Cannot restore my L750-170 Satellite to factory settings

Similar Questions

• Computer was accidentally arrested during a complete restoration of the system to the factory settings. Help!

  OK, so I did a complete system restore to my netbook in its factory settings. Everything went well until I'm gone, and I find that the computer has been stopped during the restoration of the system. I turned it on and it loads and then displays the screen that says

  "Setup prepares your computer frst use."

  but after about 2 seconds this screen a pop up comes and says:

  "The computer shut down unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click OK to restart the computer, n then restart the installation. »

  Well I click OK and I have let it restart but then he did the same EXACT thing each time only. Please help me find a soloution because I can't my school without her wok!

  Start the full system restore process to repair what has been damaged
  on the first attempt.
   
  "hillcon2" wrote in message
  News: * e-mail address is removed from the privacy... *
  OK, so I did a complete system restore to my netbook in its plant
  Parameters. Everything went well until I left and I find the computer
  has been closed during the restoration of the system. I turned it on and it loads up and
  then displays the screen that says
  "Setup prepares your computer frst use."
  but after about 2 seconds this screen a pop up comes and says:
  "The computer shut down unexpectedly or encountered an unexpected error." Windows
  installation cannot continue. To install Windows, click OK to restart the
  computer, n then restart the installation. »
  Well I click OK and I have let it restart but then he did EXACTLY the same thing
  every time. Please help me find a soloution because I just can't get with my
  wok to school without her!
   
   

• How to do a restore of my acer laptop to factory settings

  Any1 can tell me how 2 Restore my acer aspire laptop 2 factory settings

  Without a specific model number or what operating system delivered to the unit, I can direct you to our base of knowledge and a few items that we have available that deals directly with this topic.

  How can I restore my computer by using ALT + F10?

  How can I restore my computer using eRecovery Management?

  In addition, this is a comprehesive list most of the topics on creating and using the recovery media that can help: Use Acer Recovery Management to restore your system or create recovery media

• restored my Dell computer to its factory settings, but my backup files will not restore

  original title: restoration of PC for windows XP

  Used "files and Settings Transfer wizzard" to restore my Dell computer to its factory settings.

  I saved my files to an external hard drive.

  Restoring to factory settings worked fine however not recover my files backed up.

  A message is displayed (the location you specified contains no stored information)

  I can see the USMT2 file. UNC on my external hard drive and it's big enough.

  Need help to restore my files.

  Hi GeorgeGould,

  If it helps, try the step below and check out them.

  (a) access to the following location: C:\WINDOWS\system32 and copy the USMT folder (and all what it) to the location you saved the USMT2. The UNC file.

  (b) now when you run the files and the Transfer Wizard from the settings of the computer that you want to transfer the data, navigate to the location of USMT folder you saved above and click on ""migwiz " and that should start normal files and the wizard to transfer settings from this location."

  Note: Be sure to point to the location to the root, for example, if you save your data at X:\nelson\USMT2. UNC, then point the location to X:\NOT to X:\nelson\USMT2. UNC. The wizard should find the data automatically.

  You should now be able to successfully complete the transfer process.

  Additional reference on:

  Files and settings are not transferred when you use the files and the Settings Transfer Wizard 

• How do I restore my windows 7 to its factory settings? as a new installation!

  How do I restore my windows 7 to its factory settings? as a new installation!

  If you have bought and installed Windows 7 yourself, see the following resources:

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  If it is preinstalled on your computer.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is available for the most popular brands

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Samsung: Press the F4 key to the Samsung logo when you turn first.

  For Asus, press F9, as soon as you see the Asus logo.

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

• Cannot restore the portable computer Satellite Windows 8.1

  I have recently acquired some malware on my laptop, and after several failed attempts to remove it have decided to try to restore the device to factory settings.

  Unfortunately, I don't create backup media when the laptop was new and the recovery media creator appears only to create a cover for the system as it is.

  I tried to update the laptop using recovery tools built-in, but got an error "the drive where windows is installed is locked. Unlock the drive and try again."

  Then I tried a reset and got "failed to reset your PC. A required partition is missing. »

  I have created no recovery media when the laptop was purchased, do not not this.

  I don't have a system image 'clean' for a system image recovery.

  I do not have a restore point created earlier for a restoration of the system.

