Cannot start Bridge CS6 on Machine in Windows 8.

Similar Questions

• Cannot start Illustrator CS6 64 bit on Windows 7

  I installed upgrading Master CS6 yesterday and almost all applications do not work properly. However, when I try to open Illustrator CS6 64-bit, it returns this error message: "the application could not start correctly (0xc000007b). Click OK to close the application. "The 32-bit version works properly. Any suggestions or similar cases? Thank you.

  I had this problem until tonight and seeing this thread that something occurred to me, like something similar that happened to me once with some Steam games.

  The error means that the program refers, by mistake, a 32-bit instead of a 64-bit DLL. It's all to do with things get mucked up with the Microsoft Visual C libraries.

  Head to the programs and featuresand uninstall all entries in Microsoft Visual C++ Redistributable . Open your CS6 installation folder, then browse to the subfolder of payloads .

  Scroll down and you will find all records Microsoft VC Redist . Install all x 86 versions first, then all x 64 versions. Your problem should now be fixed.

• Error message "cannot start mssql$ sqlexpress on machine" need help!

  Error message "cannot start mssql$ sqlexpress on machine" need help!

  Hello

  -When exactly you receive this error message? It is at the start of the computer or at the launch of a particular application?

  If you use SQL Express DBMS and are faced with this problem, thanks for posting your query in SQL Server Express Forums for assistance on this issue.

• Cannot open Bridge CS6 on start up

  When I start CS6 and go to open Bridge - Bridge CS5 turns on and not the CS6 Bridge. The onley way I can open Bridge CS6 is to go to the Task Manager / processes and stops the .exe bridge

  Richard,

  You can remove safely from Bridge CS5 if you use is no longer. In this way it will have to use the Bridge CS6 when you try to open the bridge.

  -ST

• Error message "WLXPhotoLibraryMain.dll cannot start. "Error code: 0x800736b1" in Windows Live Photo Gallery

  Windows Live Photo Gallery does not load.  Receive the message "WLXPhotoLibraryMain.dll cannot start.  "Error code: 0x800736b1" what should I do?

  Hello

  Fix Windows Live photos from Add/Remove programs or programs and features.  If this does not work, please proceed to uninstalling the app.  It was formerly no Ospreys wing, please proceed with the download and reinstall the application.  I hope that this information is beneficial.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot start gives cs6 adobe dreamweaver (0X0c000007b) error.application will not start

  After a successful installation of the CS6 Dreanweaver. when I start it it gives the following error error.application (0X0c000007b) cannot start.

  solved

• Cannot open Bridge CS6 file in PS CS6

  Bridge cs6, my files will open in Windows photo or Live Photo Gallery Viewer.  When I go to 'Open with' in the file menu PS CS6 is not an option.  I know it must be simple, but it's driving me crazy and I can't get my pictures to open in PS when I double click on one of my tens of thousands of photos.

  I just buy CS6 yesterday.  In addition, what I have to keep the Adobe CS6 file that is on my desk, or can I delete it now that the program is loaded?  He is 1.77 GB.  If I still need to reload PS, I can do it from the store on my account, right?  Even for the Adobe file that is on my desk for the LR4 download a few months previously.  Also, I left checked on 64 download and the regular PS PS6.  I have windows 7 I only need 64-bit.  Why is the other CS6 PS (no 64)?  Do I need?  Should I uninstall it?  Also, should I uninstall CS4 and CS5?  They're all still sitting there, with LR3 (I now use the LR4).  I have huge and several hard drives, so space is not a review.  But I just want to clean it up a bit.

  Lots of questions here, let's see what I can add.

  The problem of file goes to associations of type file/Preferences.  You should have the CS6 selected option to the default extension.  Can try first the option on the bottom button to set the default settings.

  If the 1.77 g you do file refers to is the one you downloaded and used for the installation you can delete.  It is a wise choice to save it to a DVD first so you'll get where you need it in the future.  Also record the serial number in place course.  Acutally safe isn't the right word, the need to put in place where you can find if you need next year.  HD may fail.

  There are still third party plug-ins that do not work in mode 64-bit, so the 32-bit version.  There is also no 64 no bits TWAIN so some like always to use for parsing.

  Some users experience file association and other problems with an uninstall of previous versions.  So, it is more prudent to let them be.

