Similar Questions

• Cannot start the services after update to 6.6 CentOS

  Hello

  Today, I've updated my CentOS to release 6.6.

  When I now try to run the current version of the reader for my virtual Windows 7, I get after the modules updated the error message "cannot start services. See log file for more details /tmp/vmware-root/vmware-modconfig-3866.log".

  The log file is added.

  Who can help me?

  Greetings!

  kuespert

  Hello

  I have another problem after Player 6.0.4 update. See /dev/vmmon with Reader 6.0.4 and CentOS lack 6.6

  The current thread continues here.

  Greetings!

  kuespert

• Cannot start the computer after Virus infection

  Hello
  I fixed with a virus program all viruses on my laptop, and of course I deleted one is infected.

  When I rebooted my laptop that the engine was told that autocheck was not found and I want to skip this task.

  After that, I come to the xp-connection (I've never seen before) showing my user name in the user field and asks me to put a password. (I've not due to the fact that I've never used it)

  If I just go along to a click on OK without putting a password the laptop starts up (with the corresponding music) and stops after a few seconds.

  Finally I got to the same place, I described at the beginning.

  Thanks for helping me...
  costachicca

  PS: would be nice if a person speaks German could respond to this topic, so I really understand.

  Hello

  First the form of Toshiba standard language is English and all ads that are written in other languages will be erase.

  Now on your problem: he s strange! Have you tried to boot the operating system in safe mode? You can start the operating system in safe mode by pressing the F8 key so the unit to boot.
  Then you can try to check the system.
  If this procedure doesn't work, well in my opinion the easiest workaround is to recover the OS with the supplied restore CD.

  Hope it of understandable for you and I hope that these tips will help you

  Good bye

• Cannot start the database after reducing the size of the RAM

  Hi all

  I have a database of GR 11, 2 installed in virtual box VM. Initially, I got 3 GB of RAM for this machine (when the database has been installed).

  I then reduced it to 1 GB. Then I tried to start the database, but I got error below.

  MEMORY_TARGET not supported on this system

  
  

  Help, please.

  
  

  Thank you

  Mauricette.
  

  User618902-OC says:

  Is it not possible to reduce the size of the RAM and start the database with configuration on MEMORY_TARGET changes?

  What part of "MEMORY_TARGET not supported on this system" do you NOT understand?

• Blue Screen BAD_POOL_CALLER cannot start the laptop after Windows XP updates

  My user has a Dell Latitude E6500 and after installing Windows Update, the laptop does not start in Windows XP.  Tried to repair, reinstall all Modes and each option we just get error BAD_POOL_CALLER not boot into the operating system.

  Reference Dell it's a software problem, probably caused by the update as no other changes have been made to the laptop.  Before we pay for Dell support software means someone has suggestions?  All options on Googling guess you can enter Windows in at least secure Mode that we can not so I'm stuck!

  See you soon

  See this article for some real good troubleshooting Info:

  0X000000C2: BAD_POOL_CALLER
  http://aumha.org/a/stop.htm

  Also:

  How can I solve this? (bad_pool_caller)?
  http://www.Tek-Tips.com/viewthread.cfm?QID=423270

• Cannot start the PC after MS Updates

  Later installed MS Updates Friday, restarted PC and it appears with the following message to any attempt to boot the PC:

  Reboot and select proper boot device or insert boot media in selected boot device and press a key.

  It is a RAID system, and this is not the first time that MS Updates were killed. Previously, I've been able to startup repair and operate. This time, he fails.

  During the phase of computer repair, after loading the driver RAID, the repair process States: finds any problems with options to start your computer. Want to ask repair and restart your computer. (I had a glance on the details and he found the installation of Windows 7 Pro X 64) Select Yes, and then immediately, I received the following:

  Failed to save startup options.

  Any thoughts?

  See you soon

  G

  Windows Update the drivers of your motherboard can be one of the possible reasons why you experience a problem with your computer after installing/running Windows Update. Update chipset drivers may result in conflicts with an outdated BIOS. The integrated RAID controller depends on the version of the BIOS installed in your motherboard.

  With this, we suggest disable you the driver in your Windows Update.

  Follow the steps below on how to disable the update of the driver:

  1. Press on and hold Windows key + R and type "sysdm.cpl" then press the enter key.
  2. Click the hardware tab.
  3. Click Device Installation settings.
  4. Select "No, let me choose what to do" and "never install driver software from Windows Update".
  5. Click on save changes.

