Cannot update a single display field when writing the record in the database

Similar Questions

• Error codes: Code 80070005, I cannot update Windows... I used the Unility FixCleaner but I still get the same error message. How cal I solve this problem?

  Error codes: Code 80070005, I cannot update Windows... I used the Unility FixCleaner but I still get the same error message. How can I fix?

  http://social.technet.Microsoft.com/forums/en/itprovistasetup/thread/95edbee4-a75c-48AD-91D1-5316a96f9567

  http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.windowsupdate&tid=1ab369b4-7d27-4951-8047-09c861ff5bc1&cat=en_US_d02fc761-3f6b-402c-82f6-ba1a8875c1a7&lang=en&cr=&sloc=en-us&m=1&p=1

  See if the information above solves the problem.

  If this is not the case, try the Windows Update Forum, the link below:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• CompactRIO RT (:-65589) error code: error or warning occurred when writing the following shared Variable)

  Hello

  is anyone know this error Code:-65589?

  This error says:

  Shared in environmental_logger.vi variable
  This error or warning occurred when writing the following shared Variable:
  CompactRIO Target\Mod2\DO1 \\RT
  \\localhost\Mod2\DO1

  My cRIO9073 has 3 modules:

  MOD1: 9203 HAVE,

  MOD2: 9472 DO,

  Mod3: 9265 AO.

  When I delete all States and run only the first "init" State where I put DO0 = true and DO1 = false, I get this error. What could be?

  I think we need more information about your project - you can take a screenshot of your project LabVIEW RT target and the location of the shared variables? What is the configuration of the shared variable? Do you use the cRIO Scan Engine or FPGA (or both?)? How you deploy your library of variables? You should also zip to the top of your project and join, if you can.

  Here are some articles about the possible causes:

  http://digital.NI.com/public.nsf/allkb/C32368835ADAEE19862578500067A8C4

  http://digital.NI.com/public.nsf/allkb/7B52091D2FFA01EC86257C32005DF935

• Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?

  Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?

  Hey, if the problem has finally been fixed! I thought you would like to know the solution.

  Select Preferences - network - system - advanced - DNS network - click + symbol - Type 8.8.8.8 - Ok - apply.

  That's all. Works perfectly now. Very much appreciate your help, thank you.

• Cannot update or restore Iphone 6 +. stuck on the apple logo or itune icon

  Hello

  I can't update iphone, the process is blocked when the firmware is updated (50% of the update/restore process)

  iTunes show me the error code (- 1).

  below the error log

  Thank you and best regards.

  [21:26:30.0783] bbupdater: collection of core dump disabled

  [21:26:30.0783] send_bbupdate_status: sending of baseband update host status

  [21:26:30.0783] update_baseband: call CFNotificationCenterRemoveEveryObserver

  update_baseband [21:26:30.0783]: error bbupdater: complete operation couldn\U2019t. (Error 47 BBUpdater - has no gatherPersonalizationParameters in the second step)

  [21:26:30.0783] update [Baseband] error - the operation couldn\U2019t ended. (Error 1004 RamrodErrorDomain - update_baseband: has no mark baseband info)

  [21:26:30.0783] [Baseband] update failed - 0 attempts remaining...

  [21:26:30.0783] 0: RamrodErrorDomain/3ec: update_baseband: has no mark baseband info

  [21:26:30.0783] 1: BBUpdater/2f: gatherPersonalizationParameters in the second stage failure

  [21:26:30.0783] cannot convert the wand error 1004

  [21:26:30.0783]

  [21:26:30.0783] = exit restore is completed.

