Cannot use or restore Vista after SP1 uninstall

Similar Questions

• Unable to change the base installation of Windows Vista Edition language family by using the restore Vista DVD

  I have Fujitsu Siemens ESPRIMO Mobile (laptop) with pre installed Windows Vista Home basic. It is in the English language.

  When I want to re-installed Vista using (supplied with Labtop) restore DVD, after the installation, it is in Arabic. I tried to change this language but I can't. Could you please help to solve this problem.

  Thank you

  Hello

  You will need to contact Fujitsu about this.

  You cannot change languages with Vista Ultimate and Enterprise.

  You can have a different result if you try reinstalling using this method.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Cannot use the tester AM after activation of Config MDS

  Hi experts,

  I use Jdev 12.1.3 and I try to use BC AM Tester after properly configuring my request to use the MDS, but I get this exception:

  SEVERE: MDS Configuration Exception encountered in parse ADF ConfigurationMDS-00035: cannot load the class: com.xxx.yyy.view.mds.MyUserCC.
  oracle.mds.config.MDSConfigurationException: MDS-00035: cannot load the class: com.xxx.yyy.view.mds.MyUserCC.
  

  
  

  MyUserCC is the class I added after you follow these steps: Sameh Nassar: MDS to Oracle ADF application application

  
  

  What I am doing wrong?

  
  Kind regards
  Jose.

  Check out the blog of Jobinesh binary: setting MDS to test business PDef compressiometre components is AM if it helps.

  In a former post office of Andrejus Andrejus Baranovskis Blog: browser running ADF BC inside Oracle 11 g Applications BPM it was mentioned another problem.

  Timo

• Cannot use any USB device after the upgrade from XP.

  Hi, I guess that's an old problem, just my computer from MESH 6 to upgrade to Windows 7, Upgrade Advisor said that there was no problems. Now, I can't use any usb device and the mouse either. Tried evertything and am frustrated. IN XP, there is no problem at all. It must be a Windows 7 thing
  Robin

  Hi, I guess that's an old problem, just my computer from MESH 6 to upgrade to Windows 7, Upgrade Advisor said that there was no problems. Now, I can't use any usb device and the mouse either. Tried evertything and am frustrated. IN XP, there is no problem at all. It must be a Windows 7 thing
  Robin

  Windows 7 handles USB devices very well.

  Please describe your problem in more detail. Tell us what means "cannot use any usb device and the mouse either. Exactly how do you try? What happens when you try? If you get an error message, please quote verbatim.

• Satellite A100 PSAA9A: Cannot use fingerprint & keys Fn after the new installation of Vista

  Hello

  I am currently using toshiba A100 PSAA9A initially running a winxp pro sp2.
  But recently I received a window Vista on the other computer manufacturing so I reformat and installed.

  But after the installation, I checked all driver devices and they are all installed correctly.
  But I can't use fingerprints, as well as the shortcut key by pressing Fn more

  does anyone have a solution to this?
  Thank you very much

  Thanks for the info

• Cannot use auxiliary keys keyboard after system restore

  I had to reload XP so I used reloading with the CD backup option.  I have an emachines keyboard that has additional, such as buttons that cut, paste, volume, etc., and after that I reloaded XP from the CD, these buttons not working.  The icon zHotkey in the folder WINDOWS from my hard drive, which allowed me to use it before restoration, isn't here, so now I can no longer use one of these buttons.  How can I get them back?

  You may be able to download a program the page of Technical Support and downloads of the eMachines keyboard driver.

• Satellite L300. How to restore Vista after replacing HARD drive?

  This hard drive died a week after I bought the laptop just for a month ago.

  Then, I favour toshiba wrote and said that it be fixed in the rehabilitation of specific local store.
  Then store made me a new hard drive, so the files have disappeared.

