23 - c010xt envy: internal speakers continue to work after plugging in the speakers external or headphones

Similar Questions

• My internal microphone no longer works after that was plugged in a mic

  Hey guys!

  I bought the HP Envy 13 spectrum (13-2113TU) earlier, and everything was smooth and functional until yesterday when I plugged it in one of these headphones with the MIC designed for phones in the 3.5 mm plug. For a second, that it did not work, but after that the external microphone worked fine. However, I find that after using the earphone, the internal microphone no longer works on Skype or any where else and it seems there is no way to test whether it is functional or not.

  In the audio Panel, there is only the stereo mix and microphone option external availible under recording devices. I checked the boxes that says see the disabled and disconnected devices but there seems to be no way to activate the interal peak. All audio drivers are up to date and nothing is cut.

  Nobody knows what is happening and what are the steps I could take to solve this problem. Thank you.

  Hi Shabab,

  I understand that your internal microphone no longer works after that a microphone is plugged into your HP Envy 13 of spectrum. If you follow this document on the microphone does not work after a webcam or a microphone USB is installed, it should solve your problem.

  http://support.HP.com/us-en/document/c01926155

  I hope this helps.

  Thank you

• Why the highlighting of text in a PDF document does not work after you save the file

  Why the highlighting of text in a PDF document does not work after you save the file

  What application you use to highlight?

• Operating system does not stop. It continues to run after I pressed the close button.

  Operating system does not stop automatically.  Computer continues to run after I pressed the close button.

  Hi Solodeseo,

  Try method listed http://support.microsoft.com/kb/308029. Hope this will help.

• print DigitalPersona finger scanning does not work after you install the recommended updates

  My impression of digitalpersona finger scanning does not work after you install the updates recommended on my dell Vista

  Hello

  1. do you have an error message?
  2. are you referring to the print scan hardware or software scan print that was supplied with the device?

  Method 1:
  I suggest you to update the software DigitalPersona from the link below https://www.digitalpersona.com/support/downloads/

• Keyboard does not work after authentication on the RDS Session host

  When you connect to the RDS through the access portal or app keyboard does not work after authentication on the RDS session host. Offline authentication works very well, past will guide you to the RDS host, then when you try to reset your password, the keyboard does not work.

  Has anyone else had that... ?

  Options (some better than others!) are:

  1. move all MS applications seamless

  2. have an application named "Reset your password" (or similar) which uses MS Seamless.then you can leave other applications, as they are

  3 disable authentication carried forward and implemented our service reset password instead so people reset their password before can connect you.

  4. use the full desktop instead of transparent

• having problems become my printer to work after you download the compatible driver loading. Also I can't open a Web site from a link

  2 problems

  1. always problems to get my printer to work after you download the compatible driver loading.  I have a HP7660 and was instructed to use a driver for HP 5600.  Printer still does not print.
  2. when I go on a website of my e-mail address, Web site opens, but if I click on a link in this site open, the connection is not open.
  Any suggestion would be appreciated.  Thank you

  In regard to # 2 have a look here.
  For hyperlinks doesn't work does not (usually in email)

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;310049

  The printer will print even a test page? Have you tried that?

  HP Print doctor for help with many printing problems

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c02073861&JumpID=ex_r4155/HHO/IPG/ccdoc/trailhead_doc&lang=en

  I hope this helps.

• Windows 7 - sound through the internal speakers but not headphones...

  I've upgraded to Windows 7 and got the latest Realtek HD Audio driver, and the internal speakers work fine. Nothing is coming through the headphones well. In the Audio Device Manager, it lists the headphones as "Realtek Digital Output" and seems to work, but there is no sound. Before I could just plug my headphones and it would turn off the speakers and only use the headphones. Help! Any ideas?

  Hello jrh388,

  To better help, what is the brand and model of your PC?

  You can check if the headphones are activated as a playback device. To do this, see the following steps:

  ·  The Pearl-click Start and type Sound in the start search box.

  ·  Select card change settings in the Start Menu Options.

  ·  Then, on the Read tab, right-click and select Show hidden devices and Show disconnected devices if they are available.

  · Select headset and select

  You can also view the following link for more information about advice for solving common audio problems:

  Solutions to solve common audio problems

  Please let us know if the steps to solve the problem for you or if you need assistance.

