Cannot use 'Start Up' command on the menu with Fusion 8.1 Pro bar

Similar Questions

• Mac OS 10.8 VM cannot reach subnet VLANS / different from the host with Fusion 5

  I have a server of Mac Mini significantly improved, high-top of the range, operating behind a firewall, Zyxel USG.  As the host, the Mac Mini runs a server OS X 10.8 virtualized with VMware Fusion 5 (mainly as an e-mail server).  To avoid opening the ports directly to the host-MacMini and LAN1 to better customize security and settings area, I want to put the virtual machine on VLAN1.

  However, no package VLAN is pass to the virtual machine.  I tried two configurations:

  Home > VLAN1 in Network preferences > VMware Fusion set to network via VLAN1 bridge > comments "Ethernet" connects effectively to the VLAN1

  Home > (LAN1) Ethernet in Network preferences > set VMware Fusion to bridge network through LAN1 > comments > add VLAN1 to guest network preferences

  In both situations, * zero packets * make out of the VM/comments on VLAN1.

  My suspicion is that VMware Fusion 5 does not support packages VLAN marked.

  Advice/suggestions for how to get the virtual machine to join VLAN1 or really, just a different subnet?  Are there drivers tagging VLAN for VMware Fusion 5?

  The FIXED - partially, at least.

  It had to do with the package being truncated by VMware.  After I have configured VLAN1 on the host, and then in the hardware parameters, chose 'Jumbo Packet Size'.  Then I jumpered the VM via connection host VLAN1.  ALTO!  This works.

  However, trying to connect to the virtual machine as a direct customer of VLAN1 is always unsuccessful. The virtual machine which truncates the packets when it sends them between the host and the guest (and vice versa).  However, if tagging VLAN is the host to level (as I have it configured), then the virtual machine can communicate successfully on the VIRTUAL LAN.

• Black square in the menu with the words 'Command Prompt' next to the place

  Since my 1st question, I have followed your instructions, my computer works so well and it turns faster as it did when I 1st got it.  In any case, it's Saturday & I just got home and turned away and when I went on the start menu, I noticed this small black square in the menu with the words 'Command Prompt' next to the square. I clicked it and it opens as a small black w/white square letters coming from Microsoft Corp. All rights reserved. 2006 and the next line of a c:\Users\user>_ and the cursor blinking. Should I just leave that on the menu in case I have it use?

  It of your choice, will not make a difference anyway.  Windows stores most often/most recently used commands and puts them under the ORB start so that they are just a click away.  It is an element of convenience only, and you can delete items here by right-clicking on them and selecting "remove from this list.  This does not remove the program, just deletes the shortcut to the frequently used list.

  'sweetiep' wrote in the new message: * e-mail address is removed from the privacy... *

  Since my 1st question, I have followed your instructions, my computer works so well and it turns faster as it did when I 1st got it.  In any case, it's Saturday & I just got home and turned away and when I went on the start menu, I noticed this small black square in the menu with the words 'Command Prompt' next to the square. I clicked it and it opens as a small black w/white square letters coming from Microsoft Corp. All rights reserved. 2006 and the next line of a c:\Users\user>_ and the cursor blinking. Should I just leave that on the menu in case I have it use?

  http://answers.Microsoft.com/message/423d2082-1173-4ef0-a841-7586557a0d09
  Tags meta-tags: performance; windows_vista

  Saturday 7 April 2012 21:23:11 + 0000: CreateMessage sweetiep

• Cannot use any USB device after the upgrade from XP.

  Hi, I guess that's an old problem, just my computer from MESH 6 to upgrade to Windows 7, Upgrade Advisor said that there was no problems. Now, I can't use any usb device and the mouse either. Tried evertything and am frustrated. IN XP, there is no problem at all. It must be a Windows 7 thing
  Robin

  Hi, I guess that's an old problem, just my computer from MESH 6 to upgrade to Windows 7, Upgrade Advisor said that there was no problems. Now, I can't use any usb device and the mouse either. Tried evertything and am frustrated. IN XP, there is no problem at all. It must be a Windows 7 thing
  Robin

  Windows 7 handles USB devices very well.

