Cannot start the unique virtual machine after you have patched ESXi to 4.1.0 800830

Similar Questions

• ESXi embedded, cannot start the new virtual machine

  We have installed just a Dell PowerEdge 2950 with ESXi embedded.  That part went well.  I am able to connect through the client.  I can create a new virtual machine.  That's where I met problems.  No matter what I tried the machine does not start.  I ' v tried the host device as CDROM, the device as CDROM, and even customer created ISO W2003 CD and downloaded.  I can't understand why he won't start.   Whenever he tried to boot from the network or when he fails he just says "operating system not found" and stays like that.  I started in the bios of the virtual machine and made sure the startup options are correct, etc.  I'm lost.

  I read this forum for like a day and while I see some who have had similar problems, I have not seen this precise question or a question with an answer that applies to my question.  It could be the pre holiday drink

  I hope someone can advise.

  Thank you

  Take a look at this post and try the instructions to boot from an ISO on the side of client - http://communities.vmware.com/message/1106573#1106573.

• 'Environment of the user' Windows cannot load the user's profile, but you have logged on with the default profile for the system.

  Original title: the user environment

  After starting windows, on the Welcome screen, this message always comes.
  "User environment.
  Windows cannot load the user's profile, but you have logged on with the default profile for the system. DETAIL: Not enough memory is available to process this command.
  And all my files that I save before you shut down or restart my pc all the my sample files on the desktop, my documents disappear...

  Thanks... :)

  This is typical of a corrupted profile.  To recover, perform the following steps:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  Almost always, corrupt profiles are accompanied by damaged drive.  During recovery, run a disk check with the /r or /f on your computer option.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• Windows XP, Skype 5.0, Logitech Pro 9000 Webcam, video error: "cannot start video renderer. Make sure you have a valid installation of DirectX.

  Everything has worked out well until the Skype 5.0 download.  Since then, the video does not appear on my screen and displays the following message: "cannot start video renderer. Make sure you have a valid installation of DirectX.

  The driver is up to date and I have DirectX 9.0 c v.

  Thanks in advance for your help.

  Hello.  After several back-and-successive, customer relationship Skype sent me the link depending on where you can get an older version of Skype (4.2.0.187) and many other software if you need. http://www.oldapps.com/Skype.php  I installed it and the audio and video are working as it should with the Logitech Webcam Pro 9000 and Windows XP.

• No there is no way to override the lock 8 hours AFTER you have changed all your questions?

  No there is no way to override the lock 8 hours AFTER you have changed all your questions?

  < object edited by host >

  use the contact for Apple at the bottom of this page and ask them if it is a question about the security of your account.

• Could not start the new virtual machine or VM remove a data store

  Hi guys,.

  I'm not new with ESXi, but my knowledge with vCenter and Clustering must be improved, so here's my problem.

  We have a Cluster of 2 ESXi 4.1 hosts on a San with 2 VMFS.

  My first problem is when I created a new virtual machine and try to start it, I got an error message similar to the one included with this post.

  My Second problem is more picky. Since I am unable to start my new virtual machine, I had removed from drive and I had created a new. But when I took a peek in the data store where was deleted VM, the directory with all the files are still there. When I try to delete it, I got an error message telling me that it is impossible to proceed.

  Q please?

  Best regards

  Stéphane

  82% of failure can be other issues.  The article below

  http://KB.VMware.com/kb/1006052

  Also, I saw, where bad records DB for your ESXi hosts can cause weird problems as well.  The host with the problematic guest, can you do a right click on it and "disconnect"?  Try to get out of the bunch at the data center level.  If you get an error vCenter, that means return folder DB.  From there, while the host is in a disconnected state, remove the host to vCenter, then "add host". This will update the DB record.  Maybe worth it?

• Cannot access the corrupted virtual machine to turn off Creative Suite 4 license

  I had the Creative Suite 4 is installed on a virtual machine in VMWare Fusion. The virtual machine file was corrupted, and I can access is no longer. How do I deactivate my license to create Suite 4, so I can install it on a new virtual machine? (I have all the installation CD and original packaging).

