Cannot start Dell Studio XPS 9100 - is the PSU?

Similar Questions

• Noise of Dell Studio XPS 9100 CPU fan failure CPU fan

  My Dell Studio XPS 9100 did a loud intermittent noise for a few months and then last week I got a CPU fan fault message while booting. I blew all the dust from the fan and I always get the CPU fan failure message. I finally got the system starts by placing a small fan blowing air into the funnel will CPU/processor fan.

  Alas, my warranty expired 2 weeks ago. I'm kicking myself contacting technical support a few months ago, when the problem started.

  I need to replace the fan. What parts need me, and where can I get them?

  Thanks much for the reply.

  Thank you. After being tossed a little I transferred to the sales and ordered a new CPU fan for a cost total which includes shipping and taxes of $42.25. Too bad it wasn't 2 weeks ago, then she would have been free.

  The seller said that I would not need thermal paste. Is this correct?

  Best regards

  Them

• A Dell Studio XPS 9100 usable RAM ECC?

  A Dell Studio XPS 9100 usable RAM ECC? And can we use memory faster PC-10600 and can it use more than 24 GB memory RAM?

  Manual says: 1333 MHz DDR3 NO- ECC only and max is 24 GB.

  Crucial.com offers PC3-12800 DDR3-1600 RAM for this system and it is usually a good indicator of what will work, at least when the use of RAM bought from them.

• Dell Studio XPS 9100 integrated video card?

  Hi guys, I own a Studio XPS 9100 and I currently have GPU issues.

  I want to use my PC without having to rely on my graphics card. The studio XPS 9100 has an integrated video processing system? If so, how can I connect to that?

  I am aware that the Studio XPS 9100 is not an integrated video connector, and I have to use the connector available on the video card in the expansion slot to connect to my monitor.

  Hi Poorbeggarman,

  The card mother Studio XPS 9100 has a GPU integrated, but it is disabled, and there is no way to enable it. You have no other choice than to replace your video card.

• Dell Studio XPS 9100: Case fan care? Cooler CPU upgrade options?

  I want to upgrade the case fans in my XPS 9100, but I've seen much contradictory info in the actual specifications regarding size: are these 92 mm or 120 mm?

  In addition, it is an i7 960: is there a compatible upgrade for the CPU cooler? I don't want or need to COO liquid: want to let it cool a bit. Basic time are constantly around 52 C.

  I think that on all processors in the LGA 1366 socket, the hoses are the same.  On the 9000, I used the cooler DBX - B on 4 different processors in the LGA 1366 socket.  Any socket LGA 1366 cooler should operate, regardless of the CPU.

  The DBX - B can be installed to direct the air in 1 of the 4 directions, depending on how it is mounted.  I have mine pointing upward, to the power supply.  (Note fan blows air in the direction of the fins in aluminium).  Idea is to keep the heat away from the other components of the motherboard and direct it to two fans at the rear (one being in the power supply), which are tailpipes.

• Studio XPS 9100 drivers

  I plan on finally replace my boot with a Samsung 840 Pro 256 GB SSD drive. I had a great experience with the Samsung 840 250 GB big on my laptop.

  I intend to do a clean install of Win 7 Pro 64 bit.

  The most disturbing aspect is always the drivers: I find the Dell Drivers page very confusing because even when I let the Dell software detects my system, it gives me many more options that I think I need, including multiple versions of the same driver.

  Is there a centralized place where I can only get the drivers I really need?

  The basic specifications are given below.