  Auto repair seems to only deal with problems of boot of the system, but still had an error "auto repair could not fix your computer" as I was trying anything at this point.

  Please can anyone offer any advise of any other route that I could take to restore factory settings.

  Thank you

  EH... it is a quite complicated situation now. Problem is that there is not a special workaround solution and you can not force installation of recovery image. Either it works or not.
  It is a pity that you don't l l create recovery media. It is the first step that everyone should do after the purchase of the laptop. This recovery media can be used in complicated situations.
  > Unable to reset your PC. A required partition is missing
  For some reason tool recovery doesn't have access to the recovery or recorded data recovery partition.

  What can you do now? To be honest, I see only one solution: order the new original recovery media for your laptop model. It can be done on https://backupmedia.toshiba.eu/landing.aspx

• Cannot retrieve the Satellite to factory settings after installing Win XP

  I was running windows recovery then I chose 'delete all data... '. "something like that.
  Then in the Middle by mistake I turned off the system.

  After that, I tried to start windows so was in error "missing operating system". I managed to install WINDOWS XP, so I could access HDD RECOVERY but nothing happened.

  I tried pressing the "F8" key and also the '0' key when the computer starts to "toshiba" logo but it is still not send me any option to get my computer back to windows vista or you can say "out of the box.

  One important thing is, while installing windows XP its show me this HARD drive recovery exist and 973 MB is free off 5665 MB. This means that I have still all windows and the drivers on the HARD drive. Now please help to return normal system recovery or BOX STATE.

  > After I tried to start windows so was in error "missing operating system". I managed to install WINDOWS XP, so I could access HDD RECOVERY but nothing happened.

  The installation of Win XP has damage and remove the Boot Manager and options preinstalled by Toshiba and backed by Toshiba picture.

  This means that if you will be unable to retrieve the device using the drive HARD recovery option.

  You could retrieve the device back to factory settings using only the Toshiba recovery disc! But I guess that you didn't create this disk is good?

  Well, in this case, you can order this disc from here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Re: Satellite C650D - factory settings and drive recovery different?

  HI - have had problems with the Satellite C650D model for a few months - very slow, a lot of viruses, constantly crashing, updates constant, constant "cannot connect windows" and "windows try to repair your system" problems. I have reinstalled factory for the laptop several times, but the problems keep occurring - should I buy a recovery disc - is - it different for recovery system installed? Thank you

  > I have reinstalled factory for the laptop several times, but the problems keep occurring - should I buy a recovery disk > - is - it different for recovery system installed?
  Recovery DVDs contains the same recovery image as image stored on the HARD drive, so there is no difference.

  To be honest I don t understand what may be the problem.
  Can you please tell us what you did exactly (reinstalled factory settings)? I mean how did you do that?

• Cannot depend on wifi after returning to factory settings

  I have a dell Inspiron 11-3000 series 3137 - I restored it to factory settings its all turned on and everything seems to work except that I cannot turn on wifi.

  When I go to settings I can turn airplane mode and the but the wifi and Bluetooth are not underlined, where you can do something with it - can someone help me on this?   Thank you

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• What happens when I restore my El Capitan mac to factory settings?

  I currently have El Capitan and wanted to reinstall my Windows partition because I needed more space, but after deleting the partition and to set up the new partitions, I came across some problems during the installation of windows, in which he said that the drive was GPT partition or something like that. I've lost 3 days trying different solutions in various sites, including this and have yet to make it work so I decided to just restore my Mac for its original OS and reinstall my Windows then just upgrade to El Capitan again.

  My questions are:

  1. it would be the first time that I do this, but from what I've read and watched, what are the exact steps to restore my mac to its factory settings?

  a. restart the Mac.

  b. hold the cmd + r

  c. Select utility disk under the window utility for OS X

  d. Select the partition (Macintosh HD)

  e. clear it for OS X (journaled)

  f. utility disc close

  g. click on reinstall OS X under OS X utility window

  h. click on continue

  i. choose my drive

  j. click on install

  2. what would be the OS X installed on my newly formatted partition? Would it still El Capitan (my current operating system before formatting) or Mountain Lion (the operating system original on my Air mid-2013)?

  recovery of the Internet will reinstall the last interaction of the operating system that was available

  the air of 2013 came with 10.8.4 when he left, internet recovery restore 10.8.5

  No, you do not have an option to choose something else.

• How to restore Equium P200 1IR back to factory settings?

