HP G60-445DX coprocessor error 28 after the installation of 64-bit Windows 8

Similar Questions

• HP Elite Book 8460p: shortage of pilots after the Installation of 32-bit Windows 7 Home Premium HP EliteBook 8460p Base model No.

  Lack of drivers after installing Windows 7 Home Premium 32-bit
  
  Basic HP EliteBook notebook PC model 8460 p
  
  Model #: WX562AV
  
  [personal information]
  
  1. base device driver
  
  PCI Slot 2 (bus PCI 36, device 0, function 1)
  
  PCI\VEN_197B & DEV_2392 & SUBSYS_161C103C & REV_30
  
  PCI\VEN_197B & DEV_2392 & SUBSYS_161C103C
  
  PCI\VEN_197B & DEV_2392 & CC_088000
  
  PCI\VEN_197B & DEV_2392 & CC_0880
  
  
  
  1 unknown Devices
  
  It is said that
  
  ACPI\HPQ0004
  
  * HPQ0004
  
  
  
  2 unknown Device
  
  USB\VID_138A & PID_003C & REV_0086
  
  USB\VID_138A & PID_003C

  Hello

  In the order displayed, you need:

  Card reader driver.

  HP 3D DriveGuard.

  Validity sensor driver.

  Kind regards

  DP - K

• This is the 1935 error once again, the installation of Norton Ghost Windows 7 64 bit

  Hi, I say 'yet' because it's a frequently asked question, unfortunately with no viable solutions.

  I installed Norton Ghost 15 on this machine 3 years ago. No problems. Today, when you pull up the ghost, she suddenly want to run the MSI installer for some reason any and then complains about something. Unfortunately I got a copy of the error. I just uninstalled completely, using the Symantec removal tool.

  When you try to install Norton Ghost again, I get this:

  

  I unchecked .net framework 3.5 in Windows features, rebooted, checked again and rebooted. I installed Microsoft C++ 2005 and 2008 Redistributable. This I did because another post suggested to do this.

  I also activated the journal feature detailed in the Windows installation program and get a huge file full of data, which tell me what I can use. Yes, something went wrong shot, but in this (these) file (s) there is no special section that stands out in a way that tells me that what in fact was wrong.

  Now, is say, not possible to obtain information in plain language? Saying that the Assembly is absent, this file is missing and so on. Because obviously something is not here that should be there, who were 3 years ago, when Norton Ghost installation went flawless.

  Or is it something else? "An error occurred during the installation of assembly component", which component? And what is normally the cause of this problem, which will normally not when an assembly component cannot be installed?

  
  My question basically goes like this:

  How can I know what is the real error? Assembly that is missing, have what is missing? The blind approach isn't trying for me, there must be a scientific way of this approach!

  Any help appreciated!

  -Ingvar

  OK, I found the solution:

  Error 1935 resolved

  Big - just install Ghost until the error message. Do NOT click OK, instead, use task or much better, Manager procedure such as SysInternals Monitor to kill all processes of msi windows installer and everything that has nothing to do with Norton.

  Ghost 15 is now installed and you can register and use it.

  Problem is, there is a current cancellation, who will run the next time you want to install (all) application.

  Delete these registry keys:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\InProgress

  and

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\InProgress\Rollback

  Now, everything should be good, at least it looks so here!

  Detective Conan.

  -Ingvar

• CS6 16 error Code after the installation of the new computer.

  I just bought a new Mac Pro desktop. My old machine used Snow Lepoard and it comes to Mountain Lion.  After that the migration of data from my ole machine to this one, I can't open any program in CS6. When I try, I get an error 16 advising me to uninstall and reinstall the software. This would result in a couple of years of updates, etc.  How can I fix this problem?

