Cannot send a file. Has said too much. Need to split the 4 pages so I can send them individually.

Similar Questions

• My file has plenty of empty space 'outside' of the work plan that I can't get rid of? How to crop the file to the artboard size real?

  

  Above is my plan of work and space to work, but when I try to resize the image (or save it in jpeg format to show the problem I have) there is a ton of white space outside the artboard and the crop tool and two work plan tool say that my file is not as large as the size above , but its been as big as the screenshot below.

  

  I can't find anyone else having this problem. Am I the only one? How can I solve this problem? It is to be a huge problem for web design. And he did it for all of my projects as web design he updated to have work plans.

  Hi Nicole,.

  I'm sure that it is a problem that we followed. We have not addressed it yet, but it's on our list of things to fix.

  Plan of work documents have a canvas in auto-expand; This is part of the user experience, which gives a feeling of infinite to the document; You can place things anywhere in the view, and they should remain visible no matter where you drag. In order to maintain this illusion, paint us the entire surface to mate with the same color outside work plans.

  Hide us this canvas from you, even if it's still there. You can see how big it is at any time by choosing "Image > canvas... size. ». That size will change as things move around, getting bigger and smaller than necessary. The hidden canvas size will break to the next more or less 'limit of diamonds", which is nominally in increments of 1024 pixels. This is done for performance.

  The problem is that the export code is really not updated as the work plans can develop and reduce the canvas. When you export a document of work plan, it looks at the current size of the Web and uses only. That's why you get that extra white space. This extra space problem happens also for other things, like thumbnails of document. We agree it's pretty boring, and as I said, it's on our list to fix.

  Try this workaround:

  1. download your ready to export document.

  2. in the work plan tool, select the gear icon (top tool bar, far right) and uncheck auto-size canvas

  3. Select the Rectangle tool and cover the artboard from edge to edge. (Snap allows here)

  4. Select the crop option. This can reduce the canvas to just the boundaries of the artboard.

  5 export under..., choose your format, for example PNG. and export.

  6. don't check any extra white space.

  Note that "Web auto-size" is a property of document-sticky and is saved with the document.

• My Mac has said that I don't have the necessary permissions, (although I repaired permissions and checked that I am an administrator of this computer) for the upgrade - what can you tell me what the problem is? Mac 10.5.8

  My Mac has said that I don't have the necessary permissions, (although I repaired permissions and checked that I am an administrator of this computer) for the upgrade - what can you tell me what the problem is? Mac 10.5.8

  This has happened

  Each time Firefox opened

  I tried to upgrade to version 2.0

  User Agent

  Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en - us) AppleWebKit/533.16 (KHTML, like Gecko) Safari/533.16 Version/5.0

  See http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X
  .....
  If you have Mac OS X 10.5 or newer then follow these steps:

  Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
  Trash the current demand for Firefox to do a clean reinstall.
  Install the new version you downloaded.
  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data.

• I can receive emails, but cannot send them

  I can receive emails, but cannot send them

  Sorry, but you need to ask the experts of WLMail. I have no experience with this program.
   
  Windows Live Mail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=15

• Cannot open this file because you are not allowed access to the location of the file

  I restored my compaq 510 professional vista, I get the "cannot open this file because you are not allowed access to the location of the file" whenever I tried to open a file or image

  I guess these are files from your previous installation. Take possession of them.

  A. check the permissions of the file or folder the file is saved in and appropriated:
        
  1. right click on the file or folder and then click Properties.
  2. click on the Security tab.
  3. under group or user names, click your name to see the permissions you have.

  To open a file, you must have the read permission. For more information about permissions, see what are permissions?

  http://tinyurl.com/2j9vgr

  To take ownership of a folder:

  1 right click on the folder you want to take control and then click Properties.
  2. click on the Security tab, click Advanced, and then click the owner tab.
  3. click on modify. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  4. click on the name of the person you want to give to the property.
  5. If you want this person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects to check.
  6. click OK MS - MVP - Elephant Boy computers - don't panic!

• The Sound Recorder with W7 now seems much more rudimentary than the old version, and I can't find any way to insert messages into My Documents.

  My O.S. is W.7. 32-bit.

  Before, I recently upgraded to XP and using MS Word 2007, I have a (short) Sound Clip of pre-registration<60 secs. )="" and="" then="" insert="" it="" into="" my="">

  A small icon that looks like a speaker appeared on the Document and that the beneficiary would have left click on it to hear the recording. The Sound Recorder with W7 now seems much more rudimentary than the old version, and I can't find any way to insert messages into My Documents.

  Is this even possible or has Microsoft taken a step backward here?

  I'd appreciate some help here. Thanks in advance. Mech-Tech.

  Original title: Sound Recorder

  If I've understood your problem, try this. Create a shortcut to "soundrecorder /file outputfilename.wav" (without the quotes).

  Then start soundrecorder via this shortcut and start and stop the recording, it will save so (hopefully) as a wav as before.

  I think the problem is, W7 soundrecorder, by default, saves to wma.

  If not, try a 3rd free part program such as Audacity (which seems like overkill, but should do the job).

  I hope this will help.

• When I start my computer, I get a screen that tells me the EULA has expired and I need to call the computer of the company rented to renew, however is not a rental?

  When I start my computer, I get a screen that tells me that the CONTRACT has expired and I need to call the company, that the computer can be rented to renew, however is not a rental? I have no idea what this same refers to, however, it gives me a password to enter, tells me that I have to wait 10 minutes, then it resets a chipset and allows the computer to, and then starts. I can't even take a screenshot of this message, because what it comes to control over the computer. I've scabbed virus and comes back clean. All this shows is a name of agent: HLZR4G1, then the Version 5.6.5 (Build-a-1028). The password was Wanker that seemed fishy, now the password is numbers and letters. Can someone explain this to me?

