Cannot start the database after reducing the size of the RAM
Hi all
I have a database of GR 11, 2 installed in virtual box VM. Initially, I got 3 GB of RAM for this machine (when the database has been installed).
I then reduced it to 1 GB. Then I tried to start the database, but I got error below.
Help, please.
Thank you
Mauricette.
User618902-OC says:
Is it not possible to reduce the size of the RAM and start the database with configuration on MEMORY_TARGET changes?
What part of "MEMORY_TARGET not supported on this system" do you NOT understand?
Tags: Database
Similar Questions
-
He cannot start Oracle Database after server restart.
construction of an oracle Hyperion Essbase and planning sandbox on my laptop using VMware 9.0
and 11 GR 2 as database of New York City.
Once I completed the installation and configuration, I install the client EAS essbase, once completed I have too reboot the server
Once the server is back, the database gives me the following error:
Database Instance: Hyperion
Enterprise Manager is unable to connect to the database instance. The State of the components are listed below. Page updated August 31, 2013 2:19:45 CEST
Database instance
Host localhost
Port 1521
Hyperion SID
C:\app\Administrator\product\11.2.0\dbhome_1 Oracle Home
Earphone
Down status
Host localhost
Port 1521
Name LISTENER
C:\app\Administrator\product\11.2.0\dbhome_1 Oracle Home
Location C:\app\Administrator\product\11.2.0\dbhome_1\network\admin
TNS-12541 details: Listener TNS:no
Connection to the Instance of the agent
State has failed
ORA-12541 details: TNS:no listener (DBD ERROR: OCIServerAttach)
Change the details of the State
Copyright (c) 1982, 2010, Oracle. All rights reserved.
SQL > connect to an idle instance.
SQL > SQL > ORA-00119: invalid specification for the system LOCAL_LISTENER parameter
ORA-00132: error syntax or network name not resolved "LISTENER_HYPERION."
Disconnected
Database Instance: Hyperion
Error message
The startup of the database operation failed. Click on "View details" to see the error. You may need to perform a restore.
See the details
Perform a recovery
Enterprise Manager is unable to connect to the database instance. The State of the components are listed below. Page updated August 31, 2013 12:56:37 CEST
Please notify
%ORACLE_HOME%=C:\app\Administrator\product\11.2.0\dbhome_1 this looks OK
but I did a search for TNSlistener. ORA file and it wasn't there?
I missed an aseo when configuring the database
Please notify
-
Cannot start the database the R12 DR Oracle EBS of RAC 10 g R2 using SRVCTL
Hello
I've implemented Oracle 10g R2 RAC data DR Guard for main server Oracle 10 g R2 RAC for EBS R12 (12.0.4).
I followed Note + ' Business Continuity for Oracle Applications Release 12 on Release 10 gr 2 - Single Instance Database and RAC [452056.1 ID]. +.
After you configure DR DG, I added DR Database to the Configuration of the Cluster. But I'm not able to start the DR Database via SRVCTL. But able to start the DR Database through Sql * more. I have already mentioned Note: + troubleshooting when srvctl cannot start the RAC instance, but sqlplus can start [ID 844272.1] + and tried to solve the problem but without success.
, I opened SR but still, the problem is not resolved. Are there steps I need to do that is not mentioned in Note 452056.1.
Rgds,
ThiruHave you reviewed these docs?
CRS - 215 srvctl cannot start ASM, listener, %ORACLE_HOME%/bin/ resources RDBMS with error [740319.1 ID]
Could not start the Instance with Srvctl, no Info in the newspapers of Imon [ID 741212.1]Thank you
Hussein -
PROTECTED 2010 cannot start the Slimline Combo drive
Hello
I have two Portege 2010 with two different Slimline Combo drive for Cardbus cable - no two computers are able to start readers Slimline Combo. Two computers with each different drive have been works perfectly in early September, but none now.
A computer does not recognize the drive of all - the other answer in the hardware profile, it cannot start the drive.
Both computers are running Windows XP 2nd edition.
????
Thank you
Best regards
Anne Mette VossHello
Do you mean that the external CD/DVD drive for PC card cannot be recognized in Windows XP?
Hmm I think I have an idea.
I think you should go to the Device Manager and remove the * Texas Instruments PCI controller card bus * and * Toshiba ToPIC100 CardBus controller *.
Reboot the laptop.After restarting, the operating system must install new hardware (two controllers carbs) and after this installation, you can try to connect the external PC card, CD/DVD drives again!
Good luck
-
Windows cannot start the firewall service.
Original title: my firewall stopped working and it won't let me turn it back on.
