Cannot set the margins or padding

Similar Questions

• LaserJet Pro 400 M401n: How to set the margins for binding up and left for LaserJet Pro 400 M401n

  I am connected to ePremis (medical site) that allows me to print the selected medical forms. ePremis uses the default printer to print the selected form.  The selected form should be printed on a preprinted form that I load into the tray of the printer.

  The problem is that ePremis does not provide an option to set gutter margins and print aligns correctly with my pre-printed form. The print position is a little weak and must also be shifted a little to the left. I need to reduce the high binding margin to move the position of superior print on the page and the left binding margin must also be reduced to move the print a little position to the left so that the printed data will properly align with my pre-printed form.

  Since ePremis does not offer an option to set the margins of the gutter, I need to be able to set the margins of the gutter through the printer driver, but there is also no option provided by the printer driver dialog box to set the margins of the gutter.  :-(

  Is it possible to set the printer LaserJet Pro 400 gutter margins?  I see the margins left and right options in the driver dialog box printer, but they are grayed out and cannot be changed.

  I have another printer, Kyocera laser printer, and I don't have this problem with the Kyocera because it offers the possibility to set gutter margins in the printer driver dialog.  I wonder why the LaserJet Pro 400 does not provide this option?

  I perhaps could solve this problem by sending PCL6 commands to the printer before printing?  I'm a programmer and am open to this option if it would work.

  Your help would be much appreciated.  Thanks in advance!

  Setting margins generally depends on demand - but (you say) that your application does not allow this.

  Some printers provide functionality of saving images , whereby the position of the image of the page onto a physical sheet can be adjusted to the printer, usually on a basis of by-tray.

  For example, with my Laserjet Pro MFP color 400 M475dn, the appropriate menu/menu item is described as follows:

  

  Note:

  • This setting applies to the bar up this that changed, so will have an impact on all the tasks using the specified status bar.
  • Not all printers support these features - I have no idea if your LaserJet M401 exercises or not.

  With regard to the '... sending the commands to the printer before printing... PCL6«» :

  • PCL6 (PCL XL) rather more autonomous than PCL5is, so I'm pretty sure that nothing you can "send" to the device to influence the outcome of the following printing.
  • Even with PCL5 print jobs, standard printer drivers are "overcome and-tail' with universal output language (UEL) escape sequences (which reset the device to the market environment (user - default)), which would be too mount sequences exhaust specific PCL5 previously sent to the device.

• Satellite M100: Cannot set the resolution 1368 x 768 on external LCD screen

  Satellite M100-179
  Graphics - ATI x 1400 card.
  Cannot set the resolution 1368 x 768 on connected usung Sub - D LCD TV Samsung 32R72
  There is no resolution 1368 x 768 in the available resolution list.

  The graphics card hardware support different screen resolutions, but if the driver doesn't contain this resolution of the screen so that you cannot choose it.
  I think so you re not able to choose this special resolution on the external display.

  In my opinion it has nothing to do with the graphics card or with the screen, but only with the graphics driver.

• Cannot set the time zone of Moscow winter + 3 hours.

  Cannot set the time zone of Moscow winter + 3 hours.
  Set the time zone Minsk 3 after the GPS clock moves forward 1 hour, timezone is set back from Moscow + 4.
  It is an error of your software when you are ready to address this issue.

  Automatic deactivation date & time(Settings>Date&Time...)

• Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."

  Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."  How can this be repaired?

  Hi rebick,.

  Try the troubleshooting steps presented by spirit X in this thread.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BIOS HP Compaq Elite (i5-2400 CPU) 8280 cannot set the VT option

  BIOS HP Compaq Elite (i5-2400 CPU) 8280 cannot set the VT option

  found in the security system] [, thanks]

• ERROR - 1051414 - cannot set the role of group with shared services [30:1101:JNDI error] error.

  Hi all

  I tried provide access to filter the group in both SSP and thru Maxl command but still get the error below. Any experience of this problem? If Yes, please let me know how you solved this problem.