  Please, I would like to know how to restore my computer toshiba laptop Equium P200 1IR back to factory settings? Because he's been to slow down.

  Thank you

  Verb

  Hello

  You need the recovery disc!
  The recovery disc you will format the whole HARD drive and install the image of Toshiba on the HARD drive.
  Toshiba image contains the operating system Windows, drivers Toshiba and other tools and utilities.
  You need boot from the recovery disc and should follow the instructions on the screen

  All that s

  PS: read other discussions here in the forum and learn...

• Presario CQ57-433SI: I restored my Presario CQ57 to its factory settings n

  I restored my laptop to factory settings, now it won't start. His application Windows 7 must be installed. When I bought the laptop, it had already installed windows.
  Its telling me to contact my service administrator
  Name of the file: \Boot\BCD
  Status: Oxcoooooof
  Info: an error occurred trying to read data from startup configaration.

  Troubled3 wrote:
  I restored my laptop to factory settings, now it won't start. His application Windows 7 must be installed. When I bought the laptop, it had already installed windows.
  Its telling me to contact my service administrator
  Name of the file: \Boot\BCD
  Status: Oxcoooooof
  Info: an error occurred trying to read data from startup configaration.

  Sounds like a bad hard drive...

• Restore my HP Pavilion laptop to factory settings it is a good idea?

  I recently accidentally changed my default settings of the police, I did everything I could, except for the restoration of my hard drive to its default settings. However, since I bought this computer a year ago, I noticed faster internet and less connection issues, as well as some other problems fixed. I'd be willing to sacrifice my default settings for performance, so I was wondering if it would be a good idea to restore my computer to its default settings. Also, I currently do not have records to back up my data, so I'll need to do the same. Another thing, my HP Advisor advised me not to restore my laptop unless I really need to.
  Yet one thing, lightning struck our House a few months ago. Unfortunately, I accidentally turned off my father the day before surge protector. Anyway, he destroyed all of our equipment to wireless internet, as well as the fan of my father. We then contacted AT & T and they sent us a few tricks, with phone, download order software online to make our internet work. I do not have these registered Web sites and I don't know how in the world I would like to reinstall that software. So, I was wondering if I drop everything this software if I did a factory restore.
  Thank you for your time and support, rlnachtigal

  I'm with your HP consultant. Restoring default values should be a last
  Resort. If you need assistance resetting your fonts, start another thread for
  which. I'm sure you will find the repair of fonts one relatively simple
  task, compared to the restoration of your PC.
   
  "lnachtigal" wrote in message news: ec23156a-a398-40da-9465-20dd2c358d08...
  > I recently accidentally changed my default settings of the police, I did everything what I
  > could, except for the restoration of my hard drive to its default settings.
  > However, as I bought this computer a year ago, I noticed
  > faster internet and connection issues, as well as other less
  > issues fixed. I'd be willing to sacrifice my defaults
  > performance, so I was wondering if it would be a good idea to restore my
  > computer to its default settings. Also, I currently do not have the disks to
  > save my data, so I'll need to do the same. Another thing, my
  > HP Advisor advised me not to restore my laptop unless I really need to.
  > One last thing, lightning struck our House a few months ago.
  > Unfortunately, I accidentally turned off my father surge protector the
  > night before. Anyway, it destroyed all our wireless internet,
  > fan of my father. We then contacted AT & T and they sent us a few
  > Stuff, along with order of phone, download software online
  > to our internet job. I do not have these registered Web sites and I don't have
  > know how in the world I would like to reinstall that software. So, I was wondering
  > if I drop everything this software if I did a factory restore.
  > Thank you for your time and support, of rlnachtigal
  >
   
   

• Restore the C50A Satellite to factory settings

  Tried to reset the computer but screen everything shuts off and does nothing.
  Any ideas pls

  Have you installed original recovery using recovery media created image?
  Installation of recovery is completed correctly?

• How can I restore a Acer Aspire One to factory settings?

  My acer aspire one netbook is overloaded with files, and lack of files that are action on a key to normal, Im not sure but I think I can miss the option file/necessary to reset to the factory...

  Hello

  I suggest you to refer to this link and check if he's dreaming:

  http://support.Acer.com/acerpanam/desktop/0000/Acer/aspiree360/aspiree360faq40.shtml

  Check if that helps.