'cannot switch or logon to another user to user' 'get BSOD '.

Similar Questions

• session remote desktop connection logon message: another user is currently connected to this computer

  I'm trying to figure out how to make a remote desktop connection without the user on the computer, as I log to get to kickoff. When I start the DRC while the other computer is in use, I get a message saying... session remote desktop connection logon message another user is currently connected to this computer. If you continue, this user should disconnect from this computer. Do you want to continue?

  Click Start / Help, then search for help on the "fast user switching".

• Cannot open program opened by another user

  original title: confusing 'Switch User '.

  I'm trying to open a program called ZoomBrowser EX (he is a Canon utility) and every time I get the message "ZoomBrowser EX is opened by another user.  "You'll have to switch users and close ZoomBrowser EX, before continuing" since I was the only "user", I never created on this computer, the statement is quite impossible. Suggestions?

  Try a right click on it > run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• cannot access the files of another user with the admin account

  I'm on a computer with Windows Vista 64-bit home problems.
  I normally have the computer configured to connect automatically to a non privileged user and rarely use the admin account.
  Recently, I downloaded an update (Finally, more like a relocation to the latest version) and realized that I need the admin account to install properly for all users that UAC would make things a royal PITA with a zillion prompts.

  I quickly disconnected and logged in as admin. Then, I realized that the installation file has been stored in the "downloads" folder in my regular account.
  Worse still, I could not access this folder, or I couldn't tab of future security. All I could do was to 'change the property' to my admin account, but I really didn't block me on these issues. Even from Explorer using "run as administrator" gave me problems, although the DIR command in cmd.com would be the list of people.

  I used the "change user" function to log my account regular and checked the Security tab and saw that the "Administrators" Group had already read and checked 'total control '. Why can't access the admin account? As an admin with XP, I had free access to everything I wanted to leave that I wanted.

  What happens if I was a parent and wanted to check to make sure that my child was not software piracy or download illegal music that would get stuck with the fines because I'm his guardian? How would I go about checking his records?

  What happens if I was an employer at a small office using working groups and wanted to ensure that the employee was not downloading pornography?

  How can I use the powers of the administrator to access other files (regular) user?
  Why do I still need to ask this question? It was automatic under NT, 2000, XP and the various servers at least as high as 2003.

  I found the problem, it was ANOTHER problem with Norton Security Suite for Comcast.
  I uninstalled and did not only to release 100 GIGABYTES of space, my boot time has been cut to a quarter of the former time, and this problem has disappeared.

• Cannot "turn on media streaming" - another user of Windows 7 with the same problem and the "suggested correction '' does not.

  This windows bug has been reported and 'responded' before by several people, but the "answers" do not work for me - and they do seem to work for a lot of people in this area and other forums.  I hope you can provide me with a real estate diagnosis, a reason for why this happens and a real solution that works for everyone.

  I'm trying to 'Turn on media streaming' in Windows Media Player so I can listen to my xbox and other home theater equipment.  The problem I have is the same problem as [of] other people have reported: in Windows Media Player, I press the turn on the 'link', the button greys streamin media shortly, but then nothing, and streaming is not enabled.

  I don't have a network problem.  I was able to extend Microsoft Media Center on my xbox.  (simply not enable streaming in WMP).  With media center extended is a large (better) workaround for the xbox, but this isn't a solution for my other home theater devices. I need to be able to listen to my receiver and blu - ray player, as I have done on my old PC running Windows XP.

  I have a fresh install of Windows 7 Pro, x-64 on a new machine of self-building.  Everything else works, it is not the machine.  I installed all the latest drivers for my machine.  I have all the updates for Windows 7.  I run the Windows Firewall and Kaspersky Anti Virus 2010.  I installed Microsoft Office 2007, Outlook 2007, Visio 2010 and many other applications 'standard '.  I'm not under any program of low-level "weird."

