Cannot restore to a restore point from the previous month.

Similar Questions

• Cannot restore files from the point has up on toshiba vista 32

  I backed up my files on DVD. I did a complete reinstall of the computer. Now when I try to restore files from the backup of the file. It won't allow me. I tried to restore, in ways that shows on my computer. I managed on the base to get the files on my computer, but not the files.
  Help, please

  Hello h20sdavid ·         Are you able to browse the files that are created in the backup? ·         Requires external drive that you are installing the software and/or before pilots to use and you have installed them after reinstalling Vista? ·         What is the error message you get when you try to restore the backup? You can try to change the drive letter for your external hard drive and check if you are able to restore the backup. 1. open computer management by clicking the Start button, click on the Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click computer management.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation. 2. in the Navigation pane, click Disk Management. 3. right click on the partition or drive that you want to change and then click on change drive letter and paths. 4. to change a drive letter, click on edit, click on assign the following drive letter, click the letter you want to use and then click OK. Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Can you set a restore point from the system on a disk?

  Can you put a "System Restore" point on a disc? a disc re writable DVD, for example.

  To make it clearer:

  I want to do a restore point for my "C:" drive, but I want it on an external drive as a drive re writable DVD that can be put in the drive "D:" or, Alternatively, a flash drive.

  Is this possible?

  Any help is appreciated thanks :)

  A restore of the system (System Volume Information) file must be on the disk/partition that it protects. Each drive/partition will have its own System Volume Information folder for the recovery of the partition/drive specific. It's the way is designed the o/s, so not impossible to return c to another drive.

  Sorry, but that's the way it works and cannot be changed.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to get a bill from the previous month in the history of the order?

  Hi all

  I need to have the Bill for the creative cloud may 2015, I can't find this Bill more. In the history of orders, I only see last month's Bill, June 2015. Does anyone know how to get invoices for previous months in the creative cloud Portal?

  Thank you much in advance.

  Fajar

  Fajar all invoices are available in your Adobe account.

  But in the case where you are unable to find, please contact customer service.

• System Restore cannot create restore, point because the "shadow copy provider had an unexpected error." What can I do?

  Have a Dell Inspiron 1545 with Vista.  System Restore cannot create restore, point because the "shadow copy provider had an unexpected error."   What can I do?

  Hi JamesParwulski,

  Method 1
  I suggest you to scan SFC.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7.
  http://support.Microsoft.com/kb/929833

  Method 2
  I suggest you perform a checkdisk.

  Check your hard drive for errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

• Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."

  Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."  How can this be repaired?

  Hi rebick,.

  Try the troubleshooting steps presented by spirit X in this thread.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• You just edit Contacts in GMAIL and I can not restore my contacts from the previous version. I followed your instructions, but it has not restored nearly 500

  You just edit Contacts in GMAIL and I can not restore my contacts from the previous version. I followed your instructions, but it has not restored nearly 500 contacts that I have that are in other contacts.

  Hi robertsjohn125,
  Contacts are not supported in Firefox, unless you take on Firefox Desktop and Hello of Firefox?

  Where to manage your contacts, this might help to direct you to the correct support.

• I just bought a new air of IPad.  It came with IOS 9.1 and I can't restore it from the cloud until I have upgrade to 9.2.1 How can I do this since I can't access my settings?

  I just bought a new air of IPad.  It came with IOS 9.1 and I can't restore it from the cloud until I have upgrade to 9.2.1 How can I do this since I can't access my settings until the IPad is set up?

  Set up as a new device, the Update 9.2.1 the restore to original settings and then load the backup.

  (139893)

• How to create a restore point in the protection of the system in safe mode?

  As topic the question, how to create a restore point in the protection of the system in safe mode?

  Hello

  read a tutorial on the below link for everything you need to know about the system restore

  http://www.bleepingcomputer.com/tutorials/tutorial143.html

  and read this too

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

• How to restore restore points which, I have it in drive D:. I chose to have the restore points in the D: drive.

  I've failed to restore points to be stored in the D: drive.
  I did computer-> properties-> system protection.

  and now I can't access restore points and the last restore point that was created was only 3 hours back.
  Please help me. I need. My dvd writer does not work I have to restore it.
  Help, please.

  Thank you

  Harsha

  You have not enabled to 'keep' on the D: drive restore points, what you have done is told the system to "monitor" the D: drive restore and create system restore points "of" drive D: John Barnett MVP: Associate Expert Windows XP: Windows Desktop Experience: Web: http://www.winuser.co.uk;. Web: http://xphelpandsupport.mvps.org; Web: http://vistasupport.mvps.org;

• Access is denied when I try to restore files from the Recycle Bin

  Original title: error

  My husband accidentally sent his files to the trash, Einstein he is. When I click on restore everything, I get a code error that reads "C:\ProgramData\Microsoft\Windows\WER\ReportQueue\report0955479c\is is not accessible. Access is denied. "Help!

  Terristreasures

  Hello

  ·         What is the location of the files that have been deleted?

  ·         Have you logged as administrator?

  ·         You try to restore the Recycle Bin of your husband or your account account?

  ·         You can access the location of the file mentioned in the error? (C:\ProgramData\Microsoft\Windows\WER\ReportQueue)

  To view the location of the file error try to enable hidden files.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Show-hidden-files

  Follow these methods and check if that helps:

  Method 1:

  I suggest you to manually restore the file from the Recycle Bin and check.

