Cisco ASA cannot create several tunnels at the same address in hand?

Similar Questions

• Several Tunnels with the same distance network & destination in cryptographic maps

  This maybe a newbie question, but I don't have production systems and don't really have a way to test our properly. We have an ASA 5520 with several tunnels from site to site. We already have a tunnel with one of the remote networks in 10.100.90.14. We have this IP on a subnet configured as remote network and the destination address in the card encryption. We also exempt rules NAT in place for our local network with the 10.100.90.14 address as the destination.

  We have another tunnel that must be built and who will have a different address peer, but that requires a large number of subnets and at least we'll have the same remote network/destination address in the map encryption and VPN tunnel that we already have in place.

  Is this possible to do with a tunnel of site to another without a static or dynamic NAT to a different IP address?

  I know, with physical networks, that it is impossible because of the static routes that are in place, but with the ipsec tunnels I'm not sure how it works, and as mentioned, I'm not able to test it.

  Any guidance would be appreciated.

  Bill

  The acl crypto map defines interesting traffic. If you have the same destination IP address, IE. 10.100.90.14 then if the source IE. the IP address of the client on your network is identical for the two tunnels, then no, it won't work and you will need to make some sort of NAT for one of the tunnels.

  Jon

• Cannot uncheck several updates in the same category.

  I would have thought by now that all changes (no doubt excellent) Windows Update for Vista, that something would have been made with respect to the Active-X for XP.

  They can? I guess.

  Will they? I doubt it since WinXP SP3 is in Extended Support.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• 2 VPN tunnels on ASA common; A PRI a BKP at the same address-end peer

  Hi all

  I have an ASA 5505 branch that has 2 circuits ISP.  I have a data center ASA who has 1 ISP circuit. I have a VPN tunnel between the primary circuit ASA branch and the ASA circuit data center.  I would like to implement the ASA branch for the redundancy of the SLA so I can use primary and backup circuits, but two configs tunnel going to the same address-end peer, since the data center has only 1 ASA. I read that an ASA cannot have several tunnels to the same peer address because the ASA may have 1 SA by peer address.

  However, if I have my branch ASA configured for redundancy of the SLA, then only 1 tunnel would at once, which I think would affect the requirement of SA above.

  Can someone tell me if this is possible?

  Thank you.

  Hi Dean,

  You're right about things als because only link will be active at a time.

  On the ASA branch, you can apply the same encryption card to two primary and secondary circuit. You use just ALS to determine how this ASA branch will reach the address of peer card crypto (IP addr of ASA Data Center).

  I wrote an article about a similar scenario here: http://resources.intenseschool.com/using-vpn-tunnels-as-backup-links-primary-and-backup-vpn-tunnels-on-cisco-asa/

• System Restore cannot create restore, point because the "shadow copy provider had an unexpected error." What can I do?

  Have a Dell Inspiron 1545 with Vista.  System Restore cannot create restore, point because the "shadow copy provider had an unexpected error."   What can I do?

  Hi JamesParwulski,

  Method 1
  I suggest you to scan SFC.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7.
  http://support.Microsoft.com/kb/929833

  Method 2
  I suggest you perform a checkdisk.

  Check your hard drive for errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

• Cannot create a partition during the installation of Windows 7

  When I want to create a new partition on the unallocated space during the installation of Windows 7 in custom option on that I enter the size of the partition size I wanted and click apply, but nothing happens and cannot install Windows 7, but the same thing can be done by my old Windows XP CD. My computer is Dell Inspirion - 620... When I was clicking on an already partitioned space to install, error message is that there was not much free space in partitioned space was similarly if I formatted the partition of 75 GB and all 75 GB of free space and so on showing the screen.

  Try to increase the size of the partition and see what happens.

  Windows 7 would probably work on a 75 GB partition, but you will run out of space real fast at that size. A minimum of 120 GB would be better.

  Another thing you could try is to simply create a major score for the entire disk, then after you have installed Windows, go to "disk management" and create your other partitions.

  Personally, I don't see what good it does to have multiple partitions on the same drive. If the drive fails, all of your partitions went anyway.

• Cannot create an instance of the java virtual machine

  Hi when I try to launch my sql developer get this error

  Cannot create an instance of the java virtual machine located in the path C:\Program Files\Java\jdk1.6.0_38\jre\bin\client\jvm.dll, but I do not have the file in the location

  I'm trying to do

  BI CHAOS: SQL Developer: cannot create an instance of the Virtual Machine Java

  Cannot create an instance of the Virtual Machine Java

  but am not able to locate file product.conf in my machine
  

  OK, we lost time because you said never explicitly release of SQL Developer in use, and then, when I deduced this wrong, you went right with it, rather than correct me.  Remember the line from Blade Runner when Harrison Ford hits Rutger Hauer in the head with a pipe?  Than hurt!