  You will receive still all the other Windows Update as usual. If a piece of hardware should be updated in the future, you will need to go to the hardware manufacturer's website to download and install the latest version of the driver.

  Let us know how it goes.

• Cannot start the instance after adding nodes to the cluster

  Hello world
  
  After you add a third node to my group, I can't start instance. Error:
  

  ORA-01078: failure in processing system parameters
  ORA-01565: error in identifying file '+DATA/gwt/spfilexxxx.ora'
  ORA-17503: ksfdopn:2 Failed to open file +DATA/gwt/spfilexxxx.ora
  ORA-01034: ORACLE not available
  ORA-27123: unable to attach to shared memory segment
  Linux-x86_64 Error: 13: Permission denied

  Additional information:

  [grid@nodedc3 ~]$ crsctl query css votedisk
  ##  STATE    File Universal Id                File Name Disk group
  --  -----    -----------------                --------- ---------
   1. ONLINE   7887e29070204f52bfda4091940f4672 (ORCL:VOTE_OCR) [OCR_VOTE]
  Located 1 voting disk(s).
  [grid@nodedc3 ~]$ srvctl status asm -a
  ASM is running on nodedc3,nodedc2,nodedc1
  ASM is enabled.
  [grid@nodedc3 ~]$ ps -ef | grep lsnr | grep -v 'grep' | grep -v 'ocfs' | awk '{print $9}'
  LISTENER_SCAN2
  LISTENER
  [grid@nodedc3 ~]$ olsnodes -n
  nodedc1 1
  nodedc2 2
  nodedc3 3
  [grid@nodedc3 ~]$ crs_stat -t -v
  Name           Type           R/RA   F/FT   Target    State     Host
  ----------------------------------------------------------------------
  ora.DATA.dg    ora....up.type 0/5    0/     ONLINE    ONLINE    nodedc1
  ora.FRA.dg     ora....up.type 0/5    0/     ONLINE    ONLINE    nodedc1
  ora....ER.lsnr ora....er.type 0/5    0/     ONLINE    ONLINE    nodedc1
  ora....N1.lsnr ora....er.type 0/5    0/0    ONLINE    ONLINE    nodedc2
  ora....N2.lsnr ora....er.type 0/5    0/0    ONLINE    ONLINE    nodedc3
  ora....N3.lsnr ora....er.type 0/5    0/0    ONLINE    ONLINE    nodedc1
  ora....VOTE.dg ora....up.type 0/5    0/     ONLINE    ONLINE    nodedc1
  ora.asm        ora.asm.type   0/5    0/     ONLINE    ONLINE    nodedc1
  ora.cvu        ora.cvu.type   0/5    0/0    ONLINE    ONLINE    nodedc1
  ora.gsd        ora.gsd.type   0/5    0/     OFFLINE   OFFLINE
  ora.gwt.db     ora....se.type 0/2    0/1    ONLINE    ONLINE    nodedc1
  ora....network ora....rk.type 0/5    0/     ONLINE    ONLINE    nodedc1
  ora....SM1.asm application    0/5    0/0    ONLINE    ONLINE    nodedc1
  ora....C1.lsnr application    0/5    0/0    ONLINE    ONLINE    nodedc1
  ora....dc1.gsd application    0/5    0/0    OFFLINE   OFFLINE
  ora....dc1.ons application    0/3    0/0    ONLINE    ONLINE    nodedc1
  ora....dc1.vip ora....t1.type 0/0    0/0    ONLINE    ONLINE    nodedc1
  ora....SM2.asm application    0/5    0/0    ONLINE    ONLINE    nodedc2
  ora....C2.lsnr application    0/5    0/0    ONLINE    ONLINE    nodedc2
  ora....dc2.gsd application    0/5    0/0    OFFLINE   OFFLINE
  ora....dc2.ons application    0/3    0/0    ONLINE    ONLINE    nodedc2
  ora....dc2.vip ora....t1.type 0/0    0/0    ONLINE    ONLINE    nodedc2
  ora....SM3.asm application    0/5    0/0    ONLINE    ONLINE    nodedc3
  ora....C3.lsnr application    0/5    0/0    ONLINE    ONLINE    nodedc3
  ora....dc3.gsd application    0/5    0/0    OFFLINE   OFFLINE
  ora....dc3.ons application    0/3    0/0    ONLINE    ONLINE    nodedc3
  ora....dc3.vip ora....t1.type 0/0    0/0    ONLINE    ONLINE    nodedc3
  ora.oc4j       ora.oc4j.type  0/1    0/2    ONLINE    ONLINE    nodedc1
  ora.ons        ora.ons.type   0/3    0/     ONLINE    ONLINE    nodedc1
  ora.scan1.vip  ora....ip.type 0/0    0/0    ONLINE    ONLINE    nodedc2
  ora.scan2.vip  ora....ip.type 0/0    0/0    ONLINE    ONLINE    nodedc3
  ora.scan3.vip  ora....ip.type 0/0    0/0    ONLINE    ONLINE    nodedc1
  [grid@nodedc3 ~]$ crs_stat -t -v | grep ams
  [grid@nodedc3 ~]$ crs_stat -t -v | grep asm
  ora.asm        ora.asm.type   0/5    0/     ONLINE    ONLINE    nodedc1
  ora....SM1.asm application    0/5    0/0    ONLINE    ONLINE    nodedc1
  ora....SM2.asm application    0/5    0/0    ONLINE    ONLINE    nodedc2
  ora....SM3.asm application    0/5    0/0    ONLINE    ONLINE    nodedc3
  [grid@nodedc3 ~]$ ocrcheck
  Status of Oracle Cluster Registry is as follows :
           Version                  :          3
           Total space (kbytes)     :     262120
           Used space (kbytes)      :       3068
           Available space (kbytes) :     259052
           ID                       : 1523128137
           Device/File Name         :  +OCR_VOTE
                                      Device/File integrity check succeeded
  
