Cannot save the Composite SOA on IOM

Similar Questions

• Cannot test the Composite SOA

  Hello

  I'm new to SOA and when I deploy a composite, I'm unable to test the composite. As the test of the EM Console button is disable. It's a simple project with an FYI the task and start and end of activity.

  
  

  How does your process starts or what triggers the composite soa?

• Cannot save the no http bookmarks in firefox

  Cannot save the no http bookmarks in firefox

  Among the Favorites of standard Web sites registered on my IE toolbar, I have several of my own making html documents/pages. These start obviously by a non-http address.

  Include pages that contain an array of webcams on one page or a page that opens several sports venues each in their own tab, or strip of video covering windows live tabs stormchasing chase, weather radar, scanners of emergency etc etc.

  An address would take the format on the lines of
  'C:\Documents and Settings\All Documents\Football results and Tables\UK.html'

  Firefox insists on adding "http" before the C:\ (and unlike IE, it also adds the %20 for space.)

  Can someone help get FF to accept a favorite that is not a Web site.

  It's ok I just solved it me, waived the need to type %20 for each space.

  Need to add before c: the following

  file:\\\

  So a sample address

  file:\\\C:\Documents and Settings\All Documents\Football results and Tables\UK.html

• HPDM 4.6 SP4 cannot save the files deploy subtask

  Recently, when you create a new task to deploy a file and try saving it I get:

  "Cannot save the subtask to deploy files.

  If I create another type of task it saves without problem. The only time where there is a problem, is if I am trying to add files to my task. If I try to add a file to an existing template, I get the unable to merge the error of the model.

  I have checked the permissions in the main repository, run the test, all come back fine. I even tried manually adding files to the repository and that's ok too. I can't find something as interesting in the newspaper. I should mention that we did a database migration recently, but I test all features and managed to save a task of deployment without problem.

  Try to get out of the individual tasks that contains files (in this case the msi Hotkey filter) I get the following:

  2015-07-03 14:08:21 [error code: 5260288] [Module: MasterController] [category: input/output disc] 2015-07-03 14:08:21 [error details]:.\SyncTask.cpp@91: failed to sync files. .\port_layer\ftpclient\fileclient.cpp@816: failed to get the data from the file. .\port_layer\file_io\filefuncs.cpp@86: failed to get the data from the file : D:\HPDM/Repository/Files/ToDeploy\Hotkey filtre.\port_layer\file_io\filefuncs.cpp@84: the system cannot find the specified file.

  In the masterrepository log:

  2015-07-03 15:14:28 ERROR could not remove the package: Test. \port_layer\ftpclient\fileclient.cpp@235: has no file stat, RemoteDir: / files/repository/ToDeploy, name: Test.
  .\port_layer\ftpclient\fileclient.cpp@390: could not get the file stat, RemoteFile:\\10.7.1.29\HPDM$/Repository/Files/ToDeploy.
  .\port_layer\ftpclient\ShareFolderClient.cpp@424: has no file stat data.
  .\port_layer\file_io\filefuncs.cpp@86: failed to get the data from the file : \\10.7.1.29\HPDM$/Repository/Files/ToDeploy\Test
  .\port_layer\file_io\filefuncs.cpp@84: the system cannot find the specified file.

  2015-07-06 09:11:44 CTaskReceiverThread::recvTask() of ERROR: unable to receive data from ssl server.
  2015-07-06 09:11:44 CTaskReceiverThread::recvTask ERROR failed. Returns the value-1.
  2015-07-06 09:12:10 sendReoprt() of ERROR: unable to send data to the server.
  2015-07-06 09:12:10 CReportSenderThread ERROR::recvTask(): could not receive data from ssl server.
  2015-07-06 09:12:10 ERROR CReportSenderThread::recvTask failed. return value = - 1

  10.7.1.29 refers to a repository of the child, I have about 30 repositories of the child.

  I have not changed any configuration, I don't really understand how this happened, I can't even create my first Contact rules, scheduled tasks or create new tasks/templates. We are in the midst of a large-scale deployment so that any help ASAP that would be most appreciated!