  DG

  ****

  Dell Studio XPS 9100

  BIOS version: DELL - 20101021

  BIOS date: 21/10/10

  Version of window
  Microsoft Windows 7 Professional 64 bit

  Processor manufacturer:
  Intel Core i7 CPU 930 @ 2.80GHz

  Clock speed: 2.9GHz
  L2 Cache size: 1024

  Memory: 24 GB
  DDR3
  Size 4096 MB X 6
  Crucial Technology manufacturer
  Band bandwidth Max PC3 - 10700H (667 MHz)

  Card network adapter: Microsoft Teredo Tunneling adapter

  Hard drives:
  932GB Western Digital WDC WD1001FAES-75W7A0 (SATA)
  3726GB Hitachi sister (SATA)
  932GB Western Digital WDC WD10EALX-009BA0 (SATA)
  1863GB Western Digital WDC WD2002FAEX-007BA0 (SATA)
  932 GB Maxtor Maxtor OneTouch IEEE 1394 SBP2 device (IEEE1394)

  Optical drives:

  HL-DT-ST BD - RE BH30N
  HL-DT-ST DVD +-RW GH50N

  Graphics cards: ATI Radeon HD 5700 Series 1024 MB

  IDE ATA/ATAPI controllers: Intel ICH10R SATA AHCI Controller

  Monitors:
  Wide screen LCD of HP LP2475w

  Reference Dell 2007FP

  Sound Devices:
  ATI High Definition Audio Device
  Realtek High Definition Audio
  M-Audio MobilePre

  USB controllers

  Intel (r) ICH10 family USB Enhanced Host Controller - 3A3C

  Intel (r) ICH10 family - 3 USB universal host controller has 34

  Intel (r) ICH10 family - 3 USB universal host controller has 35

  Intel (r) ICH10 family - 3 USB universal host controller has 36

  Intel (r) ICH10 family - 3 USB universal host controller has 37

  Intel (r) ICH10 family - 3 USB universal host controller has 38

  Intel (r) ICH10 family - 3 USB universal host controller has 39

  Intel (r) ICH10 family USB Enhanced Host Controller - 3A3A

  That's nice. A little more concise than the Belarc report.

  I am looking to download the XPS 9100 under Win 7-64 and see no chipset driver listed.

  Remove the existing disks, it's you. You won't have too much trouble telling which drive is your configuration.

• External port eSATA Studio XPS 9100 does not

  Hi all

  I have a Dell Studio XPS 9100and external eSATA port does not work or it is not detected. I have a Seagate FreeAgent external drive and it can't detected, and it is NOT power up when I plug it into the eSATA port. The FreeAgent drive works fine as it is detected on my laptop Dell Studio XPS 1645eSATA port. The drive is detected on the 9100 when I use the USB cable to the drive (plugged into a USB port, of course).

  I tried to do some research online and some suggestions were to activate via the BIOS eSATA port, but the eSATA port is enabled in the BIOS. The wrong driver is installed on the device? I see the Intel ICH10 Family 6 Port SATA AHCI Controller-3 has 22 in the Device Manager. Is this the right driver to recognize the external eSATA port or is there something else wrong with the 9100?

  Does anyone think that the external eSATA port requires an external drive with its own power supply? The 9100 is a 2010 model year environment, but I think it should not require a player with an external power supply.

  Thank you in advance for your help!

  Hi all

  I grabbed an eSATA disk that has its own power supply (AC adapter) and trendy source on eSATA back port and he recognized the car.

  It seems that the Dell Studio XPS 9100 has of an old eSATA port requiring a drive eSATA that she is clean in order to be energy source active on its external eSATA port. If you try to use a disk without its own power supply eSATA it won't work because the former eSATA ports enabling the way as the USB ports and the new USB ports hybrid eSATA . My laptop Dell Studio XPS 1645 a hybrid one of these ports so apparently it is why my Seagate FreeAgent working on it and NOT on the 9100 desktop. You can't plug a USB cable in the 9100 eSATA port certainly isn't a hybrid eSATA port.

  I guess I solved my own question.

• Need to get the bluetooth works on Dell Studio xps 1640 after upgrade to Windows 8

  I upgraded my Dell Studio xps 1640 to Windows 8. Since then, I've never used Bluetooth, I was not concerned that my bluetooth software was not compatible.  Now, I've found a use for Bluetooth and I can't update my driver because when I try to download the driver I get the error message no bluetooth is detected.  I know that Windows 8 turned off the Bluetooth because of the lack of compatibility, but now I find myself in an enigma. How to Bluetooth if it does not appear?

  YAA dude, I have encountered the same problems with my studio xps 16, tried many things.

