Cannot use free transform automatically, why?

Similar Questions

• Why the text disappears when I rotate using free transform tool?

  Hello

  My text is visible before turning to the vertical position using the free transform tool. But when once it is turned upright the text disappears from the scene. And is not as well animated text? What is the problem?

  Thank you.

  you need to incorporate your policy.

• using free transform

  use cs3... trying to free transform, but for some reason any menu, I can not use the didstort or from the point of view work... What do I do to make it active?

  Thank you!!

  Are you trying to transform a smart object layer? In CS3, you cannot use the Perspective transformations or deformation on Smart Objects. You must rasterize the smart object first. Let me know if this isn't what is causing your problem.

• I cannot using the transform tool.

  I watch a tutorial on how to make a target in photoshop. I use windows while the guy in the tutorial uses a mac so some shortcuts are the same under windows. Anyway, here's where I'm stuck. First of all, I made a circle with the selection and then inverted and filled Rectangle tool then the layer of white. I then reversed back again. I use the free transform tool and I scale down to make a circle and then fill it with white. I try to repeat the process rather than leave the image as it already is, he is constantly changing the circle that I've already been working, but I want to reduce a new circle, so I can fill that one. I hope thsis is sensible. I was able to do it correctly the first time, but for some reason, I can't produce the same result.

  Hello

  Make sure that the second circle you make should be on another layer, if the two circles will be on a single layer the reduction will affect the other.

  Thank you

• Problem with free transform [was: resize tool help!]

  To resize a layer using free transform, it's only allowing me to use the rotation tool.  How can I change that so I can resize vs turn?

  

  Float your cursor over the corner and then it will change to the one shown above. When you resize, hold down the SHIFT key to keep the proportion.

  Or, choose the command Edition > transform > scale

• Free transformation problem

  Hello.

  I use free transform a little and I think I accidentally hit a session which causes an error when I try to resize with free transform. I do an animated storyboard (animatic) and creates a lot of material in the PScs6.

  Here's an example of my problem:

  When I put a layer or an image in photoshop the reselution seems well. I have cut it down using free transform to a Board and then I want to free the same transform layer and make the largest object in the next Board of Directors. The problem is when I do this the remains of the reselution "shrunk" version It does not become, and I find myself with a version low resolution of the layer that I want to use over and over again. I used the free transform a bit in the past with none of the drama so I guess I have enabled or disabled a setting somewhere.

  Can someone help me to rectify this situation.

  Thank you!

  Scott, when you reduce the image with transformation, PS throw pixels to enlarge the image to its smaller size. more reduce you it, the pixels further, he throws. Then when you use transform again to expand it to the next Board of Directors, he must try to reinvent the pixels lost, with the result an image low resolution polyhedral. The solution is to convert the image to a smart object before reduce you. To do this, go to the layers panel, right-click on the image layer and select Convert to smart object. Who saves a copy of the full resolution that can be used when you shrink and then enlarge the image. Of course, if you make the image larger than its original size, PS will have to invent pixels, reducing the quality once more.

• Problems with Free Transform tool in CS4

  I use free transform tool on PC before, first time on Mac. I noticed something different on Mac. Whenever I select free transform and manipulate the image I want, the rest of the original image, not processed on the same layer, if I get an overlap of the transformed image I want with the original image below. It was not that big of a problem before, but the more I use it, more annoying this problem appears. Is it possible to fix this?

  Are you hit control-alt-T instead of command-T maybe?

• I use Illustrator CS6 (Mac). I use the free transform tool. Why can I not use shift, Option, command to distort in perspective?

  I use Illustrator CS6 (Mac). I use the free transform tool. Why can I not use shift, Option, command to distort in perspective?

  Ah, hong.

  Then, drag Option and only use Cmd + shift.