  Thank you

  Luke

  This has been resolved with the help of Chen_HPDM by e-mail.

  We changed the console.conf to:

  HPDM. NEWSPAPER. LEVEL = DEBUG

  (console.conf can be found in C:\ProgramData\Hewlett-Packard\HP device Manager\Console\conf)

  I ran the task to deploy the files again and had the following in the log:

  2015 07-09 09:43:41 [WT-EventQueue-0] DEBUG Console - Request (20201): add templates

  2015-07-09 09:43:42 [WT-EventQueue-0] DEBUG Console - [TimeSpan] (20201): Add models [true]: 86

  2015-07-09 09:43:42 [WT-EventQueue-0] TemplateManager DEBUG - processAddTemplate: OS = HPWE8_64, name = New Test, category = files and the registry, status = transfer and tip =

  2015 07-09 09:43:42 [WT-EventQueue-0] DEBUG Console - Request (20202): update of model

  2015-07-09 09:43:42 [WT-EventQueue-0] DEBUG Console - [TimeSpan] (20202): update model [true]: 142

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files\ToDeploy\_Temp

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files\ToDeploy

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files\ToDeploy\_Temp

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files\ToDeploy

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp

  2015-07-09 09:43:45 [Thread-43] DEBUG MPFactory - Call TemplateMP.

  2015-07-09 09:43:45 [Thread-49] DEBUG TemplateManager - processAddTemplate: OS = HPWE8_64, name = New Test, category = files and the registry, status = transfer and tip =

  2015-07-09 09:43:45 [Thread-49] TemplateManager DEBUG - processUpdateTemplate OS = HPWE8_64, name = New Test, category = files and the registry, status = failure, tip =

  The Console could not delete a temporary file created previously called HPDM_Temp. I renamed the file and was able to create the task.

  I can't wait to find my question on the forums, and someone didn't post the solution so I hope this helps and thanks again Chen!

  Luke

• Errro: Cannot save the Terminal Server when he tried to use the program Sony Vegas

  Original title: cannot save the Terminal Server.

  I'm having a problem using my program "Sony Vegas". It worked OK. But now gives me an error. "Cannot save the Terminal Server. I don't know if this a problem of Windows, or Sony Vegas. Please tell us how to solve this problem. Thank you.

  Hi barnstable,.

  Try these steps and check the result.
  Step 1: Check if the Terminal Services service is disabled
  a. Click Start, click Run.
  b. type services.msc, and then click ok.
  c. in the list of services, double-click Terminal Server Services.
  d. change the startup type to automatic and start the service.
  e. click ok to apply the changes.
  f. check if the problem persists.

  Step 2: If the problem persists, uninstall and reinstall the program Sony Vegas
  see How to change or remove a program in Windows XP .
  b. Once you have deleted the program, restart the computer.
  c. reinstall the program.

  For additional support, get in touch with Sony support team.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot save the attachments

  Original title: RECORDING of the parts JOINED IN VISTA

  WE CANNOT SAVE THE ATTACHMENTS. DOWNLOAD THE MESSAGE ERROR SAVING ATTACHMENTS. CHECK DISK SPACE. FILE IS NOT EVEN 80KO. These are PDF files.

  Thank you

  JO

  Try to compact and repair the database with this tool.
   
  
  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx
   
   
  If this does not help, what security program do you use? Norton & McAfee are known to cause this problem. Restart and turn off your security program. Open WinMail and see if the attachment opens in your PDF reader.
   
   
   

• Windows Movie Maker-cannot save the film project

  Save movie maker file as a movie file.

  When I try to save my project, I get an error message cannot save the movie to the specified location. This is a short video just a minute and a half or more. I have herd that if you owe a lot of stuff in there it will not save. I cut small pieces of clips and them repeated once or twice more as 3 - 5 times could this be it? What should I do to solve this problem and save it?

