CANNOT RETRIEVE OR FIND FILES BACKUP REPORTEDLY MADE BEFORE FAILURE OF VISTA.

Similar Questions

• ORA-01124: cannot retrieve the data file 1 - file is in use or recovery

  I'm trying to recover the database in waiting, but it gives the error below.
  
  ORA-00283: cool cancelled due to errors
  ORA-01124: cannot retrieve the data file 1 - file is in use or recovery, the recovery is already said
  ORA-01110: data file 1: ' I:\ORACLE\QAS\SAPDATA1\SYSTEM_1\SYSTEM. DATA1'
  
  When I checked in the alert log recovery is not started. and later I hae given ' alter database recover Cancel "and the command to meet with the threshold.
  
  "media recovery has not started.
  
  It seems that the recovery was stuck between the two.
  Please advise me how to kill the recovery session that is stuck. because I don't want to bounce the database pending.
  
  Thanks in advance.

  Dataguard and MRP, you run a script before.

  In a standby scripted, a session to RETRIEVE the DATABASE would an UNTIL clause (SEQUENCE up to THAT most likely). At the end of the recovery at this point (SEQUENCE #), he left and stop at the database.

  In addition, the script is such that when a RECOVERY session is active, another session is not authorized to start. It can loop in pending state or go out and do it again the next scheduled interval.

  Apparently your startup script is not strong enough to prevent another session of RECOVERY to start even though the first is active (or it doesn't have a good up to THAT clause and stop, exit, closing stocks)

  What you have is a custom implementation of a database of pending. Without all the details of the script, the 'blocking' between sessions (to avoid a second RECOVER start when one is already running) etc... We can't really do much to help you.
  Your scripts must be standing with status information. It should be possible for you to discover the 'other' sqlplus session which emanates a DATABASE to RECOVER, but not yet out (p. ex... How about a simple "ps - ef |") grep sql' and ' ps - ef | combination of grep ora"?)

  Hemant K Collette

  Published by: Hemant K Collette on May 29, 2013 17:47

• Cannot retrieve downloaded VeohWebPlayerSetup file with Unarchiver... How can I fix this problem?

  Hi all.

  To download my videos on Veoh, I had downloaded their web player for Mac. But Unarchiver declares that it cannot extract this program. Opening of the finger on the button control too gives no results. What should I do?

  Thanks in advance.

  Dr. Christophe

  If you mean Veoh 3.0 there is nothing to extract. It comes as a .dmg file. DBL-click on the file and run the package.

  Unless of course you have downloaded version .exe Windows that will not be installed at all.

• Cannot retrieve table of rman backup

  For the test, I want to recover the deleted table of rman backup.

  I do oracle 11g VM.  the next step, I've applied but could not recover the table.

  RMAN > backup database;

  On sqlplus create connect scott/Tiger

  create table scott.emp1 (col1 varchar2 (10));

  Insert into the value emp1 (col1) ('Young');

  commit;

  Select * from emp1.

  He shows me a single line successfully.

  Now, I have connection to the sys as sysdba

  sqlplus > alter system switch logfile;

  After I remove the table.

  Now to retrieve the table I restored the database on the same virtual machine.

  RMAN > restore database;

  RMAN > restore database;

  RMAN > alter database open;

  sqlplus I've issued

  sqlplus > select * from scott.emp1;

  table or view does not exist.

  any help how to recover the deleted table of rman backup

  Hello

  Check this test scenario

  SQL > create table TEST2 in select * from emp;

  Table created.

  SQL > select count (*) from TEST2;

  COUNT (*)

  ----------

  15

  SQL > select TO_CHAR (SYSDATE, "MON-DD-YYYY HH24:MI:SS) twice;

  TO_CHAR (SYSDATE,'DD-)

  --------------------

  2013-SEPT-10 10:57:05

  SQL > alter system switch logfile;

  Modified system.

  SQL > drop table TEST2 is serving;

  Deleted table.

  SQL > immediate shu

  rman target $ [oracle@vnode MYSHELL].

  Recovery Manager: release 11.2.0.2.0 - Production kills Sep 10 10:58:39 2013

  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

  connected to target database: DDTEST (DBID = 1667776968, is not open)

  RMAN > run {}

  until ' to_date (' 10 10:57 ',' yyyy Sep 2013 my dd HH24 ') ";

  restore the database;

  recover the database;

  ALTER database open resetlogs;

  } 2 > 3 > 4 > 5 > 6 >

  ...........

  ...........

  media recovery complete, duration: 00:00:02

  Finished recover 13 / SEP / 10

  open database

  RMAN > exit

  SQL > define pages of lin 200 100

  SQL > select count (*) from test2;

  COUNT (*)

  ----------

  15

  HTH

• I have a new iMac and I want to make a backup of my iPhone, I lost my dates of the will? because in this computer I have no backup I made before

  Hello

  I bought an air iMac, and now I would like to make a backup of my iPhone on this computer.

  but the question is, if I do not have the backup that I did before, it is possible that I lost my dates?

  because the computer I had entered is not an iMac.

  Thank you

  Francesca

  Hello Francesca Montani,.