  As other people "suggested", already tried the action of the outgoing WMP, stop the Windows Media Player Network Sharing Service using service.msc, then by removing the .wmdb (and other files but not directories) by my dirctory users/xxx/AppData/Local/Microsoft/Media Player, restart the Service of network share WMP using services.msc and then restarting WMP.  This had no effect.  (I tried several times with and without having to restart WMP network sharing service manually.)  I tried to change the Windows Media Player Network Sharing Service, tab log (the default on my system) Network Service to Local System with "allow service to interact with desktop" chosen as someone another "suggested".  This does not seem to do anything.  I also tried to uninstall WMP and WMC player (using "turn Windows has or disable"), restart, then adding them and reboot.  This time this icon "turn media sharing on" returned in WMP (the icon is usually party WMP Stream/turn on media sharing window).  This time Windows 7 Pro thought a little longer before doing nothing.  (However, now I get a message error "an error has occurred. Not all features have been changed successfully. "in an attempt to"Reinstall"Windows Media Center after you have reinstalled WMP.)  The resettlement of WMC has returned an error.  I can no longer start Windows Media Center on my PC.

  So, by all posts on this topic, its obvious this is a real bug in Windows 7 (maybe?), (perhaps only on x - 64?).

  Just two more things on my setup... I did not initially set up homegroup (because I have no other Windows 7 machines), but I tried that implemented to see if it had an effect (it didn't).  The part only 'weird' of my installation, I mounted my D: drive (2nd hard drive) in C:\Users (because I use a Solid State Drive for the operating system on C: and don't want the user data on this subject).  This has not caused other problems, but I wanted to throw it out there in case Windows Media Player sharing is something weird here.  (And no, I'm not going to 'try to change' that, unless it is a known fact that that's the problem - and then I would need a different solution to move my user data off the coast of the SSD.)

  So please, let me know what is the real problem why it happened to me (I'm sure some people can turn on streaming in WMP), and what is the real solution.  (There seems to be a multitude of suggestions on the web for all kinds of different 'fixed', but which, if any, is the right one?)  Please do not just suggest things to try.  What is the right benchmark?

  Go to network and sharing center open view full map, right click on your PC and click on manage.

  then open services and applications, and then serivces and find Upnp device host, right click and click on reboot and make sure that it is set to automatic.

  Now scroll down to Windows Media Player Network Sharing service, do a right click and click on reboot and make sure that it is set to automatic also.

  It should work, it worked for me and everyone I know but... The only problem I have is when I restart my PC, the drive share Windows Media network service changes from automatic to automatic (delayed start) and I have to restart again the Upnp device host and Windows Media Player network sharing service.

  Other than having to do every time I restart my PC, it works perfectly.

  Also, if anyone has an idea of why it changes (delayed start) let me know thanks...

• Not able to open a session in Windows 7 message service user profile service does not logon and the user profile cannot be loaded

  the user profile service service has no logon and the user profile cannot be loaded. IAM not able to switch on the laptop. How to solve this problem?
  My laptop is Sony's new Vaio. Windows7. 4 GB of ram and 2.1 billion hertz processor with dual-core

  Hi ravichandrans36,

  Thank you for using Microsoft Windows forum.

  This error can occur if the group policy setting "do not connect to users with temporary profiles" is configured.

  To resolve this issue, follow these steps:

  1 delete the profile by using the computer properties dialog box. To do this, follow these steps:

  a. Click Start, right-click computer and then click Properties.
  b. click on change settings.
  c. in the System Properties dialog box, click the Advanced tab.
  d. under user profiles, click settings.
  e. in the user profiles dialog box, select the profile you want to delete, click on remove and then click OK.
   
  2. Click Start, type regedit in the start search box and then press ENTER.

  3. Locate, and then expand the following registry subkey:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  4 right-click the SID that you want to delete and then click on remove.

  5 log on to the computer and create a new profile.

  For more information, see: http://support.microsoft.com/kb/947215

  EDITING REGISTRY WARNING:
  Important:   This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Kind regards
  Aziz Nadeem - Microsoft Support

• "The service user profile Service has no logon. User profile cannot be loaded. "and new users are not created in the registry, that is it please help

  I am trying to create new users on my computer windows 8 but it dosent open, I get a message "the service user profile service has no logon. User profile cannot be loaded. "and new users are not created in the registry, that is it please help

  I had the same problem.  Get the «user profile service has no user of logan...» "I tried everything I found online and nothing has worked.  Then I reinforced to the back and looked at the whole picture.  It turns out that it wasn't a computer after all problem but a question of the user.  Under folder C:/users/default in the end I managed to delete all subfolders except appdata.  So when you went to create a new user he could not find the correct files to copy to the new profile to store information in.  To ensure that I had a correct records back into the C:/users/default folder, I went on another computer and just copy paste the new default folder from another computer in the folder users on my computer and erased mine.  Of course I could create my comments and new users account once again.  Finally.