  When I try to save my project, I get an error message cannot save the movie to the specified location. This is a short video just a minute and a half or more. I have herd that if you owe a lot of stuff in there it will not save. I cut small pieces of clips and them repeated once or twice more as 3 - 5 times could this be it? What should I do to solve this problem and save it?

  ==============================
  More than likely one or more of your source
  the files are not compatible with Movie Maker.

  See the following article:

  Movie Maker - problem solving-
  "Can't save a movie."
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, wmv

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Movie Maker error: cannot save the movie to the specified location.

  When I wanted to save my movie on my computer, I received an error at 0%, it is said:

  "Windows Movie Maker cannot save the movie to the specified location. Verify that the original source files used in your movie are still available, that the backup location is still available, and that there is enough available disk space, and then try again. »

  There is nothing about it, I even 20 GB of free space, the video is only 1.24 MB. and files original source is always available.

  Someone HELP me please! I use Windows Vista Home Basic.

  original title: Windows Movie Maker 2.6 problems during the recording of movie files

  There are to many free converters that you can
  downloaded on the net, but for a few
  MP3 files... There are free converters online.

  The following site may be worth a try:

  Convert online
  http://www.online-convert.com/

  Open the drop window in the field of Audio Converter.

  Select... WMA

  In the next screen, left click on the Browse button and
  Navigate to the MP3 you want to convert

  Left, click Convert.

  When the file is converted will prompt you to
  download it.

• Cannot save the settings of e-mail from SAN HQ

  I used to be able to turn the notifications specific to the HQ of SAN.  I've updated a few times and had not tried for a while but now I can do it no longer.  When I try to disable an alert I say pop-up error: "cannot save the e-mail settings.  The SAN HQ was unable to save the message view recent changes.  Unable to save changes made to the Group (group name) because of insufficient access permissions or administrative credentials.  Verify that your account has all required permissions and administrator-level access to update the selected group. "Then I me it is a question of perm but don't know where.  SAN HQ connects very well to all my reports and datasets, etc.  Where would this leave?  Any help would be greatly appreciated, thank you!

  Your user and group must have all the permissions for the install directory where SANHQ has been installed.

  I'll try again with a local administrator account vs account domain.

• Cannot save the file (OS6)

  UPDATE: just found out that documentToBlob is compatible with the OS5. How to do the same thing in OS6?

  http://www.BlackBerry.com/developers/docs/WebWorks/API/BlackBerry.utils.html#.documentToBlob

  I wrote an application several months ago, which works very well with the OS5. But it does not work with OS6. Here is a simple example of creating a file, the application needs to do:

  config. XML

  
      http://www.w3.org/ns/widgets"
          xmlns:rim="http://www.blackberry.com/ns/widgets"
          rim:header="RIM-Widget:rim/widget"
          version="1.0.0">
       File Test
      Testing file
       http://www.example.com/" rim:copyright="no copyright" email="[email protected]">Example
       
       
       
       
       
       
       
      
      
  
  

  test.html

  
  
      
      
      
  
  
      testing
  
  
  

  scripts/test.js

  function loadTest(){
      alert("start");
      var filePath = "file:///store/home/user/appTest.xml";
      var xmlString = "test_data";
      var parser = new DOMParser();
      var doc = parser.parseFromString(xmlString, "text/xml");
      try{
          var blobData = blackberry.utils.documentToBlob(doc);
          blackberry.io.file.saveFile(filePath, blobData);
          alert("file saved");
      } catch(e) {
          alert("unable to save file: "+e.message);
      }
      if(blackberry.io.file.exists(filePath))
          alert("file exists");
      else
          alert("file cannot be found");
      alert("end");
  }
  

  Output of Simulator OS6 (6.0.0.337):

  • Star
  • Cannot save the file: undefined
  • file cannot be raised
  • en

  No idea why it does not work

  I couldn't find a solution to this, nor could anyone help. I had to rewrite my application to store data in a database instead of an XML file.

• Cannot save the schema using the client - crashes ' start record contour.