• Cannot deform stuck HAVE dynamic object using the free transform vector in PS CS6

  Hello

  I stuck a vector object in PS CS6 (13.0.1 x 32) today directly from Illustrator CS6 (16.0.1 x 32) and select 'Paste as smart object' (Windows XP Pro SP3).

  I then tried to distort the object glued using the free transform tool by dragging one of the handles to angle with hold CTRL (Windows).

  General warps\distorts the object, but instead, it launched an operation to bias .

  If I paste as Pixels or shape layer and then apply free Transform, < Ctrl + corner handle slide > performs a warp\distort operation.

  Also, if I have rasterized glued it opposed and then convert them to a smart object, I can warp\distort.

  Is it not possible to paste a vector Illustrator in as a smart object, then warp\distort directly using this technique?

  Thanks for your help.

  Richard

  Your right because on a stuck vehicle a smart cannot deform, false or perform perspective transformations.

  One solution would be to right click on the vector smart object layer in the layers panel and

  Choose Convert to smart object.

  It depends on what is your object, you would probably better quality of a pasted shape or path, but then you will not be able to open the object

  back in illustrator from photoshop.

• Why my PC cannot use all of the available memory?

  Hello

  I have windows ultimate 64 bit and the 6 GB of ram (laptop)

  http://img03.arabsh.com/uploads/image/2012/09/19/0d36454a60fa0d.PNG

  As shown in the photo, there is a free memory and available memory

  Total: 6058
  caching: 2713
  available: 2552
  free: 1

  Why windows cannot use the available memory, although there is no such thing as free storage space!

  What you see is normal.

  Windows 7 do not free memory. He's trying to preload it with applications that she believes, based on experience, that you may need.

  If you have plenty of RAM, you can see more free memory if Windows doesn't find anything to him with preload.

  Available memory is not actively used by all processes memory but it is preloaded with applications, is of the opinion, based on experience, that you might need as I said above. If it is required by another process, it is available to be used and the preloaded data are deleted.

  I hope this helps you.

• Why does the warp tool work in free transformation more

  I used to use the warp function all the time with free transform, but now it seems not to do anything. I can select, format choices, but the grid is not displayed on this subject so I can transform into another form.

  Have not set something up with the latest version? I don't understand what happened.

  What type of layer that you use it on? String won't work with text layers, for example.  Try on a raster layer and come back if it still does not.

• Cannot use Bluetooth notebook Mouse 5000 - mouse in Windows 7.

  I do not understand, cannot use the notebook mouse 5000 in Windows7. When the Logitech mouse can. I can be found by bluetooth, but it has not installed all the drivers. And it cannot be used at last. I have no why material made by Microsoft may not be recognized by the new Microsoft System. I think it's funny. However, in the website of this mouse. It was said to be supported by Windows 7.

  I have Windows 7 Ultimate 64 bit and you are using the Microsoft Bluetooth Notebook Mouse 5000.  I tried the way Service.MSC recommended to select automatic and then local system and then OK and and so on.  It does not work.  I thought the mouse was defective, but then I tried to pair it with three other phones and it is paired with each other.  Why not on Windows 7 system?  I found the problem.  In all humility, wait a few days before making the following fix to give time for a technical genius to say that it is a good solution or if I just open my system to a host of other issues.  What I can say to you is the failure to connect the mouse has been frustrating but the fix I suggest worked instantly.

  Go to the icon START and type services. MSC and some SERVICES.  The dialog box that opens has a long list of things but find BLUETOOTH SUPPORT SERVICE and double-click or open it.  Select AUTOMATIC.  See the LOG on tab.  Choose the LOCAL SYSTEM and this is the road to nowhere.  This was the recommended fix, but it has never worked for me.  Select THIS ACCOUNT instead.  Type of LOCAL SERVICE.  NOW; If you click OK, it will say select password invalid or such.  No problem.   This; type Local Service in the dialog box, and then delete (a 15-dot-string) password points under the password and remove the string under confirm (the two password boxes are now empty).  Choose OK.  SUCCESS.  It should then tell you to STOP the service, then re - start the service before the change to take effect.  It should work now.