  [21:26:30.0789] AMRAuthInstallDeletePersonalizedBundle

  [21:26:30.0872] : restore failed (result = - 1)

  [21:26:30.0873] restore completes, status:-1

  [21:26:30.0873] failure Description:

  [21:26:30.0873] depth: 0 error: AMRestorePerformRestoreModeRestoreWithError failed with the error:-1

  [21:26:30.0873] depth: 1 error: the operation could not be completed. (AMRestoreErrorDomain-1 error - failed to handle the kind of message StatusMsg)

  [21:26:30.0873] error in depth: 2: the operation could not be completed. (AMRestoreErrorDomain-1 error - failed to update the firmware of the device)

  [21:26:30.0873] error in depth: 3: the operation could not be completed. (Error-AMRestoreErrorDomain 1 - wand firmware update failed)

  [21:26:30.0873] error in depth: 4: the operation could not be completed. (Error 1004 RamrodErrorDomain - update_baseband: has no mark baseband info)

  [21:26:30.0873] depth: 5 error: the operation could not be completed. (Error 47 BBUpdater - has no gatherPersonalizationParameters in the second step)

  Click/click on the "1" in the first row of the first table > help with iOS update and restore errors - Apple Support ""

• Single line vertical when using the ADF to Scan or copy on HP Officejet Pro 8600

  Printer HP Officejet Pro 8600 Premium (CN577A)

  OS: MS 7 64-bit

  When you use the ADF for my printer HP CN577A Officejet Pro 8600 Premium, I get a single vertical line on the document which is produced. This occurs when copying or scanning, both black and white and in color. If I scan or copy using the glass, I do not get the vertical line.

  I already tried troubleshooting.  I unplugged the printer, left without electricity for several minutes; that didn't fix the problem.  Then, I cleaned the rollers and glass; I always get the vertical line, but only when using the ADF.

  My firmware version is up to date (CLP1CN1150CR).

  What should I check next?

  The only difference between the ADF and scanning flat, from a point of view of the scanner is there on the glass, it happens.  I suggest you get a bright flashlight and examine the corresponsing area hence is the line, it's almost certainly a spot on the strip of thin glass which is being just in the right place.

  I've seen some people suggest that put a flashlight almost parallel to the Strip, it shines from the bottom can highlight the area problem.

• VI Initialize with OptionsString missing the resource name field when creating the IVI Driver Generator LabView 8.6

  Hello world

  We have just uploaded the latest LabView version 8.6 and there is a nice tool called generator of LabView LabWindows CVI Instruments drivers. Our driver of the instrument is an IVI driver that has a LabWindows CVI interface that uses the generation of LabView tool to create all the VI that could be used to talk to the underlying driver IVI hollow discovery of .fp, .sub and .h files. No mistake and screws more than 30 are generated automatically.

  There is an inconsistency in the Initialize function IVI driver. There is a VI Initialize driver without an input of OptionString parameter and there is a second VI with the OptionString parameter.

  Two of these screws should have a required entry field that is the ResourceName of the instrument, but this field is visible in the initialization of VI that has no OptionString input parameter and is not at all visible in other VI initialize that has an OptionString input parameter

  No idea why the second version of Initialize does not display the ResourceName parameter?

  Thank you

  Sorin

  Hey Sorin and Heather,

  I've just built your IVI driver and can see the question you come through.  What version of LabVIEW and the tool are you using?  I am looking into this further for trying to dig your problem a little more.   If you add the connector to the connector pane, the created VI meets the needs that the name of the resource exists, it's just not in the connector pane.  This can do a right-click on the icon in the upper right of the front panel and selecting display connector.  Select where on the VI wish you add the connector, and then select the name of the resource.

• Error when starting the database

  I put the log_archive_dest1 = a: \app\administrator\orcl\archive' parameter and shutting down the database. When I tried to start up the db, I got the following error:
  SQL > bootable media.
  ORA-16032: parameter LOG_ARCHIVE_DEST_1 destination string cannot be translated.
  ORA-09291: sksachk: invalid device specified for the destination of archive
  OSD-04018: cannot access the specified directory or device.