  Well, you can try to download the new driver dell wireless bluetooth dell Web site 4.0 module, go to Alienware laptops and look for driver windows 8, will file with a name of "Comm_Broadcom_Win8_X04_A01__Setup-39W36_ZPE", about 170 MB.

  It worked on my Studio XPS...

  Concerning

  Sundeep

  
  http://www.Dell.com/support/drivers/in/en/indhs1/product/Alienware-M18x-R2?s=DHS

  a quick link for you, change to 64-bit windows 8, go to download and communication.

• Dell Studio XPS too noisy!

  I have a Dell Studio XPS 9000 with a Radeon 5870 graphics card that makes too much noise. I think it is the fan noise. I called technical support, which replaced two fans. Did not help - if anything, it is now more noisy he was! All idling, it is not quiet.

  The system is about a year. (Is there more than the 2 fans in the system by the way?)

  (1) can anyone suggest how this system down?

  (2) I contacted a vendor third 3d that makes fans more silent, so-called, but the seller must exact model or type numbers or something Dell fans. Does anyone know how to find out exactly what kind of fans are in the Dell XPS and also exactly what solutions third-party 3d for quieter fans there are, if any?

  It is also an old thread, you should start a new one.

  I assume you mean a Studio XPS 9000.

  This model according to the configuration guide, has no onboard video and no on-board video port is shown in the figure on page 20 of this installation guide. If you cannot select video...

  What do you mean by "the noise of the fan? It's just the fan spins at high speed or is it squealing or some other noise?

  You can open the case and make sure the fan and vents are clean. Use canned air to blow 5 - year-old dust of all components.

  And if this started after a recent update of MS, you can consult the Web of AMD site for an updated driver for the video card today, that works with any version of Windows that you are using before you spend money unnecessarily.

• Studio XPS 9100 motherboard update

  Is there a Dell SATA III motherboard configuration that can be installed in my Studio XPS 9100 from mid-2010?

  This would allow using the card storage and graphics capabilities.

  DDR3 Triple channel 666,5 MHz 18 GB
  Review of motherboard 05DN3X Intel x 58 13
  Intel Core i7 930 at 2.8 GHz

  SATA II SSD and HDD Icapable
  ATI Radeon 370 R7 series

  Corsair CX - M 750 Watt PSU

  Dell does not validate the other cards mothers systems in other systems so that we do not know what can work untested motherboards. Reference valid only Dell the mothers following in the Studio XPS 9100 =
  5DN3X
  XN3F1
  You should look for, "upgrades to the card mother Studio XPS 9100".

• Dell Studio XPS 435MT disk hard clean install of Windows Vista

  My hard drive died on my Dell Studio XPS 435MT. I'm doing a clean install of Windows Vista 64 bit on my new HARD drive using DVD relocation provided by Dell with the PC.

  (1) I am not able to boot from the CD/DVD player, where is the DVD of resettlement. I have set the priorities of boot and disabled the boot from the HDD. Whenever I try to boot from the CD/DVD drive, I gives me a message saying "no Diagnostic Utility Partition identified; Press a key to reboot... »

  If I unplug the new HD, then, I am able to boot from the CD/DVD player and I can not for the Windows Setup screens. However, I can't then point nine hard disk installation.

  (2) as I said, I am able to start Windows Setup screens when the HD is initially disconnected during startup. After I get to the Windows Setup screen I plug HD on the motherboard. The new HD must be recognized if I do this? Currently it is not.

  (3) following the instructions here, I said I need to 'prepare a USB SATA key in advance.

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/Windows-Vista-installation/

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/downloading-preparing-and-loading-SATA-drivers/

  What drivers to I need? I tried the drivers at this link, but when I try to load them on the Windows installation screen I get a message saying that they can not be found.

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=DTT5X&FILEID=2731106696&osCode=WV64&ProductCode=Studio-XPS-435&LanguageCode=en&CategoryID=SA

  Thank you.

  I found this thread on the same subject. Unfortunately your BIOS update can be run from Windows, so that won't help. But down a suggestion to unplug and reconnect the hard drive. Looks like that might work for you.