  Serial number and activation support (non - CC) https://forums.adobe.com/thread/2041990 to adjust the number of activations

• Cannot start the virtual machine after you create snapshop

  I found a strange behaviour. I have a Windows 2008 guest that I just copied in my new box ESXi. I am trying to create a snapshot before upgrading the guest to 2012 Windows operating system. The virtual machine has currently no snapshots. Whenever I have create a snapshot, he succeeds, but then I can't start the virtual machine saying that it does not find the vmdk file delta even though I see there in the data store. In order to start the virtual machine, I have to delete the inventory and it readd, but then I lose the snapshot. I also have another computer virtual running Windows 8.1 that does exactly the same thing. How can I create snapshots safely without damaging the virtual machine? I also tried to create the snapshot while the virtual machine has been activated but that makes crashing and then it does not start again, so I have to repeat the process to remove the inventory and it time. Frustrating. See the screenshots, I have attached.

  Once these virtual machines have been in Hyper-V in the past and I just convert to VMware format using the StarWind V2V converter.

  Yes, for an ESXi host and target you must either select the ESX f.vmdk as format target (growable option is for VMware Workstation), or you must convert the virtual machine once more instead of simply upload the files to an ESXi host.

  André

• Could not start the virtual machine after you use vmkfstools to resize - HELP!

  I thought I knew what I was doing, but apparently not...

  I tried to increase the size of a VM over 36 GB drive and now I can not start the server. Here's the change front of directory list:

  -rw - 1 root root 16781312 Sep 20 19:46 PJAEast-DL01-000001 - delta.vmdk

  -rw - 1 root root 325 28 August to 01:52 PJAEast-DL01 - 000001.vmdk

  -rw - 1 root root 4096 9 February 14:55 PJAEast-DL01-000002 - delta.vmdk

  -rw - 1 root root 277 9 February 14:55 PJAEast-DL01 - 000002.vmdk

  -rw - 1 root root 28201 28 August to 01:52 PJAEast-DL01 - Snapshot1.vmsn

  -rw - 1 root root 28267 9 February 14:55 PJAEast-DL01 - Snapshot2.vmsn

  -rw - 1 root root 131604480 26 August at 08:04 PJAEast-DL01 - flat hard

  -rw - 1 root root 8684 25 August at 21:03 PJAEast - DL01.nvram

  -rw - 1 root root 589 25 August at 15:18 PJAEast - DL01.vmdk

  -rw - r - r - 1 root root 1042 28 August to 01:52 PJAEast - DL01.vmsd

  -rwxr-xr-x 1 root root 2779 Feb 9 15:10 PJAEast - DL01.vmx

  -rw - r - r - 1 root root 267 Feb 9 15:10 PJAEast - DL01.vmxf

  -rw - 1 root root 9898631168 9 February 14:54 PJAEast-DL01_1-000001 - delta.vmdk

  -rw - 1 root root 331 28 August to 01:52 PJAEast-DL01_1 - 000001.vmdk

  -rw - 1 root root 73728 9 February 14:55 PJAEast-DL01_1-000002 - delta.vmdk

  -rw - 1 root root 283 9 February 14:55 PJAEast-DL01_1 - 000002.vmdk

  -rw - 1 root root 36322836480 28 August at 01:41 PJAEast-DL01_1 - flat hard

  -rw - 1 root root 597 25 August at 15:18 PJAEast - DL01_1.vmdk

  -rw - r - r - 1 root root 78710 25 August at 16:06 vmware - 1.log

  -rw - r - r - 1 root root 68108 25 August at 20:43 2.log - vmware

  -rw - r - r - 1 root root 122302 28 August at 01:41 vmware - 3.log

  -rw - r - r - 1 root root 90557 Sep 20 19:54 4.log - vmware

  -rw - r - r - 1 root root 69453 9 February 14:54 vmware.log

  Then, I run the command:

  vmkfstools x 256g PJAEast - DL01_1.vmdk

  And now the virtual machine does not start, return an error: "the virtual disk parent has been changed since the child was created."

  The directory listing is now ("BOLD" indicates the change of information post-vmkfstools):

  -rw - 1 root root 16781312 Sep 20 19:46 PJAEast-DL01-000001 - delta.vmdk

  -rw - 1 root root 325 28 August to 01:52 PJAEast-DL01 - 000001.vmdk

  -rw - 1 root root 4096 Feb 9 16:12 PJAEast-DL01-000003 - delta.vmdk

  -rw - 1 root root 277 Feb 9 16:12 PJAEast-DL01 - 000003.vmdk

  -rw - 1 root root 28201 28 August to 01:52 PJAEast-DL01 - Snapshot1.vmsn

  -rw - 1 root root 28267 9 February 14:55 PJAEast-DL01 - Snapshot2.vmsn

  -rw - 1 root root 131604480 26 August at 08:04 PJAEast-DL01 - flat hard

  -rw - 1 root root 8684 Feb 9 16:12 PJAEast - DL01.nvram

  -rw - 1 root root 589 25 August at 15:18 PJAEast - DL01.vmdk

  -rw - r - r - 1 root root 1015 28 August 01:52 PJAEast - DL01.vmsd

  -rwx - 1 root root 2779 Feb 9 16:12 PJAEast - DL01.vmx

  -rw - 1 root root 267 Feb 9 16:12 PJAEast - DL01.vmxf

  -rw - 1 root root 9898631168 9 February 14:54 PJAEast-DL01_1-000001 - delta.vmdk

  -rw - 1 root root 331 28 August to 01:52 PJAEast-DL01_1 - 000001.vmdk

  -rw - 1 root root 73728 Feb 9 16:12 PJAEast-DL01_1-000003 - delta.vmdk

  -rw - 1 root root 283 Feb 9 16:12 PJAEast-DL01_1 - 000003.vmdk

  -rw - 1 root root 274877906944 28 August 01:41 PJAEast-DL01_1 - flat hard

  -rw - 1 root root 599 9 Feb 16:11 PJAEast - DL01_1.vmdk

  -rw - r - r - 1 root root 68108 25 August at 20:43 2.log - vmware

  -rw - r - r - 1 root root 122302 28 August at 01:41 vmware - 3.log

  -rw - r - r - 1 root root 90557 Sep 20 19:54 4.log - vmware

  -rw - r - r - 1 root root 69453 9 February 14:54 5.log - vmware

  -rw - r - r - 1 root root 39510 Feb 9 16:12 6.log - vmware

  -rw - r - r - 1 root root 39411 Feb 9 16:12 vmware - 7.log

  -rw - r - r - 1 root root 39410 Feb 9 16:14 vmware.log

  I can't do anything else until I get comments. Can anyone recommend a way to solve this problem?

  I thought I knew what I was doing, but apparently not...

  I agree

  Two a problem with the new drive.

  1. You get the error message comes from the basic disk with a different size than the disks of the snapshot.
  2. With a size of 256 GB, you will not be able to create snapshots of the disk (on ESXi prior to 5.0 with a block size of 1 MB)

  What you can try to do is to edit the file PJAEast - DL01_1.vmdk :

  • 536870912 VMFS 'PJAEast-DL01_1 - flat hard' RW--> RW 70943040 VMFS 'PJAEast-DL01_1 - flat hard. "
  • DDB. Geometry.Cylinders = "33418'-> ddb.geometry.cylinders = '4416.

  After that, I would recommend to clone the virtual disk to a new one, replace the virtual disk in the virtual machine settings and resize it to a maximum of 254GB (see "calculates the time system required by the snapshot files" at http://kb.vmware.com/kb/1012384)

  • vmkfstools-i PJAEast-DL01_1 - 000003.vmdk PJAEast - DL01_1a.vmdk

  André

• Cannot start the new hard drive after clone on T61p

  I have a T61p which had a Hitachi HD of 100G.  I bought through Lenovo a Toshiba 500 G HD placed in the location of the laptop HD, put the old HD 100 G in an ultrabay adapter when we normally DVD drive and booted from a Clonezilla Live USB 4 G drive.  I made one device to device taking the detault options.  Seems to have worked without any problems.  I change all parameters of the pre box office IBM.

  BIOS is set to boot the HD in the laptop HD slot, then the HD in the ultrabay slot.  However, after start-up, it seems I'm now start from the old drive in the ultrabay adapter.  Windows Vista disk management shows the two discs, and it shows both drives, even with a score of 700M, then roughly a score of 93G.  The new HD has the rest of the unallocated space, which is ok since I use Vista or GPARTED to decompress.  The old HD has a flag "boot" game, and both car are "active".

  If I take the HD in the ultrabay outside housing, I get a black screen with a title of Manager of Windows startup with three options, then the error below:

  file: \windows\system32\winload.exe

  status: 0xc000000e

  DESC: the selected entry could not be loaded because the application is missing or damaged.

  I have googled and looked through this forum and found several hits, but I don't know what I see.  I saw where someone had used Norton Ghost with the - ib switch, but I have used Clonezilla.  Any ideas?

  ALSO, how can I know if I have successfully copied the pre box office IBM?  and if I have to put hormaux or people with reduced mobility, where could I do?

  Problem solved.  Since then I cloned the drive and which included the partition predesktop area/hidden from IBM, so with the old drive in the ultrabay being removed housing, I was able to start using the blue thinkvantage key when starting of the machine.  From there, I could run a repair that solved the problem.  Now, the new disc has the 'boot' flag and cannot be used for a startup in Windows Vista.

• Cannot start a suspended virtual machine - impossible to find. VDMK

  Here's the situation.  I supported the package with the virtual machine using time capsule.  I got a serious problem and has decided to remove the virtual machine and return to the time capsule backup.

  Between making the backup and now VMWARE fusion doing an update.

  I can't start the restored VM.  He says he can't find the VDMK if referenced is there, is not corrupt and seems to be in good shape.

  So I thought I would just create a new virtual machine from the VDMK - or even add another virtual computer disk so I could pull some files needed from her.

  It does not work.  When choosing the VDMK - it is gray - and unselectable.

  Issues related to the:

  1. What can I do to get the virtual machine to start

  2. What can I do to ensure that I can select the VDMK and create a new VM from it if I'm not number 1?

  Thanks for any help - I'm quite sunk at this stage.

  Unfortunately, it seems that the 7 VM window is one of the hard data files ("Windows 7 - s010.vmdk") which I assume has a size between 1 and 2 GB missing! Please see if it's available in your backup.

  If this is not the case and you need to access the files on the virtual disk, create a new virtual machine, copy one of the newly created - s00x.vmdk files to the package Windows 7 VM and rename it to "Windows 7 - s010.vmdk. With this fact, or create a snapshot, and then try to turn on the computer virtual or not power on at all, but attach the virtual disk of the virtual machine to another / helper VM as a second drive to be able to access the files you need.

  André

• Cannot start the VirtualCenter Server Service after reboot of the vcenter - 5.1

  I'm unable to start service VirtualCenter Server and VirtualCenter Management Webservices in my vCenter Server.

  SSO, inventory, Web Client and VirtualCenter all in a single virtual machine running.

  All other services other than the Services of VirtualCenter can be started.

  I get the following error in SSL in my vpxd.log file.

  2013 02-14 T 14: 10:26.713 + 05:30 [04892 error 'Default'] SSL_connect SSLStreamImpl::DoClientHandshake (000000000ce5f3a0) has failed. Dumping error SSL queue:

  2013 02-14 T 14: 10:26.713 + 05:30 [04892 error 'Default'] [0] error routines: 14090086:SSL: SSL3_GET_SERVER_CERTIFICATE:certificate check failed
  2013 02-14 T 14: 10:26.714 + 05:30 [error 04892 "HttpConnectionPool-000001' '] [ConnectComplete] connection failed for < cs p:000000000c9d29c0, TCP:cdcdrvc02:7444 >; CNX: (null), error: class Vmacore::Ssl:SSLVerifyException(SSL_Exception:_Verification_parameters:)
  -> PeerThumbprint: 44:04:3E:61:BD:30:00:EF:75:D6:4 C: 16:01:A5:AA:C3:6 B: F4:C7:B6
  -> ExpectedThumbprint:
  -> ExpectedPeerName: cdcdrvc02
  -> The remote host certificate has these problems:
  ->
  -> * A host string certificate comes from an untrusted root.
  ->
  -> * Hostname does not match the name of the subject in the certificate.)
  2013 02-14 T 14: 10:26.715 + 05:30 [warning 03320 'VpxProfiler"] Vpxd::ServerApp:Init [SessionManagerMo::Init ()] took ms 106725
  2013 02-14 T 14: 10:26.715 + 05:30 [warning 03320 'VpxProfiler"] ServerApp::Init [TotalTime] took ms 112279
  2013 02-14 T 14: 10:26.716 + 05:30 [03320 error 'vpxdvpxdMain'] [VpxdMain] failed to initialize: SSL Exception: audit settings:
  -> PeerThumbprint: 44:04:3E:61:BD:30:00:EF:75:D6:4 C: 16:01:A5:AA:C3:6 B: F4:C7:B6
  -> ExpectedThumbprint:
  -> ExpectedPeerName: cdcdrvc02
  -> The remote host certificate has these problems:
  ->
  -> * A host string certificate comes from an untrusted root.
  ->
  -> * Hostname does not match the name of the subject in the certificate.
  2013 02-14 T 14: 10:26.716 + 05:30 [error 03320 "Default"] could not initialize VMware VirtualCenter. Closing...
  2013 02-14 T 14: 10:26.717 + 05:30 [info 03320 'vpxdvpxdSupportManager"] wrote the free/busy information
  2013 02-14 T 14: 10:34.709 + 05:30 [info 03320 "Default"] forcing of VMware VirtualCenter stop now
  Quick help would be highly appreciated.

  See if that helps

  http://communities.VMware.com/message/2191530

• Windows 8 cannot connect to the external hard drive after you have added the drive case.

  Original title: I have my hard drive from my previous PC attached to my new PC with windows 8. My old PC had XP. How to access the external hard drive?

  I had problems with my XP operating system and could not transfer all the files to my new PC. I spoke with Dell who I believe created the problem with software support. I was told to get out the hard drive, buy a hard drive enclosure and get my files from there. I can't find the hard drive.

  Hello

  Thank you for the update.

  Given that the problem occurs when the hard drive is connected to a different USB port or another computer, it is probably related to the connection of the hard disk.

  Method 1: check if the problem occurs in another computer after removing the hard disk enclosure.

  Method 2:

   

  Step 1: Check if the hard drive is detected in Windows Explorer.

  To do this, follow these steps:

  a. connect the hard disk of the computer.

  b. press the Windows key + E to open Windows Explorer.

  c. check if the hard drive is present here.

  Step 2: Check if the hard drive is detected in disk management.

  To do this, follow these steps:

  a. on the desktop, press the Windows key + X , and then select disk management.

  b. check if the hard drive is listed there.

  Contact the manufacturer of the hard drive and hard drive enclosure for assistance.

  http://www.Seagate.com/support/

  Please get back to us if you have any other questions about Windows operating systems. We are happy to help you.

• What to do with the old user profile after you have created a new user profile

  original title: new user profile

  I was told my user profile is corrupted and create a new one, if I do this is it recommended to give up and delete the old? Or simply use the new profile for the intended use of the new?

  Hello

  They are similar, if not the same, as your question then use these methods to correct problems
  with the account or migrate to another (explained in the last link however you please, don't skip the)
  other measures to start).

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• CV of power virtual machine after a failure to esxi 4.1

  I have a server ESXi 4.1 which is loss of power in the middle of the night. When the server takes over, the virtual machines on the server do not resume. Is it possible to have virtual machines to resume after a power failure? I think remember me this as an option on an earlier version.

  Hello

  1 - Select host

  2 - go to the Configuration tab

  3. Virtual Machine start / stop option

  check the fixing