Cannot send messages from desktop (Windows Vista) with wire for modem or laptop (Windows 10) wireless, but can read the new email (Thunderbird) on both computers.

Similar Questions

• Cannot read the OS DVD, but can read the Diag CD sata disc?

  Greetings,

  Laptop is the famous brick of overheating creatively titled DV6416CA.

  I had to format the new hard drive after the original hard drive fried. (HP says too bad with that in short).

  It now sports a WD3200BVET which is sata 5400 320gigs. I had installed Windows 7 during about 6 months now.

  It was great. Life was good. I was happy. My daughter, wife and mother-in-law all used to watch movies online.

  Then they got a virus that has rendered useless map of wireless network and in the end, I was told by 2 different specialists to give up and reinstall. So I said OK. I'll reinstall with the same dvd that I used last time. But it was not to be.

  Somehow, I can read the diag cd I have but when I insert a dvd of Vista (a real one) it will not read it. He tries, but giving up at the end I tried the DVD (the original one) and also one dvd of Windows 7 on 2 other workstation without problem.

  Therefore, I can not install the OS from scratch on this laptop using the DVD player.

  The BIOS is also sport all options, for example, the IDE compatibility or such.

  Just the phone does not have a DVD OS...

  Thanks for the help

  Antoine

  PS: with 3 generations of angry women, waiting for this I need all the help I can get! LOLz

  Perhaps because it is the laser burnt out or defective DVD it reads cd but not dvd. Have you tried to boot from XP cd?

  You could try a 4 GB USB Flash drive to create a W7 bootable Installer.

  http://AgniPulse.com/2009/11/Windows-7-32-bit-and-64-bit-direct-download-links/

  http://freetechjournal.com/tech-space/Microsoft-Windows-7-bootable-USB-creator.html

  http://windows7usbcreator.com/

• Cannot send messages, either through Windows Live Mail. Same problem as others have.

  I could send messages through Windows Live Mail until I downloaded the optional updates for Windows 7.  I'm not saying that is / it was the culprit, because I restored my system to an earlier time (before downloading the update) and still had the same problem.  I tried to install Windows Live Mail on another computer and have the same problems.  I'm not as computer warned as others, so any help would need to be relatively simple to follow.

  Click once on the work online on the status bar so that it turns into working in offline mode, and then remove all messages not sent from the Outbox.

  Right-click on the account name in the folders pane, and then select Properties. On the servers tab, make sure that my server requires authentication is selected, and then click Advanced tab change the port to 587 outbound mail server.

  Compose a new message of test with a single topic and send it to yourself. Post a new message in your response.

• Cannot send messages from the Outbox

  When I try to send I get a message "some problems occurred" I can receive messages O.K.     it the last time I was able to send messages it the duplicated.

  You have apparent dbx file corruption.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, the files of user OE (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• Cannot print through USB on Windows 8 router, but can through windows 7 and Vista

  Problem:

  I have a printer that works for both computers windows 7 and vista.  I have two computers windows 8 that do not work.
  Material:
  laptop Toshiba P50 brand new.
  Router Asus RT - N16 rooted with the TomatoUSB firmware.
  Printer/scanner color Samsung CLX-3180.
  Symptoms:
  I can get the printer to operate if connected directly via USB.  The new Samsung universal of the generic drivers work.
  Even the driver connected via TCP/IP causes the printer to beep and the power wheels to run but nothing comes out.  It looks like windows and the printer think print things.
  What I've tried so far:
  Uninstalled all printer drivers and ports.  Then reinstalled with fresh downloaded drivers.  I had to erase the registry because pilots and port were considered to be in use.
  I have disabled the firewall without result.

  I fixed it finally I think.

  Here's what I did.
  -Deleted all drivers in the system.  (1) remove the 2 devices) remove the driver through "(propriétés dele de serveur d'impression 3) delete all created ports through"the print server properties""
  -Download the new drivers. type 64-bit
  -printer installed using Samsung universal driver 2 and player USB connection as required by the manufacture.
  -installed the TCP/IP port using the TomatoUSB facility and former driver of windows 7.  (wrong system to not check to see if the printer is online)  The pilot was CLX-3180
  -Changed the driver properties Advanced printer to "Sansung Universal Driver 2" tab
  -Change of printer model for Samsung CLX-3180 in the printer - Options tab of the device properties.
  -L' printer select clicked the button when changing the port.  Don't know what it does.

• Cannot send messages from reception - 5102 0x8DE20003 error Server error code

  Can't send or receive messages for the... account.

  Server error: 5102
  Server: 'https://mail.services.live.com/DeltaSync_v2.0.0/Sync.aspx '.
  Windows Live Mail error ID: 0x8DE20003

  Impossible to repair.  I don't have how to solve this problem.

  Help

  Windows Live Mail is supported in this forum
  http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail?tab=all

• Error 0x800CCC0E while sending messages from Windows Live Mail

  Programs Application Applications Apps game games Legacy Crash crashes Hang Application Compatibility hangs

  I get messages in my Inbox, but cannot send messages through my Outbox.

  This is the message that appears:

  The connection to the server has failed. Server: 'smtp.comcast.net '.
  Windows Live Mail error ID: 0x800CCC0E
  Protocol: SMTP
  Port: 995
  Secure (SSL): No.
  Socket error: 10060

  995 Port SMTP is not the right port. Change the SMTP port to 587 and ensure that: my server requires authentication is enabled.

  How can I set up/configure Outlook Express, Windows Mail & Windows Live Mail to E-mail from Comcast?
  http://www.Comcast.com/customers/FAQ/FaqDetails.ashx?ID=2288

  http://customer.Comcast.com/pages/FAQViewer.aspx?GUID=5be34cb1-B190-4FC1-BEAA-818778a54aed

• How can I send sms text message from my Windows 7Pro PC to any mobile phone?

