Cannot SELECT newly created tables

Similar Questions

• Newly created table not appearing is not in ESXi

  Newly created table not appearing is not in ESXi

  HP DL380 G5

  ESXi 5.5.0

  Smart Array P400

  I created the table using HP via SSH command line utility with the command on 2 x 300 GB drives

  hpssacli slot = 1 ctrl create type = ld = 1I:1:7, 1I:1:8 size drives = raid 300 = 1

  Grand - LEDs are lit and all is good - do a quick check of the State (note the new table is table C)

  Array has

  then 1I:1:5 (port 1I:box 1:bay 5, SAS, 72 GB, OK)

  then 1I:1:6 (port 1I:box 1:bay 6, SAS, 72 GB, OK)

  then 2I:1:3 (port 2I:box 1:bay 3, SAS, 72 GB, OK)

  then 2I:1:4 (port 2I:box 1:bay 4, SAS, 72 GB, OK)

  Table B

  then 2I:1:1 (port 2I:box 1:bay 1, SAS, 36 GB, OK)

  then 2I:1:2 (port 2I:box 1:bay 2, SAS, 36 GB, OK)

  Table C

  then 1I:1:7 (port 1I:box 1:bay 7, SAS, 300 GB, OK)

  then 1I:1:8 (port 1I:box 1:bay 8, SAS, 300 GB, OK)

  Problem, I have now, is that it does not appear in storage, even when I re-fresh it or try to add additional storage. Is there anything else I need to do for the newly created table? On a quick google, I see nothing. I wonder if it is because I created the mirror with the actual size of the readers, however if this was going to be a problem, I don't know that it would be bombed when I created it.

  The problem is probably that the partitions exist at all. Unless you need these NTFS partitions, take a look at http://kb.vmware.com/kb/1008886 ("information partitioning compensation in ESXi using the DD utility" section) to see if that solves the problem.

  André

• loading data into the newly created table

  I have a basic question
  
  
  I have a table named 'A' and it has 5 columns
  
  Now, I created a new table 'B' and copied the 4 columns of table "A".
  
  Now, I have to add the 5th column along wiith given in table "B".
  
  my table for 'B' have now 5 columns and the same data that the table 'one '.
  
  Could someone tell me the procedure. According to my knowledge, it is not possible. Can I even the reason for it.
  
  Note: With let them down my new table
  
  Thanks and greetings
  Pallis

  Assumption: You have the following table:

  Table1 (a number, b, c number, number d, e number);

  You made Table2 from table1 as below with the same data as for these 4 columns table1 table2.
  Table1 (a number, b number, number c number d)

  Now, you want to copy the e column too in table1 from table2...

  Means the simplest is:

  drop table table2;
  crate table table2 as select a,b,c,d,e from table1;
  

  Another way is:

  alter table table2 add e number;
  
  update table2  t2
  set  t2.e = ( select t1.e from table1 t1 where t1.a=t2.a and t1.b=t2.b and t1.c=t2.c and t1.d=t2.d);
  

  If you have the primary key on table1, then only the primary columns must be mapped in this inner query where clause.

  Kind regards...

• Merge 8 cannot start newly created BootCamp

  2015 Macbook, OS x 10.11 B6, Fusion 8 Pro.

  When I try to add BootCamp in Fusion 8 I got the following errors.

  You do not have write access to a partition

  

  I click on allow all and then get the following error of incorrect file descriptor

  

  Try again by clicking the same results.  When I cancel, I get this error, VMware Fusion can not synchronize with the disc before you cancel it.

  

  I can boot into fine bootcamp, I ran a repair on my disk and partition in OS X without error.   My partition scheme seems OK, but I'm not an expert, just from what I've seen.  Someone at - he seen elsewhere or know a workaround?

  

  Click on "Deny All".

• How to get data in the procedure after CREATE TABLE table1 AS SELECT * from table2

  Hello

  can any body tell me how to get the data in the new table created in the procedure. because it gives following error.

  • Error (47,21): PL/SQL: ORA-00942: table or view does not exist

  tableName: = "BCKUP_" | TO_CHAR (sysdate, 'ddmmrrrr');

  tableDDL: = 'CREATE TABLE' | tableName. "AS SELECT * FROM Table1 where to_char(MSG_IN_TIME,''dd-mon-rrrr'') < sysdate - ' | daysNumber;

  EXECUTE IMMEDIATE backUpDDL;

  COMMIT;

  DELETE FROM Table1;

  How to select the data in the newly created table. as...

  Select * from ". tableName;

  Do not choose anything to get the number...

