Cannot Upgrade to vCenter 5.5 update 3 b

Similar Questions

• The upgrade to vCenter 2.5 update 4 for vSphere 5.0

  I just realized that my vCenter 2.5 is only to update 4. I plan on creating a 64-bit VM and then perform a new installation of vSphere 5.0. Since I do a new install, I have to worry first update of my vCenter update 6?

  Thank you

  With a new installation, you don't have to worry about the upgrade of update 5

• Online upgrade to VCenter 4.1 update 4.0u1

  Hi all

  I am about to the VCenter 4.0u1 only in 4.1 update on my vsphere infrastructure, the rest of the ESXi can stay in 4.0u1 since there is no performance / big improvement at all.

  I am running:

  Windows Server 2003 Standard R2 SP2 x 64

  SQL Server 2008 SP1 Standard x 64

  should I pay attention before the upgrade online of the 4.0u1 for VCenter in 4.1 in the production environment?

  any kind of help would be greatly appreciated.

  Thanks in advance.

  Kind regards

  AWT

  It is a fairly straightforward improvement.  You need however is a 64-bit SQL Native Client.  Additionally, make sure that you back up your DB.

  http://www.VMware.com/PDF/vSphere4/R41/vsp_41_upgrade_guide.PDF

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=c6c3e9ef-BA29-4a43-8D69-a2bed18fe73c&displaylang=en

• steps to upgrade vcenter 5.5 Update 2 b to update the 2nd

  Received a security notice that there is a JRE vulnerability and to solve this problem of VMware recommends upgrading to vcenter 5.5 update 2nd my 2B update.  I try to find a doc to follow and do not see anything other than the installation guide initial vcenter.  Everything the world had to update x 2 on the 2nd and is there any concern about?

  Begins to get the feeling that all the components must be re-installed-SSO, inventory, Web etc, I really hope this isn't the case.

  Any comment is welcome.

  Thank you

  just upgraded on the spot and follow the same steps as the first time installation. you don't need to re - install everything.

• Update error 0 x 080070490 and cannot upgrade to resolve this

  I have Vista Ultimate 64 SP2.  During the "update of security for Windows Vista for x 64-based systems (KB967723)" he received the error
  0 x 080070490. http://support.microsoft.com/kb/958044 page says the thing to do for Vista is to perform a repair installation.  To perform this installation with the DVD and choose to upgrade.  I tried using en_windows_vista_ultimate_sp2_checked_build_x64_dvd_342433.iso but I can't do it because I get the error:

  You cannot upgrade an intermediate version to a version not intermediate.

  Clues please?
  Thank you
  Chas

  I found a system that works.  One who did not was only to ultimate. One who did was for all the flavors and typing the key to choose one which.  Maybe that's what is staged means (?).

• vCenter 5.5 Update 2 b adapter stop collecting data after vRops 6.2 upgrade

  Hello

  I just upgraded my vRealize operations to 6.2, and I work with two servers vCenter - vCenter 5.5 Update 2 b Build 2183111 (Windows OS) and vCenter Server 6 (Linux VCSA Appliance).

  After the successful upgrade - stop vCenter 5.5 collect information (adapter stuck on 'Start-up'), the vCenter 6 is very well and continue to collect information.

  What I've done so far:

  1. Restart both vROps and vCenter 5.5.
  2. Click on the Stop button next to the vCenter adapter 5.5 and click on start.
  3. Restart vCenter 5.5, click on stop, then wait for all services of vCenter to get running and click Start.

  Anyone who is familiar with this issue and know how to solve? I'll be happy to learn some tips/advice/solutions/solutions to my problem.

  Thank you! :-)

  Hello

  You can try to remove the adapter and re - create.

  Remove and re-add the adapter Instance

  Remove and re-add (X / +)

  Home > Administration > Solutions > choose adapter > Configure (click on the gear icon) >

  Save the vCenter display name, Description, IP address of the server, credentials and expand the advanced parameters and note the configuration of collectors/groups (it may be by default group of collector)

  Delete:

  Select the Instance of the adapter

  Click on the "X" icon to delete the instance.

  Do not check the box "delete releated objects '.

  Click the Yes button

  Click on the "X" icon to delete the instance.

  Add:

  Click the '+' to add the instance.

