Cannot resize the image pasted on layer Photoshop CC 2015

Similar Questions

• Cannot resize the image.

  Hi, when I copy paste or open a new image in photoshop (cs6), I'm not able to find the arrows of resizing the image I used above. What should I do? Help, please. I clicked on the selectool tool, but I simply can't resize my image more.

  I think you can see the "controls turn Show" You Move tool settings...

  

• Resize the image manually in pixel (photoshop CC)

  Hello everyone.

  I want to resize image original size is 585 585 pixel-to-pixel x 1920 x 850.

  I go to image-> image size

  I have change the width to 1920, but the height automatically also changed to 1920. How can I make 1920w x 850 h?

  Thanking you in advance.

  

  It is fixed. It's because I'm not a not select the link and remove the link. Thank you!

• Photoshop CC: Have a template that I transferred the image to.  The image is too small.  How to resize the image in the template?  Or I have to go to the file original image and resize here over and over again until I have found the right person?

  I have a model I am able to plug different images at different times.  The problem is when I plug an image in this template, I think that the image is either too big or too small.  Is it possible to connect the image in the template and resize the image (and not the template itself) OR I have to go into the file with the original image and resize them it there and then try to plug it into the model to see if it fits - and if it does not fit, return to the original with the image file and resize it again and see if this fits - and so on and so on...?  "" I tried the "image size" option, but it's all or nothing - especially miss!

  Thank you!

  First, make sure that the original image is larger that you need. It is easier to delete pixels that so add nonexistent pixels.

  Place the image in the template.

  In the menu filters, choose Convert to smart object. (Make sure that the image layer is selected before doing this step)

  Now reduce the size of the image of what you need (ctrl-t or cmd - t) when satisfied click return/enter.

  Because the image layer is a smart object, you can replace the inner image in another image and the scale will remain the same. You will find the option to replace the image in the layers > smart menu object.

  If you need assistance more let us know.

• When I use Paste the Image to the Clipboard as stamp tool, I can't resize the image.

  Add a picture as a stamp of release in our .pdfs. Normally I can resize the image to fit what I need.  Sometimes, it works fine and I can resize the image.  Other times I can't.  I used "Ctrl-V" to paste.  I used paste the image to the Clipboard as stamp - and sometimes it works and sometimes it isn't.  I have not been able to find a consistency in when it neither does not let me resize.  Thank you!

  Resolution: Do not cross the Clipboard. This path does not support maintain them quality image files.

  You have a beautiful image that you like. Insert it into a Word file empty.
  Size and configure as desired by using the tools that Word provides. Record.
  Create a PDF file. With the help of Acrobat create a stamp that uses this PDF file. Record.

  Be well...

• Resize the image sources - change the size of the images database

  Hi all

  I have a trivial problem, but I can't deal with it. I have a project with compositions called slides. Each slide have JPG image as layer and this image is assigned 100% to 106% Resize effect (two keyframes). The images have their own folder. I need to replace all the images but the problem is that the new images have different sizes, for the most part, they are bigger than originals. When I right-click the imported images directly on I don't see any options to change their size (single space reserved or solid). When I double click them to open it in a new tab I don't see no resizing tool and layer menu is grayed out for the most part.

  So far, I found that I have three possibilities:

  1. resize as a layer in the composition of each slider. Unfortuately I don't see any way to change the database size, so resize here means add another keyframe or change existing. If I change the first keyframe on the layer in the composition of the slide then I have to proportionally resize the last of them. There are about 20 slides this process would be quite painful

  2. resize the images before importing - with PSP, GIMP or same IrfanView. It would be a much better solution than before however, this means a blind resizing - without no preview as the composition. Whenever I want to change the size a bit, I have to import image again. Painful.

  3 convert the images to the compositions,

  Convert each JPG file in composition, put this composition as the layer to each composition drag next to layer JPG, transformation of copy of layer of JPG to the composition of the image layer and delete the JPG layer. Long process but the effect is exaclty as I want and the project is fairly durable for any other modification of the image. However, in larger projects where there are many effects assigned to layers, it would be very painful.

  So is there an easy way to change the sizes of the imported images database? I can't believe that in such a huge program like After Effects, there is no way for such a simple task. I believe firmly im just something missing.

  You can resize your layers in Ae with scale parameter. (transform-> scale). If there is no animation, you need not place a keyframe. for example, you can resize your layer to 46% and decide to evolve for a while, so the first keyframe will be 46%, and the last keyframe is 83%.

