What is the effective resolution of the Council Usb6361 ADC

Similar Questions

• Portege M200 with external monitor - what is the best resolution?

  As a result of a recent post on using an external monitor with the M400, I have a question on the use of one with the M200. I realize that the M200 uses the graphics card Nvidia rather than the graphics card Intel in the M400 - is it better with regard to the use of an external display is concerned? The M200 manual says that it will support up to 1600 x 1536 resolution on an external display. I want to use my M200 in a docking station with an external monitor to the extended desktop.

  What would be the best resolution to go with externally? Should I go for 1400 x 1050 screen LCD M200 match? Or could I go for a 1600 x 1200, that should the graphics card (!) be able to cope? Or, finally, if I went to a widescreen 1680 x 1050, how would the face Nvidia card? The screen is not as clear as with the 1600 x 1050 screen?

  What are the chances of work at all? I see in the M400 manual which she is supposed to support 2048 x 1536 on an external monitor, but this seems to be a problem, judging from the other post.

  Any help appreciated - thanks

  Hello

  Well, the resolution of the screen depends primarily on the graphics card.
  If you want to use a display resolution that the graphics card must support. In addition, the graphics card driver is important. If the graphics card will support the resolution of the screen, BUT the resolution is not listed in the graphics driver, so you will not be able to choose this value.

  To my knowledge, if you use the docking station you will get Supportepar as the notebook display resolutions.
  The resolution of the external display also depends on the external display. If the material of the monitor will not support the resolution so you will not be able to get all the images on the external monitor.

  I think the best way is to test that the resolution is the best. Some people prefer the high resolution of small icons and other blind ;) like low resolutions (1024 x 768) because of the large icons

• What are the effects of the clearing the browser Cache?

  What are the effects of the clearing the browser Cache?

  Caches to store a copy of the page Web that you visit to speed up the loading of the page even when you revisit the page.

  Once you empty the Caches, pages must be again downloaded from Web sites.

  With higher bandwidth available now, is not a problem.

  Sometimes these caches can get damaged and a troubleshooting step

  You can clear those without causing any problems.

• "Pavilion x 360 2-in-1 13.3": what is the resolution of the screen on a x 360 Pavilion 2-in-1 13.3 "touchscreen

  What is the resolution of the screen on a Pavilion x 360 screen 13.3 "tactile-2-in-1

  Hello

  If your question is generic and that you do not have the device but then these models have HD resolution then 13.3 "1366 x 768 HD. It is available in each specification on the web of particular model.

• Different screen resolutions - what is the best method?

  Hello

  I know that this question was asked a thousand times before, but what is the best way and the most reliable to deal with different screen resolutions?

  I read a lot of posts about it and tested on everything: unique, methods, combinations, let labview scale my objects, their scale by myself, etc. Another alternative that I found was to design the front panel to the lower screen resolution, let labview scale objects (graphics, controls tab and decorations) as window increases or decreases and lock "groups of indicators, controls and text" to prevent them from scaling and overlap. However, if I lock these "groups" that they don't move in the right place in the resizing of the window. Then, I put these 'groups' within groups and tried to compensate for the position via the property node, but it was not possible because the 'groups' within the cluster have been locked!

  After all these tests, I realized that the best way to manage different screen resolutions must have a main VI that detects the current screen resolution and load the good VI for this resolution. The problem is that I have a VI for each screen resolution (created one by one) and if I want to move the code I have to do the same task for all the screws

  Since I already have all the screws (for different screen resolutions), I could get the sizes and positions of all the objects through property nodes and create a kind of 'cluster' which, after the detection of the current screen resolution, would be to adjust all the objects. But I have several decorations in the front panel and I can not get information via the node property of them.

  THW way you can prevent the control to move when you're scaling, is to group the controls with 'something' which is placed outside the façade. In the example I give you now, you can see that I have grouped the stop button and the 'red faces' with a 'point' on the left side of the front panel.

• What is the resolution for USB-6210 for positive ranges of entry?

  Hello

  I use USB-6210 to sample different types of sensors and each has its own range of values. I have two questions:

  (a) what are the fixed beaches of USB-6210 where most suitable is chosen automatically depending on the settings of user intput scope? They are to +/-0.2, +/-1, +/-5 and + /-10?

  (b) I know that if I select + / 10 as the range and then I will get the resoultion of 20 /(2^16), but what happens if I want to the positive range only? So if my sensor gives values between [0.10] and data acquisition would choose the + / 10 range. Then could get a resolution higher than 20 /(2^16) and how?

  Thank you.

  (a) Yes, they are the ranges listed in the manual

  (b) No, a fixed range means a fixed range. You cannot change them.

• What is the resolution of the photos taken on the PowerShot Elph 115 IS

  New user.  Tech challenged.  What is the resolution of the photos taken on the PowerShot Elph 115 IS?

  The camera doesn't shoot in PPP: it draws pixels & pictures will be X pixels wide by pixels X maximum. The printers use DPI & you should be 300 DPI or more for high-quality printing. Some software opens your photos & shows how great a feel you could do at 72 DPI, but who is just something built in the program & no has no real meaning, unless you plan to make a wall poster. It's unimportant info 99.9%of time.

• "Do not put the laptop near devices such as TV speakers/fridge that generates a strong magnetic field" what is the effect of this?