  All,

  I use version 9.3.1 (yes I know we should be upgraded) and EAS installed on my machine (not web-based version).  For some reason, my computer crashed last week so I had to reinstall EAS.  After I did, I started having the problem of not being able to save a scheme and it gets stuck on the "start record sketch."

  It is not a java problem, that I'm not using the web browser.  In addition, a colleague has the same version of java and isn't in trouble. Also, I got this version of java (1.6) on my machine for months.

  Any ideas.

  Thank you

  Check: Cannot save the schema with Essbase Administration Services and Version Java JRE 1.6 (Doc ID 847487.1)

  It indicates that the client computer does not have the supported JRE versions.

• CS6 flash cannot save the document

  I post a new discussion of that since I couldn't find an answer for this in a Windows computer. I use Windows 8.1 and Flash CS6 using creative Application of cloud.

  Whenever I try to save a FLA document, it gives an error saying it "cannot save the document as [name of file] try to change the file location or file name.

  I do not work on a network, but have been save the file to my desktop and it back to my network file when I am done Edit. But now its happening even with the local files on my desk. Did anyone else encounter this problem or found a fix?

  Hey mediachic,

  We did a lot of troubleshooting for this issue, and WITHOUT help from Adobe, which support so that never. They just repeat what they don't support networks and advise to do not open or modify files on a network because he may / will cause corrupted files and not allow you to save. Try to save the file to a local drive or a flash drive and work on the project from there. So far, it is the only work around that we found for this but it isn't bulletproof. We have still a few users who are breaking in flash but not as often. In addition, make sure that there are no updates waiting for Flash if it is updated to Flash and reboot. Hope that helps. Good luck!

• Cannot save the document in InDesign CC on MAC running Maverick containing pdf or image files.

  Cannot save the document in InDesign CC on MAC running Maverick containing pdf or image files. Removal of the pdf / file picture allows savings.  Any thoughts?

  If you run suitcase, try to remove the plugin of automatic activation and see if it behaves better.

• Error during the deployment/Undeploying the composite SOA

  Hi all
  
  I am a new bie to OIM 11 g.
  
  I created a simple batch file with the commands to deploy/Undeploying/Disbaling/activate the composite SOA. I'm trying to deploy/Undeploy/Disbale/enable SOA composites using the batch file. Here is the batch file that is created.
  
  ECHO disabling the composite SOA
  call the Ant f D:\Oracle\Middleware\Oracle_IDM1\server\workflows\registration\registerworkflows-mp.xml disable
  BREAK
  cancel the deployment of call ant f d:\Oracle\Middleware\Oracle_SOA1\bin\ant-sca-deploy.xml
  BREAK
  call ant f d:\Oracle\Middleware\Oracle_SOA1\bin\ant-sca-deploy.xml
  BREAK
  call the Ant f D:\Oracle\Middleware\Oracle_IDM1\server\workflows\registration\registerworkflows-mp.xml activate
  
  Disable and enable work correctly. But to undeploy and deploy I get the following error.
  
  "d:\Oracle\Middleware\Oracle_SOA1\bin\ant-sca-deploy.xml:78: taskdef class oracle.integration.platform.blocks.deploy.servlet.client.ant.DeployComposite not found.
  
  Please suggest what needs to be done to solve this problem, because it's very urgent. Thanks in advance for your help.
  
  Thank you
  PT

  How about environment variables when you run through your batch file? Have you set the ORACLE_HOME correctly in your installation of JDev directory?

  -Marie

• Adobe flash error: cannot save the document please try to save to a different file name

  Hello

  I am to change a few files fla with my Adobe Flash Professional. Suddenly he stopped to save and gives me an error; Cannot save the document under... Please try to save to a different file name or to another location.

  I changed the location where to save the files, but I still get the same error.

  Is there anyone who knows how to deal with this error?

  Thank you

  zipper.  right click on its icon or start the program and click "Run as Administrator".  Save your fla.

  If that fails: restart your computer, create a new directory on your desktop and save a fla test (for example, named test) to this new directory.  any problem?