  Just after backupDDL EXECUTE IMMEDIATE, simply refers to SQL % ROWCOUNT - who will be the number of lines.

  Oh and DDL engages automatically, your commitment is redundant.

• Select and validate the newly created lines (data stop) in ADF

  Hi all
  
  Here's the problem of mine: I want to validate and save the data in the SERIAL_EXCHANGE table, include NEW_SERIAL_NO and OLD_SERIAL_NO. The OLD_SERIAL_NO is not allowed to save in 2 files, I used the getCurrentRow method to select the new created line and validate it. This method works when I do not change the selected line and create other rows consecutively. But when I do, the method does not work well.
  
  So I want to find a way to select newly created lines and validate their value before they are committed to the database. Please help if you have an idea how to solve.
  
  Thank you
  VnMa

  This in the right place - DB

  unique index on the old serial number
  foreign key to validate the existence of the old serial number of the other table

  In the ADF, you would use a unique key for the uniqueness and association EO to validate the existence of the other table.

• Insert the result of a query select in another table

  Hello
  
  I have a strange problem when I try to insert all the results of a query select in another table, using the declaration of the order.
  
  With the declaration of COMMAND it works fine
  Work:
  ------------------------------
  INSERT INTO ADART01 (SELECT (codart)
  "STOCK". "" CODART_STO ".
  Of
  "DB". ' ' 'ACTIONS');
  ------------------------------
  
  But if I try to sort the result using the declaration of the ORDER, I have the following error:
  Error: ORA-00907 missing right parenthesis
  ------------------------------
  INSERT INTO ADART01 (SELECT (codart)
  "STOCK". "" CODART_STO ".
  Of
  "DB". "" "ACTIONS"
  ORDER BY
  "STOCK". ("' CODART_STO ASC ');
  ------------------------------
  
  Any idea?
  
  Thank you for your help,
  Angel.

  delete "()" to select

  create table test1 (a number, b varchar2(100));
  
  insert into test1
      (a, b)
      select level, 'level ' || level from dual connect by level < 101;
  
  insert into test1
      (a, b)
      select level, 'level ' || level from dual connect by level < 101 order by to_char(sysdate - level, 'D');
  
  select * from test1;
  
  drop table test1;
  

• To create an interactive report in the apex by selecting from multiple tables

  Hi, I am creating an interactive report by selecting from multiple tables.

  SELECT w.FIRST_NAME as name, w.SURNAME as name, i.ROAD Road, i.DATE_OF_INC as DATE_OF_INC, S.STATEMENT as a STATEMENT OF Declaration

  JOIN THE

  WITNESS w

  ON w.witness_id = s.FK1_WITNESS_ID

  JOIN THE

  Incident I have

  WE

  i.incident_no = w.FK1_INCIDENT_NO

  JOIN THE

  user_station ps

  ON ps.station_id = i.nearest_station_id

  JOIN THE

  the user in.

  WE

  in. STATION_ID = ps.station_id

  WHERE po.officer_id = 1

  by I continue to encounter this error "the report query requires a unique key to identify each row. The supplied key cannot be used for this query. Please change the report attributes to define a unique key column. "ORA-01445: cannot select ROWID from where sample, a join without key preserved table view '

  So I googled around and found that in the attibutres tables report, I need to change the "LINK" COLUMN so first, I changed "Link to custom target", but the report is so I changed it to "Exclude link Clolumn" again, the report didn't report and I STILL got a blank page with only the tabs.

  I wonder you can not create a report by selecting from multiple tables?

  If you can please I need your help.

  Thank you

  You can, but in this case, it might be easier to build your report tables that are joined Oracle views and then build your report out of the newly built sight...

  Or wrap a selection around your selection with joins, and then make the where clause on the external selection...

  Thank you

  Tony Miller
  Software LuvMuffin
  Ruckersville, WILL

• ORA-01445: cannot select ROWID, or sample, a view of join without key - preserved table form w/report and LOV

  I create a page "Form on a Table with Report" (APEX 5). Table I has 3 columns: cat_key, item_value, item_description. The cat_key is a foreign key in a table with columns cat_key, cat_value. I created the report and everything works fine.  The page of the report shows my domain cat_key in number, so I want it instead to display the cat_value. I change the field cat_key to a text based on LOV, select my LOV and now when I view the page of report I get the "'ORA-01445: cannot select ROWID from where sample, a join without key preserved table view ' error." The report uses the ROWID as a link to the edit page field.

  If I use the same tables and even shared LOV in a report page interactive, it works fine.

  What I am doing wrong?