  Yes, I know that if you have layer with no keyframes for the scale property then scaling ways to change the size of its base. However, in my example, I have two frames - 100% and 106%. If I import large image so I have to resize. If im on the first keyframe, and then it wil change its size to 100% for example, 56%. But the last keyframe is not changed - its still 106%. So that means animation past from 56% to 106% - image develops much more quickly than in an original animation.

  But now I found that I can select all the points of the keyframe by clicking on the entire property scale and resize proportionally when I resize the image, all the points of the keyframe. It's the simplest and most effective solution for me!

  Thanks for the help!

• Cannot install VMware ESXi 4.1 "cannot find the image of the installed system.

  Started in iso ESXi 4.1 downloaded, burned on a CD, CD, go to the screens, press F11 to install.  Immediately get the following error:

  -

  ---

  The installation operation failed!

  The installation operation encountered a fatal error:

  Cannot find the image of the installed system.  This is due to the image being not mounted correctly or the CD-ROM not supported.

  -

  ---

  The material is a system of handcrafted with Intel DQ35JO Council, latest version of the BIOS, Intel E6850 CPU, 8 GB of RAM, 2 SATA drives.  I know this isn't on the list compatible but is a 'white box '.  I installed ESXi 3.5 on it in the past and got it working, and I saw other success stories with this Board/CPU.  Yes, I have activated the virtualization mode in the BIOS and powered down/up.

  Here is what I tried:

  -Redownload VMware-VMvisor-Installer - 4.1.0 - 260247.x86_64.iso to ensure that it was not corrupt (2 copies, against perfectly)

  --Also tried another drive (IDE) CDROM

  -Created a bootable USB using uNetBootin 4.7.1 and booted from it

  -Switched SATA setting in the BIOS from AHCI to IDE

  I get the same exact error.  I searched here and everywhere and don't find any reference to this error.

  Help - all do you offer for my next step?

  Have you had a previous vSphere installed on your system?

  I had the same error on my 'white box' (in fact, it is black).  I used to run esxi 4.0 (u2) on my Acer X 3300 (6 GB, Quad Core AMD Athlon II).  Controllor internal SATA is not supported, but it allows me to use the box for normal windows task and ESXi is sitting on a SDHC 4 GB flash card.

  When I started my freshly burned ESX4.1 cdrom, I got the same error.   I thought that the fact that maybe there was an existing install on my destination drive (the flash memory card), and that the CD could not perform an upgrade.

  So, I tried the upgrade path (first trying to utility of the host and the .xml error message).  After reading the manual, I did the upgrade from 4.0 to 4.1 using the device of vMA and I must say that esxi 4.1 works great on my white box.

  Then I suggest that you try upgrading and see how far that gets you.

  Good luck (and a beautiful weekend)

  Marino

• Get the old value of font size of the text after resizing the image.

  Hi all

  I write the script to get the size of the font of the text layer. I'm old font size after resizing the image.

  Here are the steps:

  -I write the function to get the property of the selected text layer...

  getInfoOfText = function (textLayer)

  {

  ........;

  var textItem = textLayer.textItem;

  fontSize var = textItem.size;

  .........;

  }

  -After image resize 50%. I am executing this function.

  But I get always the old value of font size.

  Let's say that the size of the font of the text = 36 px.

  Now I apply Image resize 50%. Thus, the size of the font of the text becomes 18 px.

  Now, if I run the 'getInfoOfText' function, I get always 36 px.

  I can't understand the behavior. Am I missing something here? Is it possible to get the correct font size value?

  Please note that I use the CS6 version.

  Waiting for your help guys.

  Thank you

  It seems that there is a BUG in CS6 and CC with transformed text, here is a function of http://www.ps-bridge-scripts.talktalk.net/

  function getFontSize(){
  if(app.version.match(/^\d+/) < 13) return activeDocument.activeLayer.textItem.size;
  var ref = new ActionReference();
  ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
  var desc = executeActionGet(ref).getObjectValue(stringIDToTypeID('textKey'));
  var textSize =  desc.getList(stringIDToTypeID('textStyleRange')).getObjectValue(0).getObjectValue(stringIDToTypeID('textStyle')).getDouble (stringIDToTypeID('size'));
  if (desc.hasKey(stringIDToTypeID('transform'))) {
              var mFactor = desc.getObjectValue(stringIDToTypeID('transform')).getUnitDoubleValue (stringIDToTypeID('yy') );
      textSize = (textSize* mFactor).toFixed(2).toString().replace(/0+$/g,'').replace(/\.$/,'');
      }
  return textSize;
  };
  

• Firefox cannot resize the files of gmail download dialog

  When you use Gmail and I click on the attachment link to see the file download dialog box, it is always displayed full screen and I cannot resize. the small < < thing in the lower right corner does nothing and there is no resizing does not control in the upper right where X is. execution of Gmail using Chrome does not exhibit this problem. I recently did a Firefox "refresh" and it has not changed this behavior. It is a new problem that must be linked to a recent change somewhere that I saw this problem over the years of a prior use of Firefox and Gmail. He just did the same thing when you click Browse on this Mozilla support page - is not a specific problem of Gmail.