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• my headphones (or headsets) does more work when plugged into the audio input jack

  I have a 2010 27-in. iMAC.   I am running Yosemite 10.10.5.   Recently I can't get audio on the audio jack that I always used with my helmet.  Have tried the other sons of contact as well as the apple earbuds.  Audio is great internal speakers.

  When you plug your earphones sound still come through the internal speakers?

  When you plug in your headphones, you see those as an option in preferences-> sound-> release system?

• The closed display mode is no longer works after update of the Sierra on my MBPro. Known bug?

  I use a vertical dock for awhile, so my MBPro retina works in closed with external display, KB and mouse display mode.

  But since I installed the update of the Sierra, the external display not Mac OS desktop.

  It only works when I open the built-in screen...

  The bug is known? Or y at - it a setting to adjust on the Sierra?

  Thank you in advance

  Hi darklemon,

  I understand that, since the update to Mac OS Sierra, you've been unable to use your MacBook Pro in closed view. I know it's important to use your computer in a way that suits you, then I'm happy to help you.

  Let's start by resetting your memory NVRAM and SMC which can often help with system display and related issues:

  How to reset the NVRAM on your Mac - Apple Support
  Reset the management system (SCM) controller on your Mac - Apple Support

  Once you have done this, follow the steps here to set up the closed display mode:

  Use your Mac laptop to view closed with an external display - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• USB does not work after you install the utility on Satellite A200 Intel chipsets

  Hello.
  I installed Win XP Pro SP2 on my Satellite A200-1SM and everything was ok until I installed Intel Chipset Software Installation Utility version 8.2.0.1014 (recent ones on the site of download of Toshiba; before this step all USB dev. worked properly), after all my USB devices wouldn't work. I had my windows up-to-date with updates from Microsoft, but that has not changed a thing.

  I use Vista once again, but still want to work one day at the XP operating system.

  Please help me if you can.

  Like the previous user said, the chipset must be installed as first pilot
  In addition, it seems that this laptop supports the Intel® GM965 + ICH8M Intel chip.
  It would be advisable to check the version of the Intel page directly

  Hey Buddy

• HP Notebook: Wifi and Audio does not work after update of the 10 victory

  I updated the OS to win 8.1 to 10 and it was somthly, but after this recent update to win 10 all at once the wifi has ceased to recognize all the networks around it... also the audio has stopped working. I tried the two troubleshooting and found the audio starts to work after you troubleshoot but wifi does not work. This happens everytime I turn on my laptop, and whenever I have to solve an audio driver to fix it but the wifi doesn't work every time... Please help... I also tried to update the drivers of these two, but he said that the drivers are updated every time... Please let me know if anyone can guide me through this problem...

  Hey @Riken_HP,

  Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

  I understand that you are having problems with the wifi on your HP laptop. I'd be happy to help you.

  What is the exact model of your laptop? If you do not know who will find it here: http://support.hp.com/us-en/drivers

  The following pages are useful for troubleshooting wireless connectivity problems.
  Troubleshooting wireless network and Internet (Windows 10)

  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget a network (Windows 10)
  Forget wireless network profiles in Windows 10

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the Winsock Catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Not call explanation. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

  Please hold me.

  By pressing the Thumbs Up button below, you can always say thank you!

  See you soon.

• Internet Explorer does not work after you install the kb2761451 update

  Original title: I downloaded the update and now Internet security security update kb2761451 explore does not open.  So I deleted it and Explorer opens.  This update is listed as important.  What should I do?

  The Explorer is 9.

  Hello

  Thanks for posting the question in the Microsoft Community!

  Internet Explorer stops working after the update kb2761451 is installed.

  The problem may occur if the updated components are corrupted.

  I suggest you follow the steps mentioned below:

  Method 1: Of reset Windows Update components

   

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: run the Update of the system analysis tool

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Blue Screen of Death and stop working after plugging my Razer Kraken Chroma 7.1 (windows 7)

  (Which mean that I speak French, sorry for my English)

  Hi, I have a problem. When I plug my headphones Razer Kraken 7.1 Chroma, awhile, they just stop working. I heard a noise and that they stop working. I must unplug and plug my headphones so I want them to work again. And this thing is happening very randomly! As for 5 minutes, I have déplug and reconnect but some times, it's job for 20 minutes without problem.

  Also, I feel that if I plug my headphones too fast after this problem, the blue screen of death appear.

  I uninstall and reinstall a lot of time, but don't change anything.

  I have 2 computer: this problems happens on my computer which has windows 7, but when I'm on my pc which has windows 10 all work.