  
  

  ERROR - 1051414 - cannot set the role of group with shared services [30:1101:JNDI error] error.

  
  

  Thanks in advance!

  Krishna

  Read the support document that I posted the link, prior to changes for openldap ensure you that it is saved.

• I'm doing slideshows to music with an opening, I would switch to LR, but you cannot set the duration of each slide (in my case the score) based on listening to the music. (In the opening by clicking on the "stopwatch" and pressing enter at each change of

  I'm doing slideshows to music with an opening, I would switch to LR, but you cannot set the duration of each slide (in my case the score) based on listening to the music. (In the opening by clicking on the "stopwatch" and pressing enter at each change of image). Adobe staff question: can I expect to find this option in a future release?

  Hi Pcaubi,

  There is no such updates for the same from now.

  I suggest you to please put in a feature request to: Photoshop community customer family

  Kind regards

  Tanuj

• Cannot set the configured property "/ Initial.initialServices".

  Hi all

  I'm getting following error.

  05:21:52, 006 INFO [STDOUT] cannot set the configured property "/ Initial.initialServices" atg.nucleus.ConfigurationException: could not resolve the component/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet

  05:21:52, 013 INFO [STDOUT] * error

  05:21:52, 064 INFO [STDOUT] cannot set the configured property "/ Initial.initialServices" atg.nucleus.ConfigurationException: could not resolve the component/com/progiweb/fbconnect/pipeline/FacebookProfileRequestServlet

  I checked the path of configuration of two components and the structure of the servlet is as below.

  src/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.java and src/com/progiweb/fbconnect/pipeline/FacebookProfileRequestServlet.java.java

  For properties files I created them under the path - config/atg/dynamo/servlet/dafpipeline / config/atg/dynamo/servlet/pipeline

  Inside of these I keep the files FacebookAuthStatusServlet.properties and FacebookProfileRequestServlet.properties
  

  The Initial.properties is as below - config/atg/dynamo/servlet/Initial.properties

  The content of Initial.properties is-

  & initialServices =.

  / ATG/Dynamo/servlet/dafpipeline/FacebookAuthStatusServlet,.

  / ATG/Dynamo/servlet/dafpipeline/FacebookProfileRequestServlet

  
  

  Should I have to keep the two pipelines-dafpipeline and pipeline or one of them?

  And my pipeline structure is correct or not?

  How to solve the error above?

  Please help on this!

  Kind regards

  Prateek

  You seem to be confusing core components and classes Java.  They are completely different.  The error message that you get "Unable to resolve component", says that the kernel is unable to find a file of specific properties anywhere in the directories named in your configpath trees.  To be precise, there is no file named /com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.properties in your config directory.  If I read correctly this conversation, it is because the file with this name is a .java file, not a .properties file.  The two most likely causes of your problem are:

  1. you have a file of properties somewhere that mentions/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet as the value of something else than $class.  $class is a special case whose value is sought by a Java ClassLoader in the classpath.  Values of the other properties are interpreted as references to the component, and looked up from core in the configpath.

  2. in the directory tree that contains the /com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.properties isn't in the configpath.  ATG displays the complete configpath during startup.  If your directory is missing, you have may have specified correct information in the entrance of the ATG-Config-path in your module MANIFEST. MF file.

• How to set the margins of the document

  Sorry if this is terribly Basic.  I thought that I was put in the margin of the document, but it's only for the page.  How can I set the margins for the entire document?  I could not find in the Format of Document dialog box.

  Thank you!

  Isabella

  Slect all at once in the Pages panel

• ORA-12054: cannot set the ON COMMIT...

  Hello
  can someone please tell me what am I missing here?
  I can't create a materialized view, but I can't understand why is this?
  