  Please describe your problem in more detail. Tell us what means "cannot use any usb device and the mouse either. Exactly how do you try? What happens when you try? If you get an error message, please quote verbatim.

• Update for the application manager has failed. Impossible to reinstall. Cannot use my apps. Get the 43 error message when I try to re - install. Is it possible to fix this problem without a wipe and load?

  Update for the application manager has failed. Impossible to reinstall. Cannot use my apps. Get the 43 error message when I try to re - install. Is it possible to fix this problem without a wipe and load?

  Error 43 https://forums.adobe.com/thread/2070909

• I have a subscription, it's almost over, but I need to change plans and cannot select one I need in the menu plan for change, and I can't cancel. Is it possible to cancel it?

  I have a subscription, it's almost over, but I need to change plans and cannot select one I need in the menu plan for change, and I can't cancel. Is it possible to cancel it?

  Hello

  Please contact support by calling/chat for cancellation requests and billing queries:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  You can also check the help below document:

  https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  Please go through the Adobe - General conditions of subscription as well.

• ORA-22992: cannot use LOB Locators selected from the remote tables...

  Oracle 10.2.1.0.4
  Solaris 10
  
  We try to access a table in another database via a db_link.
  
  The table we are trying to access has a LOB.
  
  We get the following error: ora-22992: cannot use LOB Locators selected from the remote tables.
  
  Is there a way to get around this? We need the data in the BLOB field.
  
  Thank you.

  See on metalink:

  ORA-22992 has a workaround solution in 10 gr 2
  DOC - ID: 436707.1

  Werner

• installed elements 14 on new pc using windows 10 and all the menu commands are grayed out.

  I can't change the preferences.

  I can't restore catalog etc etc.

  I then installed on the same pc 12 elements, and that's OK--that is of the menu commands everything works as expected

  This can happen if you are using the eLive currently.

  If you are in the Organizer, try clicking on the Media tab and if you are in the Photoshop elements Editor, click the Quick tab and see if it helps.

  Thank you

  Blandine

• Cannot use Alt - Tab to change the program and that it causes another similar question of program

  Hello

  When I hold Alt and Tab close, it will bring up a menu for me to choose some programs.  But the problem is now this menu will not stay longer than 2 seconds, I release the key for sure.   And at the same time, my other program has the similar problem, when I left click it used to bring up a temporary menu and I would move and choose, since I have this program Alt - Tab, I have this problem on the program (Ninjatrader).

  I tried to disable all services in windows and the boot menu, nothing works.

  I remember the laptop starting up during midnight, and the next day he has this problem.

  It's very strange and interesting.    Would be - this hacker or some sort of glitch in windows vista?

  Thank you.

  Hi MoreYummy,

  1. what desktop theme you are using?

  First try this step below and check if the program selection menu will appear.

  Method 1

  Try pressing the keys CTRL + Windows + TAB. You can then press TAB to cycle through the windows. (You can also press RIGHT ARROW or ARROW down to navigate forward one window, or press LEFT ARROW or UP ARROW to navigate to the back office.) Press ESC to close Flip 3D.

  Using Windows Flip 3D
  http://Windows.Microsoft.com/en-us/Windows-Vista/using-Windows-Flip-3D

  Method 2

  Check if the problem persists in safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  Restart the computer to return to normal mode

  Method 3

  If the problem persists in safe mode, then it is possible that the system files are corrupted on the computer where the origin of the problem.
  I suggest that you run a SFC scan, which would be a system file corrupt on the computer search and replace.

  Scan SFC enforcement procedure:
  1. click on the Start button
  2. in the Start Menu, click all programs Accessories followed
  3. in the Accessories menu, right click on the command line option
  4. in the menu that appears, click on the option "Run as Administrator"
  5 If you have the enabled User Account Control (UAC) you will be asked to consent to the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.
  6. in the command prompt window, type: sfc/scannow then press enter
  7. a message is displayed to indicate that "the analysis of the system will start.
  8. be patient because the analysis may take some time
  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue
  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
  11 after the scan finished, close the command prompt window reboot the computer and check.
  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP 15-f111dx: laptop won't start or go to the menu of system recovery?