  If you want to clean up a little to resist the urge to move all Adobe programs once is installed.  It can really foul upward.

• Cannot start computerBlack error on the computer WIndows Xp screen

  Original title: Windows will not start

  I have a Dell with Windows XP 4400.  The last time that I started it, it showed at the Windows Welcome screen, but then a black screen that says that Windows did not start.  He gave suggestions to solve the problem, such as "start in safe mode", but none of them worked.  Now what should I do?

  Hello
  1. What is the accurate and complete error message that you receive?
  2. did you make any changes before the show?

  I suggest that you try the troubleshooting provided in the link below steps to solve the problem.

  Computer stops responding with a black screen when you start Windows XP
  http://support.Microsoft.com/kb/314503

• Z820 - BIOS updated to v2.55 - cannot start or install the installation of Windows 7 (UEFI) disc

  Hello

  I have serious problems with the boot and install Windows 7 on my Z820.

  My problems started with Windows Boot Manager, throwing an error in the boot, saying that "the Windows Boot Configuration data file is missing required information". In the end, I decided to do a full clean reinstall of WIndows. However, I was unable to get Windows 7 installed. I was able to boot the disc at retail of Windows 7 64-bit UEFI mode, but he had problems with the installation. Each attempt ended with an error stating that 'Windows could not update the configuration to start the computer. Installation cannot continue. ».

  It was the BIOS v2.08. Intel 520 (240 GB) SSD as boot drive and 2 TB SATA HARD drive as data disc on the ports of controller LSI 2308 0 and 1 respectively. 2 DVD players on Intel AHCI ports.

  I decided to take a different path.

  I removed my data HDD and a DVD of the Z820 player. I put my SSD (which will become the startup disk) and a DVD player on both ports to AHCI.

  I've updated the Z820 BIOS with the latest version (v2.55, February 13, 2013), did a reset CMOS (machined cable disconnected) and reset the BIOS to factory default settings. Then, I put 'OptionROM mass storage' mode EFI and the storage on AHCI mode.

  Now, when I put in retail Windows 7 SP1 64-bit installation DVD and select the drive of DVD (UEFI) to start, I get just a flashing dash. I noticed also that some fans begin immediately turn faster.

  To summarize:

  I am unable to boot Windows 7 SP1 64 bit DVD installation detail at all and therefore impossible to install Windows 7.

  Configuration of the system (as in the last installation attempt):

  -Dual Xeon E5-2680

  -32 GB OF RAM DDR3-1600 PC3-12800

  -240 GB SSD IDE AHCI Intel oucederomsurlesecondport 520

  DVD player - Harbour AHCI

  -NVIDIA Quadro 4000

  -BIOS v2.55 (OptionROM in EFI, Secure Boot disabled mode mass storage)

  I'm getting desperate... ;-)

  Should I try reseating the RAM modules? Remove some RAM? Connect my monitor differently (currently DVI to VGA)? Replace the graphics card?

  Kind regards

  Dries

  In the safety device is the LSI controller set to device available and under device options is Donwload ROM option enabled.
  
  If they are both correct so I would say that your MB doesn't have, I got 3 failure already on my 6 systems! Not been more reliable work stations to this day.
  
  For intergatting search device & patches for WinToolKit, I can share my images because they contain information about the company & registered software.

• G480 - cannot start Dolby Home Theater after upgrade Windows 10 for g480

  Does not start after upgrade to window 10 for my portable home dolby cinema g480. can anyone help? cannot find the driver on the Lenovo Web site

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  Dear Sir

  Welcome to Lenovo Community

  There is no driver for windows 10 for your machine but let try 2 ways, all first try to install the windows 8.1 driver it may be helpful (see below):

  http://support.Lenovo.com/eg/en/products/laptops-and-netbooks/Lenovo-G-series-laptops/LENOVO-G480-No...

  or try the same 10 windows-compatible driver from the below link from driver identifier (when you open the link you will be asked your name & e-mail, you can use fake ones then next page choose non-commercial usage and then from the first link, hope this will work with you,

  http://www.driveridentifier.com/scan/download_file.php?URL=http%3A%2f%2Fcdgenp01.CSD.Toshiba.com%2fc...