  Enter the display name, Description, vCenter Server IP address, credentials and expand the advanced settings and select the same collectors/groups configuration previously used (it may be by default group of collector)

  Click on the button "test connection".

  Review and accept the certificate

  (You can select and copy the certificate information and save it for a record)

  Click the 'Save Settings' button

  If you are prompted, select this option to Force recording

  Click on the close"" button.

• upgrades of vcenter 5.0.1b to 5.0.2 (5.0 update 2) includes the schema of database update/upgrade?

  upgrades of vcenter 5.0.1b to 5.0.2 (5.0 update 2) includes the schema of database update/upgrade?

  Hello

  I'd be surprised if there is one, but have you checked with the database audit tool?

  http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2004286 - mentions not required for minor updates but still should be able to run it.

  Many tx

• vCenter 4.1 Update 1 upgrade of update 2

  Hey all,.

  I'm stuck on something and need help. We have a vSphere 4.1 environment we need to spend 4.1 update 1 to 4.1 2. I've never done this before and I am struggling with the right way to do it. My understanding is that you need to update your server vCenter first, then update manager, you can use UNIFIED messaging to update ESXi hosts. I found a post that says that the only way to vCenter is to do a new install of update 4.1 2.

  If this is correct, how can I do a fresh install of vCenter without losing all my configurations? I started the installer and can't me what database, I want to install (i.e. the SQL 2005 Express included or an existing DB). If I point to the DSN for my existing DB, it will overwrite the DB or whether it is sufficient to install the update and let the DB in place?

  I guess that the same question would be relevant for UNIFIED messaging was updated as well.

  Quick notes... I cloned times my App Server VM vCenter and the DB Server VM vCenter, well I prefer not to overwrite my primary. I'm on an isolated network, so I don't have access to the VMware patch repositories. And I can't jump to vSphere 5. Any advice or suggestions would be greatly appreciated!

  Thank you

  
  Jeff

  Hello

  Before doing anything that is reading this doc
  http://www.VMware.com/PDF/vSphere4/R41/vsp_41_upgrade_guide.PDF (for you the most interested party will be on page 37 - place upgrade)

  jeffgetz wrote:

  Hey all,.

  I'm stuck on something and need help. We have a vSphere 4.1 environment we need to spend 4.1 update 1 to 4.1 2. I've never done this before and I am struggling with the right way to do it. My understanding is that you need to update your server vCenter first, then update manager, you can use UNIFIED messaging to update ESXi hosts. I have

  Yes, first step is always venter with all components (VUM, converter, etc.), and after upgrading vCenter you can do the upgrade to ESXi via VUM

  If this is correct, how can I do a fresh install of vCenter without losing all my configurations? I started the installer and can't me what database, I want to install (i.e. the SQL 2005 Express included or an existing DB). If I point to the DSN for my existing DB, it will overwrite the DB or whether it is sufficient to install the update and let the DB in place?

  No, it wil not crush a DB, it will ask you whether you want to upgrade current DB

  I guess that the same question would be relevant for UNIFIED messaging was updated as well.

  Yes

  Quick notes... I cloned times my App Server VM vCenter and the DB Server VM vCenter, well I prefer not to overwrite my primary. I'm on an isolated network, so I don't have access to the VMware patch repositories. And I can't jump to vSphere 5. Any advice or suggestions would be greatly appreciated!

  You want to perform the upgrade on isolated VM and move them later to PROD? I suggest to clone vCenter VM and VM DB first and update on the PROD not cloned servers.

  Good luck

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• My friends iPad 3 cannot upgrade to iOS 9, stuck on iOS 8

  O Hai guys my friends iPad der 3 stuck on iOS 8 and it cannot upgrade to iOS 9.2. Please halp and give clues to meh!

  Hello Horriblestar5,

  Thank you for using communities Support from Apple!

  I understand from your question, that you have problems, update your iPad on iOS 9. Have you tried updating by Wi - Fi or via iTunes? The following article explains the two processes; I would first try to update by using the method that you have not yet tried.

  If you are still unable to update, please work through the steps in the next section to help resolve this situation.

  Solve the iOS update and restore error in iTunes - Apple Support

  See you soon!

