Cannot start the defrag

When I click on defrag in accy I get a confirmation action window, click on continue and window closes, but nothing happens, what to do? running vista Home premium 64-bit, when I went on the Web site of microsoft and wanded my PID # said # is not good, even after clicking on 64-bit edition Home premium, whats w / that? any help would be great!

Advertisement

Hello

Defrag is no longer a Visual process. Selecting in Accessories/System tools will start it, but it works silently in the background when there is no other system activity. With most of the facilities, will take place of the default task scheduler requires no intervention from the user.

Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

Tags: Windows

Similar Questions

  • PROTECTED 2010 cannot start the Slimline Combo drive

    Hello

    I have two Portege 2010 with two different Slimline Combo drive for Cardbus cable - no two computers are able to start readers Slimline Combo. Two computers with each different drive have been works perfectly in early September, but none now.

    A computer does not recognize the drive of all - the other answer in the hardware profile, it cannot start the drive.

    Both computers are running Windows XP 2nd edition.

    ????

    Thank you

    Best regards
    Anne Mette Voss

    Hello

    Do you mean that the external CD/DVD drive for PC card cannot be recognized in Windows XP?
    Hmm I think I have an idea.
    I think you should go to the Device Manager and remove the * Texas Instruments PCI controller card bus * and * Toshiba ToPIC100 CardBus controller *.
    Reboot the laptop.

    After restarting, the operating system must install new hardware (two controllers carbs) and after this installation, you can try to connect the external PC card, CD/DVD drives again!

    Good luck

  • Cannot start the DSC Shared Memory

    I'm under LabView 7.0 (I know its an older configuration), with DSC and Lookout CPB to make periodic communications to an Omron plc. I needed to update the nor-DAQ because the PCI-6220 card needs the driver. I upgraded to NOR-DAQ 7.5 and now a get the cannot start the Service Manager memory shared DSC. I uninstalled the DSC and reinstalled without change. I found in discussion forums that I need nidscsm.exe in the windows\system32 folder, but is not there. I am running Windows XP.

    I have 2 configurations like that. 1 PC always connects to the controller even if the error appears, another PC connects any, lights flash but error timeout then comms.

    Thank you!

    Sorry, maybe I had my names wrong. He was DAQ - Mx that I've upgraded to v.8.1 and that's where it messes up the communications of the OPC. I knew that if I install the DAQ - Mx without option checked OPC she always clears the NIDSCSM.COM as a service, but I can still use serial OPC communication. Strange...

  • Halo 2 for windows vista does not work on my windows 7. Saiys it cannot start the direct customer

    original title: Halo 2 for windows vista

    Halo 2 for windows vista does not work on my windows 7.  Saiys it cannot start the direct customer.  It will not work in single user either...

    Hello

    Plase make sure you have the latest version of the GFWL Client installed:

    http://www.Microsoft.com/games/en-us/live/pages/livemarketplace.aspx

  • Cannot start the network connection: invalid access to memory location

    Hi team,

    Windows 2003 SP2 cannot start the network connection. Error connections network service terminated with the following error: invalid access to memory location.  Can you help me on this issue?

    Thank you

    Sangaré

    Hello

    Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server 2003 Forum. You can follow the link to your question:

    http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads

  • Error: "Windows cannot start the windows firewall/internet connection sharing (ICS) service.

    On my Eee PC under XP Home edition tablet, I get the error "Windows cannot start the windows firewall/internet connection sharing (ICS) service" when I try to access my firewall. I also can't connect to my router Wireless Lan to go on the internet. This may be due to some viruses that have been deleted using Microsoft Security Essentials.But the problem persists. Could recharge SP2 solve this problem or am I condemned to reload the operating system?

    Hi jdmanel,

    NOTE: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

    Follow the steps in the article.

    You cannot start the Windows Firewall service in Windows XP SP2

    Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

    For reference:

    How to manually open ports in Internet Connection Firewall in Windows XP

  • My windows firewall does not illuminate. Windows cannot start the Windows firewall Service ICS.

    How can I solve unless I need to have this problem to download protection software.

    Hi Octavia10,
     
    -What version of service pack of Windows XP you are using?
     
    Try the methods listed in the given article to resolve this problem:
     
    Note: The steps are applicable to the other version of Windows XP as well.
  • I cannot start the Windows Firewall, I get an error 0x6D9 code

    Original title: error 0x6D9 Code

    I cannot start the Windows Firewall, I get an error 0x6D9 code and I can't find less services. I am running Windows Vista, any help would be appreciated.

    Thank you.

    Original title: error 0x6D9 Code

    I cannot start the Windows Firewall, I get an error 0x6D9 code and I can't find less services. I am running Windows Vista, any help would be appreciated.

    Thank you.

