Similar Questions

• Cannot record audio streaming - only microphone listed as peripheral.

  I can't record audio streaming because there is only listed as device micro. I checked in the recording devices, see the disabled devices Show disconnected, but there is nothing except micro it (Realtek High Definition Audio). I downloaded and installed the latest drivers from the website of the manufacturer, nothing changes and I looked in the bios to see there at - it no audio devices listed and (perhaps off), but in the bios, I can't access anything except the date/time settings and password changes.

  Help! :)

  Hello JelenaJovanovic,

  Please provide the make and model of your PC. In addition, the record from the audio device or the stereo mix option is available if the sound card or audio device driver supports this option.

  You can check directly with the PC manufacturer to check if the PC audio device supports the registration of the aircraft.

  I hope this information is useful.

  Thank you

• cannot record audio streams in Win 8 pRO

  I can't save the audio streaming to Win 8 using any software... Sound forge (updated driver) Audacity (just installed as test) and your 'recorder '... They will all be the record of a microphone but not reading.  The file should be saved to HD and then it can be played using the media player... Also I can't use the built-in DVD/CD device, he continually tells me to insert a disk... My external HP dvd1040 works very well, but this is not the point...  These two problems may be related? ... In the Device Manager it tells me the CD/DVD unit is not plugged in and there is several HDMI and S/PDIF devices that show not plugged... From time to time, it (they) change... Sometimes, the Device Manager shows four items sometimes ten to twelve, more unplugged... Leave a clean install, not an upgrade, Vista (update, at the time), I have Win 8 Pro...

  Maybe your outdated software and is not compatible with Windows 8? Try this audio streaming recorder

  It works like a charm with Windows 8 and 10.

• Cannot record audio streaming

  I installed Windows 7 and now I can no longer record audio.  I have a card its Audigy CL, as well as two different (RIP Vinyl and Adobe Audition) recording programs.  I have read, but I can't or another program to record.

  Hello
  Welcome to the Microsoft answers site.

  Since when are facing this problem, wa it before?

  There is no Microsoft tool to record streaming audio, you will need to use a third party software.
   
  So, I suggest you to contact Web RIP Vinyl and Adobe Audition sites for better assistance
   
  Sound cards: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/sound-cards-frequently-asked-questions
   
   
  Thank you and best regards,
  Azam - Microsoft technical support.

• Same Audio Clip: "cannot synchronize one or more elements in the current selection because a match is not found.

  So I recorded a one-piece multicamera Setup.  I recorded audio separately from an external source.

  I turned view individual compisitions of each camera.  I then manually sync had my external audio by aligning alogn original audio wave forms.  Once I him I had lined up perfectly, I deleted audio of the original camera in the composition (to only use my external audio clip)

  I went and had already done with the same exact audio file for each camera view (in their own compositions).  I even standardized tham all to the same heights-6.  Thus, they are literally all of the same audio data.

  However, when I go to merge all of these compositions in a multicam composition (audio) via - I get this 'cannot synchronize' - which I don't really understand because I literally use the same audio clip on each of them.

  I tried to clear my cache of media and delete the cache files from media like another post said, but it was without result.

  Any reason, why this happens?  I tried to follow the channel 1, follow the channel 2, track down mix channel. all the same.

  Here's what to look like my comps:

  

  Ahhh I think I got it.

  Through Google more on this subject, I found an old post of you actually.

  That's your answer for someone else who sees this thread:

  In order to cut a multicam project using the multicam monitor, which is by far the simplest method, then you will need to use nested sequences.  There is no way around that.

  You can cut without the multicam monitor if you want, but I find it much less effective.

  There are different methods of creating a nested sequence multicam.  A large number of tutorials and even the focus of help file on the automatic mode, but I think it's lack and opportunity, problematic.  I prefer to do things manually.

  1. create a sequence corresponding to your images.

  2. Add the clips and synchronize them manually.

  3. create a second sequence corresponding to your images.

  4. the first sequence in the second nest.

  5. right click this sequence of nested, then select multicamera > activate...

  Thank you.  They have really should let more people know this method.  I thought the compiler auto was the only way to do it, I would rather manually this way

• How to transcribe audio streams in real-time text?

  Hello

  Currently, I listen to a live audio stream voice using Communicator Desktop WAVE on Windows XP. I want to use a voice-to-text application to transcribe this audio in Word or Excel in real time. I'm looking to reproduce the same experience as the direct subtitles on TV. I read that Windows is a speech recognition software and there are also 3 application of the part such as Dragon NaturallySpeaking. Is it possible to what I can achieve this?

  Thank you very much

  dambk.

  Hello

  The speech recognition software is not transcribe audio voice to text.