  So the other day I was cleaning off my laptop and I slipped the keyboard with a towel and I guess I pressed something I wouldn't because he went to a white screen and green-ish (the color of my windows theme 8) and I had to turn off because he wouldn't do anything.

  Now when I turn it on it has the loading of HP and said preparation of automatic recovery screen, but then it's just a black screen after a minute. I can go into the menu of the BIOS (F9) and the parameters of the system (F10), but I can not enter the page of system recovery. When I press the F11 key to make, it said system restore in the corner, but then it goes to the loading screen 'system recovery preparation' just and turns to a black screen.

  I ran a test of the system short on the menu diagnostics and it says verification of DST short of hard drive failed. I got the error code was U4TV68-7J3886-MFPV6K - T 60, 603. Any help here? I don't mind reset my computer to default settings, if that's possible, but I can't exactly go and buy a new laptop now.

  Thanks in advance!

  Short of DST = disk failure hard drive is not / is a failure and should be replaced. Unfortunately HP does not that easy in their later models. On laptops earlier it was open the service door on the bottom and replace the drive. Now, it requires a dismantling almost full access to the drive, as shown in the Service Guide and interview here:

  http://h10032.www1.HP.com/CTG/manual/c04763999

  You can buy a hard drive for $50-60, but if you're not handy with disassembly, you'll have to pay someone to replace. Repair of local pc shop, Best Buy, Staples, etc.

  http://www.Newegg.com/product/product.aspx?item=N82E16822236497

  http://www.Newegg.com/product/product.aspx?item=N82E16822236561

  BTW I hope you did your recovery media using software on the laptop. You will need to start the laptop and install Windows on a new drive. If this isn't the case, it will be an extra $ 40 for the purchase of HP.

  http://support.HP.com/us-en/mediaorder/HP-15-F100-notebook-PC/7280521/model/7450429/softwareitem/790413-002/STEP1?SKU=J9H11UA

• MIDlet: trackball with the exec command and the menu is not open

  Hello

  is there a way, in application MIDP, brand trackball to exec a command directly and the context menu is not open (which can be opened with the key of BB menu anyway)?

  Thank you

  I understand, but trackball manipulation is not a part of the MIDP feature, it is a part of the RIM API.

  If you want to control trackball click use RIM API to build the User Interface of your application.

• Satellite 2430-301: cannot use 2200BG WLan card because the switch is off

  Hello

  I have a Satellite 2430-301, which was not delivered with WLAN functionality. But I discovered, that there is a MiniPCI slot in the laptop.

  So, I bought an Intel® PRO/Wireless 2200BG Minipci card. After that I joined the card in the laptop, it has been detected by windows as a new network device. I downloaded and installed the drivers of Windows XP (because I have Windows XP installed on the laptop) of Intel (9.0.4.17) home page. The installation worked perfectly.

  Now I tried to connect to a wireless network, but the software Intel says that the card is on 'off '. So I changed the menu drop-down on "on", which resulted in a mistake in German: "Die Intel (r) PRO/Wireless-Netzwerkverbindung ist noch deaktiviert.» Aktivieren Sie sie über your Hardware-switch. "(which means something like 'network Intel (r) PRO/Wireless connection is turned off. Turn it on with the hardware switch. »).

  Although the switch was already in position "on", I spent several times - nothing important happened. The led next to the switch will not illuminate in both positions.

  Are there problems of incompatibility between "Toshiba Satellite 2430 301" and "Intel PRO/Wireless 2200BG?

  I did something wrong?

  Is - this darn broken hardware switch?

  Any suggestions?

  I would be really happy if someone could help me :)

  Thanks in advance,
  Thuriel

  Hello

  The hardware switch led should light up if the switch is on.
  In addition if you want to use the WiFi network you must go to the WLan with FN + F8 option.
  In addition, you must check the WLan card properties in Device Manager. Here, you enter the Advanced tab. In the field of property choose radio power option and select the value to on.