                                      Device/File not configured
  
                                      Device/File not configured
  
                                      Device/File not configured
  
                                      Device/File not configured
  
           Cluster registry integrity check succeeded
  
           Logical corruption check bypassed due to non-privileged user

  I use Centos 5.8 and Oracle 11.2.0.3. Thanks in advance
  
  Edited by: 922736 2013-05-13 23:51

  Hello

  Sometimes, we are not able to access ASM for creation of database due to permissions on a file ' Gride_Home/bin/oracle' owner should be like this:

  -rwsr-s - x 1 grid oinstall 152462728 October 12, 2012 /u01/app/11.2.0/grid/bin/oracle

• PROTECTED 2010 cannot start the Slimline Combo drive

  Hello

  I have two Portege 2010 with two different Slimline Combo drive for Cardbus cable - no two computers are able to start readers Slimline Combo. Two computers with each different drive have been works perfectly in early September, but none now.

  A computer does not recognize the drive of all - the other answer in the hardware profile, it cannot start the drive.

  Both computers are running Windows XP 2nd edition.

  ????

  Thank you

  Best regards
  Anne Mette Voss

  Hello

  Do you mean that the external CD/DVD drive for PC card cannot be recognized in Windows XP?
  Hmm I think I have an idea.
  I think you should go to the Device Manager and remove the * Texas Instruments PCI controller card bus * and * Toshiba ToPIC100 CardBus controller *.
  Reboot the laptop.

  After restarting, the operating system must install new hardware (two controllers carbs) and after this installation, you can try to connect the external PC card, CD/DVD drives again!

  Good luck

• Windows cannot start the firewall service.

  Original title: my firewall stopped working and it won't let me turn it back on.

  My computer has alerted my that my firewall was off this morning. The alert came with the possibility to reactivate after having used the option of tis, another box emerged stating that it cannot be turned on again and try to activate it manually. I tried to turn it on manually and it still doesn't work. He is said to be the first "Windows Firewall settings cannot be displayed because the associated service is not running. You want to start the Windows Firewall Service? "after you press 'Yes', it says"Windows cannot start the firewall service. No error message is given. Any ideas?

  Hey, bed,.

  File system (CFS) auditor scan and see if it finds a breach of integrity. If so, System File Checker will try to replace missing or damaged files.

  Information available at:

   

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot start the unit because the authorization service is not running - cannot start service

  I'm weirded out. When I try to start the unit on my VM, I get the following message:

  The Virtual Machine cannot be set to Unity mode because:
  -The VMWare authorization Service is not running.

  So, after a little checking, I realize that indeed, the authorization Service is not running on my host. I am trying to launch and get the following message (translated from the french, sorry):

  Windows cannot start the VMWare authorization on your local server. For more information, see Event Viewer. If this isn't a Microsoft service, contact your service provider indicating the service specific error code: 6000002.