  Anyway, since the last post (because of the osgi references in the file ide.conf) I see that you are using a version 4.0.x of SQL Developer.  You must update the file product.conf with the smallest Xmx value in order to create an instance of the JVM.  If you have not yet found the product.conf file on your system, this might help: http://www.thatjeffsmith.com/archive/2013/12/oracle-sql-developer-4-windows-and-the-jdk/

  Otherwise, ask someone in your organization COMPUTER help - keep in mind that AppData is one of those hidden Windows directories, so you'll have to tell explore to make it visible by the organize > Folder Options > view > hidden files and folders parameters.  In addition, you should use Java 7, not Java 6 - try to get that upgrade to the latest version of jdk1.7.0_xx (currently 60, I think).  Since you never said if your JDK is 32-bit or 64-bit, I can not say to use an AddVMOption, Add32VMOption or Add64VMOption.

  Best wishes

  Gary

  Post edited by: Gary Graham

• Cannot select several windows in the taskbar.

  In Windows XP, you may hold down the CTRL key and select multiple windows, then right-click on one of them and choose close, which would close all save time and clicks.

  However, in Windows 7, you cannot select multiple windows at the same time using CTRL.

  Is there a logical reason for it?

  Is there an alternative?

  With the redesign of the taskbar, les ingenieurs engineers included a method to close all windows of a particular program.  There is however no more multiple-selection.  You can always do this by pressing Ctrl-Shift-Escape and then using Ctrl-click to select and close the windows of this list of programs.

  However, there is no alternative to the taskbar.

  For additional reading on technical and creative process that went into the design of the new taskbar, see the Engineering Windows 7 blog by the developers themselves, to http://blogs.msdn.com/e7.

  If it solves your problem, click on the link "Propose as answer" below and vote as useful by clicking on the green triangle for the lelft. Thank you!

• Change the location of several pictures at the same time?

  I see how to change the location of a photo at a time. Is it possible to change the location of several pictures at the same time?

  Thank you

  Phil

  Select the photos and info - enter the location (or any other field of the info) and it is applied to all photos

  This is described in using Photos - a good place to get help with Photos

  View and add information about the photos

  To view or change information for the photos, you select one or more photos, and then open the information window.

  

  • Open the Info window: Double-click a photo to view it, and then click the Info button in the toolbar or press on command I.

  • Add or change information: Change the following.
    • Title: Enter a name in the title field.
    • Description: In the Description field, type a caption.
    • Favorite: Click the Favorites button to mark the photo as a favorite. Click the button again to deselect.
    • Keywords: Enter the keywords in the keywords field. When you type, Photos suggest keywords that you have used before. Press enter when you have finished a keyword. To remove a keyword, select it and press DELETE.
    • Faces: Click on and type a name to identify a face. Click on several times, and then drag the identifier of the face different faces to identify many faces in a photo.
    • Location: Enter a location in the location field. When you type, Photos suggest places you can choose. To change a location, you can search a different location or change the location by dragging a PIN on the map. To remove location information, delete it or choose Image > location, then choose Remove location or back to the original location. You cannot assign a location if your computer is not connected to the Internet.

  LN

• Several files with the same name.

  Cannot publish to Business Catalyst because of a fatal error, where it is said "why do we have several files with the same name?  The website and all its contents have not changed in more than a year with the exception of minor changes to the wording so unable to understand what the error is encountered. Are there not better misdiagnosed at one point less for the files in question.

  The problem is the result of a mixture of case-sensitive and case-insensitive between how files within the .oam are put into interaction with and what is written in the muse_manifest.xml file during a re - download full compared to an incremental download.

  If all .oam packages files are tiny and the original .oam were replaced in Muse with the all new tiny .oams, then you should select Upload: publish all the files in the dialog box Options. From there, forward publication of incremental changes should work without errors.

• Return of the mistake of MUSE: why do we not have several files with the same name?

  Well - I thought I had all this worked and fixed, but I met the download error 'Why do we have several files with the same name' once again.  (I downloaded all the files several times today in order to 1) works the way it worked the last time and 2) get an OAM file that is not loading for some reason any load again and the download takes about an hour to transfer all the files manually.

  To recap:

  (1) an option "Upload only modified files" returns the 'Muse has encountered an error and closes.  Why do we have several files with the same name? "error just as before.

  (2) a full download will work but takes forever and is NOT a substitution for work changed files option.

  Please advise with possible solutions!

  -Dave

  Is it possible to have two .oam different files in different folders on your computer where the .oam files have the same name? I'm theorizing that there may be a bug in the treatment to ensure the folder created for a .oam placed on the server receives a unique name, particularly in the case of a partial update of the site on the server.