• Scanner HP Scanjet 4200C: cannot upgrade Windows XP to Vista

  After the migration from Windows XP to Windows Vista I can no longer operate my scanner HP Scanjet 4200 C. I installed the original series of scanner HP 4200C software and plugged the scanner via the USB interface. The software starts up, but cannot find the scanner. After reviewing the HP web page I discovered that HP does not provide an upgrade to Vista; the last update they provide is for XP and not Vista-compatible. Everyone had the same problem and found a solution?

  HP has written drivers for their products, not Microsoft.

  If HP has said that there are no Vista drivers for your printer model, it has none.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=60118&LC=en&cc=us&DLC=en&submit.y=6&submit.x=9&lang=en&cc=us

  If it will not work with XP drivers on the link above:

  You will need to consider buying a Vista Compatible Scanner.

  See you soon.

  Mick Murphy - Microsoft partner

• Service component of VMware Manager fails to start in vCenter Server 6 Update 2

  Hello

  A brief idea of my test environment:

  VCenter servers:

  VC1 - recorded at the psc1 in Site1

  VC2 - recorded at psc2 in Site2

  External Services platform controllers:

  psc1 - Site1

  PSC2 - Site2

  SSO domain: vsphere.local

  I upgraded from vCenter Server 5.5 update 3d to vCenter Server 6.0 Update 2. VCenter 5.5 servers had integrated / embedded of SSO and all services running on the same machine and were in modes related before the upgrade and I have them removed modes related before the upgrade. They have been upgraded to vCenter Server 6.0 with Embedded PSC and they entered automatically improved Linked Mode (ELM).

  After the previous step, I deployed the PSC external psc1 respectively 2 and psc2 mode of replication with vc1 and vc2 in the same site Site1 and Site2. I migrated then boarded two PSC vCenter servers to their respective partners external PSC of replication by running the command cmsso-util reconfigure - repoint-PSC "psc1/psc2" - administrator user name - domain name "vsphere.local" - passwd "Hasło_Administratora." This operation ended successfully and my vCenter have been reconfigured as vCenter Server with external CFP.

  After that, I followed article KB VMware 2127057 (agreements ofdetermination of replication and the State with the service controller 6.0 platform (2127057) |) The VMware KB) do psc1 and psc2 external replication of the PSC 2 partners either by running the command vdcrepadmin-f createagreement-2--h psc2.clifford.local h psc1.clifford.local u Administrator w 'Hasło_Administratora '. I ran this command psc2. Also, this operation succeeded, and when I ask the State of replication of the psc1 of replication partners and psc2, there is nothing wrong. However, after restarting my vSphere Infrastructure, I see that vc1, psc1 and psc2 have all their services started successfully.

  VC2 services seem to be failing, especially the service component manager of VMware which is required for many other services start. The VMware HTTP Reverse Proxy service starts properly and I have no IIS role / feature installed on my machine. The error message that occurs when you try to manually start the service is also attached as a file Error2.JPG in the discussion. The Windows event log error is as deeply as the file Error3.JPG in the discussion.

  Please let me know how to solve this problem as soon as possible.

  Well, I found a solution myself.

  In fact, after I created the external PSC 2 psc1 and psc2 partners of replication of the vc1 and vc2 in Site1 and Site2 respectively, I had to immediately follow section KB VMware 2127057 in order to create a replication agreement between the 2 external to the PSC psc1 and before psc2 I reconfigured and show the vCenter servers vc1 and vc2 of on-Board of the PSC outside the PSC following the VMware Documentation (Center of) VSphere documentation 6.0).

  That's all.

  Thanks to all for looking into it.

• upgrade to vCenter/SRM to 6.1

  All,

  We have recently updated our server vCenter 5.5 Update 2 to 6.0 Update1b.  All thanks to the improvement of the PSC and vCenter went to the wonder.  The problem we run into is with MRS.  We have improved 5.5.1 to 6.0 SRM that crossed successfully.  However, whenever connect us to vSphere Web Client and run SRM we get the following message when you click sites:

  Cause:

  Connecting to remote servers to SRM Server to https:// < IPofLocalSRMServer >: 9086, vcdr, vmomi, sdk needs to be reconfigured.

  I can't find anything on this error and have waited for hours for the VMware support call.  Any ideas?  We get this message with the SRM Server (remote and the).