  Event Viewer is a little more detailed... But not really useful:

  Unable to retrieve the token for the user to VMware: unknown error 1385 (0 x 569) (1385)

  NONE of these error messages to display more than a few visits on Google, especially not in exact search (with quotes around the exact phrase) mode. I'm at a loss as to what I can operate the unit.

  Technical details:

  Host: Windows XP SP3 (French)

  Dell Optiplex 760, Intel Core 2 Duo E8600 @ 3.33 GHz. 3 GB of Ram.

  VMWare: 7.0.0 build-203739

  Client: Windows XP SP3 (English)

  I have attached my log of vmware just in case. Will be extremely grateful for any help!

  Thank you!

  The only other thing I can think is a reinstallation of the vmx86 service. Rerun the batch previously posted like this, with the extreme detail;

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 36

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - stop vmx86

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - uninstall vmx86

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - install vmx86

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - beginning vmx86

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 3

  and repeat once more for authd thereafter;

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 36

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - stop authd

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - uninstall authd

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - install authd

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - beginning authd

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 3

  If this does not help I suggest you reinstall workstation completely from your own account. Don't forget to note your serial number if your IT Department has already given it you.

  Joakim

  BTW, it might be that your group policy to prevent something. Check with your IT, if others have the same problem.

• Cannot start the database the R12 DR Oracle EBS of RAC 10 g R2 using SRVCTL

  Hello
  
  I've implemented Oracle 10g R2 RAC data DR Guard for main server Oracle 10 g R2 RAC for EBS R12 (12.0.4).
  I followed Note + ' Business Continuity for Oracle Applications Release 12 on Release 10 gr 2 - Single Instance Database and RAC [452056.1 ID]. +.
  After you configure DR DG, I added DR Database to the Configuration of the Cluster. But I'm not able to start the DR Database via SRVCTL. But able to start the DR Database through Sql * more. I have already mentioned Note: + troubleshooting when srvctl cannot start the RAC instance, but sqlplus can start [ID 844272.1] + and tried to solve the problem but without success.
  
  , I opened SR but still, the problem is not resolved. Are there steps I need to do that is not mentioned in Note 452056.1.
  
  Rgds,
  Thiru

  Have you reviewed these docs?

  CRS - 215 srvctl cannot start ASM, listener, %ORACLE_HOME%/bin/ resources RDBMS with error [740319.1 ID]
  Could not start the Instance with Srvctl, no Info in the newspapers of Imon [ID 741212.1]

  Thank you
  Hussein

• Cannot start the VM, corrupted disk

  Hello

  I can't start my VM. I get the error message "file not found: FSL_vm5_32.vmdk". I then navigate to the file, which is where it should be, select this option and keeps coming, same error.  Opening of the FSL_vm5_32.vmdk it seems ok. I pasted the files vmdk and vmx below. I noticed that the size of the hard disk is 0 bytes. If I click on the hard drive I get an error "the specified file is not a virtual disk.  So I tried to add a hard disk using an existing virtual drive and then got the same error that "the specified file is not a virtual disk.  Then I tried to import the virtual machine by using the source of other and selecting the VMX file. Which gives an error that it cannot determine the guest operating system.

  Looking for the log file, it appears that one of the files that make up the virtual disk cannot be read. I have posted the log below.

  Is it possible to repair this file or around?

  I am running VMware Workstation 6.5.2 build-156735 on Windows Vista Ultimate 64-bit. The virtual machine is a Linux RedHat enterprise 5.

  Thank you

  Darren

  -

  ---

  VMDK file

  -

  ---

  1. Disk DescriptorFile

  version = 1

  CID = cf43ba12

  parentCID = ffffffff

  createType = "twoGbMaxExtentSparse.

  1. Description of the measure

  RW SPARSE 4192256 "FSL_vm5_32 - s001.vmdk".

  RW SPARSE 4192256 "FSL_vm5_32 - s002.vmdk".

  RW SPARSE 4192256 "FSL_vm5_32 - s003.vmdk".

  RW SPARSE 4192256 "FSL_vm5_32 - s004.vmdk".

  RW SPARSE 4192256 "FSL_vm5_32 - s005.vmdk".

  RW SPARSE 4192256 "FSL_vm5_32 - s006.vmdk".

  RW SPARSE 4192256 "FSL_vm5_32 - s007.vmdk".

  RW SPARSE 4192256 "FSL_vm5_32 - s008.vmdk".