  This is a limitation of the IR Apex will rewrite your query to a query that includes the lookup table and the columns. So now you have actually created a query on an inline view, which causes the error. You can see the query apex created when running in debug mode. APEX will join the table of choice with your primary table. For example from one of my IR:

  Select 'ID '...

  "MSL". "" HIS_COUNTRIES "=> my primary table

  ) ) b,

  (select rv_meaning d, rv_low_value r

  of msl_ref_codes_table

  where rv_domain = "JOHN".

  ) L1 = > query My LOV Lookup
  

  ...

  So, if possible, base your reports and forms on the real primary key, no rowid.

  You can also write the IR query with the search yourself:

  Select T1.rowid...

  of primary_table T1

  look_table L1

  ...

• I can connect to my administrator Local account, but cannot connect to a newly created Local Standard account. How can I fix?

  Hello
  I am running Windows 7 Home Premium x 64 bit on my main PC that uses an SSD. Recently, when I was about to create new profiles of user account for my children, I came across a few connection issues on newly created accounts.
  Here's a breakdown of what exactly is going on:
  1) turn on the computer. Starts Windows normally, auto-journalisation me on my administrator account. Nothing unusual appears, just the regular, the windows desktop and files.
  (2) I go into my control panel (category view) | Accounts of users and parental control-link under click on "Add or remove user accounts". Click on "create a new account | Entered the name (for this example, I'll call it reverse) | Apply the account type "Standard account" | Click on "create account". Close all open windows. Click Start and then click 'Quit' from the menu
  (3) once I clicked on 'Leave', it says "logging OFF... "or something similar, and I just click on the new icon for the newly created account that I just made. Very quickly, the screen flashes "Welcome" then flashes black and then reloads the blue background with the words "Logging Off". It flashes black once again and brings me to choose one account screen, where I see my newly created account and my administrator account
  (4) I try clicking on the icon of the new account again, the same thing is happening. I'm trying to connect to my administrator account, it works perfectly
  (5) Event Viewer records these specific messages:
  http://i1057.Photobucket.com/albums/t391/Icerolous/issue_1_zps08c4dab9.jpg
  http://i1057.Photobucket.com/albums/t391/Icerolous/issue_2_zps14e0afa8.jpg
  http://i1057.Photobucket.com/albums/t391/Icerolous/issue_3_zps3ededbdc.jpg
  http://i1057.Photobucket.com/albums/t391/Icerolous/issue_4_zps09916210.jpg
  http://i1057.Photobucket.com/albums/t391/Icerolous/issue_5_zpsb1850ec6.jpg
  http://i1057.Photobucket.com/albums/t391/Icerolous/issue_6_zps5b5612f0.jpg
  (6) I have already run the "sfc/scannow" command in and out of safe mode. Windows reports that no files have been tampered with
  (7) I don't have any system on this SSD, the restore points
  8) ran an antivirus scan (although this machine is not connected to the internet that often, mostly used to store local applications for local use)
  I am open to ANY suggestion and someone has solutions capable of solving this new auto account sign out of the question. I'm afraid that the reload of the operating system on my computer is too expensive (data wise) right now. Its connected to a HARD drive with programs.

  Sorry I took so long to come back - but I have a lot on my plate right now.
  Have you tried to create an administrator account?
  If it works, can change you it to a Standard user account?

  Check if the computer browser service and the Server service are started.  If this isn't the case, please start them.

  Check if the different events and error reporting services are started.  If this isn't the case, please start them.

  Registry errors also:
  Event [96]:
  Log name: Application
  Source: Microsoft-Windows-user profiles Service
  Date: 2012-09 - 18 T 14: 29:29.929
  Event ID: 1542
  Task: n/a
  Level: error
  Opcode: Info
  Key words: n/a
  User: S-1-5-18
  User name: NT AUTHORITY\SYSTEM
  Computer: Dreyfus-PC
  Description:
  Windows cannot load a file of the registry classes.
  DETAIL - the system cannot find the specified file.

  See this post for a discussion of the possible fixes: http://answers.microsoft.com/en-us/windows/forum/windows_vista-performance/event-id-1542-user-profile-service-and-missing/d7df458e-f8f7-4e2f-bd65-16b9ceeb5631

  You remove/tweak the OS installation on the SSD drive?  If some settings have prevented appropriate services of loading (so that the applet of Control Panel does not work)?  If this is the case, I would have to suggest a backup, wipe and a reinstallation of Windows without any adjustment being made (at least until you have setup the Standard user accounts).

  Good luck!

