Cannot set a checkbox control to required ("registered user - required")

It seems there is no "required" checkboxes to define in my LiveCycle form. Tab object/value only gives me the option "User entered" (in addition to 'Calculated', ' protected', etc.).

Is this always the case? This has to do with Javascript?

Thanks for the reply. What I realized later, is that I need the form to check if one of the two boxes is marked before clicking a Submit button in a section that comes later. So I don't want the shape to make the required checkboxes because the first user does not need to check out them. So I put that in the script for the Send button:

If (CheckBox1.rawValue == 0 & CheckBox1.rawValue == 0)

{

xfa.host.messageBox ("Please select approved or not approved before clicking on Submit!");

}

Tags: Adobe LiveCycle

Similar Questions

When I try to set up Parental controls on a standard user account a message comes up saying unable to Im. Is there a way to fix this?

The exact words that the message says: when it comes to the top is: "unable to make changes to parental controls settings. If this problem persists, see your system administrator. " Is not supposed to because I was on an administrator account when it came. Is there a way to fix this?

Hello

1. you have installed on the machine by chance Microsoft family safety?

You can refer to the suggestion of ken in this link: http://answers.microsoft.com/en-us/windows/forum/windows_vista-security/parental-controls-error-unable-to-make-changes-to/70d3c356-eb55-4e93-98a0-b5f96ac44eea

How to set up an andpasswords of names registered user

is there something I need to do to save usernames and passwords?

That's not what I meant > I've always been able to say Yes when I went to a website and IE should arrive "asking if I wanted to IE to remember the username for this site.

It is now clear that your question relates to IE. A forum IE would be a much better place to post your query.

Error: The installer cannot set Windows XP required configuration information during the upgrade to Windows XP Home SP3 of Windows XP Pro.

Original title: OEM Windows XP Home SP3 update XP Pro

Here is a compilation of the messages from another forum regarding
My problem:
---------------------------------------------------------------

I'm trying to upgrade a Windows XP Home Sp3 OEM system to
Windows XP Pro. (There are a few Pro features
that are not available in the House I now need: (1) the files offline and
(2) an add-on available for free to Onenote 2007, Top2onenote, requires a Pro).
I don't want a clean install, but an upgrade. I bought a Windows XP Pro
Upgrade CD on Ebay that was Windows XP Pro
Gold (v2002). I'm sure that's true for the following reasons:

It has been listed as an upgrade, but the CD is not labeled "Upgrade".
It seems very authentic with all Microsoft holography.
He came in the standard package of Windows XP (without box),
and it was sealed.
The name of volume for the CD is WXPFPP_EN. The Internet,.
It is the retail of Windows XP Pro RTM (gold)!

Here are things I tried initially.

(1) I tried to upgrade to Pro from the purchased CD. It is immediately
has refused to upgrade indicating the upgrade OS (Pro) is older than the
installed OS (home)...

(2) I read about "slipstreaming". "Slipstreaming" allows to integrate
a service pack with an earlier version of the operating system. I created a
upgrade XP Pro SP3 with Nlite slipstreamed CD image (and
Autostreamer later, but it made no difference) from the purchased CD
and a file containing SP3.

After you burn the CD and start the upgrade
(Windows installation), the upgrade process
product through "information collection."
"Dynamic update" and "Preparation of Installation" with
no problems. My computer restarted and returned to
"Installation preparation". A progress bar called 'Progress '.
quickly filled to about 90% and the hanging system
at that time there for about 15 minutes.
Then, I got the following error message:

Setup cannot set the required Windows XP configuration
information. This indicates an internal Setup error.

This is where I am stuck. I had to leave the installation at this point.
My drive is starts raining and I had to restore a backup.