  SQL> select * from v$version;
  
  BANNER
  ----------------------------------------------------------------
  Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
  PL/SQL Release 9.2.0.7.0 - Production
  CORE    9.2.0.7.0       Production
  TNS for HPUX: Version 9.2.0.7.0 - Production
  NLSRTL Version 9.2.0.7.0 - Production
  
  
  SQL> r
    1* select master,primary_key from user_mview_logs where MASTER='CIS_CASE' or master='CCR_ACTION_DEF'
  
  MASTER                         PRI
  ------------------------------ ---
  CCR_ACTION_DEF                 NO
  CIS_CASE                       NO
  
  
  
  SQL> r
    1  SELECT a.table_name, a.constraint_name, a.constraint_type, b.column_name
    2    FROM user_constraints a, user_cons_columns b
    3   WHERE a.constraint_name = b.constraint_name
    4*    AND a.table_name IN ('CIS_CASE', 'CCR_ACTION_CASES')
  
  TABLE_NAME                     CONSTRAINT_NAME                C COLUMN_NAME
  ------------------------------ ------------------------------ - ----------------
  CCR_ACTION_CASES               ID_PK                          P ID
  CIS_CASE                       PK_CIS_CASE                    P ID
  CIS_CASE                       SYS_C008496                    C ID
  
  
  
  SQL> CREATE MATERIALIZED VIEW mv
    2    REFRESH FAST ON COMMIT
    3  AS
    4  SELECT c.ID,
    5         CASE
    6            WHEN (c.script_id IS NULL OR c.queue_id IS NULL)
    7               THEN 1
    8            WHEN c.script_id IS NOT NULL AND c.queue_id IS NOT NULL
    9               THEN 2
   10         END TYPE,
   11         c.datum + a.due_time / 24 - a.alarm_due_time_1 / 24 alarm1,
   12         c.datum + a.due_time / 24 - a.alarm_due_time_2 / 24 alarm2,
   13         c.datum + a.due_time / 24 due_date
   14    FROM ccr_action_def a, cis_case c                                  --users u
   15   WHERE NVL (a.queue_id, NVL (c.queue_id, 0)) = NVL (c.queue_id, 0)
   16     AND NVL (a.type_id, NVL (c.case_code_type_id, 0)) =
   17                                                    NVL (c.case_code_type_id, 0)
   18     AND NVL (a.code_id,
   19              NVL (NVL (NVL (c.code_id_4, code_id_3), code_id_2), code_id_1)
   20             ) = NVL (NVL (NVL (c.code_id_4, code_id_3), code_id_2), code_id_1)
   21     AND (c.datum + a.due_time / 24 < SYSDATE)
   22     AND state IN (1, 2)
   23  UNION
   24  SELECT c.ID, 3 TYPE, a.due_date - a.alarm_due_time_1 / 24 alarm1,
   25         a.due_date - a.alarm_due_time_2 / 24 alarm2, a.due_date
   26    FROM ccr_action_cases a, cis_case c
   27   WHERE c.ID = a.cis_case_id
   28     AND (a.due_date < SYSDATE)
   29     AND state IN (1, 2);
    FROM ccr_action_cases a, cis_case c
         *
  ERROR at line 26:
  ORA-12054: cannot set the ON COMMIT refresh attribute for the materialized view

  Vili Dialis wrote:
  Rob, if you have any comments on my last query operation, I would be greatfull.

  Vili,

  You must start with a join view which does not contain any aggregate. Just a join of the ccr_action_def and cis_case. And don't forget to include the two table rowid to make quickly updatable. Then create a full blown newspaper on top of the join mv materialized view and create mv aggregation, selecting in the mv to join.

  Kind regards
  Rob.

  Published by: Rob van Wijk on 14-dec-2009 12:09

  And two boards that are not linked mv:

  (1) as has said, use a.id and c.id in a group by clause for the query itself work
  (2) do not use the string ' 14.12.09", use a date but you compare it with a date. So use: date "2009-12-14'

• 39L4363D - cannot set the record time of beginning and end of filling time

  Hello

  I have a problem with my 39L4363DG tv (software 7.1.90.34.01.1).

  I'm not able time of filling time of beginning and end of record setting as described in the [Manual | http://www.toshiba-om.net/LCD/PDF/English/L4363-323950-English.pdf] on page 51. The menu item "padding-start" and 'end padding time' are disabled?