   
  You can search in your favorite search engine for the voice to transcribe text software.
  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also visit these links to learn more:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-speech-recognition

  http://Windows.Microsoft.com/en-us/Windows7/what-can-I-do-with-speech-recognition

• Not able to record audio streaming as "what you hear" option is missing from Windows 7.

  Original title: return to xp from w7 I need the internal registration option

  I bought a computer laptop compaq 615 with w7pro installed on it.  I have since discovered that for some reason any microsoft removed internal records "what you hear" function so I now can not record audio streaming and cannot also sound route from one program to another, which, as I'm involved in music, is something I have to do.  for example, I wanted to send audio from ableton live to visualjockey but w7 doesn't let me do that. I wanted to also allows you to record with camstudio but w7 will not realize any record audio.  It seems really stupid and now I can't do a lot of things I used to do on my old laptop with xp

  is there a way to get around this? I'm using the latest drivers.  If I reinstall xp on this laptop is going to find the "what you mean the feature? or y at - there a patch or something that I can use Microsoft?

  Thank you very much

  
  

  My understanding is that stereo mix is only available on some sound cards. You can try the steps on this wire to turn on the stereo mix:
  http://social.technet.Microsoft.com/forums/en-us/w7itpromedia/thread/73415150-ec9b-44EA-8119-a2ea4f901ca0

  If you don't see it after showing devices disabled and disconnected, it is possible that an update of the driver of the manufacturing may add this feature in the future.

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Multiple audio stream switching in Win7/WMP12

  Hello.

  I have a bunch of home movies I took with a 1394 camera and recorded on the PC.  I have used DivX to compress these films and my wife overlay a second audio track of Chinese for Grammy can watch movies.

  Previously, I used WMP 9 to play movies and used Morgan Stream Switcher to allow audio to pass (it was quite a thing to learn at the Grammy Awards to right-click).

  Now with Win7 and WMP12, I don't know how to change the audio stream.  Reading, two audio streams are superimposed and I hear Chinese and English both at the same time.   I googled around the internet and binged this site and do not have too much success, just stuff of DirectX, but nothing useful.  It seems that Morgan stopped supporting its flow selector in WMP10, so I don't know if it works or not, or is now by WMPv12 there is finally an embedded solution.  There is another shark codecs pack that seems to resolve the issue, so this may be a limitation of codec in Win7/DirectX/Wmp12.

  We'd appreciate clues.

  Hi DumasaRock,
  
  There are several third party plugins to tour the market. You may need to search for a third-party plugin using your favorite search engine and support for the codec to go with it because there is no embedded solution to Windows Media Player 12 on this issue.
   
  Just as there was Morgan Stream Switcher to allow the passage of audio streams in Windows Media Player 9 with Windows XP, I'm sure there will be a third-party plugin for this one as well.
   
  NOT MS. LINK:
  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.
  
  See also:
   
  WMPlugins.com : http://windows.microsoft.com/en-US/windows/downloads/wmplugins
   
  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Aziz Nadeem - Microsoft Support

• Sound preview audio stream starts beginning rather than at the current position in the timeline

  I have an audio stream which I'm doing an animation. After working for a while, especially later in the video (like 2 minutes or more). audio will not play at the position, I'm in the workspace and rather play early instead. It is therefore impossible to work efficiently synchronize audio animation.

  I tried with several computers and sound cards, and I get the same behavior.

  What is going on? Is this a known bug?

  Yes, it is a known problem in Windows. I have reason to believe that it will be corrected in the next update to Flash Pro. Don't know when this will be.

• Audio streaming on the entire folio

  We have a customer who is interested in the creation of a 'radio' function, where we would have audio stream through the entire folio. The desired effect would be that audio play continuously and without interruption on each page of each article.

  I know that there is a way to read a local audio file across the entire folio. We have already tested which and it should work perfectly, but the customer would like the audio streaming on the internet because we cannot have the rights to incorporate audio files.

  Do you know if there is a provision to do something like that Adobe DPS? We heard that it might be possible using a set more like managers of browser, but I was unable to find any documentation about it.

  iPad only.

  We do not support creation of audio and video streams using the DPS, creative tools for the moment. There is no way to do it with an overlay of web as the overlay will get deleted from memory once that your player moves to another article.

  Neil

• Synchronization of streams during playback

  Hi anyone know of a good way to synchronize recorded (video/audio) streams separated during playback?
  
  For example takea videoconferencing app; I can can record each stream separately, but the playback is at - it something I can do to force them to be synchronized? Reading autour, it seems that the answer is "no"... Any thoughts?

  Unfortunately, that you have found your reading is it pretty well. There is no way to synchronize the flow of reliable FMS.

• OS Sierra: Cannot play audio via bluetooth are involved during airtime

  Cannot play audio via bluetooth speakers during airtime to my TV.