  The first thing to understand I guess, is that there is a difference between the LOCAL SYSTEM and the LOCAL SERVICE.  Configuration help dialog box says the password in the choice of LOCAL SERVICE is a null password - that was my idea.  When I chose the LOCAL SERVICE (typing in the line of dialog box) I would always get the password box and this is what brought me to take a break.  Since it is a NULL password according to the Help menu - then you should be able to remove it?  Yes, I did.  He accepted my change and after stopping and restarting the Microsoft Bluetooth Notebook Mouse 5000 service (don't use any transmitter/receiver) has worked perfectly and CONNECTED!

  I compared all my other systems that accept pairing by checking SERVICES. MSC and each computer using LOCAL SERVICE AND NOT of LOCAL SYSTEM!

  There you are!  As I said to the expectations of the beginning to see if a technical person writes and says "do not follow this recommendation.  I have no computer knowledge and my dose could have opened other problems outside power connect the mouse, the object of the exercise.  I'll look for it, too, in case I just create an unintended complication of other stuff like viruses, malicious this-and-that, and so on.

  I post because the solution worked and I wanted to share the solution of all the many hours of total frustration in finding a solution to the question of the mouse.

• Citing the free transform on the smart object place encompassing top left

  I've got something weird going on in PS CC 2015. It runs on a computer Windows 10. I placed a psd file of a company in the active document logo. I shot it, scaled and added some layer styles. Then at some point I had to resize it again, so I called the free transform command, but now the framework encompassing loads in the upper left corner of the document. Any changes to one of the settings in the Panel Options F. T. causes the logo to disappear completely, even if I can go back to the default values. This occurs only after I added a mask to the layer. Without the mask, everything works fine - add the mask, and I get this oddity.

  No idea why?

  

  the dynamic linked object should update its content

  window-> properties: update of content

  something more I would say... Double-click on the smart object and use the crop inside tool

  

• I use Photoshop CC and I have problems to use the scanning feature PLC culture and the strraigten.  Other printing features work within the progrram, but no connection when I use don't automate.

  Am I missing a configuration of PLC to allow me to crop and scan several photos?

  With the help of 8.1 with canon MX340 wireless and final version of Photoshop CC.

  Help.

  [email protected]

  VIC

  I plugged a usb cable and I was able to use the WIA import feature and

  the menu of the controller,

  He gave me the opportunity to select the printer and scan using the automaton

  function.

  When I removed the cable, it would not recognize the printer scanner in the

  Wireless mode.

  I tried to restart the system, no luck.

  In fact, when the cable is removed, the function to automate is

  "grayed out" which would explain why it cannot find the scanner.

  Any ideas?

  VIC Ouellette

  K1CGI... QRZ?

  In a message dated 12/09/2015 11:41:18 eastern standard time,

  [email protected] wrote:

  You talked

  by [email protected]

  (https://forums.adobe.com/people/[email protected]?et=notification.mention//forums.adobe.com/people/ [email protected]? and = notification.mention) in Re: I use Photoshop CC and I

  problems to use the scanning feature strraigten and the cultures of the automaton. Another impression

  features work within the progrram, but no connection when I use don't automate.

  in Adobe Community - view [email protected]of reference for you

  (https://forums.adobe.com/message/8274458?et=notification.mention#8274458)

• Text disappears, when to perform a free transform

  I have Flash Professional CC build 14.1.0.96 and I am trying to do a free transform on text; However when I do this, the text disappears.

  
  

  Did I miss something?

  1) static text option is grayed out

  2) dynamic text option is the only option I choose, but 'embed my police' is also greyed out.

  How can I not gray these options?

  Kind regards

  Reggie.

  p.s. Is it a bug?

  down to the voice unaccep

  I was using a html5 doc, and you cannot use static text with html5!