• Dell studio xps 1645 sound driver IDT works only when it is installed.

  I have the dell studio xps 1645 with windows 7 home premium 64-bit installed on. I have a problem since I format the laptop and reinstalled windows 7 and driver.

  The problem is that with the IDT sound card driver. When I start up the laptop, I couldn't find any noise until then I install the IDT audio driver which is from the website of dell (dell.com.au) under the drivers of dell studio xps 1645 by download. Sounds appears when I installed this driver, but it is not as it should. I mean whenever I do reboot or turn off and then on the laptop, the sound will not come up to what I do reinstall the driver again. The thing is that I have to reinstall the driver whenever I want to use the laptop. can you help me out of this problem? is there any solution for this? I did some research until I get the way to recover my sound, but yes I'm stuck with this relocation pilot to use sound. I did troubleshooting of windows and he said nothing wrong with it. I'll also technician support close to home and they couldn't find anything wrong. I therefore ask microsoft in the hope that they know the way

  . Thank you.

  Hi Felix,.

  Thanks for posting your question on the Forums of community of Microsoft.

  I understand that the sound of your system plays only after you update the audio drivers. The question could arise due to the installation of the corrupt or incompatible driver package.

  Before troubleshooting, I would like to inform you that the drivers for the model of your system on the Dell Web site are displayed for Windows Vista, by default. So, I recommend you to change the operating system to Windows 7 while choosing for pilots.

  In addition, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Try running the fixit for audio playback of Windows problems and check if it helps.

  Diagnose and solve the problems of Windows audio playback automatically

  If the problem persists, try the following method.

  Method 2:

  If you have installed Windows 7 drivers from the website and have not properly been able to play the audio, then I suggest you to install the Windows Vista drivers from Dell site in compatibility mode and check for the issue.

  1. Download the Windows Vista driver on the Dell website.
  2. Right-click on the downloaded driver file.
  3. ClickProperties , and then select the compatibility tab.
  4. Check enable the option run this program in compatibility mode for: , then select Windows Vista from the drop down.
  5. Click OK and install the driver.

  For more information, please visit:

  Make older programs in this version of Windows

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Dell studio xps 435/9000 new cpu required

  Hello

  I posted here earlier on my dell studio xps 435/9000 beeping non stop on start up.  I discovered that the CPU is the problem and must be replaced.

  I have an Intel Dual core i7 (socket LGA1366) processor, what are my options for replacement?

  Can I he move to a Quad core as long as the plug is the same, or should I stick to a dual core.

  If I replace the processor should I replace the motherboard as well?

  Is there a way to know if a particular processor is compatible with my motherboard? (the other is the same)?

  Any help is appreciated, thanks!

  alymad

  The following processors are compatible with the Dell Studio XPS 435 t/9000:
     
  Intel Core i7 920
  Intel Core i7 940
  Intel Core i7-960
  Intel Core i7 965
  Intel Core i7-975

  Before installing the processor, make sure you have BIOS version A16 installed, what support for Intel processors has been added.

  Bev.

  Edited to add content.

• Linksys wireless-G 2.4 GHz DELL Studio XPS laptop. Can do not seem to connect wirelessly.

  Linksys wireless-G 2.4 GHz DELL Studio XPS laptop can do not seem to connect.  has worked before.  Works with a lead wire.  Clues to operate wireless?

  Thank you.

  Hi R4M4,

  1. did you of recent changes on the computer?

  2. what happens when you try to connect wirelessly?

  3. What is the model number of the Linksys router?

  Check and make sure that all the wireless connection settings is correct on the computer.

  In the Windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• How to get out "power save" for DELL studio XPS (VISTA)

  How you exit (escape) from the "energy saving" mode on a DELL studio XPS (VISTA)?

  Hello

  ·         What is the model number of the computer?

  ·         What is the exact error message?

  You can try pressing Fn + F8 and check if it works. You can also see these articles:

  Power plans: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/power-plans-frequently-asked-questions

  Change, create, or delete a power plan (scheme)

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-create-or-delete-a-power-plan-scheme