(3) just for the heck of it, I formatted my hard drive and
reinstalled my original OEM XP Home SP3 OS (no clean up, no user file).
I immediately used my XP CD slipstreamed Pro to try one
upgrade to XP Pro and IT WORKED! I need to find out why the
properly clean XP Home OS upgraded to XP Pro but my pre-existing
(with the files users, drivers, etc..) XP Home OS does not level
successfully to XP Pro.
-------------------------------------------------------------

Another post:

Yet once, today, I installed a new copy of OEM Windows XP Home Sp3.
I continue with installation of all the essential and the add-on
pilots (essentially all my original version). Then, I
set up a network connection and firewall. With this configuration,.
I ran the Pro XP slipstreamed SP3 CD. The upgrade to XP Pro
success (even if the upgrade not configured my graphics
card properly). I guess my current problem is either the registry,
the WINDOWS, some user file or parameter file.
---------------------------------------------------------------

Another post:

I made a file and the backup of the folder C:\Windows folder
on my system that is pre-existing (OEM XP Home Sp3). I also did a
separate the backup the State of the 'system' on my pre-existing system.
These are added my full image backup of her pre-existing
system a month ago.

I did a backup image of my system (minimum fees OEM XP Home
SP3 with all the original installed drivers over a network configured
connection and a firewall configured). This system will upgrade
XP Pro with XP Pro SP3 slipstreamed CD successfully.

Experiment 1:

I've restored my minimum system. I then restored the C:/Windows folder
and the State of the pre-existing system backup system. A startup
has managed (with a minor irritant). I had to activate Windows.
Then, I tried upgrading the slipstreamed XP Pro processor. He stopped
at the same place during the upgrade and gave the same error as before:

Setup cannot set the required configuration information Windows XP.
This indicates an internal Setup error.

Experiment 2:

I've restored my minimum system. I then restored the system state only
the backup of the pre-existing system. After startup I was asked to
activate Windows, but answer Yes to the question would be to disconnect me
the system. I couldn't get connected to try the XP Pro upgrade.

Experience 3:

I've restored my minimum system. I then restored only the C:/Windows
the backup of the pre-existing system folder. Once again, as in experiment 1,
the upgrade failed at the same place with the same error message.

----------------------------------------------------------------

Before the experiment 3, I hoped that 3 experience would succeed so I
could conclude that I had a registry problem. I'm not sure now.
I don't know what to try next. Take the minimum system and reinstalling
my files of the user is not an option that my hard drive has over 200 GB of
programs! If I restore all files and folders of my pre-existing
I would still have backup to restore a system state the reliable (read the registry).
---------------------------------------------------------------------

Sorry for the length! If anyone has any ideas I would appreciate your responses.

Thank you

Hello

This problem can occur if a piece of hardware that is installed on your computer is not compatible with Windows XP.

For more information, see this link:

Error message: Setup cannot set the required Windows XP Configuration information

Hope the helps of information.

"Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ". After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

Ron, I have something for you!

and for all the people who have this problem :)

Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels. Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

My TV works and looks okay now.

It actually works!

the only problem is that it is not in HD

but there is something

Hotmail 44 looks like your mother has not finished to set up parental controls for your account settings.

I had a few actual creation difficulty one Hotmail account for my daughter. I'm using Windows (newer) 8. I have created an account for it, but can't make it work. Everytime I try to sign into his Hotmail I get the following error:

"Hotmail 44 looks like your mother has not finished to set up parental controls for your account settings. Click "Access the parental control settings" to complete the process and access your account. »

Needless to say I went to family safety settings on our PC and the Security Web site for the family repeatedly to change the settings that might seem to apply, but it has only settings web for her, no setting of Hotmail to update me at all. Am I missing something, or is this a problem?

I've seen one or two similar posts...

Thank you

David
Hi BigDcdn,

For us, in order to better afin de mieux aider help you with this issue, please send us screenshots of what follows:
- List of child accounts on https://familysafety.microsoft.com
- Settings for the computer of the child concerned on the site of the family safety (the page where it shows queries, e-mail notifications, etc.).
- The list of the user accounts on your computer
I have sent you a private message for instructions. After you download it, please let know us in this thread.

Thank you.
Okay, so I thought about it and it's ugly and not intuitive.