  Thank you for using communities of Apple Support.

  Congratulations on your new iMac! I understand from your message that you want to create a backfile to your iPhone 5 c, but are afraid of losing the data on it. I know how it is important for you to keep your data on your iPhone 5 c and to create a backup file for it.

  When you plug your iPhone 5 c in your new iMac, iTunes should open. Your iPhone 5 c should also receive a message asking if you trust the computer. Go ahead and trust of the computer.

  iTunes should display a page that says: Welcome to iTunes and you give 2 options. You want to choose the option to play up like new. Don't worry, it will not erase anything from your iPhone. The next page, you should see if the page summary of the iPhone. You should see a picture of an iPhone and a description.

  In the middle of the right side, you should see a section called manually backup and restore. To create a backup file, select Back Up Now. This article has steps and a picture to help you create an iTunes up. I have also highlighted the steps below:

  The backup of your iPhone, iPad and iPod touch

  iTunes

  1. Open iTunes and connect your device to your computer.
  2. If a message asks you to Trust This Computer or device password, follow the steps on the screen. If you have forgotten your password, get help.
  3. Select your iPad, iPhone or iPod when it appears in iTunes. If your device does not appear in iTunes, know what to do.
  4. If you want to save data of health and activity of your device iOS or Apple Watch, you must encrypt your backup: check the box called Encrypt [device] backup and create a memorable password.
     Write down your password and store it somewhere safe, because there is no way to recover your backups iTunes without this password.
     If you do not need to save your health data and activity, you can make a backup that is not encrypted. Just click Back Up Now.
     
  5. After the end of the process, you can see if your backup completed successfully in the iTunes preferences > devices. You should see the name of your device with the date and time that iTunes created the backup. If you encrypted your backup, you should also see next to the name of your device.
     

  Best regards

• Can I reset my MacBook Air and restore the backup I made before to reduce others' storage space?

  Hello

  so I have the 126 GB MacBook Air. My problem is that the other takes 87 GB!

  So can I reset my laptop and restore the backup later like you do with iPhones to reduce the "other"?

  I guess this could work, but I'm afraid something away...

  I hope that there is someone who can help me!

  Thank you!

  There is nothing necessarily wrong with 'other' as long it's documents, etc. that you need.

  Make a backup and a restore just grow what you have now. I would not recommend it.

  If you don't think the number is correct you can reindex to see if that changes it: Spotlight: how to re - index folders or volumes - Apple Support

  These links may also help:

  OS x: what is 'other' space about this Mac? -Apple Support

  https://discussions.Apple.com/docs/doc-5142

• Cannot open my pdf files today. no problem before

  When I try to open my pdf files, they open but have become gibberish.

  Hi LEE N LOUISE BENNETT
   
  -You get an error message or error code?
   
  -Remember to make changes to your computer after that this problem started to happen?
   
  Try to disable the safe_mode of drive X and check if you continue to see the problem.
   
  You can disable the mode protected using the following steps:
   
  a. launch Reader X and select Edit-> preferences...

  b. select general in the left navigation.

  c. under the application startup uncheck 'Enable Protected Mode at startup'. Click OK.

  d. exit Adobe Reader X and re - open the PDF file and check.

• Cannot find files on clone super duper, I can restore from Time Machine backup?

  First of all, my apologies for cross posting.

  I hope I can explain my situation with enough clarity so that someone can help out me. I feel a little bit of panic.

  I've had a Mac mini that I sold so need to wipe. I first backed up using Time Machine on an external hard drive. Then, I used Super Duper to clone on a second hard drive. I didn't need a bootable copy of the training, but need access to data, applications, etc. on it from time to time. My intension was to access the data I cloned and stored on the hard drive of my current Macbook Pro. Well, that day came and I went to access my cloned copy of the mini and only see a list of users. I'm not able to find files, documents, and etc.even if I use spotlight to search for. So my questions are:

  1. Can I view the contents of the double machine differently to see more than a list of users? (that is WHERE IS MY THING?)
     1. I have error somehow in my approach?
     2. If I made the mistake with the super duper close, can I restore my time machine to the top of an external drive on another external drive? I want to restore my MacBook hard drive.

  Thank you!!

  I was running just an another SuperDuper! Clone.

• Backup files Vista - "Windows could not find any backup sets [file path]."

  I have a Vista computer.  The hard drive broke so until I replaced it I backed up all the files on the computer to another computer running Windows 7. I did it in the backup and Restore Center.  I made a backup of files, not a full backup of the system (I've seen the full backup of the system mentioned in other posts, but that was not an option... maybe which is only available on Vista Premium).  In any case, I replaced the hard drive and then try to restore the files, but I get the message "Windows could not find any backup sets [file path]."  Anyone have any ideas?  Thank you.

  Here is an article on the restore procedure:http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  Here is an article on the advanced use of restoration (during normal restore does not work):http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that thebackup location is not available " ")

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works).  I hope you find any error or discrepancy in your procedure and it will clear up and allow you to restore.

  I hope this helps.