  Can someone help me and give me advice on how to solve it?

  Hello

  The charging time can be set for the scheduled recording.

  There is also a priority planning
  If the regular time intervals are ensuites to each other and there is more than one minute between the time of the end of the annex i and the next scheduled start time, scheduled recording will be performed correctly.

  When + start time of filling + and + hour of end padding + are value, the start time and end time more is the time the extra minutes.

  If planning time overlap, priority will be given to the scheduled recording starts first.
  When the scheduled recording that began the first ends, recording will switch to the next regular program.
  At that time, according to how much programming time to overlap, the section from the beginning of the next regular program is not registered.

• Tecra A4: Cannot set the resolution of 1280 x 800

  Hi all.

  I have a Tecra A4, and for the last 2 days I am trying set up the screen at native resolution of 1280 x 800, without sucssess.

  I try a lot of things, like updating drivers, use the restoration of the system, the value 'stretch' in the BIOS, etc, but this resolution do not appear on the display settings (I use XP SP2). I've only 800 x 600 and 1024 x 768.

  In any of these resolutions, a wide black border appear to the right of the screen. A small border appears on the bottom, too.

  Please, how can I solve this problem? I don't want to use the Toshiba restore, some programs I use are very difficult to find and install.

  Thank you.

  You cannot set this resolution if this resolution of 1280 x 800 is not part of the display driver.
  The graphics card driver contains all available resolutions and if one is missing, I mean not rated, it s not able to select

  Nothing to buddy

• How can I set the margins of the report?

  Hello

  I try to print a portrait of a JPEG image that was created by a façade by program.

  I print it out by creating a Standard report.

  While the JPEG image is very good, the printed image is compressed on the long edge. So the printed image is a bit distorted.

  I change the property of printing: margins of the vi to the First Call of vi, but the result is the same.

  However, if I open the JPEG image with software such as Picasa and print it, the print image is not compressed or distorted.

  I am attaching a picture of the code that is used to print a picture that shows the property print and JPEG format: margins.

  How can I print it correctly via LabVIEW?

  Hi nikosfs,

  So I took a quick glance to your question a little more, and unfortunately I have not found a solution that meets all your needs. I was able to improve the appearance and the size of the HTML report by changing the entries in registry key for Internet Explorer print settings. You must do this because the HTML report printing settings refer to these registry keys rather than the margin you settings set in LabVIEW. I went ahead and linked to the Microsoft support article below. These registry keys will not only allow you to change the default margins, but they will allow you to remove the header and footer. However, I wasn't able to get the HTML report to print to the pdf printer I had installed as you mentioned. Another method, that you can use to print the image on the front is through the nodes property of the Report.VI reference and invoke. The property for this VI reference node to set the print margin and the parameters of the header. Then, you can use the invoke node to print it. However, once more, using this method I was not able to print successfully in a pdf file either. It seems, therefore, that if you want to print to PDF with precision, the ideal solution would be to use a Word report type since the standard report has the bug I mentioned earlier. You can monitor the status of this bug using the CAR # 49253. I would like to know if you have any other questions, I apologize that we were not able to find an ideal solution for your needs.

  http://support.Microsoft.com/kb/236777

  Paul M

• Error - ' Manager of power strategy cannot set the regime... two revision levels are incompatible "when trying to save the scheme in power options.

  Original title: cannot set a power scheme in Power Options

  Cannot set a power scheme. When I try to save the scheme, "Manager power strategy impossible to define the... two revision levels are incompatible."

  How can I fix it?

  Hi BernieHopkins,

  1 have you properly previously defined the power scheme?

  2 have you made any hardware changes or software on the computer before this problem?

  3. What is the full error message that you receive?

  If you receive the same error as mentioned in this link, you can follow this link & check if the problem persists.

  Error message: Power Manager political unable to define a strategy. Indicates two revision levels are incompatible

  Hope the helps of information.
  Please post back and we do know.