• Cannot use disk utility to create the partition of the free space on the external USB drive.

  I have a red 3 TB Western Digital drive in a USB hard drive docking station.

  The reader is GPT, and I have two volumes on it (a single volume is "Microsoft reserved", another volume is NTFS).

  The other part of my drive is 1.5 TB of free space. I want to create a new partition with free space so that I can put backups Time Machine encrypted external hard disk.

  I checked free space on the drive with my Windows machine:

  
  DISKPART> list disk
  
  Disk ### Status Size Free Dyn Gpt
  
  -------- ------------- ------- ------- --- --- 
  
  Disk 0 Online 167 GB 20 GB
  
  Disk 1 Online 465 GB 0 B *
  
  Disk 2 Online 2794 GB 1526 GB *
  
  DISKPART> select disk 2
  
  Disk 2 is now the selected disk.
  
  DISKPART> list part
  
  Partition ### Type Size Offset
  
  ------------- ---------------- ------- -------
  
  Partition 1 Reserved 128 MB 17 KB
  
  Partition 2 Primary 1267 GB 129 MB 
  
  DISKPART>
  

  DiskPart displays 2 partitions - a 128 MB and the other GB 1267 with 1526 MB of free space.

  I took the hard drive of my MacBook Pro running OS X El Capitan 10.11.3 and pulled towards the high disk utility, but for some reason, that it does not resemble the disk utility it is to see the free space, so I can't create a new volume.

  Here are a few screenshots:

  ... of the physical disk in disk utility (notice how it doesn't seem be all unallocated space on the disk to create a new volume):

  

  ... of the NTFS volume in disk utility:

  

  ... of information for the drive in disk utility:

  

  ... of information for the NTFS volume in disk utility:

  

  ... of the partitioning settings page. Notice how the sign is grayed out (I can't create another partition):

  

  

  I'm a new Mac user. My company recently gave me a Mac, so the first thing I want to do is to create a new partition on this external USB drive to put backups Time Machine figures on it.

  In the research I did find a way to do it on a mac computer without erasing the drive and starting over. But you can go to your windows computer and partition the free space of disks. Then use the mac to set the free space as mac os extended journaled. Here's what I found. http://www.PCWorld.com/article/2066191/how-to-partition-a-hard-drive.html the only other way would be to copy the file on the external drive, somewhere, so you can delete it and re partition for windows and mac. Then reinstall windows files. I'm not familiar with windows systems.

• Cannot use laptop computer Microsoft on the new account.

  I have a month old acer aspire v7-582pg, and I've never been able to link my Microsoft account. Whenever I add my Microsoft account, I get a message saying: Please wait that doesn't go away after putting my password in. I end up having to delete my account and create a new one without an attached e-mail. I tried to link several times, but continues to be the same thing. Any ideas would be much appreciated.

  give a check here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/Windows-81-hangs-on-please-w...

  It seems a problem with skydrive aka onedrive:

  1. connect to the affected account
  2. Press the Windows key + L to lock the computer
  3. Switch to a user who has administrator privileges account
  4. Open the Task Manager and switch to the 'Processes' tab (press 'More details' If a process tab does not appear)
  5. find restoreoptin.exe & end task this process
  6. return to the affected account (Start Page, click on your account/image name, click the account that you want to pass to)
  7. Open the menu of charm (windows key + C), select 'Settings', and then change the settings of PC
  8. Select Skydrive
  9. Change the storage file, Camera Roll, and synchronization parameters (not sure which one that does the trick)
  10. logout and log back in
  11. you will be asked is no longer with the blank screen 'Please wait '.

• Satellite A100 PSAA9A: Cannot use fingerprint & keys Fn after the new installation of Vista

  Hello

  I am currently using toshiba A100 PSAA9A initially running a winxp pro sp2.
  But recently I received a window Vista on the other computer manufacturing so I reformat and installed.

  But after the installation, I checked all driver devices and they are all installed correctly.
  But I can't use fingerprints, as well as the shortcut key by pressing Fn more

  does anyone have a solution to this?
  Thank you very much

  Thanks for the info