My computer has alerted my that my firewall was off this morning. The alert came with the possibility to reactivate after having used the option of tis, another box emerged stating that it cannot be turned on again and try to activate it manually. I tried to turn it on manually and it still doesn't work. He is said to be the first "Windows Firewall settings cannot be displayed because the associated service is not running. You want to start the Windows Firewall Service? "after you press 'Yes', it says"Windows cannot start the firewall service. No error message is given. Any ideas?
Hey, bed,.
File system (CFS) auditor scan and see if it finds a breach of integrity. If so, System File Checker will try to replace missing or damaged files.
Information available at:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Cannot start the vCenter Server Service
Cannot start the vCenter Server Service. To get this message to control the attached screenshot
2013-09 - 03T 21: 34:18.800 + 05:30 [info 03612 'utilvpxdVdb'] [VpxdVdb::SetDBType] connect to DSN: VMware vCenter with username
2013-09 - 03T 21: 34:18.800 + 05:30 [03612 error 'utilvpxdVdb'] [VpxdVdb::SetDBType]: database error: ODBC error: (IM002) - data [Microsoft] [ODBC Driver Manager] source name not found and no default driver specified
2013-09 - 03T 21: 34:18.800 + 05:30 [03612 "Default" error] error obtaining configuration information from the database
This looks like a problem in the registry for the part of the database or a correctly configured system DSN.
-
Cannot start the unit because the authorization service is not running - cannot start service
I'm weirded out. When I try to start the unit on my VM, I get the following message:
The Virtual Machine cannot be set to Unity mode because:
-The VMWare authorization Service is not running.So, after a little checking, I realize that indeed, the authorization Service is not running on my host. I am trying to launch and get the following message (translated from the french, sorry):
Windows cannot start the VMWare authorization on your local server. For more information, see Event Viewer. If this isn't a Microsoft service, contact your service provider indicating the service specific error code: 6000002.
Event Viewer is a little more detailed... But not really useful:
Unable to retrieve the token for the user to VMware: unknown error 1385 (0 x 569) (1385)
NONE of these error messages to display more than a few visits on Google, especially not in exact search (with quotes around the exact phrase) mode. I'm at a loss as to what I can operate the unit.
Technical details:
Host: Windows XP SP3 (French)
Dell Optiplex 760, Intel Core 2 Duo E8600 @ 3.33 GHz. 3 GB of Ram.
VMWare: 7.0.0 build-203739
Client: Windows XP SP3 (English)
I have attached my log of vmware just in case. Will be extremely grateful for any help!
Thank you!
The only other thing I can think is a reinstallation of the vmx86 service. Rerun the batch previously posted like this, with the extreme detail;
Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 36
"%programfiles%\vmware\vmware workstation\vnetlib.exe" - stop vmx86
"%programfiles%\vmware\vmware workstation\vnetlib.exe" - uninstall vmx86
"%programfiles%\vmware\vmware workstation\vnetlib.exe" - install vmx86
"%programfiles%\vmware\vmware workstation\vnetlib.exe" - beginning vmx86
Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 3
and repeat once more for authd thereafter;
Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 36
"%programfiles%\vmware\vmware workstation\vnetlib.exe" - stop authd
"%programfiles%\vmware\vmware workstation\vnetlib.exe" - uninstall authd
"%programfiles%\vmware\vmware workstation\vnetlib.exe" - install authd
"%programfiles%\vmware\vmware workstation\vnetlib.exe" - beginning authd
Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 3
If this does not help I suggest you reinstall workstation completely from your own account. Don't forget to note your serial number if your IT Department has already given it you.
Joakim
BTW, it might be that your group policy to prevent something. Check with your IT, if others have the same problem.
-
Cannot start the DSC Shared Memory
I'm under LabView 7.0 (I know its an older configuration), with DSC and Lookout CPB to make periodic communications to an Omron plc. I needed to update the nor-DAQ because the PCI-6220 card needs the driver. I upgraded to NOR-DAQ 7.5 and now a get the cannot start the Service Manager memory shared DSC. I uninstalled the DSC and reinstalled without change. I found in discussion forums that I need nidscsm.exe in the windows\system32 folder, but is not there. I am running Windows XP.
I have 2 configurations like that. 1 PC always connects to the controller even if the error appears, another PC connects any, lights flash but error timeout then comms.
Thank you!
Sorry, maybe I had my names wrong. He was DAQ - Mx that I've upgraded to v.8.1 and that's where it messes up the communications of the OPC. I knew that if I install the DAQ - Mx without option checked OPC she always clears the NIDSCSM.COM as a service, but I can still use serial OPC communication. Strange...
-
original title: Halo 2 for windows vista
Halo 2 for windows vista does not work on my windows 7. Saiys it cannot start the direct customer. It will not work in single user either...