  You probably have a leak-on the dir name IE, D:\app\administrator\orcl\archive\
  (1) ensure that the permissions on the path of the file that you are using the database in reading / writing?
  (2) make sure all the folders in the path already exist
  (3) under Windows, you might find the '-' characters confuse the database. Specify any other paths in the same way for Oracle? An alternative would be to use ' / ' instead of '-'. Different programs that originated in the Unix world handle Windows paths differently

• JumpStartKit installation hangs at 87% complete when creating the database / instance configuration

  Hello people, I am wanting to evaluate Oracle WebCenter Portal 11.1.1.8 (huge improvement over 11.1.1.7, which I have already given a quick test in the VDI provided by Oracle).

  So, I've discovered this Jump Start Kit that installs every needed part once you have a properly configured Linux environment. I had fun with the prereqs but now that everything is finished and I am so EXCITED to make it past 'STAGE 4 '.

  So now, I encounter the same problem during installation - STEP 6 of 22 Configuration of the database Instance (creating database filling) it gets 87% complete and then nothing seems to happen, it never beyond this point, even if I wait 10 hours more:

  ***

  NOTE: I think that my problem is not specific to the "Jump Start Kit", but is rather something others have met during the stage of creation/configuration of the Oracle Universal Installer in general database. And I hope that others have solved.

  ***

  "/ opt/oracle/portal" is my INSTALL_DIR; I had started the installer of JSK with this command:

  . / runme INSTANCE_PASSWORD textile ROOT_PASSWORD = rpwd DOWNLOAD_DIR = = / media/sf_Downloads/JSKfiles INSTALL_DIR = / opt/oracle/portal

  -L' installer makes this well before it seems to get "stuck" - even after many hours there is no change, HD does nothing, CPU stays at < 5% use:

  rtkit.main.JSKStarter - launchScript:172 - kills Jun 10 15:41:38 MDT 2014: BEGIN STEP 6 of 22: Configuration of the database Instance. Estimated time is about 5 minutes. Please wait..

  15:41:38.545 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 -.

  15:41:48.222 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - copy of database files

  15:41:48.413 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 1% complete

  All the 15:41:52.894 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 3%

  All the 15:41:52.915 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 11%

  All the 15:42:02.917 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 18%

  All the 15:42:32.920 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 26%

  15:42:42.638 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 37% complete

  15:42:42.640 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - creation and start-up of Oracle instance

  All the 15:42:48.568 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 40%

  All the 15:42:56.827 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 45%

  15:42:57.357 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 46% complete

  All the 15:42:57.526 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 47 percent

  15:42:57.627 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 48% full

  All the 15:42:57.834 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 49%

  15:44:42.915 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 54% complete

  All the 15:44:42.963 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 59%

  All the 15:44:43.036 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 60%

  All the 15:44:43.452 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 61%

  15:44:43.452 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 64% full

  06/10/2014 15:44:43.453-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - creation of database of fill

  15:44:43.493 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 68% complete

  15:44:43.510 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 72% complete

  15:44:43.571 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 76% complete

  15:45:01.516 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 87% complete

  I use VirtualBox on Windows 7, I tried several times, first with the OS as Oracle Linux 6, then Oracle Linux 5 (learning to update the version of Java of fun!).

  It always happens at the same point, and then it just seems do nothing - no progress, but no error no message on the screen (see below the log files). But it seems to use less than 5%... the use of the processor and 10 hours of waiting makes no difference.

  After that I got tons of Google to search, I tried increasing my paging file, adding more memory and disk space (12 GB of RAM and 10 GB sap) and 20 GB of free space on the hard disk, but still nothing has changed.

  In post #2 of this thread, I'll give you separately the registration details that I hope will be useful.

  Thanks in advance!

  Darren.

  PS: Moderator, I tried to create this thread in other spaces, because I did not know this 'Portal JSK' specific one, which is why my son was rejected? NO REASON WAS GIVEN. If that IS the reason why, I must say that it will be almost impossible for anyone who is able to help me actually FIND this thread here because as I said I don't think specific for ONLY JSK portal. (But I'll post it here just in case this is the reason for previous releases)

  Hey Darren -.