  RW SPARSE 4192256 "FSL_vm5_32 - s009.vmdk".

  RW SPARSE 4192256 "FSL_vm5_32 - s010.vmdk".

  RW SPARSE 4192256 "FSL_vm5_32 - s011.vmdk".

  RW SPARSE 4192256 "FSL_vm5_32 - s012.vmdk".

  RW SPARSE 4192256 "FSL_vm5_32 - s013.vmdk".

  RW SPARSE 4192256 "FSL_vm5_32 - s014.vmdk".

  RW SPARSE 4192256 "FSL_vm5_32 - s015.vmdk".

  RW SPARSE 30720 ' FSL_vm5_32 - s016.vmdk '.

  RW SPARSE 4192256 "FSL_vm5_32 - s017.vmdk".

  RW SPARSE 4192256 "FSL_vm5_32 - s018.vmdk".

  RW SPARSE 4192256 "FSL_vm5_32 - s019.vmdk".

  RW SPARSE 4192256 "FSL_vm5_32 - s020.vmdk".

  RW SPARSE 4192256 "FSL_vm5_32 - s021.vmdk".

  RW SPARSE 10240 "FSL_vm5_32 - s022.vmdk".

  1. The disk database

  #DDB

  ddb.toolsVersion = "7429.

  ddb.adapterType = "free".

  DDB. Geometry.sectors = "63".

  DDB. Geometry.Heads = "255".

  DDB. Geometry.Cylinders = "3916.

  ddb.virtualHWVersion = "6".

  DDB. Encoding = "windows-1252".

  -

  ---

  VMX file

  -

  ---

  #! / usr/bin/vmware

  . Encoding = "windows-1252".

  config.version = '8 '.

  virtualHW.version = "6".

  scsi0. Present = 'TRUE '.

  scsi0.virtualDev = "free".

  memsize = "2560.

  MemAllowAutoScaleDown = "FALSE".

  scsi0:0. Present = 'TRUE '.

  scsi0:0. FileName = "FSL_vm5_32.vmdk".

  IDE1:0. Present = 'TRUE '.

  IDE1:0. AutoDetect = 'TRUE '.

  IDE1:0. DeviceType = "cdrom-raw"

  floppy0. AutoDetect = 'TRUE '.

  ethernet0. Present = 'TRUE '.

  ethernet0. ConnectionType = "custom".

  ethernet0.wakeOnPcktRcv = "FALSE".

  USB. Present = 'TRUE '.

  EHCI. Present = 'TRUE '.

  Sound.Present = 'TRUE '.

  sound.fileName = "-1".

  Sound.AutoDetect = "TRUE".

  SVGA. AutoDetect = 'TRUE '.

  pciBridge0.present = 'TRUE '.

  insulation. Tools.hgfs.Disable = "FALSE".

  displayName = "FSL_vm5_32."

  guestOS = "rhel5.

  NVRAM = "FSL_vm5_32.nvram."

  deploymentPlatform = "windows".

  virtualHW.productCompatibility = "hosted".

  RemoteDisplay.vnc.port = '0 '.

  Tools.Upgrade.Policy = "upgradeAtPowerCycle".

  floppy0. FileName = ' / dev/fd0.

  IDE1:0.startConnected = 'TRUE '.

  ethernet0. AddressType = 'generated '.

  UUID. Location = "56 4 d 3 c 03 71 7A 0e 01-4th 38 c5 d0 63 4 66 04"

  UUID. BIOS = "56 4 d 3 c 03 71 7A 0e 01-4th 38 c5 d0 63 4 66 04"

  scsi0:0. Redo = «»

  pciBridge0.pciSlotNumber = "17".

  scsi0.pciSlotNumber = "16".

  ethernet0.pciSlotNumber = "32".

  sound.pciSlotNumber = "33".

  ehci.pciSlotNumber = "34".

  ethernet0.generatedAddress = "00: 0C: 29:63:4 d: 04»

  ethernet0.generatedAddressOffset = '0 '.