  I suspect it is a certificate problem, but I can't identify where.  When you go to https://srmhost:9086 , I get the following:

  Local connections

  -------------------- --------------------------------------------------------------------------------
  Service com.vmware.cis.cs.inventory
  URL https:// < vCenter Server >: 443/invsvc
  Unknown thumbprint
  Status connected
  -------------------- --------------------------------------------------------------------------------
  Service com.vmware.cis.vcenterserver
  URL https:// < vCenter Server >: 443/sdk
  Unknown thumbprint
  Status connected
  -------------------- --------------------------------------------------------------------------------
  Service com.vmware.cis.cs.inventory
  URL https:// < vCenter Server >: 443, invsvc, vmomi, sdk
  Unknown thumbprint
  Status connected
  -------------------- --------------------------------------------------------------------------------
  Service com.vmware.cis.cs.lookup
  URL https:// < vCenter Server >: 443/lookupservice/sdk
  Unknown thumbprint
  Status connected
  -------------------- --------------------------------------------------------------------------------
  Service com.vmware.cis.cs.identity
  URL https:// /SSO-AdminServer/SDK/vsphere.local < vCenter Server >
  Unknown thumbprint
  Status connected
  -------------------- --------------------------------------------------------------------------------
  Service com.vmware.cis.cs.authorization
  URL https:// < vCenter Server >: 443, invsvc, vmomi, sdk
  Unknown thumbprint
  Status connected
  -------------------- --------------------------------------------------------------------------------
  Service com.vmware.cis.cs.license
  URL https:// < vCenter Server >: 443/ls/sdk
  Unknown thumbprint
  Status connected
  -------------------- --------------------------------------------------------------------------------

  Thank you!

  Hello

  after upgrade, you must reconfigure the pairing between sites or fix the connection from one site to the other. This should be a time effort and it is necessary to renew the certificates information in SRM products improved after all.

  You can find more useful information in our documentation - Site Recovery Manager 6.1 Documentation Center

  Procedure

  1	In the Web Client vSphere client, select Site Recovery > Sites, right-click on a site and select reconfigure matching to reconfigure the connection between sites Site Recovery Manager.

  Hope that this is sufficient,

  Daniel G.

• Upgrade to vCenter 5.1 to 6

  Hello

  Received a customer request to improve environment vsphere 5.1 to 6. Upgrade include below.

  Please suggest what is the best practice for upgrade. Should I put the host to vcenter first level, then vclient, Update Manager. What things should be verified/backed up before upgrading.

  1 Vcenter

  2 Vclient

  3. Update Manager

  4 host

  Thanks in advance.

  Manky

  Your order of upgrade look OK and I recommend that you take a look at these KB articles for some best practices:

  VMware KB: Upgrading recommended vcenter Server 6.0

  VMware KB: Best practice to install or upgrade to VMware ESXi 6.0

  If you have any other VMware products installed, take a look here for the update sequence: VMware KB: update of the sequence for vSphere 6.0 and their compatible VMware product

• vCenter 5.0 Update 2 for update 3

  Hey guys,.

  I have 2 vcenter (1 physical and virtual 1) servers with vmware 6.5 pulsation clustering.

  My plan is to update the update vcenter 2 to day 3.

  What would be procedures?

  1 - do I need to install the update on the vcenter servers?

  2 - stop pulse/vcenter services before you start the update?

  Thanks in advance.

  Heart rate 6.5 Installation contains a section of upgrading to vCenter Server, which is protected by the https://www.vmware.com/pdf/vcenter-server-heartbeat-65-installation-windows-2008-virtual-guide.pdf heartbeat

  Even if the document is 5.0 to 5.1, you can still use it as a reference guide. There will be a party in the procedure where you will be asked to upgrade the database, given that you apply an update, select do not overwrite

  "If the application of an update, when you are prompted, select don't overwrite, let the existing database in place, otherwise if there is an upgrade, when you are prompted, select upgrade vCenter Server database.

• Can vCenter 5.0 Update 2 servers operate in mode related with vCenter 5.5 servers?

  We have 5 servers vCenter linked mode vCenter 5.0 Update 2 (5.0.0 Build 913577).  We would like to take the vCenter DEV server and upgrade to 5.5 to test.  A 5.5 vCenter server will be able to enter modes related to vCenter Update 2 5.0 servers?

  No, which won't work. Please see Linked Mode Configuration required for vCenter Server

  André