• Cannot open the application "iTunes" because another user is open.

  I recently bought a new computer with vista. Installed iTunes on this computer and found that there is a problem between the two profiles on the computer. I run iTunes on my profile - but whenever my wife profile is active we are getting consistent error messages indicating "cannot open the application"iTunes"as another user, he has opened." Ask the other user to quit the application and try again.

  I need to keep itunes open in my profile - and anyway, why are they bent them in two profiles in Vista... we never had this problem under XP.
  I asked Apple for advice, and they suggested to install itunes in the second profile... which I did and said to reinstall/repair...which is not the goal... Apple then told me to contact Microsoft support as he would have to do with the admin files...
  Any advice pls.
  Thank you

  Find the Itunes.exe in the Itunes folder in Program Files.  Right click on the .exe / Properties / compatibility, look down at the bottom of this page for the 'privilege level' and check the box that says "change settings for all users.  In the heartbeat window according to the box that says "run this program as an administrator".  This can only solve your problem if you can both run under the same user name.

  When you run a program as an administrator you should get a quick UAC (unless maybe you have turned off UAC?

  To see the file extensions, you may need to go into Control Panel / folder Options / discovers, there you can uncheck "hide known file type.

• How to limit Ganymede user to logon to another device of base on the location profile group

  Does anyboby knows how to prevent a user from Ganymede to logon to another device? Our company has a manufacturing in many place around the world, and we wanted to keep all of our engineers based on their geographic location. For example engineers networks base on Asia is limited to access all devices located in the United States needs but we engineers access to all devices that are installed in different locations. I am using Cisco Secure ACS 5.3 and I am not able to do this. The test account I created which is belong to a specific group (i.e. ASIA) can connect to a set of devices that are located in the United States with read access but do not write access because of the restriction that I created. All I wanted is for this test user to block his access to these devices located in the United States.

  Well, lets assume that you have created two American and Asian communities

  you have defined two clients AAA US1 and Asia 1

  also, you have two identity of the groups USgroup and Asiagroup

  (1) If a user tries to access the peripheral USgroup Asia should be rejected

  (2) If a user attempts to access US Asiagroup device should be rejected as well

  other access

  If you need to customize the authorization policy in respect of the device admin access service

  to register the identity group and NDG:location where you can put in the result of the conditions

  What shell never set of profile or the command you want.

  Rule 1: Usgroup NDG:location y US grnat access to profiles of shell and command the necessary value

  Rule 2: Asiagroup NDG:location we Asia grant access to profiles of shell and set of commands necessary

  default: deny access

  ----------------------------------------------------------------------

  Please ensure good answers to rate

• I'm unable to download the updates for Adobe reader 10.1.1. Win 7 claims that I am connected as a guest when I am the administrator. disabled UAC and added another user still cannot update.

  I'm unable to download the updates for Adobe reader 10.1.1 victory win 7 claims I am connected as a guest when I am the administrator. disabled UAC and added another user still cannot update.

  Original title: win 7 claims I am logged in as a guest when I am the administrator. disabled UAC and added another user still cannot update.

  Here's how you can find your status:

  1. click on the globe to start, and then type the three letters cmd in the search box and press ENTER.

  2. Enter the following command and press ENTER:

  NET user "user %%nom.
  What do you see under "a Local group memberships?

• Error message: cannot download. License to make mistake.  License already filled by another user. Deleted digital editions and reinstalled.  Same error message unauthorized and Bill and got

  Error message: cannot download.  License to make mistake.  License already filled by another user.  Deleted digital editions and reinstalled.  Unauthorized and law and got same message

  The mistake of saying that the eBook are related to no other Adobe ID. You have opened the eBook until you authorize Digital Edition?