  So thanks to you. Sorry for my English ^^

  Logitech Inc QuickCam LVcKap64.sys associates.  Yours is from 2007.  I would completely remove the software and install a new copy of the most recent driver available.

• Camera does not work after you reduce the screen brightness

  Hello

  I have an application that uses the camera in QML. It works fine, but if the screen fades while my application is open the camera no longer until I restart the application.

  Here is the page of qml any camera:

  import bb.cascades 1.0
  import bb.cascades.multimedia 1.0
  
  /**
   * Most of this code was copied from:
   * https://developer.blackberry.com/cascades/documentation/design/camera/taking_a_photo_with_the_front_...
   */
  
  Page {
      property string pictureLocation: ""
      function closeCamera() {
          createReportNavigationPane.cameraClosed(pictureLocation)
          pictureLocation = "";
          saveID.enabled = false;
          sheetCamera.close();
      }
      titleBar: TitleBar {
          acceptAction: ActionItem {
              title: qsTr("Save")
              id: saveID
              enabled: false
              //title: "Save"
              onTriggered: {
                  closeCamera();
              }
          }
  
          // The 'Cancel' action
          dismissAction: ActionItem {
              title: "Cancel"
              onTriggered: {
                  pictureLocation = "";
                  closeCamera();
              }
          }
      }
      onCreationCompleted: {
          // Check to see if any cameras are currently accessible.
          if (camera.allCamerasAccessible) {
              // Open the rear camera.
              camera.open(CameraUnit.Rear);
              camera.isOpen = true
          }
      }
      Container {
          layout: DockLayout {
          }
  
          // The Camera object.
          Camera {
              id: camera
              preferredWidth: 768
              preferredHeight: 1280
              objectName: "camera"
              property bool photoBeingTaken
              property bool isOpen: false
              onTouch: {
                  if (event.isDown()) {
                      if (photoBeingTaken == false) {
  
                          // Take a photo, and automatically
                          // save it to the file system.
                          camera.capturePhoto();
                      }
                  }
              }
  
              // The following are examples of slots that can
              // be used with the Camera object to handle
              // the various signals that are emitted.
              onCameraOpened: {
                  // Once the camera is open, start the viewfinder.
                  camera.startViewfinder();
              }
              onCameraOpenFailed: {
                  console.debug("Camera cannot open");
              }
              onViewfinderStarted: {
                  console.debug("Viewfinder has been started");
                  photoBeingTaken = false;
              }
              onViewfinderStartFailed: {
                  console.debug("Viewfinder could not be started");
              }
              onPhotoCaptureFailed: {
                  console.debug("Photo could not be taken");
                  photoBeingTaken = false;
              }
              onPhotoSaveFailed: {
                  console.debug("Photo could not be saved");
                  photoBeingTaken = false;
              }
              onPhotoSaved: {
                  saveID.enabled = true;
                  photoBeingTaken = true;
                  console.debug("Photo has been successfully saved");
                  photoBeingTaken = false;
                  console.log(fileName);
                  pictureLocation = fileName;
                  var imageName = pictureLocation.substring(pictureLocation.lastIndexOf("/") + 1);
                  var imagePath = "/accounts/1000/shared/camera/" + imageName;
                  cameraPreview.imageSource = app.getCameraPreview(imageName, imagePath);
              }
          }
          Container {
              layout: StackLayout {
              }
              leftPadding: 10.0
              topPadding: 10.0
              Container {
                  preferredHeight: 200
                  preferredWidth: 200
                  horizontalAlignment: HorizontalAlignment.Left
                  Container {
                      verticalAlignment: VerticalAlignment.Center
                      ImageView {
                          id: cameraPreview
                          verticalAlignment: VerticalAlignment.Fill
                          horizontalAlignment: HorizontalAlignment.Fill
                          scalingMethod: ScalingMethod.Fill
                      }
                  }
              }
          }
      }
  }
  

  Thank you

  Gerry

  so, there is a signal of cameraResourceReleased which you can listen to that will tell you that the camera has been arrested.

  After that, you can restart the viewfinder after your application is in the foreground.

  We have a corner case that we are still working on what centers around the case when the screen starts to close (causing the camera to stop), but the user he wakes up before the browser tells your application in the background.  In this case, you may not receive a leading event.  You can probably work around this case by launching a timer and check, after a second or two, if the application has been deleted original or not... If it is still in the foreground, then you could try restart the viewfinder

  See you soon,.

  Sean