation disc.
Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
4. choose your language settings, and then click Next.
5. click on Repair your computer.
6. Select the operating system you want to repair, and then click Next.
7. in the System Recovery Options menu, click Startup Repair.
Check out the link for more information below.
http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problemIf startup repair does not resolve the issue then in the same way using the windows vista disc try to restore system until the day where computer was working fine.
I hope this helps!
-
[RS] Cannot repair the military record
My laptop has a file that apparently is corrupt. When I ran ' sfc/scannow' and then checked the CBS log file, I found this line state that Member's file is not repairable. It occurs in several lines.
[RS] Cannot repair the military record [l:18 {9}] "img33.jpg" Microsoft-Windows-Shell-paper painted-Common, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
Hello
Thanks for the reply with the status of the issue.
I will help you further this issue. If I understand correctly you have a problem with the installation of Internet Explorer 9 and to resolve this problem, you run System File Checker tool scan. And while the scan that he gave you it has file system damaged in your computer.
You have the Windows Vista installation disc?
I would suggest trying the following methods and check if it works for you.
Method 1:
Try to perform the Startup Repair.
Startup Repair: frequently asked questions
Method 2:
If you haven't tried the steps in the following Microsoft article, then I suggest you to try and check.
How to reinstall or repair Internet Explorer in Windows 7, Windows Vista and Windows XP:
http://support.Microsoft.com/kb/318378
Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
Also check the following link to resolve installation of Internet Explorer 9 associated problems.
http://support.Microsoft.com/kb/2409098
Please reply with the status of the issue, so that we can better help you.
-
Windows cannot repair this computer automatically
Original title "Help? Laptop used to start.
My laptop was working fine and then I went to turn it on and it keeps trying to windows startup repair and then says "windows cannot repair this computer automatically" if I click on problem it details reads as follows: StartupRepair V2AutoFailover
CorruptFile, etc..
It shows a ton of different ' problem signatures and a group of numbers too? He repeated also unplug all devices recently attached to calculate as a camera or portable music player? Don't attach something like that again?
Any ideas what would cause this and how or if I can fix it? IM wondering if my teenagers attached ipod or iphone and done something stupid? Help?
Hello
1 did you do changes on the computer before the show?
2. What is the brand and model of the laptop?Method 1:
You can start the computer in safe mode and check if you are able to start
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeMethod 2:
You can also perform a clean boot and check:
http://support.Microsoft.com/kb/929135
Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
Method 3:
If you are able to boot into safe mode perform control and restoration of the system:Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
You can consult the links for:
System restore
http://Windows.Microsoft.com/en-us/Windows-Vista/What-is-System-Restore
System Restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
Method 4:
Alternatively, you can run using the Windows Vista DVD startup repair.
You can check the links:
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questionsClick on the link below:
What to do if Windows does not start correctly
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly -
Does not work Vista startup repair cannot repair, System Restore cannot repair.
I have a Dell Inspiron with Windows Vista. On commissioning, it is said: "Windows could not start. A recent hardware or software change might be the cause. "then offer to 'Launch Startup Repair' or 'start Windows normally '.
When asked to boot normally, it tries to start, but broken, return back to this page.
When he was asked to run the Startup Repair, it opens the program scans the system for several minutes and then says "Startup Repair cannot repair this computer automatically.When we click on diagnostics and repair details, it is said:
"Last startup successfully: 03/10/2011 15:42:52.
Number of repair attempts: 8Details of the session
Drive system = \Device\Harddisk
Windows directory = C:\Windows
AutoChk run = 0
Number of root causes = 1The test is performed:
Name: Search for updates
Result: Completed successfully. Error code = 0 x 0
Name: Drive for System Test
Result: Completed successfully. Error code = 0 x 0
Name: Troubleshooting disk
Result: Completed successfully. Error code = 0 x 0
Name: Metadata for the drive Test
Result: Completed successfully. Error code = 0 x 0
Name: Target OS Test
Result: Completed successfully. Error code = 0 x 0
Name: Checking content Volume
Result: Completed successfully. Error code = 0 x 0
Name: Diagnostic Boot manager
Result: Completed successfully. Error code = 0 x 0
Name: Diagnosis of the system startup log
Result: Completed successfully. Error code = 0 x 0
Name: event log diagnosis
Result: Completed successfully. Error code = 0 x 0
Rated: Internal audit of State
Result: Completed successfully. Error code = 0 x 0Root cause found:
Startup Repair tried several times but still not determine the cause of the problem. »If not, we can look at the advanced settings:
System Restore = "no restore point created the disk of your computer system. To create a restore point open System Protection.