  There is not any operating system is installed there, and I was not even trying to create a before recovery disk.
  To restore the system to the L300, it must use its recovery disc, as soon as I hear?
  The original system is vista. When I tried to insert a xp disc, it showed error after all the loading "stop: 0x0000007b...". »
  Could someone tell me how to handle?
  Thank you very much!

  > There is not any operating system is installed there, and I was not even trying to create a before recovery disk.
  Bad, bad. Buddy. Generally, you need to create the recovery to the first disk using the laptop.
  T did not read the user manual? Didn't you see the reminder?
  It s always recommended to create the recovery disk!

  > I've heard to restore the system to the L300, it must use its recovery disk, right?
  Yes, you are right. In order to restore the Vista, you must use the recovery disc!

  > The original system is vista. When I tried to insert a xp disc, it showed error after all the loading "stop: 0x0000007b...". "Could someone tell me how to handle?
  I think that it does not work because of controller SATA HDD.
  Either you'll assign compatible SATA mode (in BIOS)
  Or you must include the Windows XP SATA drivers.

  Check the HowTo of this forum area to get some details how to integrate the SATA (AHCI drivers) in Win XP.

• How can I restore Vista after replacing hard drive?

  Hi I have a PC laptop toshiba stellite with basic windows vista preinstalled, I suffered a hard drive failure and I had to install a new hard drive, I did save the procedure hard disk original and recorded on the disc but the disc will not work on the new hard drive, I have still the product key for the original operating system can I how can restore the operating system to factory condition

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot use System Restore - error code 0x80070005

  I can't restore my computer to an earlier date as it comes back with the error code 0 x 80070005 suggesting that I disable the virus protection that I've done and tried again, same message appeared, I uninstalled the antivirus completely and always got the same message, I downloaded then the scanner from Microsoft which showed no problems with all the files even with a total sweep someone out there can offer advice please

  Moved from feedback

  Original title: error code 0x80070005

  Hello

  Thank you very much for your response, I am using windows 7.

  I managed to solve the problem by choosing a much earlier restore point, which suggests the problem was caused by a Microsoft Update.

  Kind regards

• Cannot use Windows restore

  Cannot restore to a previous restore point. Comes with
  All privileges or groups referenced are assigned to the caller

  Windows 7 Ultimate - do NOT use in the FIELD
  

  Hi pbabai,

  Here's how to change System Restore using Group Policy:

  1. click on Start.

  2. type gpedit.msc in the Search field and double-click gpedit.

  3. expand Computer Configuration, expand Administrative Templates, expand System, and then click System Restore.

  4. double-click on turn off System Restore and select Enable.

  5 double-click on disable the Configuration and select Enable.

  6. click apply, then OK.

  Let us know if that helps.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot use all .exe files after connecting ethernet cord

  Just got a new House and when I moved we bought a new router and has a different service provider, my computer works well when the Ethernet cable is not connected at startup, but if it connected when I start upward or after he used to let me use just about everything, including the Task Manager and windows update. the new router we use is the a n750 linksys.

  Windows 7 64 bit
  Intel core i7 - 3770 k cpu @3. 50 ghz
  RAM ddr3 16g

  Bob,

  Try connecting the cable Ethernet on another computer just to check if the problem reappears.

  Given that the question does not appear in safe mode, we will try to uninstall and reinstall the network drivers and check if it makes a difference.

  First, visit the computer manufacturer and download the latest maps for your computer network and save it to the desktop.

  -Remove the plug Ethernet from the computer.

  -Device type in the search Manager start and press to enter.

  -Browse the network adapters, right-click on the network adapter and click on uninstall. (Do the same for all riders shown under network adapters)

  -You may be asked to remove the drivers, press Yes and continue.

  -Restart the computer and then install the drivers that you have downloaded from the computer manufacturer.

  -Connect the Ethernet cable and check if you have the Internet connection.

  -Restart the computer once more and check if the problem reappears.

  Let us know the results.