The REAL CAUSE of the ROOT of this error is that you CANNOT add a new kid in the Family Safety (FSS) Web site.

But as a solution, you can add a new kid on the Section of the Windows Phone website My family.

FIRST STEP remove account the offending child of family on the site of the FSS under the management of the list of the members of the family section. Once this has been completed, follow the workaround below.

WORKAROUND
1. Then from the sign of site Web of Windows Phone with your Microsoft Account (MSA) (parent).
2. Hover over your name just below upper right of the search box and you will get a context box.
3. In the context box, select My Family.
4. In the Section My family, you will have two lists. PARENTS and CHILDREN, and especially an ADD A KID to the right of the list headers.
5. Click on the link. Now, you will get a login screen of the MSA.
6. Register your child or have them enter login and password. They will appear as a kid under the section of your Windows Phone my family. Even if they do not have a phone you can add.
7. Ask them to connect in hotmail\outlook.com with their MSA will complete the configuration of security for the family.
REAL SOLUTION

There must be a link on the site of the FSS for KID A ADD (add a child would be more enjoyable unless of course you are a family of goats) identical to that of the Windows Phone my family section. Seems like a logical place to have this option?

I hope this helps anyone else having this problem.

I tried to set the parental control and received this message: because this computer is connected to a domain, Parental controls are not available.

I have the internet Charter. I am a home user. I tried to set the parental control and received this message: because this computer is connected to a domain, Parental controls are not available. Again, I am a home user. What does that mean?

Hello

1. which user account you are using for Parental control (Please note that you cannot apply parental controls on a user admin account? It can be applied to standard user only accounts)?

2 have you made changes on the computer before this problem?

I ask through the following article to find out how to set up Parental controls:

http://Windows.Microsoft.com/en-us/Windows7/products/features/parental-controls

http://Windows.Microsoft.com/en-us/Windows7/set-up-parental-controls

After completing the above links persist issue please fallow the mentioned below of the methods.

Method 1: Disable UAC (User Account Control) and check the result
See http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-the-behavior-of-user-account-control-by-using-the-slider

Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.

Important: Enable UAC after you complete the steps.

Method 2: If the problem persists, try to set the parental control in safe mode and check the result. If you are able to apply settings in safe mode, this means that some program is causing this problem, mainly the security software.
See http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

Hope the above information is helpful.

Error when you try to set the Parental control 'Unable to set settings for administrators user or unknown users.

I am trying to set up Parental controls for the user account of my son and I get the following error: error when you try to set the Parental control 'Unable to set settings for administrators user or unknown users.

I tried to use the administrator account.

When I ran the System File Check sfc/scannow

TI completed indicating certain files may be damaged and cannot be repaired and check the convertible bonds. LOG file.

How can I know which files are corrupted.

Any other Suggestions on how to fix this user profile? Do I have a profile that I don't know?

Hi wimuggss,

Step 1: Disable UAC (User Account Control) and check the result
See How can I change the behavior of user account control by using the cursor?

Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.

Important: Enable UAC after you complete the steps.

Step 2: If the problem persists, try to set the parental control in safe mode and check the result. If you are able to apply settings in safe mode, this means that some program is causing this problem, mainly the security software.
See Start your computer in safe mode

Kind regards
Syed - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.

RN314 cannot set up alerts

Just I have an open for this support ticket and I'm getting nowhere fast at the moment, while the community has been so useful until now I was wondering if someone here could help/advise.