  (a) on the desktop, double-click Recycle Bin.

  (b) to restore a file, right-click and then click on restore.

  http://Windows.Microsoft.com/en-us/Windows-Vista/recover-files-from-the-Recycle-Bin

  Method 2:

  Also I suggest that you start in safe mode and check if you can restore files from the Recycle Bin.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-safe-mode

   

  Method 3:

  If you are not able to access these files try ownership of the folder and check if you can restore the files.

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

• I looked under system restore points and the earlier it had was on March 27, which was still after that I got problems

  Good so my computer has some corrupted files... I looked under the system (Yes, including the section 5 days ago) restore points, and the earlier it had was on March 27, which was still after that I got problems... I want a later date... Help, please.

  Hello

  If there is no previous restore points until 27 March, including even more that 5 days more then they just do not exist

  and you can not do something which

  Follow these steps instead:

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Receive the message error "Windows Media Player cannot extract one or more tracks from the CD"

  Original title: Windows Media Player 12 in Windows 8 - will not tear, will not allow rip parameter changes

  Recently started Windows Media Player displays this error message when I tried to rip CDs: "Windows Media Player cannot extract one or more tracks from the CD." When I checked the rip settings, I found that no location has been chosen, even if I had chosen a location when I first set up WMP over a year ago. When I clicked on the "Change location" button, nothing happened, so I'm not able to choose a file location. I downloaded and Fix It (http://support.microsoft.com/mats/windows-media-player-diagnostic-Windows-8/en-us) from Microsoft allows WMP and the library, hoping this would solve the problem, but the problem persists. After that, I also found that none of the rip settings can be changed, not only the location of the file. I get an error message that "ripping settings could not be applied" when I try to change anything on the tab music Rip under Options. I found a support of forum responses that mention a registry fix but does not provide any details on how to achieve this. Any ideas would be greatly appreciated.

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Ripping allows you to put the titles of your audio CD on your PC. When you rip the tracks, they become digital files on your PC.

  There are two places in the Player library where you can customize your settings and better to make ripping work:

  • In the Rip settings menu (with less choice customization).

  • In the Options dialog box (with several choices of customization).

  Method 1: run the tool library, Windows Media Player and Windows Media Player settings and check if the extraction is possible.

  Step 1:

  a: press the logo Windows + O to open the search box.
  b: Type Troubleshooting, press ENTER.

  c: now, click on programs.

  d: and then click Windows Media Player  library.

  Step 2:

  a: press the logo Windows + O to open the search box.
  b: Type Troubleshooting, press ENTER.

  c: now, click on programs.

  d: and then click Windows Media settings.

  Method 2: Perform the steps from the link below and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows-8/change-settings-for-ripping-music

  Answer please if you have any questions.

• How can I recover my favorites from the previous version of Firefox?

  I just loaded the new version of Firefox. My Favorites from the previous version have disappeared. How can I get back them? I went through the provided recovery method, nothing.

  Do you still have backups of bookmark in the bookmarkbackups folder?

  • Bookmarks > show all bookmarks > import and backup > restore
  • https://support.Mozilla.org/KB/restore-bookmarks-from-backup-or-move-them

  You have an "Old data Firefox" folder on the desktop in the case where you have refreshed Firefox and created a new profile?

  • https://support.Mozilla.org/KB/reset-Firefox-easily-fix-most-problems

  You can retrieve the form of the data of the 'Old Firefox Data' folder, but be careful.

  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile

  You can copy files like these in your current Firefox profile folder.

  • bookmarks/history: backups in the bookmarkbackups folder and perhaps places.sqlite, if you really need the history
  • other SQLite files cookies.sqlite (cookies) and formhistory.sqlite (saved form data)
  • logins. JSON and signons3.txt (decryption key) of the saved passwords in password manager
  • Permissions.SQLite and, possibly, content - prefs.sqlite permissions and Site preferences
  • cert8. DB for stored intermediate certificates (Certificate Manager)
  • sessionstore.js to open and pinned tabs and tab groups
  • Persdict.dat for the words that you added to the spelling dictionary

  Note that "Reset/Refresh" creates a new default profile with a time stamp to identify it and trying to retrieve settings such as Favorites and history and history and cookies and passwords, data of automatic filling of the old profile, but you lose data such as the installed extensions and other customizations.
  The current profile folder will be moved to the "Old Firefox Data" folder on the desktop.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Why Firefox doesn't save my tabs from the previous session although I chose to do it in the options?

  Firefox does not save my tabs from the previous session, although I have chosen in options, to save my tabs from the previous session.

  Firefox 4 saves the previous session automatically, so it is no longer necessary for the dialog box asking if you want to save the current session.
  
  Use ' file > exit ' or ' Firefox > output "If you want to restore multiple windows.
  
  You can use "Firefox > history > restore previous Session ' to get the previous session at any time.
  
  There is also a button 'Restore previous Session' on the default on: Home home page.

  Another possibility is to use:

  • Firefox/tools > Options > General > startup: "When Firefox starts": "show my windows and tabs from last time '.

  Make sure that you do not remove the navigation, search and download history on Firefox to clear the browsing history when you close Firefox.

  • How can I restore my tabs from last time?