  SMS from the mobile phone PCto

  How can I send sms text message from my Windows 7Pro PC to any mobile phone

  By electronic mail.  Exact address depends on the carrier.

• For some reason, I can't send messages from outlook express.

  for some reason, I can't send messages from outlook express, think he was with my trying to send a facebook e-mail that was much too long

  for some reason, I can't send messages from outlook express, think he was with my trying to send a facebook e-mail that was much too long

  
  You don't offer a lot of information and a new thread of your own would have been better than locking it.
   
  Do you have an error message when you try to send? If so, post it. If this is not the case, make sure that there are no messages in the Outbox.
   
  If there is, check: file | Work offline and in: reviews | Layout: uncheck the preview pane. You can remove them now?
   
  If this isn't the case, create a new Outbox.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, 2K & 2K 3, files from user OE (DBX and WAB) are by default marked as hidden. To view these files in the Solution Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.
   
  With OE closed, find the DBX the Outbox.dbx file and delete it. A new vacuum will be created automatically when you open OE.

• Cannot receive messages from a live account

  Cannot receive messages from my live account! Sever error 4102? Any advice?

  See this thread:

  Windows Live Mail error ID 0x8DE00001
  http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail-email/Windows-Live-Mail-error-ID-0x8de00001/bcb3b6ef-3148-4137-A85A-b4da5d999575

  You can ask questions on this forum.

• Your message has not been sent because there is a daily limit of message. Unable to send messages from this account until tomorrow, or what this account is checked.

  Your message has not been sent because there is a daily limit of message. Unable to send messages from this account until tomorrow, or what this account is checked.

  Object 'of family trust of Smart Fortunes - Lucespace"
  Server error: 3210
  Windows Live Mail error ID: 0x8DE00006

  How to check my account to allow me to send emails, because these are payroll cards and I need to send them the same day?

  Concerning

  Susan Dooley

  Contact Lucespace.

• Is it possible that I can get the new drive with Windows 7 activation of work without having one installed beside it?

  Hi, I bought a PC with Windows 7 pre-installed, refurbished but the case has a product key for Windows 2000, because he's company ex machine that has been upgraded. I installed a new hard drive and to keep my files, I copied all of the old disk to the new including the operating system. It worked well for a while, but I'm now getting the message "this copy of windows is not genuine". I found the product key of the old drive, but when I enter it on the new one it always says that it is not authentic. Is it possible that I can get the new drive to work without the one installed beside it?

  Original title: activate windows 7

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) to select your "country" you are in the drop-down list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  What's the relationship between activation and genuine Windows?
  http://Windows.Microsoft.com/en-in/Windows7/what-s-the-relationship-between-activation-and-genuine-Windows

  What is the validation, and how does it work?
  Windows 7: http://windows.microsoft.com/en-us/windows/help/genuine/what-is-validation?os=win7
  Vista: http://windows.microsoft.com/en-us/windows/help/genuine/what-is-validation?os=winvista

  Authentic Microsoft software program privacy statement
  What data is collected?
  http://Windows.Microsoft.com/en-us/Windows/genuine/privacy-statement

  - Product key numbers and letters .

  Not confused the letter B with the number 8, the letter Q with the letter O.
  the letter G and the number 6.

  A, E, I, O and u are not used.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Worldwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• I have a computer that has Windows 2000 Pro, I can use the disk to upgrade to Windows XP with this OS?

  I have a computer that has Windows 2000 Pro, I can use the disk to upgrade to Windows XP with this OS? It's

  an old computer, but it works very well.  I want to switch to XP using the Windows upgrade disc. But

  in the specifications it lists only 98, 98 Second and ME as an operating system you can upgrade.  Thanks John

  Provided the specifications of the computer meets Windows XP you can switch from 2000 to XP. If it does not meet the specifications, you may upgrade the computer first or get a new one which is more cheaper today.

  In addition, please note that you can only switch to Windows XP Professional. If it is a home edition you have then it will not work. You can refer to the link below on how to update your copy of Windows 2000 to Windows XP Pro.

  http://support.Microsoft.com/kb/978307

• Windows CD got currpted can I get new CD from Microsoft

  Hi all

  When I bought the laptop, Dell gave me a CD with which I can formate my PC. Now that CD is currepted, I am not able of the formate PC with this CD.

  Is there anyway I can get the new CD from Microsoft, can someone help me in this case...

  BR,

  Mohan

  No, you can not get such a CD of Microsoft, but there is a good chance that you can get one from Dell:

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/en/backupcd_form?c=us&CS=19&l=en&s=DHS&redirect=1

  http://www1.euro.Dell.com/content/topics/topic.aspx/EMEA/contact/enuk?c=UK&l=en&CS=ukdhs1

• I have an OEM of Windows Vista version on a dying computer. Can I buy the upgrade for Windows 8 and install it on the new PC, I'm building?

  I have an OEM of Windows Vista version on a dying computer. Can I buy the upgrade for Windows 8 and install it on the new PC, I'm building? The upgrade, is published at the same time as I'm rebuilding my PC. I'm just looking to replace my OS. I need Vista.

  Hello

  OEM license is tied to the first machine that is installed on the OEM license dies when this machine dies.

  An OEM license is not transferable.

  And you need a legal edition of Windows, enabled for upgrade.

  There is no use, you buy a license upgrade of Windows 8 by itself as you have to upgrade anything of in the new computer, you build...

  You can buy a license of Windows 8 when it comes out later this year.

  See you soon.