  Please check your Setup logs for specific error messages that may occur during the installation process. You can find details on how to review the Setup logs to solve problems with install newspapers | CS5.5, CS5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

• SATELLITE A30 ERROR! AFTER THE INSTALLATION OF RECOVERY DISKS

  INSTALLED BOTH DISKS AS MANUAL... GET THE ERROR MESSAGE... AT THE END OF DISC 2. CAN FIND NO WAY OUT OR FOLLOWING THE INSTALLATION... REMOVED DISC SEVERAL TIMES AND BEGAN THE PROCEEDINGS WITH THE SAME RESULT. NO ERROR; MESSAGE 437... ; CANNOT READ THE FILE... LOADS OF OTHER WRITTEN IS ALSO ON THE SCREEN... I THEN PRESS ESCAPE; AND HE LOOKS LIKE HE NEEDS A CASE NUMBER? NOW I REMOVE THE DISC; I CANNOT START THE SAME PROCEDURE TO NEW NOTHING WORKS ON PC...
  DISKS CAME WITH THE PC AND I'VE USED THEM TWICE MORE EASILY
  LAPTOP CODE A30 (PSA30E) 14 OLD WORK OK SOMETIMES SAID HE WOULD HAVE TO CLOSE BECAUSE THE GENERIC HOST HAD ENCOUNTERED A PROBLEM... RECOVERY DISKS ARE NOT SCRATCHED CAN ANYONE HELP?

  Hello

  upgrade your laptop with a special as material upgrading of RAM or else!
  It may be that an upgrade of hardware are problems when you use the recovery of th disc!

  Alternatively, you can try to reset the default BIOS settings.

  Sammy Bye

• Windows Media Player Album Cover Art disappeared after the installation of 11 Explorer (Windows 7)

  A large part of my cover art of the album disappeared from Windows Media Player after installing Explorer 11 (using Windows 7). It's hundreds of albums and for art that was already present before installing Explorer 11. The number of albums is to manually replace the work a tedious task seriously.

  It's the same thing with the installation of Explorer 10, but less than albums, so I learned to live with it. But it's now on a ridiculous on the part of the library.

  Can someone tell me where the art is gone? And why?

  If there is a way to replace it without doing a search for each album with missing art?

  If she is still on my computer somewhere, but is no longer connected to the media player?

  Where the cover of the album art in general is maintained? I can not even understand this, using my computer or go to my account to backup Carbonite.

  Thanks for any help.

  Hi Jamie...

  Your album covers on album is in application data files and it will always be there. There is obviously a problem somewhere and it can be if you rebuild your library of wmp that the work will return. I guess you can still see the piece in the album files ok - Yes?

  First of all if I should run the Fix It tool and the sfc scanner - after that restart your pc and see if anything has changed. (The scannow sfc tool will report if there are errors, it cannot fix)

  Fix - download and run the tool for WMP (all problem areas)

  http://Support2.Microsoft.com/FixIt/?WA=wsignin1.0

  sfc scannow - follow the instructions here.

  http://support.Microsoft.com/kb/929833/en-us

  After making such a report and we will then rebuild your wmp library if necessary.

  Ric.

  Afterthought - memory I got a screenshot of the cache of art, so here it is. It is also a "hidden" folder (you can tell by the gray look), that's why you don't find it easily!

  

• BlackBerry Z10 Print to Go has stopped working after the installation of KB2992611 on Windows 7 for x 64 system

  A large number of reviews and safety notice associated Microsoft updates showed in place on November 11, 2014 that were installed. Subsequently several failures that happened after the reboot (i.e. IE would freeze at start-up, Print to Go

  the stoppage of work - has indicated that there is no connection to the Internet, the PrintToGoLog.txt had much more detail).

  Other users of similar problem after a reported BB playbook KB2992611 updates has been applied,

  After KB2992611 (a security update for Windows 7 for x 64 system) has been uninstalled, Print To Go was working properly. Unfortunately, it is still not. Firefox is OK.

  Thanks for the info, this will help others with the same question.

  That KB was for all windows systems, but was mainly for Win Vista business.

  You can reset IE in Internet properties, program tab, or download another or do a system restore to November 10.

  Firefox is not affected because it is not incorporated in the system as IE.

• Equium L100: error memory after the installation of 2 modules

  I changed the default RAM in a L100 to 5300 2 x 512 MB sticks. When I install 2 sticks of memory vivid I get memory errors. I have run 2 different controls of RAM (Win diag and memtest86 and these problems).

  Now, when I use only one of the sticks, I don't get problems with memory and RAM checks are clear at all. This is the case for the 2 sticks of RAM.

