Cannot uncheck several updates in the same category.

Similar Questions

• Cisco ASA cannot create several tunnels at the same address in hand?

  We have several remote sites with Linksys WRVS4400N and Smoothwall firewall/vpn devices.  I need these sites to be able to connect to several tell-contiguous subnets to our main office.  This was done easily with smoothwall and linksys.  You create a separate tunnel for each subnet, and voila, you're done.  However, when I tried this with our ASA newly installed, it won't let me create several tunnels at the same address of the remote peer.  It is a problem because these sites have only a single IP address public static.  Did I miss something or ASA not allow connections to and from multiple subnets form a site with a unique address peer?

  Resembles the limitation on the WRVS4400N as Cisco ASA supports several subnets by tunnel.

  Is there anyway that you can configure a subnet more instead of specific subnets on the ACL?

  For example:

  If you 192.168.0.0/24 and 192.168.1.0/24, instead of having 2 subnets configured, you can combine them into 1 subnet 192.168.0.0/23

• Several updates on the same Table

  Hello
  
  I need to update the same Table (T1) but to filter for different conditions as below.
  and I have a set of filter conditions 50 and update the same table.
  
  Is it possible to get in the single update statement?
  
  BEGIN
  UPDATE T1
  SET PTA_CLM_CNT = v_PTA_CLM_CNT__77,
  PTB_CLM_CNT = v_PTB_CLM_CNT__77
  WHERE run_dt = v_in_parm_dt
  AND state_code = '77';
  EXCEPTION
  WHEN NO_DATA_FOUND THEN
  null;
  WHILE OTHERS THEN
  v_error_cd: = SQLCODE;
  v_error_msg: = SUBSTR (SQLERRM, 1, 200);
  v_curr_record: = 'sum_bene_state_updt_77 ' | v_in_parm_dt;
  create_error_log ('_sum_cnts', v_error_cd, v_error_msg, v_curr_record);
  END;
  
  BEGIN
  UPDATE T1
  SET PTA_CLM_CNT_ = v_PTA_CLM_CNT__78,
  PTB_CLM_CNT_ = v_PTB_CLM_CNT__78
  WHERE run_dt = v_in_parm_dt
  AND state_code = '78';
  EXCEPTION
  WHEN NO_DATA_FOUND THEN
  null;
  WHILE OTHERS THEN
  v_error_cd: = SQLCODE;
  v_error_msg: = SUBSTR (SQLERRM, 1, 200);
  v_curr_record: = 'sum_bene_state_updt_78 ' | v_in_parm_dt;
  create_error_log ('sum_cnts', v_error_cd, v_error_msg, v_curr_record);
  END;
  
  Thanks in advance

  May be trying to use DECODE

  UPDATE T1
     SET PTA_CLM_CNT = DECODE(state_code,77,v_PTA_CLM_CNT_77,78,v_PTA_CLM_CNT_78)
         PTB_CLM_CNT = DECODE(state_code,77,v_PTB_CLM_CNT_77,78,v_PTB_CLM_CNT_78)
   WHERE run_dt = v_in_parm_dt;
  

• Why Windows asks me to install the same updates several times. Often several times the same updates and often several times in the same day?

  I install security updates and important. Sometimes in the same day, I wonder to install the same updates. When I check the history I see that they are already installed. This can happen several times in the same day.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  UTC/GMT is 00:34 Sunday, March 11, 2012

• Several blocks of the same canvas and window update

  Hi all
  
  I want to update several blocks from the same canvas and the window. I also want to find an alert before saving the data. Based on the current record, I want to update only
  data in the record.
  
  Can you help me anyone in this regard.
  
  Arif

  You must write the validation key trigger to the block level

  I don't think so. As it is not possible to hire only a single block, what would be the use of a KEY VALIDATION trigger at the level of the block? The only effect would be that the shape has according to different where the cursor is positioned.