  Installation with installation "office" is not the problem - no conflicting package it.

  I did add a short and FULL in/etc/hosts domain name and use the HTTP_SERVER_NAME option.  (But again, that shouldn't cause any problems during dbca.)

  I didn't install VBox extensions, since I'm just using a text installation (and created a corresponding configuration for VBox and vSphere), but I don't know that this is unrelated to all the.

  Regarding packages, if the database installs fine (which did you), your packages may very well.

  Here is my kickstart file - maybe you can try to use it, and then we can rule out configuration problems.  After the kickstart, everything I do is copy the installation files (in fact, I have them on a separate vmdk I just ride), and:

  (in oracle)

  CD/mnt/orainst/install & mkdir WCPortal_JSK_Linux.x 86-64 & WCPortal_JSK_Linux.x 86-64 cd & unzip /WCPortal_JSK_Linux.x86-64.zip...

  CD /mnt/orainst/install/WCPortal_JSK_Linux.x86-64 &. / runme DOWNLOAD_DIR = / mnt/orainst/installation INSTALL_DIR = / u01/app/oracle/product/webcenter HTTP_SERVER_NAME = wcportal.localdomain INSTANCE_PASSWORD = weblogic1 BIENVENUE1 = ROOT_PASSWORD

  If you want to make a desktop installation, delete the text, skipx and office packages (I added a few comments around that part), and it should work fine.  Don't worry about VBox extensions until you have a JSK running successfully.

  Fingers crossed it gets you more... Let me know.

  -Ed

  #platform = x 86, AMD64 or Intel EM64T

  #version = DEVEL

  # The firewall configuration

  Firewall - disabled

  # Install OS instead of upgrading

  install

  # Use installation CDROM support

  CDROM

  # Password Root

  rootpw - plaintext BIENVENUE1

  # Authorization system information

  AUTH - useshadow - passalgo = sha512

  # Use installation in text mode

  text

  # Keyboard system

  keyboard us

  # System language

  lang en

  # SELinux configuration

  SELinux - disabled

  # Do not configure the X Window System

  skipx

  # Disable firstboot

  Firstboot - disable

  # Level installation registration

  logging - level = info

  # System timezone

  time zone - isUtc America/New_York

  # Network information

  network - bootproto = dhcp - device = eth0 - onboot = on--hostname = wcportal

  # Boot loader configuration

  bootloader - location = mbr - driveorder = sda

  # Clear the Master Boot Record

  zerombr

  # Information partition offset

  clearpart - all - initlabel - discs = sda

  # Partition of a disk information

  part/boot - fstype = ext4 - size = 500

  part pv.01 - growth size = 1

  volgroup vg_wcportal - pesize = 4096 pv.01

  logvol / - fstype = ext4 - name = lv_root - vgname = vg_wcportal - size growth = 1

  # choose only one of the three following instructions

  # / tmp/swappart only works if uncomment lines in pre calc memory size

  #% include/tmp/swappart

  #logvol swap - name = lv_swap-= vg_wcportal - size = 12288 vgname

  swap logvol - name = lv_swap-= vg_wcportal - size = 9216 vgname

  % before

  #MEMT =' cat/proc/meminfo | grep ^ MemTotal | AWK ' {print $2 '}'

  #let SMEM = $MEMT/1024

  #echo 'swap logvol - name = lv_swap - vgname = vg_wcportal - size = $SMEM' >/tmp/swappart

  end %

  % post

  #rm f/tmp/swappart

  # Fix for nproc problem on OL6 (MOS score [1487773.1 ID])

  -i EI sed / ^ \ * \s * soft\s * nproc\s * $ 1024 / * \t-\tnproc\t16384 /' /etc/security/limits.d/90-nproc.conf