  Please send us the .muse file and all the files in .oam related to [email protected] along with a link to this topic for the context so we can attempt to reproduce this error and isolate the root cause. If files are larger than 20 MB, you'll need to use a service such as Adobe send & Track, Dropbox, creative cloud, WeTransfer, etc. file sharing. Thank you.

• If I buy the adobe cc then can I use it on several laptops at the same time? I use two different computers for my work. as a photoshop and illustrator, for example.

  If I buy the adobe cc then can I use it on several laptops at the same time? I use two different computers for my work. as one for photoshop and Illustrator for example.adobe

  This excerpt from: terms of conditions of use Adobe software should help to clarify the terms for you:

  ..... You can activate the software on up to 2 devices (or virtual machines) at the same time, if these activations are associated with the same Adobe ID for the same person, except http://www.adobe.com/go/activation_fr. However, you cannot use the software on these devices simultaneously.

  You can also see:FAQ: where can I find the terms of membership and the terms of use?

• When selecting several fields of the same type why tab formatting does not appear in the properties?

  Creating pdf with lines Qty and total order forms, I want to format the fields as number with 0 decimal places for the qty column and the sign $ and 2 decimals for the totals column.

  Why when choosing several fields quantity, then go to properties, the format tab disappear? Why do I have to choose and the format of each field one at a time? They have the same type of field.

  I'm working currently on a document with more than 200 fields are most of the quantity fields and others are total fields. I right click on each field individually.

  It's 2015! Can you imagine if Excel did it?... Adobe WTF?

  Only the Adobe developers can answer why it is like that, but it's unfortunately.

  The only solution is to use a script to set the Format setting for several fields at the same time.

  I developed such a tool, so if you are interested you can get it here: Scripts custom Adobe: Acrobat - Format applies to several text fields

• XOQ-01950: Cube contains several BuildSpecifications with the same name.

  Hi all
  
  When executing the option to maintain Cube he throws under question: any clue?
  
  XOQ-01950: the AWCubeOrganization for cube 'NN_OLAP_POC. MARKET_SALES_CUBE"contains several BuildSpecifications with the same name.
  
  Thank you
  Exq

  This error should show only upward when you create a cube (by importing XML), not when you maintain. So, I'll assume that's what you hear.

  If you are importing XML that references an OLAP object that already exists, whereas the new definition replaces the old. The only exception to this rule is the BuildSpecification object. This kind of object is called, but it does not follow these conventions (for reasons of disorder of implementation). If you import the XML code that has a BuildSpecificaiton with the same name as one that already exists, then you will trigger the error you see. Here is a relevant example of XML.

  The solution is to remove this section from the XML before importing it.

• Several versions of the same project AE Premiere Pro crash

  Hello!

  I guess this should be possible, but it seems that I do something wrong.

  I am a first Pro CS5.5 project. This is a tutorial how-not - to the that I use as an example of project to get myself started in CS5.5 AE with the body.

  Now... between the clips I want to first pro to show screens as "Lesson 1: when you don't...' then a video clip, then ' lesson 2: when you... don't ', then another clip video example." Etc...

  However, it would be nice if these screens of text between the two were animated. So I am doing a project in AE called "Lesson1", save it, just to make the text lively between the two.

  Import of the body: nice.

  Now, I would like to make the animation 'lesson 2'. I want he comes alive as in Lesson 1. So I have open project Lesson1, change the text and save it as AE project "Lesson 2. In this way, I don't do any what animation again.

  This would be the way simple, right? Instead of having to copy everything or instead of save settings predefined.

  
  It does not work.

  For some reason any body (even if AE is saved and AE is closed) now words together projects. Lesson1 indicates Lesson2 or Lesson3. It seems that AE projects are registered under different names, organization always check the versions published as an edited version or the original, with the exception of the version I want to show him.

  At some point, this will crash body or AE.

  I'll start trying to make different compositions in the same project, maybe that will work. However, why it works that way?

  Thank you

  Your workflow is a bit wonky. Here's the right way to use the AE projects within a timeline of the Organization:

  1. Select the clips you want to process in After Effects
  2. Right-click on any of the selected clips and select replace with After Effects Composition
  3. AE opens, save the project file, and then change the composition created with Dynamic Link.
  4. Do not close AE.
  5. Repeat for as many clips you need to treat in AE.

  It is always better to end up with an AE project incorporated into a chronology that integrated a lot of AE projects. I guess the crash is a dynamic link is trying to access several projects at the same time. Dynamic links can handle a handful of compositions far better that he can manage a handful of projects in the same timeline.