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  make it work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Hello! Has bought the photos but they have still the watermark Adobe &amp; the free also, how I can get them without the watermark?

  Hello! Has bought the photos but they have still the watermark Adobe & the free also, how I can get them without the watermark?

  Follow the steps in these screenshots: I downloaded my 10 free images and they all have the Adobe watermark on them, so I can't use them. Why do they have a watermark on them?

• Why I get this error message when I try to import? 'The following files were not imported because they could not be read. (645)"I can see them :(

  Why I get this error message when I try to import? 'The following files were not imported because they could not be read. (645)"I can see them

  Is working this morning!

  Depends on your operating system

  Go to google, try typing in

  Change the Windows permissions

  or

  Change the permissions of Mac

• temporary files take up too much memory

  a temporary file in local contexts / profile system / config / system 32 take too much memory

  a temporary file in local contexts / profile system / config / system 32 take too much memory

  Can you be more specific?  Is there a question here?

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

• Svchost.exe file LocalSystemNetworkRestricted using too much RAM

  The file svchost.exe (LocalSystemNetworkRestricted) uses too much RAM, almost 1/2 of it.  There are also several svchost.exe files (no limit) and the indexer uses a lot of RAM too. I have already associated the indexer return. I suspect that it is the cause of my favorite right-click with windows Explorer.  I have 4 GB of RAM, small basic programs, file clean constantly and the computer is still slow.  How can I fix it?  Test/scan etc. ?  HELP.............................

  2computercrazy

  Hello

  Follow the steps below and check if that helps.

  Method: Scan the System File Checker.

  http://support.Microsoft.com/kb/929833

  Method 2: I suggest you to check the boot issue.

  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved, make sure what third-party program is at the origin of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135
   
  Reset the computer to start as usual.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  When you are prompted to restart the computer, click on restart.

  Method 3:Follow the steps below to solve the problem

   1. click on start-> in start search, type "services.msc" (without the quotation marks) in the Open box and click OK.
  2. double-click on the service "Windows Update".
  3. click on the tab to open a session, please make sure that the option "Local System account" is selected and the option "Allow service to interact with desktop" is unchecked.

  4. check if this function has been activated on the hardware profile listed. If this isn't the case, please click the Enable button to enable it.
  5. click on the "Général" tab Make sure the "Startup Type" is "automatic". Then please click the button "Start" under "Status of Service" to start the service.
  6. repeat the above steps with the other service: (BITS) Background Intelligent Transfer Service

  Method 4: I suggest that you want to run a virus scan on your computer.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  I suggest you to provide us with the information from the event log.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

• 2 months Time Machine backup file has been changed recently and is not the old version of the file

  Good, then me Riddle this dear sweet people. I want to get an older copy of a file that was accidentally changed in recent days, according to me. I went to time machine and found that the file has been changed recently even if the backup of the States, she was saved 2 months ago. YGBFKM

  The reason for which the whole I support is to avoid this specific scenario. What is the backup if it is not the data from the date it was supposed to be archival?

  I would like to understand what has happened even as I and version current source of REAL backup software and ACTUALLY back up my data.

  Michael

  10.11.5 OS

  (21.5 inches, end of 2012)

  Intel Core i5 at 2.7 GHz

  8 GB 1600 MHz DDR3

  NVIDIA GeForce GT 640M 512 MB

  * bump *.

• A windows 7 computer cannot access a file share on another computer windows 7 in a home network, but others can.

  Hello

  "You don't have permission to access \\computer x\c. Please contact your network administrator to request access to ' I want to be able access all computers on my network, whether they are Windows 7 64-bit or Windows XP Pro machines.

  All computeers can access Internet and my printer.

  I'm unable to access files on one of my computers on my home network to a PC running Windows 7. The same PC can access most of the other files on the other PC. I have a mix of XP Pro and Windows 7 and they are defined as a working group not a homegroup. To complicate the isue is a laptop computer that cannot access this computer either. But the facts are that two Windows 7 PCs that appear to have identical settings cannot access both another windows 7 PC.  I guess that the unreachable PC appropriate sharing as other computers on the network can access.

  How can I change the target of the PC share permissions so I can access it from any computer on the network? Or maybe the question is from the other computers that access computer is blocking access to the setting on the PC that can't?

  All computers can view the readers there is a problem if a drive is empty, why report it: "you are not allowed..." »

  Hello

  Refer to the suggestions for the following links and check:

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-in/Windows7/networking-home-computers-running-different-versions-of-Windows

  I hope the above information helps!

• I get the message: Troubleshooting history too much room I am professional running windows. How can I fix it?

  My computer playing the odd and one of the reports trhat I get is: Troubleshooting history too much room

  How can I solve this problem

  go to the following address-

  Control Panel\All Control Panel Items\Troubleshooting

  & Click "run maintenance tasks" under system & security.

  Choose 'run as administrator' & 'apply repairs automatically' under Advanced option.

  Click next & your done... it will check for any questions & repair & will also clean history of troubleshooting.

  I hope this helps!

• I can receive emails, but cannot send them one of my email gmx accounts

  For several weeks now, I was able to receive emails but not send them one of my email gmx accounts. I have 2 gmx e-mail and accounts despite the settings are correct for both, will only send emails. I contacted gmx.fr and they confirm that the settings are correct, but the error message is very strange.

  This happens on my iPhone and the iPad, but it's ok on my iMac. I tried to delete the account and add it again

  

  You will need to go to your email account settings and enter a password for your outgoing mail server, same password entering your mail server.