  IDE1:0. FileName = "automatic detection".

  tools.syncTime = "TRUE".

  chipset.useAcpiBattery = 'TRUE '.

  chipset.useApmBattery = 'TRUE '.

  sharedFolder.option = "disabled".

  sharedFolder.maxNum = '1 '.

  sharedFolder0.present = 'TRUE '.

  sharedFolder0.enabled = 'TRUE '.

  sharedFolder0.readAccess = 'TRUE '.

  sharedFolder0.writeAccess = 'TRUE '.

  sharedFolder0.hostPath = "C:\data".

  sharedFolder0.guestName = "Windows".

  sharedFolder0.expiration = "session".

  vmotion.checkpointFBSize = "16777216.

  floppy0.startConnected = "FALSE".

  debugStub.linuxOffsets = "0x0, 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0.

  usb.autoConnect.device0 = «»

  checkpoint.vmState = «»

  numvcpus = '2 '.

  MKS. Enable3D = "FALSE".

  bios.forceSetupOnce = "FALSE".

  svga.maxWidth = "1600".

  svga.maxHeight = "1200".

  svga.vramSize = "134217728.

  ethernet0.VNET = "VMnet0.

  fileSearchPath = 'C:\Users\drg\Virtual Machines\fsl_vm5_32.';

  monitor = "debug".

  monitor_control.log_vmsample = 'TRUE '.

  -

  ---

  ERROR LOG

  -

  ---

  Impersonation user drg in session 814E83FA-2704-4966-88CC-BF79C662727A

  Entering UFAD to QuerySourceInfo

  source:

  (sysimage. HostedSourceVMSpec) {}

  dynamicType = & lt; unset & gt;

  vmxFilePath = "C:\Users\drg\Virtual Machines\fsl_vm5_32\FSL_vm5_32.vmx",

  }

  Creating local map...

  Registration disposable session object Id = VmiQuerySourceInfoTask::task the associated disposable session object id = VmiQuerySourceInfoTask::task with the session id = 814E83FA-2704-4966-88CC-BF79C662727A

  VmiQuerySourceInfoTask::task: start of the execution of a task of image processing VmiQuerySourceInfoTask::task: SetState at race

  VmiQuerySourceInfoTask initialized

  Creating local map...

  Parsing local vmx file C:\Users\drg\Virtual Machines\fsl_vm5_32\FSL_vm5_32.vmx

  DISKLIB are RARE: 'C:\Users\drg\Virtual Machines\fsl_vm5_32\FSL_vm5_32-s020.vmdk': cannot open (15): unable to load the header.

  DISKLIB-LINK: 'C:\Users\drg\Virtual Machines\fsl_vm5_32\FSL_vm5_32.vmdk': cannot open (the specified file is not a virtual disk).

  DISKLIB-STRING: 'C:\Users\drg\Virtual Machines\fsl_vm5_32\FSL_vm5_32.vmdk': cannot open (the specified file is not a virtual disk).

  DISKLIB-LIB: unable to open 'C:\Users\drg\Virtual Machines\fsl_vm5_32\FSL_vm5_32.vmdk' with flags 0 x 11 (the specified file is not a virtual disk).

  Adding bus IDE 1 controller keyed 201.

  LocalVirtualDiskSpec: name = C:\Users\drg\Virtual Machines\fsl_vm5_32\FSL_vm5_32.vmdk

  Create a local connection to the slave co-located

  DISKLIB-DSCPTR: open : ' FSL_vm5_32 - s001.vmdk ' (0xe)

  DISKLIB-DSCPTR: open : ' FSL_vm5_32 - s002.vmdk ' (0xe)

  DISKLIB-DSCPTR: open : ' FSL_vm5_32 - s003.vmdk ' (0xe)

  DISKLIB-DSCPTR: open : ' FSL_vm5_32 - s004.vmdk ' (0xe)

  DISKLIB-DSCPTR: open : ' FSL_vm5_32 - s005.vmdk ' (0xe)

  DISKLIB-DSCPTR: open : ' FSL_vm5_32 - s006.vmdk ' (0xe)

  DISKLIB-DSCPTR: open : ' FSL_vm5_32 - s007.vmdk ' (0xe)

  DISKLIB-DSCPTR: open : ' FSL_vm5_32 - s008.vmdk ' (0xe)

  DISKLIB-DSCPTR: open : ' FSL_vm5_32 - s009.vmdk ' (0xe)

  DISKLIB-DSCPTR: open : ' FSL_vm5_32 - s010.vmdk ' (0xe)

  DISKLIB-DSCPTR: open : ' FSL_vm5_32 - s011.vmdk ' (0xe)

  DISKLIB-DSCPTR: open : ' FSL_vm5_32 - s012.vmdk ' (0xe)

  DISKLIB-DSCPTR: open : ' FSL_vm5_32 - s013.vmdk ' (0xe)