Windows complete PC Restore = "a valid backup location is not found. Windows cannot find a backup on this computer. »
= Windows Memory Diagnostic tool does not solve anything when parsing
Command prompt
Reference Dell Factory Image Restore = not tried but am avoiding wiping all your own hard drive for as long as possible...He's not in Mode safe, and I don't know what is happening. It happened when I shut it down (holding the power button down) update that it had frozen.
What should I do? Thank you.Hello
Method 1: I suggest that you do the startup repair using the Windows Vista installation disc and check if it works.
If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.
a. Insert the installation disc.
b. restart your computer.
Click the Start button, click the arrow next to the button lock and then click on restart.
c. If prompted, press any key to start Windows from the installation disc.
Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
d. choose your language settings, and then click Next.
e. click on repair your computer.
f. Select the operating system you want to repair, and then click Next.
g. in the System Recovery Options menu, click Startup Repair.
See: How can I fix a startup (startup)?
http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem
Method 2: If above method fails, then run the command chkdsk WinRE (Windows Recovery Environment) and check if it solves the problem:
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
Note: Select command prompt from the system recovery options and follow the mentioned below as follows:
Type the following command and press ENTER.
Chkdsk /r
Note: Chkdsk /r command erases / corrupted hard disk data corrections. Some of your personal files/data may be erased.
-
Startup Repair cannot repair this computer StartUpRepairV2
I have problems with the phone of my son he needs for the University and suggestions for this problem will be very appreciated.
It is a Dell Inspiron 6400 running on Vista BasicHe had a problem with Windows Update, refusing to update and tried to run a few tests to sort, but everything that he created more serious problems
When we start the laptop: cannot start, and the startup repair Windows checks the problems with the following details:Startup Repair cannot repair this computer automatically
Problem event name StartupRepairV2
Signature of the problem 01: AutoFailover
Signature of the problem 02: 6.0.6000.16386.6.0.6000.16386
03:6 problem signature
Signature of the 04:393222 problem
Signature of the problem 05: FailureDuringSetup
Signature of the 06 problem: FailureDuringSetup
Signature of the problem 07:0
Signature of the 08:0 problem
Signature of the 09 problem: unknown
Signature of the 10:1166 problem
Version of the OS 6.0.6000.2.0.0.256.1
Locale d: 1033Tasks already tried in the F8 Advanced Boot Options:
In Safe Mode: loading Windows files:- then screen arrow black cursor may moveLast good known Configuration: runs as if laptop will start and goes to black screen - can move cursor arrow
I also tried to run with the disc that came with the laptop and found no backup configuration or previous.
Tasks already tried in the F8 Advanced Boot Options:
In Safe Mode: loading Windows files:- then screen arrow black cursor may moveLast good known Configuration: runs as if laptop will start and goes to black screen - can move cursor arrow
I also tried to run with the disc that came with the laptop:
Restore the files system and settings: no restore points are created on your computer's system disk
Windows complete PC Restore: no backup locations valid not found but gives options to insert the location: Date and time: computer: but it won't allow me to enter anything.
Command prompt: X:\Windows\system32 >
Thanks Robert
I suggest you start troubleshooting with the following diagnostic tests. They will save you a lot of time and grief if there is a hardware failure, and you have records on site in case you need it in the future:
H/W Diagnostics:
Please start by running the diagnostics bootable hardware:
http://www.carrona.org/memdiag.html (read the details at the link)
http://www.carrona.org/hddiag.html (read the details at the link)Post back with the results of the tests and we'll go from there.
-John ( http://www.carrona.org/index.html ) -
Cannot repair this computer automatically in windows 7
Whenever I try to start my computer it tells me Windows boot using the Startup Repair. Whenever I do this it says that it cannot repair this computer automatically. In the details of the problem, it reads
Signature of the problem:
Problem event name: StartupRepairOffline
Signature of the problem 01: 6.1.7600.16385
Signature of the problem 02: 6.1.7600.16385
Signature of the problem 03: unknown
Signature of the 04:121 problem
Signature of the problem 05: AutoFailover
Signature of problem 06: 1
Signature of the problem 07: NoRootCause
OS version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
I always did this whenever the computer automatically updated. I can restore it, but then it just updates later that day here. Help, please!
Original title: update Windows 7 send my computer in Startup Repair every time
Hello
Please contact Microsoft Community.
I understand that you are faced with the question on the Startup Repair.
I will definitely help you with this.
I suggest you go through the link below:
See the suggestions that were marked as answer in the link below:
I hope this helps. Please post back with the State of the question and we will be happy to help you further.