  Also, if I use the original with either 512 MB sticks 256 MB stick, I don't get the error of RAM.

  I could with some suggestions here, please. In fact, I'm pretty sure that the RAM bars are OK?

  Any help would be appreciated
  see you soon
  brand

  Hello

  It s very strange. You bought 2 memory modules similar to 100%?
  It seems that these two modules are not compatible together.
  This seems very strange but it is possible.

  I thought the second ram slot could be corrupted, but you post the original 256 MB and 512 MB additional module worked correctly. So, it seems that the second location is ok.

  I put t know which modules you use, but I found these compatible parts:
  DDR2-533 256 MB (PA3389U - 2M 25)
  512 MB DDR2-533 PA3412U - 2 M (51)
  1 GB OF DDR2-533 (PA3411U-2M1G)

• You can remove the flash drive after the installation is complete and Windows is completely implemented?

  Have finished installing 10 Windows on my Mac, I'm too afraid to leave the flash drive, I used in the process. Is it OK to take it out now? Or the downoads will be lost?

  Yes. Do not forget that you eject it before you disconnect it.

• Windows 7 - lost all contacts in 2 e-mail accounts after the installation of update of Windows Live Mail 2011 Essentuals

  What happened to all my contacts and how to bring them back?

  Import your emails, contacts and calendar in Windows Live Mail:
  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/fe9544b8-9f3c-4d85-8201-c0f3daaadb68 releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Windows 7 does not start after the installation of updates - sounds familiar!

  Apparently, I have another system that no longer starts after you install an update to Windows 7. New kick computer _ I have to disable the automatic update of windows. Twice I had to restore the system in the first week because he hung up after the installation of updates for windows 7. I have no idea what update is the cause of the problem.

  Essentially, start the screen goes black with the cursor blinking in the upper left corner of the screen. The only way out is to restore the system.

  Does anyone know what update is the culpret? HP support has no idea. Their only solution was to update windows 7 to 'never download an update from windows '. It is a terrible thing to be underestimated solution.

  Here's the resolution...

  I installed all the updates except KB2284742 954430, 973688 and 971033. So I decided to install these 1 4 at a time in the order shown. I installed successfully 228472 and 954430 and 973688 disappeared from the list of available updates. So I installed 971033 and it installed successfully and I was still able to restart.

  My conclusion is that there is a conflict between the first 3 updates when they are installed at the same time.

  Now my system is up to date with all windows updates and I'm able to restart without any problems!

  Close this message.

• Remote Desktop disappeared after the installation of SP1?

  my remote desktop option disappeared from "Remote Settings" after the installation of sp1 on windows 7
  What can be the problem and how can I solve this problem?
  There is no problems during installation of the service pack

  Click Start, type allow remote access, and then click this option to set up.

• LSD unexpected closing of the errors after the installation of el capitan

  LSD unexpected closing of the errors after the installation of el capitan

  get a lot of errors after start-up and during work

  This procedure will remove some cache files. The files are generated automatically and do not contain any of your data. Sometimes they can become corrupted and cause problems like yours.

  Please, back up all data.

  Triple-click anywhere in the line of text below on this page to select this option:

  open $TMPDIR..

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing command + V. Depending on the web browser you use, you may need to press the return key. A folder with a long, random name should open. Inside, there should be a subfolder named 'C '. Drag that to the trash.

  Log off or restart the computer. Empty the trash. Test.

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• Error 1068 when you try to start the WIA service after the installation of the W7 SP1

  Original title; Error 1068 when you try to start the WIA service after the installation of the W7 SP1. The scaner to my Epson Workforce 633 all-in-One printer does not work after that.

  SCANeR to my Epson Workforce 633 all-in-One printer does not work after the installation of the W7 SP1. I contacted Epson support and they told me I had to contact MS support to get help this isue. The problem is that something is not letting the WIA service to start and I am getting error 1068 when you try to start the WIA service.

  Hello

  Method 1: Try to uninstall and reinstall Epson drivers and related software.

  Visit our articles to do the same below:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Method 2: Also scan SFC (System File Checker) on the computer.
   http://support.Microsoft.com/kb/929833

  Hope this information helps.