  DISKLIB-DSCPTR: open : ' FSL_vm5_32 - s014.vmdk ' (0xe)

  DISKLIB-DSCPTR: open : ' FSL_vm5_32 - s015.vmdk ' (0xe)

  DISKLIB-DSCPTR: open : ' FSL_vm5_32 - s016.vmdk ' (0xe)

  DISKLIB-DSCPTR: open : ' FSL_vm5_32 - s017.vmdk ' (0xe)

  DISKLIB-DSCPTR: open : ' FSL_vm5_32 - s018.vmdk ' (0xe)

  DISKLIB-DSCPTR: open : ' FSL_vm5_32 - s019.vmdk ' (0xe)

  DISKLIB are RARE: 'C:\Users\drg\Virtual Machines\fsl_vm5_32\FSL_vm5_32-s020.vmdk': cannot open (15): unable to load the header.

  DISKLIB-LINK: 'C:\Users\drg\Virtual Machines\fsl_vm5_32\FSL_vm5_32.vmdk': cannot open (the specified file is not a virtual disk).

  DISKLIB-STRING: 'C:\Users\drg\Virtual Machines\fsl_vm5_32\FSL_vm5_32.vmdk': cannot open (the specified file is not a virtual disk).

  DISKLIB-LIB: unable to open 'C:\Users\drg\Virtual Machines\fsl_vm5_32\FSL_vm5_32.vmdk' with flags 0xe (the specified file is not a virtual disk).

  Virtual disk C:\Users\drg\Virtual Machines\fsl_vm5_32\FSL_vm5_32.vmdk is invalid or needs repair

  Sysimage.fault.MalformedDisk new MethodFault thrown:

  Cannot read the news of the OS on the system disk: sysimage.fault.MalformedDisk

  VmiQuerySourceInfoTask::task: task of Image processing failed with MethodFault::Exception: sysimage.fault.UnableToDetermineGuestOs VmiQuerySourceInfoTask::task: SetState error

  deleted explicitly object: VmiQuerySourceInfoTask::task VmiQuerySourceInfoTask::task destroyed

  CloseSession called for the session id = 814E83FA-2704-4966-88CC-BF79C662727A

  Removed from vmdb connection /db/connection/#6 /.

  FSL_vm5_32 - s020.vmdk seems to be corrupted. Can you post the first 10 bytes of this file?

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Cannot start CF 10 after upgrade Mountain Lion

  Hello

  ... was just curious to know if anyone cannot start ColdFusion 10 after update to OSX (10.8.2) Mountain Lion? Someone at - it not to be able to start it?

  Thanks in advance,

  Rich

  ... OK, with no. through Adobe or Apple (they have both pointed fingers toward each other, how to let your faithful between your contest pssing) here is what I did to solve this problem:

  I ran the installer in CF10 and the first thing that appears, it is that "..." CF needs a different version of Java to install this program, download it now? "I downloaded and installed the Java version and closed the CF10 Installer. Of course, CF10 began. I really hope this helps someone as this will leave many people swinging in the air...

  Rich

• Cannot start the DSC Shared Memory

  I'm under LabView 7.0 (I know its an older configuration), with DSC and Lookout CPB to make periodic communications to an Omron plc. I needed to update the nor-DAQ because the PCI-6220 card needs the driver. I upgraded to NOR-DAQ 7.5 and now a get the cannot start the Service Manager memory shared DSC. I uninstalled the DSC and reinstalled without change. I found in discussion forums that I need nidscsm.exe in the windows\system32 folder, but is not there. I am running Windows XP.

  I have 2 configurations like that. 1 PC always connects to the controller even if the error appears, another PC connects any, lights flash but error timeout then comms.

  Thank you!

  Sorry, maybe I had my names wrong. He was DAQ - Mx that I've upgraded to v.8.1 and that's where it messes up the communications of the OPC. I knew that if I install the DAQ - Mx without option checked OPC she always clears the NIDSCSM.COM as a service, but I can still use serial OPC communication. Strange...

• Halo 2 for windows vista does not work on my windows 7. Saiys it cannot start the direct customer

  original title: Halo 2 for windows vista

  Halo 2 for windows vista does not work on my windows 7.  Saiys it cannot start the direct customer.  It will not work in single user either...

  Hello

  Plase make sure you have the latest version of the GFWL Client installed:

  http://www.Microsoft.com/games/en-us/live/pages/livemarketplace.aspx