  If you want the dynamic Blockname (and all blocks of share the same fields that you are filling), you can do something like

  if show_alert('ALERT_TO_VERIFY')=alert_button1 then
    COPY('3', :SYSTEM.TRIGGER_BLOCK || '.REC_STATUS');
    COPY('P', :SYSTEM.TRIGGER_BLOCK || '.TASK_STATUS');
    COPY('P', :SYSTEM.TRIGGER_BLOCK || '.PERMISSION_UPDATED');
    commit_form;
    execute_query;
  end if;
  

  BTW... Why is - that update you the block after commit?

• Updated Windows cannot currently check updates, because the service is not running. You may have to restart your computer

  Original title: Windows Update problem, help please

  Whenever I go to windows update, it says "Windows update cannot currently check updates, because the service is not running. You may have to restart your computer"I restarted my computer, but the same message back steadily for several weeks. How can I fix?

  Thank you

  Hi Lydia,.

  There are three services that are important to check, download and install the updates. These services are Background Intelligent of cryptographic services service and the Windows update Service. These should be in the started state and currently running on the computer so that the computer connects to Windows Update Server, check the update that corresponds to the computer, and then download them accordingly.

  Follow the steps in http://support.microsoft.com/kb/2730071 and make sure that these services are started on the computer. If they are, then if he please stop and then restart the services. Restart the computer once that change in services.

  It will be useful.

• Change the location of several pictures at the same time?

  I see how to change the location of a photo at a time. Is it possible to change the location of several pictures at the same time?

  Thank you

  Phil

  Select the photos and info - enter the location (or any other field of the info) and it is applied to all photos

  This is described in using Photos - a good place to get help with Photos

  View and add information about the photos

  To view or change information for the photos, you select one or more photos, and then open the information window.

  

  • Open the Info window: Double-click a photo to view it, and then click the Info button in the toolbar or press on command I.

  • Add or change information: Change the following.
    • Title: Enter a name in the title field.
    • Description: In the Description field, type a caption.
    • Favorite: Click the Favorites button to mark the photo as a favorite. Click the button again to deselect.
    • Keywords: Enter the keywords in the keywords field. When you type, Photos suggest keywords that you have used before. Press enter when you have finished a keyword. To remove a keyword, select it and press DELETE.
    • Faces: Click on and type a name to identify a face. Click on several times, and then drag the identifier of the face different faces to identify many faces in a photo.
    • Location: Enter a location in the location field. When you type, Photos suggest places you can choose. To change a location, you can search a different location or change the location by dragging a PIN on the map. To remove location information, delete it or choose Image > location, then choose Remove location or back to the original location. You cannot assign a location if your computer is not connected to the Internet.

  LN

• Safari address bar showing several addresses at the same time

  Anyone else having problems with the address bar. No work to present frequently visited sites and and after visiting the sites manually or via Favorites addresses are crushed between them (showing several addresses at the same time).

  I have the same problem since this morning, after the EL CAPITAN update

• Windows update - reappear the same updates

  I have Windows 7 Pro. During the last three months updates continued to appear. I downloaded and installed several times. They appear in my update as a success story, but then when the auto update tuns, the same three will appear again. Three updates are:

  • Update for Windows 7 for x 64-based systems (KB3068708)
  • Update for Windows 7 for x 64-based systems (KB3035583)
  • Update security for Windows 7 for x 64-based systems (KB3046269)

  Anyone knows what is the cause?

  The first two in your post have a goal - to 'upgrade' from your computer to Windows 10.  If you don't want Windows 10, there is no need them for sure.

  Change your Windows Update settings for EVER, and this doesn't continue to happen.

  As for the third: https://support.microsoft.com/en-us/kb/2509997

• Several files with the same name.

  Cannot publish to Business Catalyst because of a fatal error, where it is said "why do we have several files with the same name?  The website and all its contents have not changed in more than a year with the exception of minor changes to the wording so unable to understand what the error is encountered. Are there not better misdiagnosed at one point less for the files in question.