• 'Cannot use this version of After Effects' with Yosemite

  I have Adobe CS6 installed on my computer and they all worked fine with Snow leopard, but by the time I got to Yosemite and tried to open After Effects I get this message:

  "You can't use this version of the"Adobe After Effects CS6"application with this version of Mac OS X."

  You have "Adobe After Effects CS6" 11.0. »

  All the other programs I've tried on Adobe CS6 works fine but After Effects does not open. I tried uninstalling and reinstalling, but I get the same message.

  After effects, it's my second most used on the Creative Suite program, how can I do?

  Apple support was useless and simply told me to ask Adobe.

  Install the update:

  After Effects on Mac OS X

• Cannot use the recovery function after an Installalation of Windows 7

  Hello

  I installed Windows 7 on my laptop.

  HP Pavilion dv5 1110eg

  After that, I tried to remove it with the recovery tool (don't ask my why).

  But when I want to start the Recovery Manager (esc-> F11) his boot to Windows instead of the backup Partition.

  I read Acsess thrue Linux-Live DVD but I can't launch the backup Partition!

  I formatted my main partition in the hope that loads of Bios, the recovery Partition, but it didn't.

  So my mommentary Situation is:

  -No operating system

  -No Acsess to the recovery feature

  Could someone help me?

  Edit:

  I forgot to say, that I did not have a recovery CD, because I baught the laptop on E - Bay and the last owner burned one of the 2 discs already. And I had no Chance to burn the first CD...

  HRM

  Message edited by HRM on 26/09/2009 11:01

  If you still work partition recovery, try to do as the active partition, I hope it works always.

  You can search for linux or tools BACK activate or install the Win7 folder in C and then use computer management do D (recovery partition) active rebort, without pressing F11, it doesn't automatically run a system recovery.

  Choose the setting that is installed at the factory and wait until she finished. As soon as it's over, make your own recovery discs.

• Dynadock U3.0 - cannot use the Ethernet port after update 8.1 Win

  Hello world

  I use a u3.0 dock Dynadock with my Vaio PCS 13.
  I'm not able to use the Ethernet port on the Dynadock since I updated my Windows 8.1 device update 1.
  Before that everything worked well.

  I'm not able to re-install the drivers correctly (tried 7.6m0, 7.5m2). While the game driver tries to start, I get an error message, Setup is not able to put a bunch of registry (SYSTEM\CurrentControlSet\Services\DisplayLinkGA\D evice1) keys (up to 0). (Image 1)

  If I ignore these messages and do not install the driver, the Ethernet port will not installed in Device Manager. (Image 2)

  If I try to install the driver manually (DisplayLink network adapter NCM), I'll get an error message that a driver has been found but that access has been denied. (Image 3)
  I started the safe mode and could install the driver. But if I reboot in normal mode, the machine could not be started.

  I also tried to disable UAC and I am logged on as administrator 'real '.

  Please find the attached messaged (in German) error:

  [picture 1]: http://picload.org/image/lcalwop/toshiba.png
  [Picture 2]: http://picload.org/image/lcalwoc/toshiba2.png
  [Picture 3]: http://picload.org/image/lcalwlg/toshiba3.png

  BTW: If I unzip the Installer (7.6m0) and install * inf for the good Fri & dev (4503) it still does not work...

  I put t know what to do anymore...

  Hello

  After upgrade to 8.1 Windows, you should also update the software/driver Display Link
  This is very important!

  The latest version of the driver can be downloaded here:
  http://www.DisplayLink.com/support/downloads.php

  Note: the old version must be removed!

• Satellite L855 - cannot use the function keys after the Windows 8.1 upgrade

  Hi all,

  After I upgraded my pc Windows 8.1 I can't use special keys use without the FN key.
  In the Toshiba HW setup utility, I put the right option in the tab keybord.

  Can someone help me?

  Thank you

  Before we start discussion tell us please you have upgraded your machine following the instructions of the Toshiba support page?