Hello
Plase make sure you have the latest version of the GFWL Client installed:
http://www.Microsoft.com/games/en-us/live/pages/livemarketplace.aspx
-
Cannot start the network connection: invalid access to memory location
Hi team,
Windows 2003 SP2 cannot start the network connection. Error connections network service terminated with the following error: invalid access to memory location. Can you help me on this issue?
Thank you
Sangaré
Hello
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server 2003 Forum. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads
-
On my Eee PC under XP Home edition tablet, I get the error "Windows cannot start the windows firewall/internet connection sharing (ICS) service" when I try to access my firewall. I also can't connect to my router Wireless Lan to go on the internet. This may be due to some viruses that have been deleted using Microsoft Security Essentials.But the problem persists. Could recharge SP2 solve this problem or am I condemned to reload the operating system?
Hi jdmanel,
NOTE: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756
Follow the steps in the article.
You cannot start the Windows Firewall service in Windows XP SP2
Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users
For reference:
How to manually open ports in Internet Connection Firewall in Windows XP
-
How can I solve unless I need to have this problem to download protection software.
Hi Octavia10,-What version of service pack of Windows XP you are using?Try the methods listed in the given article to resolve this problem:Note: The steps are applicable to the other version of Windows XP as well. -
I cannot start the Windows Firewall, I get an error 0x6D9 code
Original title: error 0x6D9 Code
I cannot start the Windows Firewall, I get an error 0x6D9 code and I can't find less services. I am running Windows Vista, any help would be appreciated.
Thank you.
Original title: error 0x6D9 Code
I cannot start the Windows Firewall, I get an error 0x6D9 code and I can't find less services. I am running Windows Vista, any help would be appreciated.
Thank you.
1 know if your AV (anti-virus) program is supposed to disable your Windows Firewall. Some do it.
2. you do not do so in respect of the services? You do it in this way? ...............
Start > Search box, type ser > press the Enter key > scroll down to Windows Firewall...
under status, it lies and must say... Has begun
under Type of status, it must be said... Automatic
If it does not say that, right click on Windows Firewall > properties...
in Startup Type, click on the pointer, and then select Auto
to the service status, click Start
Click OK when finished.
-
original title: The Audio service is not running windows vista
Hello
I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.
I saw it in Event Viewer
The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.
Thank you
-Majid
original title: The Audio service is not running windows vista
Hello
I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.
I saw it in Event Viewer
The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.
Thank you
-Majid
These error messages are a pain in the neck to extract useful information.
I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.
If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.
Realtek and NVIDIA, for example get stuff good free audio driver.
If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period
-
Cannot start the peer name resolution protocol Protocol
No p2p service means no homegroup, which means no access to other computers or to the wireless printer... He worked a few months ago, and now, the protocol name resolution by peers, well defined to automatic, does not start, even if I click on properties, etc. and ask him to startr. I have ' windows cannot start the Protocol PNRP, error 0 x 80630203.»
I still have unresolved problems with backups, so I don't want a new installation of windows.I'm getting so fed up with all the unsolved problems of windows! is windows 8 is going to be better?Thanks for your help.Hello
Please keep us updated.
You can read the articles below and see if it helps:
Add a device or computer to a network
http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network
Share files via public folders
http://Windows.Microsoft.com/en-us/Windows7/share-files-using-the-public-folders
If you need further assistance, please answer and we will be happy to help you.
-
Error 1079: Windows cannot start the Diagnostic Policy on Local Computer Service
Windows cannot start the Diagnostic Policy on Local Computer Service?
Original title: error 1079
Hi Craig,.
Thanks for posting your question in the Microsoft Community.
From your post, it seems you are getting and error 1079.
The problem may occur if the service is started by the Local System account instead of the Local Service account (NT AUTHORITY\LocalService). The Local System account may have sufficient permissions to start the service.
What service are you trying to start?
We will follow the steps in this link and check if this solves the problem.
Thanks for posting the result and let us know if you need help on Windows.
Maybe you are looking for
-
Hello So here's my problem: I want to go of a sequence like the following XML: I want to be able to detect if I am currently processing the first or the last node to send a notification to my GUI. That's what I read on the equals method, I was hoping
-
Cannot install updates - muweb_site.cab? 1302788930718 is not signed
original title: muweb_site.cab? 1302788930718 When I try to download the updates, I get a warning saying, muweb_site.cab? 1302788930718 is not signed. I can't update.
-
I downloaded ccleaner on my HP pavilion 2225nr g6 and I thought that I could clean up old unwanted program is what I deleted a saved document file, but I don't know how to put new. I don't see a problem yet, but I haven't restarted but either. The on
-
Hey smart people!For a personal project, I want to make posters like the ones you see here. I got stuck trying to make the bottom. So I got the color and the bloodspats, but it is the old texture and falls outside of that I don't know how to fix.Can