    1 know if your AV (anti-virus) program is supposed to disable your Windows Firewall. Some do it.

    2. you do not do so in respect of the services? You do it in this way? ...............

    Start > Search box, type ser > press the Enter key > scroll down to Windows Firewall...

    under status, it lies and must say... Has begun

    under Type of status, it must be said... Automatic

    If it does not say that, right click on Windows Firewall > properties...

    in Startup Type, click on the pointer, and then select Auto

    to the service status, click Start

    Click OK when finished.

  • The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    original title: The Audio service is not running windows vista

    Hello

    I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    I saw it in Event Viewer

    The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

    Thank you

    -Majid

    original title: The Audio service is not running windows vista

    Hello

    I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    I saw it in Event Viewer

    The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

    Thank you

    -Majid

    These error messages are a pain in the neck to extract useful information.

    I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

    If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

    Realtek and NVIDIA, for example get stuff good free audio driver.

    If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

  • Windows cannot start the firewall service.

    Original title: my firewall stopped working and it won't let me turn it back on.

    My computer has alerted my that my firewall was off this morning. The alert came with the possibility to reactivate after having used the option of tis, another box emerged stating that it cannot be turned on again and try to activate it manually. I tried to turn it on manually and it still doesn't work. He is said to be the first "Windows Firewall settings cannot be displayed because the associated service is not running. You want to start the Windows Firewall Service? "after you press 'Yes', it says"Windows cannot start the firewall service. No error message is given. Any ideas?

    Hey, bed,.

    File system (CFS) auditor scan and see if it finds a breach of integrity. If so, System File Checker will try to replace missing or damaged files.

    Information available at:

     

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Cannot start the peer name resolution protocol Protocol

    No p2p service means no homegroup, which means no access to other computers or to the wireless printer... He worked a few months ago, and now, the protocol name resolution by peers, well defined to automatic, does not start, even if I click on properties, etc. and ask him to startr. I have ' windows cannot start the Protocol PNRP, error 0 x 80630203.»

    I still have unresolved problems with backups, so I don't want a new installation of windows.
    I'm getting so fed up with all the unsolved problems of windows! is windows 8 is going to be better?
    Thanks for your help.

    Hello

    Please keep us updated.

    You can read the articles below and see if it helps:

     

    Add a device or computer to a network

    http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

     

    Share files via public folders

    http://Windows.Microsoft.com/en-us/Windows7/share-files-using-the-public-folders

    If you need further assistance, please answer and we will be happy to help you.

  • Error 1079: Windows cannot start the Diagnostic Policy on Local Computer Service

    Windows cannot start the Diagnostic Policy on Local Computer Service?

    Original title: error 1079

    Hi Craig,.

    Thanks for posting your question in the Microsoft Community.

    From your post, it seems you are getting and error 1079.

    The problem may occur if the service is started by the Local System account instead of the Local Service account (NT AUTHORITY\LocalService). The Local System account may have sufficient permissions to start the service.

    What service are you trying to start?

    We will follow the steps in this link and check if this solves the problem.

    Services do not start, and you receive an error 1079 on a computer that is running Windows Server 2008, Windows Vista, Windows 2008 R2 or Windows 7

    Thanks for posting the result and let us know if you need help on Windows.

  • Cannot start the application - error code 8

    I'm running one of my own apps and I get this message:

    "Cannot start the application - error code 8.

    What is the error code 8? Where can I find a list of all error codes?

    Thanks in advance

    If you get error 8 or 13, and that everything you did is OK for this:

    -Uninstall all versions of your application

    -Restart the playbook

    -Install and run again

  • Cannot start the Simulator

    All of a sudden, Eclipse will not run the Simulator for me. I get the following message: any Simulator, I try to run:

    Cannot start the Simulator. Verify that the file exists. (java.lang.IllegalArgumentException: name of the executable integrated quote, divide the arguments)

    Even if I go to the directory where the Simulator is and run 9900.bat, the Simulator starts and works very well. And clicking on run in Eclipse valid successfully any changes to my program for the Simulator. Yet Eclipse always gives me the error message above.

    Anyone know why?

    Hi POS.

    Clean the Simulator.

    In Eclipse

    Open the project-> BlackBerry-> own Simulator.

    I hope that now you have the solution.

    Kind regards

    Umang.

    -------------------------------------------------------------------------------

    feel free to press the button like on the right side to thank the user who has helped you.

  • Cannot start the application... Error code 13

    I installed my real application in device playbook by using the debugging token. Request worked fine.but nw am not able to open the application. "Cannot start the application...". Error code 13 shows this error message while trying to open the application... .i don't know what to do...! Help, please...!

    Thank you

    I had solved it. It was the problem of token bug. It was expired while I have created a new and run the application .nw, it works very well.

Maybe you are looking for


HashFlare