  Original title: do not put the laptopn close device suas: a fridge that generates a strong magnetic field of the speakers on the TV? What is the effect of the magnetic field, causing the laptop?

  Do not put the laptopn close device suas: a fridge that generates a strong magnetic field of the speakers on the TV? What is the effect of the magnetic field, causing the laptop?

  Hi stuckfree,

  Magnets are used in computers for various purposes, for example in the hard drives. Several parts of a laptop computer may be affected by a magnet. More commonly known as material element affected by magnets is the hard drive.

  That is not exactly true. Hard drives are well protected against most of magnetism, and most even use a magnet to turn, but many strong magnets and electromagnets can and will damage a hard drive. More likely to be affected is the BIOS of your computer (Input\Output base system) ROM, which shows how to use the basic components and boot into the operating system to your motherboard.

  So it's best to avoid placing computers\laptops close to all these devices.

• What is the cause of resolution color Vista reset 32-bit?

  In Windows Vista, I set the color resolution (in Control Panel) in the middle of 16-bit (from the highest 32-bit).

  I have two photo editing programs that only work with 16-bit resolution. Programs probably date from prior to Windows Vista.

  However, next time I re - start the laptop (a Sony VAIO), the resolution is reset to the 32 bit setting soon after starting.

  I tried to disable the Aero de Windows theme. However, after a reboot, the 16-bit resolution was still resets to
  the 32-bit parameter.

  What is the reason for the resolution of the color to change it back and how one does not this product?

  Reinstall the video card driver and set the resolution of the screen.

• What is the maximum screen resolution for a 201 X (t) via X 200 ban & Displayport?

  Since the X 201 (t) has such a small screen (when will we finally see tablets with 1400 x 1050 screen resolutions or even 1600 x 1200?) Manufacturers - wake up!) I plan to buy a large external screen.

  But what is the maximum that a 201 X (t) can lead by the Displayport 200 X of the ban? I couldn't find any reliable information on that and the installation program does not say, as long as there is no such screen attached.

  I read somewhere that it is capable of 2560 x 1440 pixels. Sounds great, but I have some doubts, that it is indeed the case. Could someone using such a screen please confirm that? I don't want to buy me such a screen high resolution just to watch some blury, set on the scale of resolution 1600 x 1200 (or other). Integrated graphics is actually capable of managing this resolution and this resolution will then be just unbearably slow?

  Michael

  the displayport can lead a monitor 30 inches of WQXGA (2560 x 1600) resolution in its native resolution using either the displayport or if you use an active displayport to dvi converter dual link.

  If you are not running any games or other graphics intensive programs, the X20x can drive the resolution max is very good.

• What is the effect of the evolution of the number of 20000 to 200 in the waittokillservice registry key?

  in regedit, what is the effect of changing the number of 20000 to 200 in the waittokillservice?

  Original title: regedit

  Hello AnuModi,

  The time taken by the process to be killed, i.e. stop Windows, is reduced from 2000 to 200 milliseconds Ms. This should allow the service to be closed more quickly. The end result is a slightly shorted stop time when you exit Windows.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• What is the maximum resolution of X 300 graphics card?

  Hi, I would buy an external monitor and connect directly via the VGA. What is the highest resolution of Intel GS965 (working with an external display)? TIA best regards, Krecony

  2048x1536@75Hz

• What is the best graphic card for after effect

  Hello
  my graphics card is not supported for after effect. I'll buy a new one and I would like to know what is the best
  Thank you

  There is never a simple answer for such a question, but:
  List of cards supported for 3D Ray Tracing in AE, you will find it here: after effects configuration required for Mac OS and Windows

  More information on NVidia: Adobe after effects CC - 3D Graphics workflow | NVIDIA

  But to be honest, most of the nvidia graphics cards will work with AE - ELA easier - more Cuda cores better.
  But before you spend a lot of money for the high GPU know AE uses mainly from CPU to GPU rendering is not so important. It uses the GPU only for RayTracing (obsolete)

  and some third-party plug-ins.

• Fusion HCM createWorker (WebService) what is the format of the Effective Date of start?

  Hi people
  I use Fusion HCM WorkerServices exposed through web services and trying to add a worker and get the error (by Java Exception) HRC-HRC_DE_SRV_ESD_EED_NOT_SET. I understand that Fusion HCM webservice could a wrapper around PeopleSoft (I could be wrong), among other things, and Googling shows me how to set the date in PeopleSoft or its implementation.
  
  I would like to ask what is the format by default for the effective date of commencement and end be set via Webserice.  I tried different formats but without success.

  
  

  I use WorkerService. Worker, Version 2
  
  Any pointer, help would be greatly appreciated.

  
  

  Concerning

  
  

  
  

  A quick update, I've been able to resolve this error. The error was misleading and I couldn't find any documentation on this topic, if there was any. The work object (HCM Fusion SOAP webservice, 11.1.x) have another attribute that are mandatory (worker type, code of laws, etc.). Actual start/end date was not yet mandatory.

  Concerning

• What is the name of this effect?

  What is the name of the effect of the vibrations of red-green in this video? Fall Out Boy - centuries (Hyperlapse edition) - YouTube

  How can I create it like this?

  Make two copies of your video. On the top layer add juggler channel. Use the background copy as the "second layer" then do something to the background layer to make slightly different images. Time shift or add a distorting effect. You get something like this: