Cannot start by Satellite A10-S703 from sleep mode

Similar Questions

• Cannot start my satellite 4060 XCDT mode standby

  I can't start my satellite 4060 XCDT from sleep, from his sleep, I have to reboot for it to restart, sometimes, he'll leave the day before, but mostly he used, I tried updating the BIOS, nothing works!

  Hello
  often there is a problem with installed programs that Don t 'like' Mode standby or Hibernate.

  This could be for example downloadable, firewalls, Systemchecking programs.

  What additional hardware. Do you have the connected equipment that Don t supports sleep mode, such as PCMCIA cards for example?

  Good bye

• Cannot start the satellite M35X

  Hi all.

  Cannot start my Satellite.
  When I push the power button, it turns on, the blue led is ok but the HDD led blinks 1 or 2 times or it happened when it is not clear at all and put the laptop off, but the power button remains lit.

  However, from time to time, it starts up, shuts down load the XP but after 1 minute.

  I have reinstaled recently the WinXP, and I did a bios update. Before that, the laptop didn't have this behavior, however, the XP raported me that the hard drive is faulty.
  I figured it is something related to the HARD drive.
  What should I do?

  How can I be sure that the HARD disk is wrong?

  Hi mate,

  If your HARD drive has bad sectors, you must exchange it ;)

  For example before doing this, you can check for bad sectors using specific diagnostic tools HDD as Drive Fitness Test:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  Here, you can download an image file to create a boot disk. Then boot from it and to start the test, it is quite easy! ;)

  If your HARD drive is faulty, this tool should recognize this.

• Hi, after you install Minecraft in my iMac, I get this message: "cannot start minecraft, if you run from a dmg, please drag applications and try again. I Don t know how to start the game. Thank you

  Hi, after you install Minecraft in my iMac, I get this message: "cannot start minecraft, if you run from a dmg, please drag applications and try again. I Don t know how to start the game. Thank you

  So what measures through 'install '?

• Satellite L750 - does not wake from sleep mode

  Hello

  I just bought a Satellite L750 and he didn't wake up from sleep mode. I force with button stop / stop each time in switching mode 'sleep'.

  Any ideas?

  Are you using the original pre-installed OS that you got with your laptop?
  Have you noticed the same problem with the hibernation mode?

  Did you install additional software?

• Re: Is Satellite A10-S703 supports WLan card

  I would like to know if my laptop has Wi - Fi wireless network card?

  Toshiba Satellite A10-S703 model no PSA10E-17UFC-AR

  The wireless network card is optional in this series of laptops.
  This means that some A10 could be equipped with the WLan card and some units are not delivered with the LAN card internal minPCI

  You can very easily check.
  Go to Device Manager and expand network adapters.
  If a wireless network card has been installed, then you should see it!

  Good bye

• Satellite A500-18 x - don't wake up from sleep mode

  I've had this laptop for a little over a week and when it goes into mode 'sleep' trying to wake him up, all the lights on the keyboard lights up and I hear it works but the screen remains black. I updated display drivers and that fixed it for a few days but now it stopped working again. updated audio drivers would force it to not wake from sleep mode kos that he worked well, since I've updated the display driver and then yesterday I updated audio drivers and he returned to not wake up once again in mode 'sleep'. any help much apreciated.

  Updated the BIOS and update the driver to display again.
  Maybe the after the audio driver that something was wrong, you can clean the registry using CCleaner in most of the cases it s a good idea.

• Satellite A100-049 screen remains empty when reactivated from sleep mode

  Intermittently, have been left for a while my screen A100-049 remains empty when reactivated from sleep mode. It does not meet the access keys and have checked the settings which seem to agree.

  Notice that in this case the power button remains 'blue' and not to return to 'Orange flashing. Is this a common problem?

  Hello

  What do you with the mode 'sleep'? Do you mean the hibernation mode or the mode booth? What operating system do you use?

  Listen buddy. It's really not easy to say why it happens without running diagnostic tests. I think you should try to update the graphics driver and check if you are using the latest version of the BIOS. Two updates might be useful in resolving these issues

  Good luck

• Windows 7 not waking from sleep mode

  Hello

  Lately, my DELL Inspiron 580 (Windows Home Basic) caused problems when I try to take out the "sleep mode".

  The symptoms are:

  * Moving the mouse, the LED monitor and Tower remain 'orange '.

  * When I press a key on the keyboard, the Tower starts to emit a higher than normal Purring noise level, it seems to be the fan, but I'm not sure. Monitor LED lights too but shortly after, the monitor switches to "energy saving" mode and doesn't. The Tower continues to emit "fan noise" and its LED remains white, but it does not start, or so it seems that the monitor remains dark.

  * In this State, if the Menu button on the Dell monitor is presses pressed, it flashes a message indicating that no signals are received from the PC.

  * If I turn off the Tower, the Tower power button, and try a bit later, the PC starts, but after a few attempts.

  I would be grateful to receive advice and suggestions.

  Aksa8

  Hello Aksa,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  You made any hardware or software changes on your computer before the show?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur for the following reasons:

  -Powers are damaged or incorrect.
  -BIOS reduces power to the port to which the input device is connected.
  -Point keyboard in Control Panel is not configured to wake the computer when you press a key on the keyboard.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run Troubleshooter of power and control.
  Reference:
  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft Knowledge base article and check the issue.
  Reference:
  The problems of wake the computer from sleep mode
  http://Support2.Microsoft.com/kb/266283

  Important notes:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  Information with dubbing:
  Sleep and extended: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• MacBook pro freezes for 5-10 minutes everytime I wake up from sleep mode?

  Since the upgrade to Yosemite, my macbook pro goes to the loading screen grey which usually appears when opening my laptop after that he almost dies everytime I wake up from sleep mode. It freezes on this screen for a few moments, and then when I get to my normal screen, it continues to remain frozen for an extra few minutes. The mouse will not work until a "Set up Bluetooth keyboard" menu appears, then disappears. The problem has persisted through several software updates. I searched endless forums and topics, but none seem to match my problem. Can anyone help?

  Data sheet:

  OS X Version 10.10.1 Yosemite

  MacBook Pro (15-inch, mid-2012)

  2.3 GHz Intel Core i7 processor

  16 GB 1600 MHz DDR3 memory

  Free to 318,84 GB 107,02 GB

  I had the same situation; started during the upgrade to Yosemite, continued with El Capitan. I tried a n y t h i n g for a few months, revisiting the forums etc. The message in the system log, leaving the "driver GPU seems to be suspended. Does my Mac Pro completely unworkable. It was a software problem because it does not occur in safe mode. Now I just went down to the Mavericks and the problem is completely resolved. I can use my computer again.

• Reference windows xp Dell does not wake from sleep mode

  I am running XP service pack 3. When I try to wake up computer sleep mode orange light flashes but will not start. I hard reboot - sometimes the work - sometimes not. Sometimes he began alone. It is an intermittent problem.

  Hello

  Try the procedure described in the following article and check the status of the issue.

  Solve problems to wake the computer from sleep mode.

  http://support.Microsoft.com/kb/266283

• Need to reset the NIC wireless through troubleshooting whenever I brought back from sleep mode or Hibernate mode?

  My system information:
  -Microsoft Windows 7 Home Premium Version 6.1.7600 Build 7600
  -Toshiba Satellite A505
  -PC x 64
  -Intel Core 2 Duo T6600 @ 2.20 GHz 2200 Mhz 2 carrots 2 logical processors
  -Version/date bios: Insyde 1.70, 15/09/2009
  -smbios version 2.4

  The adapter information:
  Connection to the local network - Realtek PCIe FE Family Controller, updated all drivers, since I'm connected wireless but I guess it says "network cable is unplugged" is normal.

  Wireless network - Realtek RTL8191SE Wireless Lan 802.11n PCI-E NIC, put to update the drivers. It is disconnected, but disabled right out of the standby mode.

  Wireless network connection 2 - Microsoft Virtual Wifi Miniport Adapter, drivers updated. I've never installed it... or something... so I don't know why it's here, or what he does. This disappears when I put in sleep or Hibernate mode and then resume, but reappears after a repair. No matter what he always seems to say no 'connected '.

  Problem:
  Whenever I brought back from sleep mode or Hibernate mode, my internet connection is cut off. Trying to connect to my router, I have an error message and invites me to troubleshoot. I allow the computer to troubleshoot and it resets my wireless adapter, which allows everything to work once more. I ran an ipconfig/all using a Hibernate once and it seems that everything is disabled just before I run troubleshooting... "media disconnected". It is not a huge problem of having to run whenever I resume a session, but it's a boring troubleshooting.

  Failure of solutions:
  Updated all the drivers, when all drivers are always updated
  Disable "Allow the computer turn off the device" tab of power for all 3 cards, at the moment it is always disabled
  Disable ipv6 on all cards, at this time, it is always disabled.

  Interesting facts:
  "Microsoft virtual wifi miniport card knows driver or hardware related problems.
  This came after one of the sessions of troubleshooting... What is the microsoft virtual wifi miniport...?

  Sorry if I did not provide the correct information to help solve my problem... just tell my something else I should add :)

  I had the same problem on my laptop computer l500 do not know why it does this, but it was the case I have reactivated "Allow the computer turn off the device" tab power supply for my wireless adapter and it seems to work again.

  I think it worked because he wasn't let go out properly when I slept I hope laptop that yours is just as easy to fix

• USB mouse - I don't want to wake the computer from sleep mode

  Windows 7 - I don't want my USB mouse to wake up my PC from sleep mode - some say go to Device Manager and uncheck the box 'Allow this device to wake up the PC' - I have in Device Manager - is this still possible?

  Hi David,

  Please contact Microsoft Community.

  As you informed in the query, you can not find to allow this device to

  wake up the PC in Device Manager.

  I suggest you follow the steps below to find the option.

  1. click on start.

  2. in the option Search , please enter run.

  3. in the run window, type devmgmt.msc.

  4. double-click on USB device in order to develop it.

  5. right click on the USB device and click on Properties.

  6. click on the power management tab, check allow this device to wake the computer.

  7. click on OK.

  For more information:

  On the power management

  https://support.Microsoft.com/en-us/KB/2740020

  I suggest you back up the registry and check if that helps.

  Back up the registry:

  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  Warning: serious problems can occur if you have any changes in the registry incorrectly. So, make sure to run back up the registry before you edit it.

  This information is useful. Please let us know if you need help with Windows, we are happy to help you.

  Thank you.

• Laptop with Windows 7 not waking from sleep mode-impossible to repair the files

  My laptop has been not wake sleep for the last days. I think it may have something to do with a recent update. I ran scan SFC who originally gave me the error "Windows resource protection could not perform the requested operation." After using "chkdsk /f/r" the SFC scan was able to complete and it finds corrupted files. Here's what she has (don't know if files below are the same):

  2015-02-24 22:37:35, CSI Info 0000010b transaction [SR] beginning verify and repair

  2015-02-24 22:37:47, Info CSI 0000010 d [SR] cannot repair the military record [l:20 {10}] "mfc42u.dll" Microsoft-Windows-MFC42x, Version = 6.1.7601.17577, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2015-02-24 22:37:57, CSI Info 0000011a [SR] cannot repair the military record [l:20 {10}] "mfc42u.dll" Microsoft-Windows-MFC42x, Version = 6.1.7601.17577, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2015-02-24 22:37:57, CSI Info 0000011b [SR] this element is referenced by [l:150 {75}] "' Package_2_for_KB2506212 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.1.1.2.2506212 - 4_neutral_GDR" "
  2015-02-24 22:37:57, CSI Info 0000011e [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\windows\System32"\[l:20{10}]"Mfc42u.dll '; source file in the store is also corrupted

  2015-02-24 22:44:04, CSI Info 000001e5 transaction [SR] beginning verify and repair
  2015-02-24 22:44:07, 000001e7 CSI Info [SR] cannot repair the military record [l:20 {10}] "mfc42u.dll" Microsoft-Windows-MFC42x, Version = 6.1.7601.17577, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2015-02-24 22:44:07, 000001e9 CSI Info [SR] cannot repair the military record [l:20 {10}] "mfc42u.dll" Microsoft-Windows-MFC42x, Version = 6.1.7601.17577, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2015-02-24 22:44:07, 000001ea CSI Info [SR] this element is referenced by [l:150 {75}] "' Package_2_for_KB2506212 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.1.1.2.2506212 - 4_neutral_GDR" "
  2015-02-24 22:44:07, 000001ed CSI Info [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\windows\System32"\[l:20{10}]"Mfc42u.dll '; source file in the store is also corrupted

  Any help would be great!

  Hi Esque,

  Thank you for the information.

  Please let us know if you have followed the troubleshooting procedures provided in the response ofVitoux K replied on 6 March 2014. (given in my previous post)

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/unable-to-wake-the-computer-from-sleep-mode/6054e168-6f56-43A9-a8c1-5a01e9a288fc

  If the problem persists, suggestions, please follow the link above and let us know the results.

• Connect button on Windows 7 that SOMETIMES appears to wake up from Sleep Mode, sometimes goes right on the desktop

  Hello.  Suddenly, from this morning or perhaps yesterday (April 15), when I click my mouse to wake up my new Windows 7 Inspiron PC from Sleep Mode, a Windows login, button began to appear is no longer for me to need to click.  Only a few minutes ago, when I woke up my PC by clicking my mouse, the button HAS appeared!  Does the show button only SOMETIMES, as every time the PC is asleep (hibernation?) for a SHORT time or long?  I'm puzzled about why this behavior started all of a sudden. Initially, he always showed the button - but maybe it's because as a first step, maybe I had waited long before going to my PC to wake him, don't know.  This new variable behavior could be linked to the 12 April Security Update for Microsoft .NET Framework which perhaps has not taken effect until a subsequent Restart, that maybe, I did last night or this morning?

  Thanks for the ideas.

  Alyse

  Hi Evelyn,

  This problem is perhaps due to the power settings on your computer. Ensure that requires a password on the alarm clock is set. See the following steps.

  1. Click Start, and then click the power Option.
  2. Choose several power supply options. In the Power Options window.
  3. Click on request a password for reactivation.
  4. Save changes and check.

  If the problem persists, run the power Troubleshooter and check. Check out the following link.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.