-For the NASs x RN31400 2 I am owner and you have registered with you I am unable to setup e-mail alerts. I tried to use 3 e-mail addresses of 3 service providers: Yahoo, Hotmail/Outlook and also my own ISP TalkTalk email providers. No matter what settings I use for all 3 e-mail providers, I get the following error message: check the settings of the smtp server cannot send a code error message 5008010002 msmtp test e-mail alert on my 3 x NV + s very well using my Yahoo e-mail address work. On one of the RN31400s using Yahoo worked initially and the alert section would say that it has been configured correctly and I'd get emails to my 2 hotmail addresses, it was on 1 of my RN31400s on the other RN31400 the settings would save not and always say, there was a problem but I had managed through test messages. Now, no matter what settings I use, which email provider I use, etc. I can't e-mail job alerts! Please help because this is obviously a problem with the NASs and the software on devices, the version of the firmware on two is 6.4.1 Ive set up the addresses of 3 E-mail on an e-mail within my network client and all 3 work well, the 3 x NV + s do not have a problem using my Yahoo account to send alerts check my routers and firewalls there is no blocked traffic and I can't telnet to Server 3 Messaging without problems. Please advise/help, thanks.

And...

OK the update of the firmware did not work, I have one of the update firmware version 6.4.2 RN31400 and after 2 reboots, I am still unable to receive job alerts.

The I am using SMTP servers are:

Yahoo =
------------------------
Email provider: Custom
User: [email protected]
Password: xxxxxxx
SMTP server: smtp.mail.yahoo.com
SMTP port: I've tried 25, 465, and 587
From: [email protected]
Use TLS: I tried checked and unchecked

Hotmail/Outlook.com =
------------------------
Email provider: Custom
User: [email protected]
Password: xxxxxxx
SMTP server: smtp - mail.outlook.com
SMTP port: I've tried 25, 465, and 587
From: [email protected]
Use TLS: I tried checked and unchecked

TalkTalk = it's the ISP I use!
------------------------
Email provider: Custom
User: xxxxxxx@TalkTalk,net
Password: xxxxxxx
SMTP server: smtp.talktalk.net
SMTP port: I've tried 25, 465, and 587
From: xxxxxxx@TalkTalk,net
Use TLS: I tried checked and unchecked

Ref: browser, I used Firefox and Internet Explorer, not that it should make no difference whatsoever.

Ref: screen captures, don't need the parameters are listed above for the two RN31400.

Ref: parameters for the NV 3 x + an are as follows:

Yahoo =
------------------------
Email provider: Custom
User: [email protected]
Password: xxxxxxx
SMTP server: smtp.mail.yahoo.com
SMTP port: 465
From: [email protected]
Use TLS: Is checked and

Test of the emails for the configuration of alerts on the NV + s are still working fine, DO NOT WORK for the RN314.

Please tell us what can be done to solve this problem, thank you.

And...

Full error message =

Unable to send a test message.

Unable to send a test message. Check the settings of the SMTP server. Code: 5008010002 error msmtp

DateTime: 05:02:09 04/02/2016

And...

Hello

Just right now I can read the KB article - which does not help somehow:
KB.Netgear.com/app/Answers/Detail/A_ID/23066

There is nothing wrong with the configurations that I use.

All 3 servers SMTP and the above settings work very well on my NAS NV +.

All 3 servers SMTP and the above settings work fine on Outlook or Mozilla Thunderbird's within my network.

All servers SMTP 3 and address listed above work fine when I Telnet to them within my network.

First settings of Yahoo SMTP worked well on one of the RN314 and seemed saved and ok.

Also...

At the beginning of Yahoo SMTP settings worked well on one of the RN314 but not record or say that it has been configured correctly.

Then obviously there is something wrong with the SMTP service/server on these NAS RN314 2 bed.

I am not willing to allow you access as it will provide no benefit whatsoever.

For the course of 20 years, so it's nothing that can be done with you giving remote access with the exception of confirm you what I have already said previously, I have worked in it.

And...

So please advise what Netgear will do then or advise what other other confirming my settings allow remote access?

Your forums to research it seems that problems with mail like this are apparently quite common, so what has already been done to solve the problem?

Also the error code: Code: 5008010002 error msmtp

Why you are not this survey with your development teams who wrote the OS on the NAS working on what actually the error means?

There is nothing wrong with the configuration that it works very well on my 3 x NV + NAS, it works very well in e-mail clients, it works very well in Telnet, and it worked very briefly on the 2 x RN314 of for of Yahoo SMTP settings.