• Cannot open a session to the newly created user account

  I created a new standard user account via account management/accounts/user control.  When I log into the admin account and try to connect to the newly created account, I get the error message "the service user profile Service has no logon" "could not load user profile.  Click OK and it disconnects.  I can still log on to all the other 5 accounts that I created after I implemented this new laptop (preinstalled with windows 7).  When you click on a new account the first time, the system should establish the office and create the user records.

  I went into the Admin account and checking the application event log.  Event ID 1509 "Windows cannot copy file C:\Users\Default\ to the C:\Users\New Test Account\ location.  This error can be caused by insufficient security rights network problems. "DETAIL - access is denied.

  I solved my problem.  The index was at the event journal entry.  The permissions on the folder C:\Users\Default screwed up. (not sure how that happened).  I compared the authorization for this folder on my laptop win 7 with permissions for the same folder on my computer vista laptop.  Computer laptop win 7 has a few additional entries.  I deleted them and now I can create and open a session on new accounts on the laptop win 7.

• Is it possible to create a shuttle component in Oracle ADF, where the available and selected lists are tables of the adf?

  Hi all

  
  

  We use JDeveloper Studio Edition Version 12.1.3.0.0 and deployed on GlassFish Server Open Source Edition 3.1.2.2 (build 5) and connect to the SQLServer database.

  
  

  Is it possible to create a shuttle component in Oracle ADF, where the available and selected lists are tables of the adf?

  
  

  
  

  I did a POC sample on it. I can share with you. I can't put in my dropbox because dropbox is blocked in my network. Share your email. I'll send the POC through

• How to view a newly created line only in adf table?

  Hi all

  JDEV 12.1.3.0

  When you drag move a VO on a page as a table of adf, it displays all the lines available in the whole of lines. I want to display only the rows that are newly created in the user interface.

  I achieved this goal by creating a transient "RowStatus" attribute, which will be the State of the entity (0-1 new, unmodified, 2 - modified) and I filtered the table using this status of line by double clicking on the VO and specified a filtered attribute and the value. But the performance is very poor, because I think it makes even all records and only newly created filter lines.

  Is there another way optimized to achieve?

  How to achieve this programmatically?

  If I run VO.executeEmptyRowSet () when the page loads, the table is rendered empty at first, but after call CreateInsert operation, all rows are returned with this new line.

  You see the same behavior if you create lines programmatically (with: vo.createRow (); vo.insertRow (row)) instead of CreateInsert?

  If it does not then only "programmatic" option is probably to set where clause 1 = 2

  Dario

• create table as select or parallel table / * + parllel() * /.

  Dear Experts,
  
  
  I have two huge table almost 300 GB each.
  

  create table as 
  select * from table t1 ,t2
  where t1.row_id=t2.row_id

  How to run this query in parllelism. Withou Parlell, it takes too much time.
  
  as it should be
  

  create table parallel 15 as 
  select * from t1,t2;

  or in another way
  
  and if it was it y 3 table to join to

  My * wrote:
  Dear Experts,

  I have two huge table almost 300 GB each.

  create table as
  select * from table t1 ,t2
  where t1.row_id=t2.row_id
  

  How to run this query in parllelism. Withou Parlell, it takes too much time.

  as it should be

  create table parallel 15 as
  select * from t1,t2;
  

  or in another way

  and if it was it y 3 table to join to

  What happens if the slowdown occurs on SELECT it & not create?

• cannot select data in a nested table?

  why we cannot select data in a nested table?
  
  

  DECLARE
      TYPE MY_ARR IS TABLE OF VARCHAR2(15);
      IDArr MY_ARR;
  BEGIN  
      IDArr := MY_ARR();
      select ename into IDArr from emp;
  END;
  /

  806540 wrote:
  why we cannot select data in a nested table?

  DECLARE
  TYPE MY_ARR IS TABLE OF VARCHAR2(15);
  IDArr MY_ARR;
  BEGIN
  IDArr := MY_ARR();
  select ename into IDArr from emp;
  END;
  /
  

  It also isn't a such thing as a ' + nested table + "-despite what the documentation calls them. The CORRECT term is the table. Since the dawn of programming. And called 'paintings' in many languages of programming and data structure theory ever since.

  In Oracle, the term "table" has a very precise meaning. A table in PL/SQL language nothing BUT a table at all. A completely different data structure that does not have the characteristics of an Oracle table.

  The code you wrote is also dangerous. If there are 100,000 rows in this table, you will copy all 100,000 rows in a PL/SQL table - that resides in the memory of the very expensive server called the PGA (process private memory). You can cause a serious impact on the memory of the server with this approach of poor quality - I saw such a code crashing the production servers.

  So let's not terminology. Is the wrong approach. Code is wrong.

  So why not rather tell us what you're doing, or trying to understand, instead?