  Has been able to do before the OS Sierra update. Now if I switch to my bluetooth receiver in the system prefs-> sound-> menu "exit" it disconnects completely airplay. This happens both with mirroring and use as a separate display.

  Is there something that I am missing on the behavior of this feature? Or is this a bug in the new OS?

  Mac OS Sierra worm 10.12

  MacBook Pro (13 inch, early 2011)

  I have a similar question, with the siera update I can no longer audio to my bluetooth headset output, they are connected but do not appear in the list of audio output. :///

• iTunes says "cannot read the stream" HELP!

  Here's my workflow: <? XML version = "1.0" encoding = "UTF-8"? "" "> <!-generated by the server of the Site v6.0.0 - 8428-8428 (http://www.squarespace.com) on Monday, July 25, 2016 22:14:44 GMT-> < rss xmlns: content ="http://purl.org/rss/1.0/modules/content/"xmlns:wfw ="http://wellformedweb.org/CommentAPI/"xmlns:itunes ="http://www.itunes.com/dtds/podcast-1.0.dtd"xmlns ="http://purl.org/dc/elements/1.1/"xmlns:media ="http://www.rssboard.org/media-rss"version ="2.0"> < channel > < title > Blog - In My Mind < / title > < link >http://eric-hyde.squarespace.com/ blog-1 /< / link > < lastBuildDate > Monday" 25 July 2016 22:05:11 + 0000 < / lastBuildDate > < en language > < / language > < generator > Site-Server v6.0.0 - 8428-8428 (http://www.squarespace.com) < / generator > < description > < / description > < point > < title > in my mind Podcast - Episode 2 < / title > < DC: creator > eric hyde < /DC: creator > < pubDate > Monday 25 July 2016 22:12:22 + 0000 < / pubDate > < link >http://eric-hyde.squarespace.com/blog-1/2016/7/25/in-my-mind-podcast-episode-2< / link > < isPermaLink guid = "false" > 578f9e71d482e984acfc40a5:57968abb893fc0793b0f659c:57968d17725e2587d1b49765 < / guid > < description > <! "[CDATA [" < a href = "http://eric-hyde.squarespace.com/blog-1/?format=rss" title = 'Blog RSS' class = "social-rss" > RSS Blog < /a > "]] > < / description > < / item > < point > < title > in my mind Podcast - Episode 1 < / title > < DC: creator > eric hyde < / DC: creator > < pubDate > Monday 25 July 2016 22:04:27 + 0000 < / pubDate > < link >http://eric-hyde.squarespace.com/blog-1/2016/7/25/in-my-mind-podcast-episode-1< / link > < guid isPermaLink = false"> 578f9e71d482e984acfc40a5:57968abb893fc0793b0f659c:57968ad95016e117f189c426 < / guid > < description > <! [CDATA ["< a href ="http://eric-hyde.squarespace.com/blog-1/?format=rss"title = 'Blog RSS' class ="social-rss"> RSS Blog < /a >"]] > < / description > < / item > < / channel > < / rss >

  I use squarespace, which checks, I don't know what else is wrong and I'm losing my mind.

  Thanks for posting the URL of your feed: display its content does not allow me to diagnose the problem, but first you have no. ' itunes:...' tags and so no ' ' tag, which allows you to get rejected - however which would not cause the error 'cannot play your stream.

• range poor when bluetooth audio streaming

  My Macbook 2015 beginning has brought very poor when audio streaming to bluetooth speakers. my laptop should be in 1-2meters for clear sound without interruption. the most and jump in and out sounds like and scratched old CDs. not in any wall or something just to work from one end of my room the other maybe 3 meters... I have a bar of his sony with streaming audio bluetooth and one pill of beats the range is compatible with the two speakers. If I use my iPhone 6 paired with the same speakers the beach is really good 6 + meters... I've already had the laptop replaced from jbhifi for this problem and the replacement is identical. have apple cheeped out on the inner workings of bluetooth on this model?   I was wondering if anyone else has similar problems of bluetooth with these new MacBook?

  No, my bluetooth works fine. I can even run around the House with my bluetooth headset. I could say, mine is 20 meters. Not sure, but I can go very far with it

• Why I get this error message: error while trying to synchronize audio and midi?

  I just updated Logic Pro and all of a sudden my lexicon alpha interface does not work correctly.  I get this error message: error while trying to synchronize audio and midi. Check for conflicts between Logic Pro and the external device. Help

  Start by making sure that the project in logic settings are set correctly - I think that the lexicon only supports 44.1 or 48.

  If it is software used to Setup place the lexicon make sure you that the sampling frequency is set to the same logic.

  Sometimes that power and the lexicon solves the problem...

  If none of the help above - make sure you use a multi-out or comprehensive audio device (OS X)