Eron - if you are unable to help further please add this problem to your support line... 3rd line?

Thank you.

And...

I also tried my account GMAIL apps less secure according to this thread the value:

https://community.NETGEAR.com/T5/using-your-ReadyNAS/cannot-set-up-alerts-on-my-ReadyNAS-RN314/TD-p/...

GMAIL =

------------------------
Email provider: Custom
User: [email protected]
Password: xxxxxxx
SMTP server: smtp.gmail.com
SMTP port: I've tried 25, 465, and 587
From: [email protected]
Use TLS: I tried checked and unchecked

If this does not work on the RN314 but it works very well on the NV + of via Telnet and in an email client (x 2)

Please escalate to your next level of support, thank you.

Right, I have fixed on one of the RN314 far...

I backed up all my data on this RN314 and did a factory default.

I have reproduced the RN314 settings manually then nonworking time for the reset RN314 except for identification data, i.e., name, etc.

Exactly as it was before... and now the RN314 in default works fine.

I am currently backing up the data on the RN314 now inactive to perform a Setup factory on that one and see if that solves the problem on this one here.

Then we can close this and I will refer to it with a new thread if I need if the second RN314 still has problems after the default settings.

Need help to set up parental controls

Hello

I want to set up parental controls on my son's laptop computer.

Thus, users are

His name

Director of comp.

Password protected

not monitored by family safety

I thought that I could not / would not set up on the administrator, so I created a second user

His name1

standard user - control parental on

no password

monitored by family safety

I have implemented controls, but they are not in force, I guess, because they should be on his main user? If this means that it can change the settings since this is admin? I'm confused :(

Hi Dee2537,

We are happy to help you set up parental controls in your son's laptop computer. Given the information you have provided, we see that you addressed some of the scenarios where parental control will not work correctly. One of it is implemented in your child as an administrator's account. Family safety not restrict and recognize the account as a child, if the application detects that it is using an administrator account. The other implements access to his account without password because Family Safety requires that the user has a password to secure the account. Because you have pain to configure the account correctly, we strongly recommend that you follow the instructions step by step on how to set up on behalf of the child in the family security and laptop to your son.

Here is the link where you can find the complete steps: setting up parental controls

Please let us know if you need more help and we will help you the best we can.

Thank you.

codec error, I get the message (file cannot be imported because the codec required not installed) how to install appropriate codec?

original title: codec

I have windows vista Home premium. I get the message (file cannot be imported because the codec required not installed) how do we install the right codec

... How to install appropriate codec

There is an excellent set of codecs available here.

Try to install the software and I get an error message saying that the installation cannot continue because a previous installation requires your computer needs to be restarted.

Original title: .net framework 4.6

I try to install the software and I get an error message saying

Setup cannot continue because a previous installation requires your computer must be restarted. Restart your computer and run the Setup again.

so I restart my pc and run it again and the same message appears

Try to perform a "clean boot" to start Windows by using a minimal set of drivers and startup programs. This will eliminate software conflicts that occur when you start Windows, install a program or an update or when you run a program in Windows.
http://support.Microsoft.com/kb/929135

Perform a clean boot to determine if background programs are interfering with your game or other programs
http://support.Microsoft.com/kb/331796

One by one add back an application both in the boot list to find the software application incriminated.

J W Stuart: http://www.pagestart.com

Error when you set up parental controls

Hello world. I have Windows 7 and will have set parental controls to monitor the account of my children. I get the following error...
"There is no end point for most the endpoint mapper." Error code: 800706 9. -What this means and how can I fix the problem so I can use the parental control? Any help would be greatly appreciated! Thank you.

Hello and welcome!

Please try what is shown here:

http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-security/error-800706d9-cannot-set-up-account-for-my-son/e92e8d38-f438-46AD-928a-76c71ba069c5?msgId=e521b2f8-6863-4BD9-903F-8cf7c575ae54

How to set up checkboxes for SelectManyCheckbox programmatically?