  Good luck!
  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I select this option I get the dialog box 'Create image s system' but it cannot find any 'backup devices on this computer"and lists the error 0 x 81000036

  Error image system original title: windows 7 0 x 81000036

  I'm doing a backup system image.  When I select this option I get the dialog box 'Create image s system' but it cannot find any 'backup devices on this computer"and lists the error 0 x 81000036.

  I have an ESATA connection on my Dell laptop I was trying to make the image on.  I use the unit every day to save files and which works very well.  He just leaves me CCADE with the system image backup...

  any ideas?

  Hello

  ·         You have created a system image backup before that?

  ·         You did it changes on your computer?

  ·         Is your esata formatted NTFS drive?

  Try to save the image of the boot system: http://support.microsoft.com/kb/929135

  Note: make sure that you start the computer in normal mode after a repair.

  See also the linkfor more information about the backup: http://windows.microsoft.com/en-US/windows7/Back-up-your-programs-system-settings-and-files

• How to find a specific voice memo file in the backup from my iPhone to my Mac? I know where to find the backup, but not how to recover specific files. Thank you.

  How to find a specific voice memo file in the backup from my iPhone to my Mac? I know where to find the backup, but not how to recover specific files. Thank you.

  You can't look "inside" a backup. Just use iTunes to sync with your iPhone, then you'll see a separate category for voice memos in the sidebar.

• Windows XP Backup problem, cannot find the backup utility

  original title: windows xp backup problem

  I have a system with windows xp, I tried to backup the drive c: to the top, when I click on start, all programs, accessories, System tool, I see how to do anything else but up... i back cant find utility backup click on... then save my c: drive?

  Hello

  I suggest you follow the steps mentioned in the article given below to install windows on the system backup.

  How to install backup from the CD-ROM in Windows XP Home Edition

  http://support.Microsoft.com/kb/302894

  Also, I suggest you return the article mentioned below to learn how to use the backup utility.

  How to use the backup utility to back up files and folders in Windows XP Home Edition

  http://support.Microsoft.com/kb/320820

• Backup and restore cannot find any backup sets.

  I had to reinstall windows 7 prof 64 using the original recovery partition and want to restore my data files that I had backed up using the backup and restore windows.  The files are on a network drive.  "When I run the restore I have 'Browse' the network choose the folder labeled" backup files aaaa-mm-jj xxxxxx "but it comes back with the error message: Windows could not find the backup sets on \\xxxxx please select a different location.

  Early research indicated it could be a permissions problem and the network drive is not a Microsoft Windows type disk I copied the folder and all the files on my C: drive and checked that they were all showing all permissions to all the users/system/everyone etc.  I tried again.  Same result.  I tried now selection of locations right differnet down the folder hierarchy (for example: in 'Catalogue' records and individual records date) but still get the same message.

  I realize that I could go in the individual zip files and restore everything manually, but the backup set has 9 different files and 525 zip datr files each with a tree long through the files of the hard disk C: before getting to the part of My Documents with data.

  It would be so much easier than Microsofts back/restore program does what it is supposed to do.  The only references I found in the web site of Support MS concerned questions of authorisation and in ensuring that the original folder is in the format "Yyyy-mm-dd of backup files xxxxxx"  I've done both.

  Any help gratefully received.

  Larry Gru

  Original title: restoration of Windows can't find the backup sets

  I solved the problem. It seems that, for a new installation (reinstallation of the operating system), it is necessary to set up a backup to the location of the original backup. After saving the new facility in the same place as the old backups, older backups are available to be applied.

• "Cannot find file" dialog box

  I get a dialog box after you start Win7 32-bit which indicates just that "cannot find file."

  He is obviously trying to load something but I have no idea what...

  Any ideas where it might come from?

  Is there a utility somewhere that shows this boot file is loaded?

  Thank you :-)

  This will do what you're after.

  Autoruns from Sysinternals

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

• Win 7: incrementing error backup and restore previous "Windows backup has not been implemented" and that "Windows cannot find a backup for this computer".

  * - Title original - Win 7: incrementing previous backup and restore

  Last week, I did a "backup and recovery" on my Win 7 64 bit computer, create a folder WindowsImageBackup 118 GB on an external HARD drive.

  I like incremental backup the same material on a base weekly, I tried to do the first incremental backup this morning.
  However, my "Backup and Restore" menu control configuration\systeme and securite\ tells me that "Windows backup was not put in place" and that "Windows cannot find a backup for this computer", even if the external HARD disk is attached and recognized.
  How can I set B R & to realize progressively the same backup that I did last week?  I don't want the schedule to run regularly, but will do it manually.
  Thank you
  Colin

  Hello

  Did recent changes to the computer?

  I suggest you to refer to these articles and check if they can help you.

  What backup settings should I use to maximize my disk space? : http://windows.microsoft.com/en-NZ/windows7/What-backup-settings-should-I-use-to-maximize-my-disk-space

  Backup and restore: frequently asked questions: http://windows.microsoft.com/en-us/windows7/back-up-and-restore-frequently-asked-questions

  For more information:

  Windows backup does not an incremental backup media when the Windows Media Player Network Sharing Service is enabled in Windows 7: http://support.microsoft.com/kb/981470

  I hope this helps.