  Can you open the system menu via Alt + space and use Restore or resize?

• How to resize the image

  Hi all

  IAM getting the image to the server I need to resize the images, iam specifying an area it should resize and display with out streatch the image; as in a browser if I reduce the size of the browser, then the size of the image decreases as the correspondent. What should I do for this in the mobile? for this whole method in blackbery?

  Thanks in advance.

  Hi all

  I solved the problem.

• Cannot create the Image of the system or system, unknown error repair disc: 0x80004005.

  Original title: cannot create the Image of the system or system repair disc

  I just bought a new Windows 7 computer. I tried to create a system repair disc, but still receive the error msg - error (0x80004005) unspecified. I tried - and lost - several DVDs in the process. Also, not able to create a System Image disc. The computer says that I have to format the drive and when I click OK, it goes through the movement, then gives me an error msg that the Format has failed. (In addition, it does me not the possibility not to format the drive.)  Very frustrating...

  Hi iamkira,

  This problem can be caused by a conflict with other programs installed on your computer, usually antivirus software. Follow the steps described in this document to create the drive in a clean boot state.

  Let us know if that helps.

• Need an easy way to resize the image for the web program

  I used to use Picture manager to easily resize a large picture (1-2 MB) to use on the web (50-100 KB) program. Now upgraded to Windows 8 (Why oh why, it is so user unfriendly) and photo gallery only resizes the images to about 500 KB. How can I easily resize images effectively.

  I used to use Picture manager to easily resize a large picture (1-2 MB) to use on the web (50-100 KB) program. Now upgraded to Windows 8 (Why oh why, it is so user unfriendly) and photo gallery only resizes the images to about 500 KB. How can I easily resize images effectively.

  ======================================
  Perhaps the resizer freeware at the following image
  be worth a try.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Prish Image Resizer
  http://www.photo-freeware.NET/Prish-image-resizer.php
  (Operating system: Windows XP / Vista / 7 / 8)
  (the name of the 32-bit file is: 32bit_PrishResizer_2519.msi)
  (for 64 - bit file name is: 64bit_PrishResizer_2519.msi)

  (Note... the download links for 32-bit and 64-bit are reversed)

• I have some pretty high resolution still panoramas I want to move from left to right, but when I resize the image to fit the image, the resolution drops to an unacceptable level. Is this possible? John

  I have some pretty high resolution still panoramas I want to move from left to right, but when I resize the image to fit the image, the resolution drops to an unacceptable level. Is this possible? John

  Make sure that before you add this photo to your project, you go to the preferences (under the Edit on a PC) and uncheck the default scale to the size of the image.

  Scaling of artificially reduced image size your photo - no matter how large - the size of your video image, make detailed pans and zooms like your impossible. When it is not checked, your photo will be in full resolution and you will only see a small part of it in the preview window.

  That said, don't forget that you work at video resolution, so some details will be lost. (Less so, if you change video high-def). And, of course, don't forget to make your timeline after you have added your pans and zooms to see a better representation of what your final video will look like.

• need to resize the image to a larger size and without distorting

  need to resize the image to a larger size and without distorting

  Every time you a high-end image you sacrifice quality and introduce artifacts.

• resize the image in a div with css

  Hi I have a slideshow and I load image dynamically with this code when I click on the thumb

  ($(sym.lookupSelector ("image1container")) .css ("background-image', ' url(images/ALBUM_01/album1_1.jpg)');

  All good, but what an opportunity of css, I use to Center and resize the image in a div to 100% height and 100% width of the div?

  It's my solution and it function

  I have attached the external stylesheet in compositionReady;

  $("_ _").appendTo ("#Stage");

  myStyle. CSS is subsequently

  @charset "utf-8";

  / * CSS document * /.

  HTML, body, #container {}

  height: 100%;

  Width: 100%;

  }

  IMG {}

  Max-width: 100%;

  height: auto;

  Width: auto\9; / * ie8 * /.

  }

  div {}

  background-repeat: repeat no.;

  background-size: 100% 100%;

  }

  on the edge of adobe in the rectangle that contains the image I put in class 'div '.