Hello experts!

Please help me with my question.

I work with Jdeveloper 12.2.1.0.0

I have SelectManyCheckboxaf:selectManyCheckbox

<af:selectManyCheckbox id="my_selectManyCheckbox"
                  valueChangeListener="#{TasksFilterBean.onTasksFilterPriorityChanged}"
                  autoSubmit="true"
                  required="false">
                      <af:selectItem label="High" value="1" id="si4"/>
                      <af:selectItem label="Middle" value="2" id="si5"/>
                      <af:selectItem label="Low" value="3" id="si6"/>
</af:selectManyCheckbox>

And I need to configure programmatically check boxes.

I found this item the bean.

***
RichSelectManyCheckbox my_selectManyCheckbox = (RichSelectManyCheckbox)task_page.findComponent("my_selectManyCheckbox");


_logger.info("my_selectManyCheckbox: " + my_selectManyCheckbox);

And question.

How to set up checkboxes for SelectManyCheckbox programmatically?

For example.

I want to configure environment checkbox to activate.

How to do this?

PS. I'm tempted to find the solution, before you create new discussion.

I added the SelectManyCheckbox property:

value="#{TasksFilterBean.selectedCheckboxes}"

And I added some methods in the bean:

    private List selectedCheckboxes;

    public void setSelectedCheckboxes(List selectedCheckboxes) {
        this.selectedCheckboxes = selectedCheckboxes;
    }

    public List getSelectedCheckboxes() {

        List selectedCheckboxes = new ArrayList();
        selectedCheckboxes.add("2");

        return selectedCheckboxes;
    }

And now everything works.

=================================

Now I CAT change bean like this:

    private List selectedCheckboxes;

    public void setSelectedCheckboxes(List selectedCheckboxes) {
        this.selectedCheckboxes = selectedCheckboxes;
    }

    public List getSelectedCheckboxes() {
//        List selectedCheckboxes = new ArrayList();
//        selectedCheckboxes.add("2");
        return selectedCheckboxes;
    }

And now I can then use:

        RichSelectManyCheckbox my_selectManyCheckbox= (RichSelectManyCheckbox)task_filter_page_template.findComponent("my_selectManyCheckbox");

        my_selectManyCheckbox.setValue("1");

That all.

Thank you all.

Especially at Jiri.Machotka - Oracle

===========

UPD. I'm sorry. It looks like I can configure values to 1 item on SelectManyCheckbox without bean methods.

And with the above example, I had problems when I unckeked all the check boxes.

Cannot set sga_target with db_block_buffers together
Hello Oracle Community!

I'm putting a sga_target on my Oracle 10 g R2 server, but it gives me the following message: cannot set with game-to db_block_buffers sga_target
Which is exactly the impact on disabling the db_block_buffers parameter? Is it better to do everything in the database not of not used?

Thank you very much!
K - wrote:
@Aman
This database using SPFILE, how do I delete the db_block_buffer on this subject? The only way by using the command CREATE PFILE FROM SPFILE file? Do I have to stop my database of production if I run it?

Thank you

Yes, this is a major change, you will need to bounce back. Probably the way to go would be to create pfile from spfile, copy this edition a safe place away from the pfile, closing and starting with the pfile file. If you made a mistake at this point where it will not come to the top, you can start without the pfile file if you need to, or continue to try to fix the pfile file. When you are up, check that the settings are what you think you did, then create spfile from pfile and bounce. Of course, if performance then goes wacko, you can return the pfile registered until find you out what went wrong.

You can try with the size you are using, then after having worked for a while, use consultants to refine. Note that with sga_max_size it can vary on platform and configuration that you use the difference between the target and max, so platform determines if you should do them the same thing (see thread vs sga_target sga_max_size ). If they must be the same, you must bounce more later when twist you. Familiarize yourself with the HIST viewpoints that record changes in Auto setting, where they occur.

Cannot set a checkbox control to required ("registered user - required")

Similar Questions

Maybe you are looking for