  # It's ugly, but seems to be necessary for ks on vsphere (not on vbox), so adding the controls

  Oracle ID > / dev/null 2 > & 1

  If [$?-eq 0]; then

  userdel oracle

  RM-f/var/spool/mail/oracle

  rm - rf/home/oracle

  FI

  groupmod oinstall > / dev/null 2 > & 1

  If [$?-eq 0]; then

  groupdel oinstall

  FI

  groupmod s/n > / dev/null 2 > & 1

  If [$?-eq 0]; then

  groupdel dba

  FI

  Groupadd-g 501 oinstall

  Groupadd-g 502 s/n

  g 503 groupadd Oper

  Groupadd g 504 asmadmin

  Groupadd g 506 asmdba

  Groupadd g 505 asmoper

  adduser, 502 - g oinstall s u g/n, asmdba, oper, oracle of wheel

  passwd oracle<>

  EU1

  EU1

  EXPRESSIONS OF FOLKLORE

  # kdump(1) not enabled when you install text without firstboot

  / sbin/chkconfig off kdump(1)

  Hostname = wcportal

  echo DHCP_HOSTNAME =------"$HOSTNAME\" > / etc/sysconfig/network-scripts/ifcfg-eth0

  IPADDR = "/ sbin/ifconfig eth0 |" grep inet\ addr. AWK '{print $2} ' | cut d: f 2'

  echo $HOSTNAME.localdomain $IPADDR $HOSTNAME > / etc/hosts

  # Disable graphical boot

  # but doesn't for some reason any!

  sed-i of / rhgb quiet / / g' /etc/grub.conf

  mkdir Pei/u01/app/oracle/product/webcenter

  chown-r oracle: oinstall/U01

  end %

  % packets

  @additional-devel

  @base

  @compat-libraries

  @console-internet

  @debugging

  @directory-customer

  @mail-server

  @fonts

  @graphical-admin-tools

  @hardware-monitoring

  @java-platform

  @large-systems

  @legacy-unix

  @legacy-x

  @nfs-file-server

  @network-file-system-client

  @network-tools

  @performance

  @perl-runtime

  @scientific

  @server-platform

  @system-admin-tools

  # - UNCOMMENT TO DESKTOP - START

  #@basic-desktop

  #@desktop-platform

  #@x11

  # - UNCOMMENT TO DESKTOP - END

  compat - libcap1.x86_64

  compat-libstdc ++-33.i686

  compat-libstdc ++-33.x86_64

  elfutils-libelf - devel.x86_64

  expect.x86_64

  GCC - c++ .x86_64

  glibc.i686

  glibc - devel.i686

  ksh.x86_64

  libaio.i686

  libaio - devel.i686

  libaio - devel.x86_64

  libgcc.i686

  libstdc ++ .i686

  libstdc ++-devel.x86_64

  NSS-softokn - freebl.i686

  numactl - devel.x86_64

  unixODBC.i686

  unixODBC.x86_64

  unixODBC - devel.i686

  unixODBC - devel.x86_64

  glibc.x86_64

  glibc - common.x86_64

  glibc - devel.x86_64

  glibc - headers.x86_64

  NSS-softokn - freebl.x86_64

  Oracle-RDBMS-server-11 GR 2-preinstall

  end %

• Single account Dreamweaver, linked to the database.

  Hi guys,.

  I'm very new to dreamweaver, this new maybe that this issue is too complex for a person like me to ask. But okay, I'll give it a shot!

  I currently have an empty HTML page than dreamweaver. Absolutely nothing about this, have not yet touched (so I can not he mess up)

  I have a database (Microsoft access), also with nothing on it.

  My goal is to create a page that will record a person with username: has and password: a (some examples) and then add them to the database [ID 1] under two columns 'Username' and 'Password '.

  I would do exactly the same thing but for a person with username: B B password and these should be saved for [ID [2]

  Maybe not too difficult, so far, but it's where I have not seen anything be it online when it comes to tutorials (or at least easier for me to follow same noticed they have on everything).