  The problem is the result of a mixture of case-sensitive and case-insensitive between how files within the .oam are put into interaction with and what is written in the muse_manifest.xml file during a re - download full compared to an incremental download.

  If all .oam packages files are tiny and the original .oam were replaced in Muse with the all new tiny .oams, then you should select Upload: publish all the files in the dialog box Options. From there, forward publication of incremental changes should work without errors.

• Return of the mistake of MUSE: why do we not have several files with the same name?

  Well - I thought I had all this worked and fixed, but I met the download error 'Why do we have several files with the same name' once again.  (I downloaded all the files several times today in order to 1) works the way it worked the last time and 2) get an OAM file that is not loading for some reason any load again and the download takes about an hour to transfer all the files manually.

  To recap:

  (1) an option "Upload only modified files" returns the 'Muse has encountered an error and closes.  Why do we have several files with the same name? "error just as before.

  (2) a full download will work but takes forever and is NOT a substitution for work changed files option.

  Please advise with possible solutions!

  -Dave

  Is it possible to have two .oam different files in different folders on your computer where the .oam files have the same name? I'm theorizing that there may be a bug in the treatment to ensure the folder created for a .oam placed on the server receives a unique name, particularly in the case of a partial update of the site on the server.

  Please send us the .muse file and all the files in .oam related to [email protected] along with a link to this topic for the context so we can attempt to reproduce this error and isolate the root cause. If files are larger than 20 MB, you'll need to use a service such as Adobe send & Track, Dropbox, creative cloud, WeTransfer, etc. file sharing. Thank you.

• If I buy the adobe cc then can I use it on several laptops at the same time? I use two different computers for my work. as a photoshop and illustrator, for example.

  If I buy the adobe cc then can I use it on several laptops at the same time? I use two different computers for my work. as one for photoshop and Illustrator for example.adobe

  This excerpt from: terms of conditions of use Adobe software should help to clarify the terms for you:

  ..... You can activate the software on up to 2 devices (or virtual machines) at the same time, if these activations are associated with the same Adobe ID for the same person, except http://www.adobe.com/go/activation_fr. However, you cannot use the software on these devices simultaneously.

  You can also see:FAQ: where can I find the terms of membership and the terms of use?

• How do you install the creative cloud on several computers using the same license?

  How do you install the creative cloud on several computers using the same license?

  Installation on multiple computers can be done independently of the subscription.  You only need the lic3ense when it comes to activation, you have two active facilities (signed in).  Just install the desktop application and use it to install the applications, and then connect to activate.

  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

  Creative cloud to desktop
  https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

  Sign out, sign in | Creative office cloud app
  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  Help of activation & deactivation
  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#a ctivate-how-to's

  Install, update, or uninstall applications
  http://helpx.Adobe.com/creative-cloud/help/install-apps.html

• [ShareIt] I hope that ShareIt can share the files on several receivers at the same time.

  If ShareIt can share the files on several receivers at the same time, it will save a lot of time for me when I want to share files with a group of friends.

  Good idea.

  He will be brought back to the development team.

• How can I install El Capitan on several computers at the same time?

  I live in Spain, where I have a few computers to service. The internet lines here are slow and unstable, so it is difficult to get all of the updates in without entering the trail other activities.

  I wonder if it is possible to download El Capitan on a single computer and then distribute to others, after which I can update at the same time am.

  Would this be possible?

  According to the license agreement, the license of the OS is for you only, but you can install on any computer YOU own and control. So if download you it and then reject the Setup program before you start, you can find it in your Applications folder from where you can copy it somewhere safe to use on another computer that you own.

  Because the download is linked to your Apple ID, use it on another computer does not work as it should download it using their own Apple ID or they will never be able to reinstall or update that the used ID does not correspond to their.

  And, since you said you 'service' of computers, you will need to look at another type of license - you will need to contact Apple. The retail license is nothing for you.