• Cannot save the document - read-only or opened by another user error occurs when the PDF is opened in Windows Explorer

  Adobe Pro XI - use the operating system to Windows 7 Pro

  When a PDF document is open in Windows Explorer, and pages are added, deleted, ratings, all types of changes, he cannot be saved until the Windows Explorer is completely closed.  If you try to save the document, you receive the error message next - "the document could not be saved.  The file may be read-only, or another user may have his opening.  Please save the document under a different name or in a different folder. «I have confirmed the document is not read only, it is not open by another user, and this is not open many times.»  Once completely, you close Windows Explorer and try to save the document, it saves without problem.

  Are there settings in Adobe Pro XI or Windows that allows you to save documents without closing Windows Explorer first?

  Thanks for any help you can provide.  This error is a frustration because I open all my documents via Windows Explorer.

  Turn off the preview in Windows Explorer.

• AlreadyLockedException: Cannot lock the file, another user holds the lock

  I created the client application to web service using Jdeveloper 11.1.1.7 and deployed on weblogic 10.3.6 on cluster consists of 3 servers. The task of the application is to extract the data from the DB and push application external server permanently. Everything seems fine and works applications. The problem is with some message logs on all three servers.

  I see the following stack of servers:

  oracle.jbo.AlreadyLockedException: Houston-26030: unable to lock the file, another user owns the lock. [[

  at oracle.jbo.server.OracleSQLBuilderImpl.doEntitySelectForAltKey(OracleSQLBuilderImpl.java:1105)

  at oracle.jbo.server.BaseSQLBuilderImpl.doEntitySelect(BaseSQLBuilderImpl.java:567)

  at oracle.jbo.server.EntityImpl.doSelect(EntityImpl.java:8589)

  at oracle.jbo.server.EntityImpl.lock(EntityImpl.java:6237)

  at oracle.jbo.server.EntityImpl.beforePost(EntityImpl.java:6756)

  at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:6943)

  at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:3301)

  at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:3106)

  at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:2108)

  at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2389)

  ........

  It is clearly stated that another process locks the record while the current process tries to lock the record even. Yet once obvious to say that the same application is deployed on three different servers (i.e. on the cluster) and each application tries to do the same task at the same time in each of the three servers with cluster.

  Question: It is healthy to ignore this error? or I have to solve out?

  I also checked this blog (Andrejus Baranovskis Blog: optimistic and pessimistic locking in Oracle ADF BC) he explains the difference between locking type available in the application model (optimistic and pessimistic). Will I change the lock mode in the request form for the client application that is mentioned to be optimistic rather than pessimistic? This will solve the problem? Is it OK to do with the behavior of the application who explained.

  I thought about this a bit more and would not use temporary tables. Because the ADF does not guarantee that a session database is still used by the same am it will be difficult to control.

  You can use a column in the table itself to write, for example, the name server that will manage the data before doing the real work.

  Our you will find further information in the table that allows you to balance the work using this in a query. Sample would be a column id that allows you to select only the tires where the modulo 3 id is equal to 0, 1, or 2. In this way, it would be pointless to write something on the table before proposing the line as each server would see only the lines it is supposed to work.

  Timo

• Impossible to uninstall Windows SteadyState or the opening of session "another user"...

  Hello, I recently tried Windows SteadyState to keep my PC to get banged by my nephew and my brother not so savvy in computer and download _ not knowing the source or if it has malware attached. in any case it was too complicated for me to understand, itself tried to uninstall it, it is not in the programs; used Revo Uninstaller, even deleted the files of the register... but it's ALWAYS THERE! I also tried to remove additional users added to the logon screen, to no avail... Any ideas?

  I am happy that we managed to get rid of these two files.  I installed SteadyState just to see what would happen and I also have another user on my login screen if it is not listed in the user accounts and so it cannot be deleted anyway, I know.  As long as it requires a name and a password (so not just anyone can get in), then I would probably just that it is--that's what I'll do (at least for now).  It is causing no harm and is secure.  You are probably right that SteadyState doesn't has not been uninstalled completely - perhaps reinstall it and uninstallling this new will do the trick.

  Alternatively, you can try posting in the SteadyState Forum: http://social.microsoft.com/Forums/en-US/windowssteadystate/threads to see if they have any ideas or suggestions.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I created a new Admin account and when I went to her, I got the message: "The service user profile Service has no logon. The user profile Service failed to load.

  I created a new Admin account and when I went to her, I got the message:

  "The service user profile Service has no logon.  The user profile Service failed to load.

  What's up with that?

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">