  I want when they sign in, then go to a page that will say ' Welcome Back + their "Username"

  Or on the database it be a third column with a number; for example (user A has a number 98 and user B has a number 99), for this number to be displayed somewhere on the page when they connect.

  
  

  It is essential that it works when two users are connected at the same time.

  
  

  Thanks for any help. Bare in mind, I'm a noob, although any explanation or advice would be welcome, it is not a value assuming I know something that may be obvious to you guys!

  
  

  I have Dream Weaver CS6.
  

  Thank you very much

  What experience of programming server-side do you have?

  If the answer is little or none, I think you should stick to the wide and advanced projects, until you get more coding experience.  But to answer your question, please see the following article:

  How to create a Script of connection secured in PHP and MySQL - wikiHow

  Nancy O.

• Cannot update Windows 8.1. When I click download it says your applications have been installed!

  Hello

  I can't update my windows to 8.1. After that I selected the store download, it shows "your applications have been installed. I don't know what went wrong. Did a search on google and ended up with nothing until I decided to publish it here as my last desperate. Hope someone can help out me.

  How to upgrade to Windows 8.1:
  http://pcsupport.about.com/od/Windows-8/SS/how-to-update-to-Windows-8-1.htm

  Try to clear the Windows Store cache, and then try again. You can do this by running wsreset.exe from the PPP to run , located on the application screen. Measure can also be started via the Menu power user or by pressing R and WIN together on a keyboard.
  Source: http://pcsupport.about.com/od/windows-8/ss/how-to-update-to-windows-8-1_3.htm

• Different behaviors in MAX vs LabVIEW when writing the attribute IMAQdx GigE

  Hi, I'm controlling a Dalsa GigE camera in LabVIEW RT using IMAQdx.  Apart from a few quirks with interface we are image acquisition without a lot of problems at the moment.

  However, there are one or two issues that are confusing.  In this case, it is possible to set a MAX attribute (an attribute of command that tells the device to perform the internal calibration), but when you set the attribute in LabVIEW, the error 0xBFF69010 (-1074360304) unable to create the attribute is thrown.  See the attached images.

  I check if the attribute is writable before making an entry.  It is, however, the write failed, and read the iswritable attribute and then returns false.  In MAX, I can write to this attribute with no problems.

  I have to set up/read/write in my LabVIEW code that makes MAX.  MAX writes all the attributes (based on the values in the XML file) when he opens the camera or he reads simply all the values of the camera.  When LabVIEW opens a reference camera does perform the same steps that what MAX - I'm trying to figure out what could be the difference between MAX and LabVIEW, which might be the cause of this behavior.

  Any help will be appreciated.

  AnthonV wrote:

  Hi, I'm controlling a Dalsa GigE camera in LabVIEW RT using IMAQdx.  Apart from a few quirks with interface we are image acquisition without a lot of problems at the moment.

  However, there are one or two issues that are confusing.  In this case, it is possible to set a MAX attribute (an attribute of command that tells the device to perform the internal calibration), but when you set the attribute in LabVIEW, the error 0xBFF69010 (-1074360304) unable to create the attribute is thrown.  See the attached images.

  I check if the attribute is writable before making an entry.  It is, however, the write failed, and read the iswritable attribute and then returns false.  In MAX, I can write to this attribute with no problems.

  I have to set up/read/write in my LabVIEW code that makes MAX.  MAX writes all the attributes (based on the values in the XML file) when he opens the camera or he reads simply all the values of the camera.  When LabVIEW opens a reference camera does perform the same steps that what MAX - I'm trying to figure out what could be the difference between MAX and LabVIEW, which might be the cause of this behavior.

  Any help will be appreciated.

  Hi AnthonV,

  "Weird" is a good way to describe the Spyder3 when it comes to the GigE Vision/GenICam interface (as opposed to the Dalsa driver that communicates using custom commands via ethernet camera series)...