  If its is not working so the best solution is to go back to the previous version of windows

  awaiting your response

  Good luck

• Cannot start a suspended virtual machine - impossible to find. VDMK

  Here's the situation.  I supported the package with the virtual machine using time capsule.  I got a serious problem and has decided to remove the virtual machine and return to the time capsule backup.

  Between making the backup and now VMWARE fusion doing an update.

  I can't start the restored VM.  He says he can't find the VDMK if referenced is there, is not corrupt and seems to be in good shape.

  So I thought I would just create a new virtual machine from the VDMK - or even add another virtual computer disk so I could pull some files needed from her.

  It does not work.  When choosing the VDMK - it is gray - and unselectable.

  Issues related to the:

  1. What can I do to get the virtual machine to start

  2. What can I do to ensure that I can select the VDMK and create a new VM from it if I'm not number 1?

  Thanks for any help - I'm quite sunk at this stage.

  Unfortunately, it seems that the 7 VM window is one of the hard data files ("Windows 7 - s010.vmdk") which I assume has a size between 1 and 2 GB missing! Please see if it's available in your backup.

  If this is not the case and you need to access the files on the virtual disk, create a new virtual machine, copy one of the newly created - s00x.vmdk files to the package Windows 7 VM and rename it to "Windows 7 - s010.vmdk. With this fact, or create a snapshot, and then try to turn on the computer virtual or not power on at all, but attach the virtual disk of the virtual machine to another / helper VM as a second drive to be able to access the files you need.

  André

• Cannot start the unique virtual machine after you have patched ESXi to 4.1.0 800830

  I patched a standalone ESXi host yesterday, leading a successful ESXi 4.1.0 800830 upgrade.

  The majority of my virtual machines started very well but it fails to start with the following error (as the specified file does not exist (?)). As I've not met it before, and I'm running out of time, anyone would offer nuggets of wisdom while I continue to trawl the web / these forums for a response?

  

  Thank you

  Carl

  Can you browse the data store where is stored the than VM and check what files you see in the directory for this virtual machine? The error claimed that it cannot find a file of virtual disk for this virtual machine.

• Cannot start the CS6 evaluation version

  I downloaded and installed a trial of the CS6 and Web Design package on my Mac (OS 10.6.8). When I click an app CS6 to launch it, I get a window with some videos and two buttons, one for the software license and who says to start the trial. I click Start the trial, the window disappears and the application does not open. nothing happens. Whenever I click on the apps to start, I get the same window again. What should I do to start the trial apps?

  Your licnesning system is broken. Run the Creative Suite cleanup tool, reinstall. For more specific questions see this:

  Error "Licensing has stopped working". Mac OS

  Mylenium

• Cannot start the CS6 Premiere Pro

  I downloaded Adobe Creative cloud and I'm a registered Adobe user, but when I try the trial version of Premiere Pro CS6 just seems to me like "installed", but in any case, I can start the program. Could you help me?

  If the first pro is not installed (despite the cc desktop application saying it is installed), CC Office lists the applications as "up to date" when it is not installed

• Cannot start the Studio Latitude as a Windows Service

  I installed short-Portal - 2.2.2 on windows 64-bit server.
  It works fine if I start it manually the portal Tomcat instance.
  But I'm unable to run as a Windows Service.
  I followed the instructions in "Latitude Studio Running as a Windows Service" in the Setup Guide.
  But I get the following error.
  
  [2012-09-20 06:18:27] [info] Procrun Commons Daemon (1.0.2.0) started
  [2012-09-20 06:18:27] [info] Running service...
  [2012-09-20 06:18:27] [info] Starting service...
  [2012-09-20 06:18:27] [206 javajni.c] [error] %1 is not a valid Win32 application.
  [2012-09-20 06:18:27] [985 prunsrv.c] [error] Failed to create java D:\Endeca\Latitude\2.2.2\Studio\endeca-portal\tomcat-6.0.29\jre1.6.0_21\win\bin\server\jvm.dll
  [2012-09-20 06:18:27] [1280 prunsrv.c] [error] ServiceStart returned 1
  [2012-09-20 06:18:27] [info] Run the finished service.
  
  Any help will be greatly appreciated.

  What version of Apache tomcat zip you have extracted the service.bat and the tomcat6.exe the tomcat6w.exe? It seems that you are using the installation of java by default, and services tries to start using the 64 bit tomcat.exe.

  Pete