-
Newbie using ID CS5:
I have to many broken links to images that I don't have, and I suspect that they are not used. The guy from the printer needs for me to fix all broken links, and I don't know how. How, in the name of Elvis, do you take a broken link on the links palette when you know that the image is no longer in use.
I'm not a guy ID; I'm just someone doing a favor. If someone could do me a favor and tell me how to do this, I might be able to put an end to this nightmare. And I will try to return the favor if I can.
Links are just pointers to an external file. By linking data image InDesing is able to keep the size of the reasonable document and the performance is acceptable. Average links missing tha the pointer is no longer valid and ID cannot find the file in the original location. This can happen for various reasons, in general is the file has been transferred to a new user who has no access to the location files original (and who is often accompanied by a failure to provide the linked files, during the transfer), or sometimes a person moves or renames something and the path is broken.
IF you have received all the files that are supposed to be related you can republish them and solve your problem. The easiest way is to put them in the same folder as the document and let ID find automatically when you reopen the doc. If you were not given these external files, you must go to the one who made the file and ask for them.
-
A broken link in RH8 - details please
Dear Experts,
I tried following in the other displayed items relating to this topic, but they all appeared to be different from what I am seeign in my project. I know how to fix borken links (for example) in the files themselves, however, when the current folder "links" in the project manager, I can't delete the links are no longer needed, or to see clearly if I still need them, it's a bit overwhelming, as I moved some information within a project, and (while my application kept crashing - another story) whenever I have re-opened, it does not seem to clear the changes I'd made through caching clear as I have in my game to the top.
Within the MP, if I right click on the broken link, I do not get an option to explore, I have only the following:
However, when I click on restore in this dialog box, or even if I select the see the link and try and restore, nothing happens. I tried to correct current in one of the real issues and remove the link and then re - insert it and then by recording information, and remains. Unfortunately, I broke the links to the real topics that are used throughout the entire project, (as fundamental for the generic search and other things)... so it has now created havoc for me, and I can't seem to start with a single. I know if I can get a course, I will be able to quickly correct others, but he cannot know. (probably right under my nose).
This sounds like there is unsaved when changes to your project the project / PC crashed. As a result, RoboHelp got a little lost as to what should be there. I think that the answer must first close your project backup and then delete the file from the DPC project. If the poster project always broken, links open files individual topic links and ensure they point to the right file. It may be preferable to reinsert the links. Save as you go, and I hope that broken links will disappear. Let us know how you go.
-
Hello
I have a long list of broken links in my project that I am unable to solve. I have tried 3 things:
I ran the report of broken links, and the entry for each broken link says "lack of subject xyz.htm is referenced by the following:"However, the report does not list what refers the subject. "
If I right click on a link that is broken (from the project tab) and select Show the topic links in the menu that appears, RoboHelp displays an icon for the item in the right pane. However, there are no links to the topic. And question mark icon is red instead of the typical blue.
If I right click on a link that is broken (from the project tab) and select see references in the menu that appears, RoboHelp shows the window of the section references. This window lists the "missing section", but no mention of lists. When I click on the button restore, I get this error message: the file name is not valid. The character "#" cannot be used in a pathname.
All of my missing items have the # in the name. For example,.
some_topic.htm #IX_reporting
I think that these 'missing subjects' were created when I import a word document into the project. Anyone have an idea how I can remove and resolve these links broken?
Thank you!
Thanks Peter. In fact, I didn't have to try both methods. The bonds broken is solved... as if by magic it seems. Perhaps, I closed and reopened the project enough times.
Maybe you are looking for
-
How to resolve the Windows Update error Code 0 x 00070424
Trying to manually get updates to Windows Security Essentials, I keep getting the above error code?
-
HP G60-445DX coprocessor error 28 after the installation of 64-bit Windows 8
I'm starting to think the driver is not available, but maybe it's here somewhere. I installed the NVIDIA chipset and it does not help.
-
the IP address of the MGT network used in the interface of BVI1
We strive to implement the autonomous AP using mgt address in the BVI1 interface, but without success. Would appreciate another set of eyes looking at it. The client authenticates with server radius very well but no IP address is assigned to the cust
-
Former title: yellow triangle wireless My computer can connect to the wireless router but cannot connect to the internet. I try to connect with the ethernet with cable modem connection & it still does not work. The other laptop works fine but my does
-
DataList-tag not supported inside Photoshop panels?
<div> <input type="text" list="stuff" placeholder="Item type"> <datalist id="stuff"> <option>Item 1</option> <option>Item 2</option> <option>Item 3</option> <option>Item 4</option> </datalist> </div> It wor