  The Spyder3 has many questions focused on the calendar. It is possible that the time between the opening of the camera and the setting of this function is different by MAX vs your code in LabVIEW. In addition, there are some cases where MAX will be deletes the error to display. Ignoring the error indicated vs you see the feature to take effect in both cases?

  The base between MAX and LabVIEW behavior is the same. In both cases when you open the unit all parameters are responsible for our camera file that has the registered device settings. This file is created the first time that you open the unit and are updated every time you click on save to MAX or call an API function to save the settings. In any case, I know that the Spyder3 has various questions backup/restore the settings of our camera files.

  I suggest talking with Dalsa on the issues you are experiencing. They might be able to put up with a newer firmware that addresses some of these issues (we have worked with them in the past to identify several of them).

  Eric

• Cannot update firmware for nex5 - checked all of the below problem but still the same

  

  I just did another "chance"... .installed mac os Lion 10.7.5 on Ext. hdd, started in 32-bit mode... app is running, but still does not see my camera when you try to update fw [finder load 'mass storage' normally, is not just the app updare] any ideas?

• Cannot update Vista or any other software on the pc. Receive the 8070652 error code

  We can not update Vista windows products on our Vista PC or not.  For products no windows, we receive a message indicating that another installation is in progress.  For Vista that we receive 8070652 error code.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Win7 Ultimate Media Center Edition. Two channels ATSC displays only when I hit 'Record', otherwise 'channel not found', full strength 5 bar

  In the Seattle area, when I tune the channel 7.1 and 7.2 in the settings of signal strength, I still see 5 bars. It's the local affiliate CBS, KIRO.

  I have a HVR2250 dual tuner PCIe Hauppauge tuner card which has worked flawlessly for about a year. The drivers are current, 8851 dated June 2013. He also runs the current WinTV7 version 2. 8A. I do not use the Hauppauge app generally and it's not usually loaded with the exception of the tests. There is no shows at the request of record with WinTV7, although I could test records programmed successfully using this application.

  When I adjust the Guide, or by browsing the channels, MCE says no signal received 7.1 and 7.2.

  When I adjust everything first to one of them in the 10-15 seconds avant-erreur MCE 'no signal', if I reached the record, the channel is immediately blocked, including digital video and audio Dolby, and the program starts recording. I can stop recording, and as long as I don't change away from this channel, it remains fully functional with clear reception.

  I'm on a hill and have the correct line of the broadcasting antenna site about 12 miles away. I can also have this channel without problem on WinTV7 app by Hauppage, and setting my Samsung tuner screen, indicate both maximum resistance.

  The biggest problem is that the series on the logging sometimes channel show "available channel", and does not record successfully. If I manually start recording, it works every time.

  Is there any settings I can adjust to decrease the sensitivity required in MCE?

  Hi Scott,.

  According to the above mentioned the question on the Media Center, I have some suggestions for you so that you can go ahead and try see if this can help you.

  Method 1:

  Try the steps as indicated by "Cliffskier", who responded on 24 September 2012 in this thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Centre-unable-to-to-watch-live-TV-but-can/3f093264-A811-4106-81d6-75e6434c1aad?page=2

  Method 2:

  Try us to update or download the list of guide for the media center. While we ensure that we have the list of guide updates and channels. After completing the above step, then try to search for and implemented.
  http://Windows.Microsoft.com/en-us/Windows7/use-the-guide-in-Windows-Media-Center

  For more information:
  http://Windows.Microsoft.com/en-us/Windows7/record-TV-in-Windows-Media-Center
  http://Windows.Microsoft.com/en-us/Windows7/watching-TV-in-Windows-Media-Center-frequently-asked-questions
  http://Windows.Microsoft.com/en-us/Windows7/TV-signals-that-are-supported-by-Windows-Media-Center

  Hope this solves the problem. If the problem persists, you can write back to us information and we will be happy to help you further.
  Thank you.